Items for Faculty/School / Institute/Centre :
Historic - Faculty of Engineering and Surveying - Department of Surveying and Land Information (Up to 30 Jun 2013)

Up a level
Export as [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors Name | Date | Item Type
Jump to: A | B | C | D | F | G | H | I | J | K | L | M | N | O | P | R | S | T | W
Number of items: 122.

A

Arnison, Christopher John (2009) Using ground penetrating radar (GPR) with multiple pass scans to improve 3D positional reliability of subterranean features. [USQ Project]

Almenhali, Salem (2004) Mapping the distribution of general practitioners and their billing pattern in the Toowoomba District. [USQ Project]

B

Brice, Joshua (2009) An investigation into the Victorian permanent survey mark infrastructure. [USQ Project]

Blaby, Bradley Peter (2009) Re-establishment of the state border between New South Wales and Victoria. [USQ Project]

Bissett, Michael James (2008) Investigation on utilising real time kinematic (RTK) global navigation satellite systems (GNSS) for electronic distance measurement (EDM) baseline calibration and traceability of measurement. [USQ Project]

Black, Jamie Richard (2008) Validation of the Sydnet, continuously operating reference stations for use in global navigation satellite system surveying. [USQ Project]

Breddin, Ian Stewart (2007) Property rights and the littoral zone in Queensland. [USQ Project]

Brandon, Paul (2006) Quality assurance. [USQ Project]

Beer, Craig (2006) Quality assurance system in a small surveying firm. [USQ Project]

Bryde, Andrew Robert (2006) Terrestrial photo modelling. [USQ Project]

Barney, Debra Kaye (2004) Identification mapping and evaluation of timber bridges in the Wide Bay District. [USQ Project]

C

Caudell, Clinton Frank (2010) Visualising traditional boundaries in Papua New Guinea using GIS 'zones of uncertainty'. [USQ Project]

Campbell, Andrew Charles (2009) Deriving a high resolution DEM from ALOS PRISM data. [USQ Project]

Camplin, Tony (2009) Development of methods to monitor continuously operating reference station antenna stability. [USQ Project]

Coaker, Leigh Herbert (2009) Reflector-less total station measurements and their accuracy, precision and reliability. [USQ Project]

Curran, Liam Patrick (2008) Global navigation satellite systems for geodetic network surveys. [USQ Project]

Cech, Samuel (2008) The commercial implications of the NZ surveyor-general's rules for cadastral survey 2008. [USQ Project]

Carter, Andrew William (2006) Application of geographical information system in underground coal mine to assist operational management. [USQ Project]

Clague, Stephen John (2005) Investigation of relationships between skid resistant deficient pavement and aggregate by GIS and statistical analysis. [USQ Project]

Clerke, Adam (2004) Determination of mean high water mark within New South Wales. [USQ Project]

Chua, Chun Siong (2004) Testing of robotic total stations for dynamic tracking. [USQ Project]

D

Day, Michael Peter (2010) The implications regional ecosystem mapping has on land development proposals in rural Queensland. [USQ Project]

Deas, Scott (2009) The accuracy of published co-ordinates on the 'Survey Mark Enquiry Service’(SMES)in Victoria using GPS observations. [USQ Project]

Day, Anthony (2009) Investigation into the causes and possible remedies for the registered surveyor shortage in regional Queensland. [USQ Project]

Dunwoody, John Ernest (2009) Detection of Greater Bilby (Macrotis lagotis) habitat in South-West Queensland using remote sensing imagery and geographic information systems. Coursework Masters thesis, University of Southern Queensland. (Unpublished)

Dorahy, Will Paul (2008) A comparison of remotely sensed terrestrial spatial information. [USQ Project]

Dunwoody, John Ernest (2007) Spatial analysis of woody vegetation land cover change in Crows Nest Shire, QLD. [USQ Project]

F

Fritsch, Mark Timothy (2006) Non-trible GPS receivers and virtual reference stations (VRS). [USQ Project]

Falken, Jason (2005) Critical review of techniques for rigid spoolpiece metrology observation and reduction. [USQ Project]

Fenwick, Wayne (2005) Evaluation of control for the adjustment of the digital cadastral data base (DCDB). [USQ Project]

G

Gelding, Peter William (2010) Prioritising locations for investment based on threats to reptiles and ecosystems within the Condamine Catchment. [USQ Project]

Goodwin, Brent (2009) Analyse original marks and occupation used to reinstate boundaries for identification surveys. [USQ Project]

Garget, Dennis (2005) Testing of robotic total stations for dynamic tracking. [USQ Project]

Gibson, John Martin (2004) Mapping of an old mine site for heritage purposes. [USQ Project]

H

Heit, Andrew (2011) An investigation into the parameters that affect the swell factor used in volume and design calculations at Callide open cut coal mine. [USQ Project]

Huntley, Matthew Mark (2010) Mapping cycling pathways and route selection using GIS and GPS. [USQ Project]

Hosking, Alan (2009) Investigation into the effectiveness of reflectorless technologies on structural surveillance monitoring. [USQ Project]

