Browse by Fields of Research (ANZSRC 2008)

Hoang, Hung (2016) Automatic Circuit Recloser (ACR) communications using P25 RMU (Radio Modem Unit). [USQ Project]

Wentworth, B. (2016) Circuit breaker simulated operation & behaviour under faulted power system conditions. [USQ Project]

Fergusson, Paul (2016) Light Fidelity (Li-Fi) prototype with Raspberry Pi. [USQ Project]

Dortmans, Justin (2016) Overcoming asymmetrical communication delays in line current differential protection circuits. [USQ Project]

Stephens, Benjamin (2016) Sensor to improve detection of line break or earth faults for Victorian answer lines. [USQ Project]

Graham, Sharon (2015) Investigation into the economic feasibility of grid-tied photovoltaic panel and storage systems. [USQ Project]

de Freitas Pessoa, Daniel (2015) STATCOM DC bus voltage control and switching strategy analysis. [USQ Project]

Kirby, Christopher (2015) Comparison of PV maximum power point. [USQ Project]

Field, Shaun (2015) Machine vision and sensing with an Android. [USQ Project]

Anumula, Sreekanth (2014) Communications for smart grid substation monitoring using WIMAX protocol. [USQ Project]

Marland, Michael (2014) Alternatives to SF6 in HV circuit breaker insulation. [USQ Project]

Dugdale, Paul Nicholas (2014) Arc flash protection of a low voltage motor control centre. [USQ Project]

Keys, Callum Kirby (2014) Mansell power lifter control circuitry redesign. [USQ Project]

Yadav, Orunganti Vara Prasad (2014) Voltage control in micro-grids. [USQ Project]

Skillington, Robert George (2013) DSP based lock-in amplifier. [USQ Project]

Barrett, Roland (2013) Operating temperature of current carrying copper busbar conductors. [USQ Project]

Pasanduka, Timothy (2013) Systematic procedure to determine line current differential relay settings with back up distance for a 500 kV ac three phase line. [USQ Project]

Duffy, Michael Anthony (2012) Investigation into the impacts on 11kV feeder operation as a result of the increasing use of amorphous core transformers. [USQ Project]

Palmer, John Michael (2012) Wireless LAN based infrared remote control. [USQ Project]

Cox, Adam (2011) Stereo vision for webcams. [USQ Project]

Mowat, David (2010) Callide C Power Station's generator protection system 'ride through capabilities' for various external faults. [USQ Project]

Miller, Justin (2010) Design of a wireless acquisition system for a digital stethoscope. [USQ Project]

Coggan, Robert Walter (2010) High impedance earth fault modelling. [USQ Project]

Pijpers, Louis Kennedy (2008) Design and implementation of a microprocessor-controlled BMX start gate. [USQ Project]

Kang, Boon Geh (2007) Wall climbing robot. [USQ Project]

Bollaart, Clement (2007) OPC cycle time analyser. [USQ Project]

Mackenzie, Matthew Robert (2007) PID controller optimisation using genetic algorithms. [USQ Project]

Mohamed Ibrahim, Saifudin Bin (2005) The PID controller design using genetic algorithm. [USQ Project]

Costa, Michael (2005) In-vehicle display system. [USQ Project]

Toh, Pei Ling (2004) Interactive web-based signal processing tutor. [USQ Project]