Items where Year is 2008

Thesis (Non-Research)

Rose, Lauren (2008) Positive affect and life satisfaction in Australian adolescents. Doctorate (other than PhD) thesis, University of Southern Queensland. (Unpublished)

USQ Project

Adams, Nicholas John (2008) The pedestrianisation of inner city Toowoomba. [USQ Project]

Alanne, Glen (2008) Developing a model to predict water main failures. [USQ Project]

Arnold, Matthew David (2008) A two-dimensional analysis of the bearing capacity of footings near slopes. [USQ Project]

Bissett, Michael James (2008) Investigation on utilising real time kinematic (RTK) global navigation satellite systems (GNSS) for electronic distance measurement (EDM) baseline calibration and traceability of measurement. [USQ Project]

Black, Jamie Richard (2008) Validation of the Sydnet, continuously operating reference stations for use in global navigation satellite system surveying. [USQ Project]

Boskovic, Selina (2008) Bioretention basin best practice design guidelines. [USQ Project]

Carden, Scott Benjamin (2008) The development of an antigravity arm to assist in the rehabilitation of stroke patients. [USQ Project]

Cech, Samuel (2008) The commercial implications of the NZ surveyor-general's rules for cadastral survey 2008. [USQ Project]

Cecil, Travis (2008) Investigate the best percentage by weight of glass powder, as fillers in phenolic resins using tensile tests. [USQ Project]

Cleary, Edward Thomas (2008) Pulsed liquid jet for rock breaking. [USQ Project]

Clemence, Andrew John (2008) Error resilient JPEG2000 transmission over wireless fading channels. [USQ Project]

Crawford-Ross, Michael Richard (2008) Control of accumulator in a continuous processing line. [USQ Project]

Curran, Liam Patrick (2008) Global navigation satellite systems for geodetic network surveys. [USQ Project]

Donohue, Rachael Michelle (2008) Inspiring high precision dam water depth measurement with novel 'bubbler’ designs. [USQ Project]

Dorahy, Will Paul (2008) A comparison of remotely sensed terrestrial spatial information. [USQ Project]

Drysdale, Dirk MacDonald (2008) The effectiveness of an aerofoil shaped pier reducing down stream vortices and turbulance. [USQ Project]

Fraser, Mark John (2008) Analysis of a no-till toolbar for a two wheeled tractor. [USQ Project]

Gardner, Craig (2008) Carbon nanotubes (CNT) as potentially a more effective material for photovoltaic (PV) converters. [USQ Project]

Gibson, Duane Nikalia (2008) Interaction of recycled concrete and geogrid reinforcement material 14m high reinforced earth wall. [USQ Project]

Goodall, Joshua Edward Allan (2008) The effect of the 50km/h implementation on local streets in Toowoomba. [USQ Project]

Hardy, Glen (2008) Investigation into the performance of first flush systems for diesel engine based pollution on roof runoff. [USQ Project]

Harris, Bruce Robert (2008) South East Queensland waterways, land use and slope analysis. [USQ Project]

Heng, Fook Hai (2008) 3D Terrestrial laser scanning for application in earthwork and topographical surveys. [USQ Project]

Hetherington, Chris (2008) Effectiveness of real time kinematic global navigation satellite system suveying (RTK GNSS). [USQ Project]

Howard, Damian John (2008) Determination of property boundaries in NSW where monument movement has occurred. [USQ Project]

Hugo, David (2008) Speech compression system for student feedback. [USQ Project]

Huston, Thomas Clifford (2008) Investigation on the adequacy of disinfection in Toowoomba's water supply network. [USQ Project]

Jesshope, Ashlee Elizabeth (2008) Bike tour plan for Toowoomba region. [USQ Project]

Kelman, Oliver (2008) Measuring and monitoring of grain silos using laser scanning and total stations. [USQ Project]

Kenna, Brian (2008) Water metering and revenue protection. [USQ Project]

Lamari, Alfio Concetto (2008) Rolling stock bearing condition monitoring systems. [USQ Project]

Lauder, Paul (2008) Performance evaluation of low-density parity-check codes. [USQ Project]

Lear, Foster Robert (2008) Hoist system for small boat stacker. [USQ Project]

Long, Geoffrey Michael (2008) Deriving land use and land cover maps from 2.5m SPOT 5 imagery. [USQ Project]