Hopson, Matthew (2009) SCADA and RFI interference on RTK surveys. [USQ Project]

Heng, Fook Hai (2008) 3D Terrestrial laser scanning for application in earthwork and topographical surveys. [USQ Project]

Howard, Damian John (2008) Determination of property boundaries in NSW where monument movement has occurred. [USQ Project]

Hetherington, Chris (2008) Effectiveness of real time kinematic global navigation satellite system suveying (RTK GNSS). [USQ Project]

Harris, Bruce Robert (2008) South East Queensland waterways, land use and slope analysis. [USQ Project]

Harch, Nelson (2006) Testing mapping grade GPS carrier phase accuracy. [USQ Project]

Holloway, Stephen John (2006) The effect of wide open bays on legal boundaries. [USQ Project]

Heit, Jamie (2005) Quality assurance for virtual reference stations. [USQ Project]

I

Inglis, Rientz (2006) Evaluation of VRS-RTK GPS latency in a dynamic environment. [USQ Project]

J

Jones, Simon (2010) Stop-go mobile mapping. [USQ Project]

Jones, Jeffrey Francis (2009) Comparison of robotic total stations for scanning of volumes or structures. [USQ Project]

Johnston, George Finlay (2007) Wildlife vehicle collision GIS mapping & modelling. [USQ Project]

Jacobs, Peter Gregory (2005) Assessing RTK GPS for a suburban survey practice. [USQ Project]

Jin, Tao (2005) GIS for house hunters: a case study in Toowoomba. [USQ Project]

K

Klibbe, Christopher Aaron (2010) An investigation on the high water mark as a land boundary. [USQ Project]

Kiongoli, Said (2010) Testing the accuracy of machine guidance in road construction. [USQ Project]

Koschel, Michael (2009) Investigation into reliability of AUSPOS coordinate data (specifically height). [USQ Project]

Kelman, Oliver (2008) Measuring and monitoring of grain silos using laser scanning and total stations. [USQ Project]

King, Joshua (2006) Dynamic tracking of a race car. [USQ Project]

Knox, Donna (2004) 3D terrain visualisation and virtual fly-through for tourism conservation using Geographic Information Systems (GIS). [USQ Project]

L

Lonard, Craig Stephen (2012) Urban fringe agriculture and its potential contribution to sustainable cities: a case study of Western Sydney. [USQ Project]

Ledger, Allen (2011) The development of a high precision terrestrial laser scanner calibration range at USQ. [USQ Project]

Lenton, Paul (2011) Use of near-infrared photogrammetry to determine crack and surface deformation in small structures. [USQ Project]

Ling, Damian James (2009) Investigation of the Riegl terrestial scanners - uses and limitations. [USQ Project]

Lascalles, Alex (2009) Potential impact of rising sea level on land ownership and government planning. [USQ Project]

Long, Geoffrey Michael (2008) Deriving land use and land cover maps from 2.5m SPOT 5 imagery. [USQ Project]

Lawless, Daniel Patrick (2006) Defining non-tidal riparian boundaries. [USQ Project]

M

Marion, Michael (2011) A comparison of AUSGeoid09 and AUSGeoid98 in the Hawkesbury Valley. [USQ Project]

Morris, Mike (2011) Implementation of electronic measurement and recording of strata title field notes. [USQ Project]

McDonald, Matthew (2011) Investigation into the limitation of measuring to 360 Degree prisms using automatic target recognition technology. [USQ Project]

Maher, Daniel (2011) Projection of computer design data onto digital photographs. [USQ Project]

Millard, Aaron (2011) Property rights, cadastral boundaries & coastal erosion in New South Wales. [USQ Project]

Madden-Holmes, Ben (2010) An investigation into the legislative changes affecting tidal boundaries in Queensland. [USQ Project]

Morrison, Scott James (2010) The development and testing of a high precision ellipsoidal - Australian height datum deformation grid for real time GPS applications. [USQ Project]

Mulliss, Michael Stephen (2009) A review of the application of adverse possession within the Torrens system of land regulation in Australia. [USQ Project]

Munro, Frazer (2009) Localised geoid modelling using GPS and precise levelling data. [USQ Project]

Mayo, Benjamin Marc (2008) A Review of a cadastral boundary adjustment software program. [USQ Project]

Marais, Tom (2008) Virtual reference station (VRS) in South Africa. [USQ Project]

Mohr, Logan (2007) Effects and controls of lateral refraction in underground coal mines. [USQ Project]

Mylne, George (2007) The effectiveness of a multiple-frequency global navigation satellite system (GNSS)on multipath mitigation. [USQ Project]

McCosker, Daniel Patrick (2006) Guidelines for the use of electronic survey field notes and CAD computation files as legal records. [USQ Project]

Maseko, Mfana Elphus (2005) Restitution of land for agricultural development Ehlanzeni region Mpumalanga. [USQ Project]

McGovern, Mark (2005) Spatial analysis of Tasmanian Devil facial tumour disease. [USQ Project]

Masters, Jason Scott (2004) GIS based cadastral planning. [USQ Project]