Marais, Tom (2008) Virtual reference station (VRS) in South Africa. [USQ Project]

Mayo, Benjamin Marc (2008) A Review of a cadastral boundary adjustment software program. [USQ Project]

Mead, Nicola (2008) Investigation of domestic water end use. [USQ Project]

Mendis, Marina Shanil (2008) Functional observer for glucose regulation. [USQ Project]

Menetrier, Paul L. (2008) Machine vision based traffic monitoring with real time tracking. [USQ Project]

Miller, P. (2008) Building a two wheeled balancing robot. [USQ Project]

Muorwel, Reec Rodolfo (2008) Supervisory control of material handling conveyor belt system. [USQ Project]

Nixon, Robert Jeffrey (2008) Investigation of the best percentage, by weight, of glass powder as filler in phenolic resin using three point bending test. [USQ Project]

Ole, Zayne Kristian (2008) Track stability and buckling - rail stress management. [USQ Project]

Padda, Ranjit Singh (2008) Air flow through two layered mesh at varying porosity and spacing. [USQ Project]

Paech, Simon (2008) Human electromagnetic radiation exposure. [USQ Project]

Pickford, Jeffrey (2008) How to establish map projections to facilitate the use of GPS on ground-based surveys. [USQ Project]

Pijpers, Louis Kennedy (2008) Design and implementation of a microprocessor-controlled BMX start gate. [USQ Project]

Prasser, Nathan (2008) The development of a computer based system for the rehabilitation of arm movements of stroke patients. [USQ Project]

Rohde, Craig (2008) Preliminary water balance models of the Daly river catchment. [USQ Project]

Salomon, David Scott (2008) Position control using a digital servo system. [USQ Project]

Sawchuk, Mike (2008) Flexural strength SLG-reinforced phenolic composites cured in microwaves. [USQ Project]

Shann, Blaise N. (2008) Variable rate bitumen spraying in road construction and resurfacing. [USQ Project]

Shekhar, Shashi (2008) Tensile strength of sawdust reinforced phenolic resin composite materials. [USQ Project]

Shellshear, Michael Stuart (2008) Urban stormwater treatment using chitosan. [USQ Project]

Springall, Glenn (2008) Design and implementation of a remotely accesible inrush current testing package for power (distribution)transformers. [USQ Project]

Steger, Jason P. (2008) Deriving transformation parameters for existing survey co-ordinate systems in the Australian Capital Territory. [USQ Project]

Stevenson, Cameron Laurence (2008) Improving information management & project proposal automation at Data#3. [USQ Project]

Strong, Simon James (2008) Design of a small wind turbine. [USQ Project]

Tart, Benjamin (2008) Simulation of GPS car navigation systems in evaluating the impact of poor quality road data. [USQ Project]

Taylor, Scott (2008) Development and testing of a portable GNSS network solution using the magellan propark3. [USQ Project]

Taylor, Timothy Noel (2008) Rural arterial road operating speed assessment. [USQ Project]

Thompson, Robert William (2008) Centreline tools upgrade. [USQ Project]

Vincec, Paul Michael (2008) Feasibility study: into the design, effectiveness & limitations of installing raingardens within an inner urban environment. [USQ Project]

Wai-Ming, Yeung (2008) Confirmation program of safety inspection of lift components (CPSI). [USQ Project]

Waldock, David A. (2008) The maintenance of 'moment continuity' within structural concrete beam steps. [USQ Project]

Walters, Kieren A. (2008) Investigation of construction practices and test procedures for road pavements on expansive subgrades. [USQ Project]

Walton, Joshua Graeme (2008) Investigation of a variable ride height suspension for an automobile. [USQ Project]

Watson, Joshua Francis (2008) Investigation of the bearing capacity of shallow footings located near slopes. [USQ Project]

Watt, Andrew Thomas (2008) Validation of cooling grid model and testing of alternatives. [USQ Project]

Whiteford, Mark (2008) Relationship contracting in the mineral processing industry. [USQ Project]

Yavu, Isei Ledua (2008) Fracture toughness of phenolic resins composite by using saw dust as filler of percentage by weight. [USQ Project]

Zong, Xuejin (2008) Investigation of the best percentage by weight of glass powder as fillers, in phenolic resins using flexural tests. [USQ Project]