MacGregor, Cameron Scott (2004) Risk mapping in the Condamine River catchment basin. [USQ Project]

McDonald, Adam John (2004) Which geoid model should be used for GPS heighting on the Toowoomba bypass project? [USQ Project]

N

Nixon, Phillip (2011) Using sun observations to set an azimuth combining and comparing Automatic Target Recognition in a Total Station with GPS observed time and position. [USQ Project]

O

O'Shea, Darren (2009) Proposal to incorporate volumetric (three dimensional) subdivisions in Victoria. [USQ Project]

Oliver, Anthony James (2004) Relevance of identification surveys in N.S.W. conveyancing. [USQ Project]

P

Penman, Brian (2011) Calculation and comparison of the noise and latency of RTK observations using radio link and NTRIP. [USQ Project]

Pickford, Jeffrey (2008) How to establish map projections to facilitate the use of GPS on ground-based surveys. [USQ Project]

Pejakovic, Derek (2006) Theatre booking system. [USQ Project]

Pena, Mario de la (2005) Historical identification and mapping. [USQ Project]

Pinkham, Daniel (2004) Investigation into the placement and connection of permanent survey marks for cadastral surveys. [USQ Project]

R

Rolph, David Gordon (2006) A comparison of DGPS correction sources in South Eastern Queensland. [USQ Project]

Reynolds, Jeremy (2006) Accuracy assessment of VRS in a dynamic environment. [USQ Project]

Reynolds, Wade (2006) Mapping greens at City Golf Course. [USQ Project]

Rizzo Naudi, Antonello (2005) A quality assurance system at the Land Survey and Mapping Unit (Malta). [USQ Project]

Rasphone, Akchousanh (2004) The analysis of Neighbourhood Watch structure using Geographic Information System (GIS). [USQ Project]

S

Strahley, Matthew (2011) A comparison of depth sounder positioning techniques for hydrographic/bathymetric surveys. [USQ Project]

Stanley, Matthew (2010) An investigation into the Australian height datum on Ballina Island. [USQ Project]

Surtees, Mark Stephen James (2009) Bathymetric survey of flooded open cast mine workings. [USQ Project]

Smith, Anthony Patrick (2009) Surveying and the law. [USQ Project]

Steger, Jason P. (2008) Deriving transformation parameters for existing survey co-ordinate systems in the Australian Capital Territory. [USQ Project]

Sinderberry, Mark (2007) Accuracy assessment of 3D laser scanning data utilising different registration methods. [USQ Project]

Stoeckl, Wayne Edmund (2006) Viability of a coordinated cadastre in New South Wales. [USQ Project]

Shaw, Neil Geoffrey (2006) Evaluation of Ashtech ProMark2 survey system. [USQ Project]

Stimela, David Master (2005) Developing a methodology using multi spectral remote sensing data for mapping vegetation change - a key variable in soil erosion mapping. [USQ Project]

Stephens, James Finlay (2004) Accuracy evaluation of 3-D laser imaging scans. [USQ Project]

T

Temple-Watts, Philip (2011) An investigation into the suitability Of volunteered information to create a flood extent map. [USQ Project]

Taylor, Scott (2008) Development and testing of a portable GNSS network solution using the magellan propark3. [USQ Project]

Tart, Benjamin (2008) Simulation of GPS car navigation systems in evaluating the impact of poor quality road data. [USQ Project]

Temple, Christopher Jed (2007) Impediments to identifying freehold land rights in N.S.W. [USQ Project]

Trent, Stephen Wade (2005) A habitat suitability index model for the trapdoor spider species, 'Arbanitis variabilis'. [USQ Project]

Tanoi, Levei (2005) A model to establish a global navigation satellite system (GNSS) testing and validation center at the University of Southern Queensland. [USQ Project]

Tozer, Paul (2005) Assessment of the feasibility of a terrestrial scanner in underground and surface mining at BHPB Cannington mine. [USQ Project]

W

Wilson, Wayne (2011) Housing affordability in Roma: can progress be made within the regulatory and policy framework? [USQ Project]

Weyman-Jones, Ashley (2010) An investigation into the accuracy and limitations of automatic target recognition in total stations. [USQ Project]

Wady, Vaughan (2009) An investigation of land and property information (NSW) proposed E-Plan process of digital survey plan lodgement in LandXML format. [USQ Project]

Wall, Adrian (2009) The use of a terrestrial laser scanner in an open cut mining environment. [USQ Project]

Worrall, Andrew (2007) Development of quality assurance procedures for cadastral surveying using GPS technology. [USQ Project]

Wallace, Darren James (2006) Water and wastewater strategic township plan Warragul, Victoria. [USQ Project]

Wilson, David Orme (2005) The resolution of uncertain boundaries at Amity Point (North Stradbroke Island). [USQ Project]

Wong, Alan (2005) Using GIS to explore the relationship between road grade and accidents. [USQ Project]

Wilcox, Colin Gordon (2004) The private surveyor as a spatial data custodian in the local community. [USQ Project]

This list was generated on Thu Nov 21 13:41:54 2024 AEST.