Items for Faculty/School / Institute/Centre :
Current – Faculty of Health, Engineering and Sciences - School of Engineering (1 Jan 2022 -)

2025

De la Pena, Mario (2025) Assessment of Issues in Using Advanced Sustainable and Recycled Engineering Materials. [USQ Project]

Johnson, Simeon (2025) Experimental Analysis on Flowability Characteristics of Graphene Powder Using Carr Indices. [USQ Project]

Vasudevan, Aneesh (2025) Can High-Fidelity Photorealism Provided by Unreal Engine 5 Bridge the Synthetic-to-Reality Gap for Improved Multi-Rotor Drone Detection? [USQ Project]

2024

Cuskelly, Matthew (2024) Friction and Wear Analysis of Biodegradable Lubricants used with Engine Components. [USQ Project]

Hold, Damon (2024) Optimised Roof Cavity Ventilation Solutions for Sustainable Living in Australia. [USQ Project]

Davis, Lachlan J. (2024) A Capable and Effective Watering System for an Intensive Beef Cattle Covered Housing Arrangement. [USQ Project]

Kumar, Niraj Nitesh (2024) Advanced Numerical Simulation of Rock Joints Load Transfer Mechanisms Under Various Geotechnical Conditions. [USQ Project]

Brandt, Luke (2024) An Environmental Controls Analysis for a Vanadium Redox Flow Battery (VRFB). [USQ Project]

Essery, Scott (2024) Automated Mammal Nest Box Protection. [USQ Project]

Jackson, Lachlan (2024) Automated Stuttering Detection to Assist Speech Pathologists. [USQ Project]

Kafer, Scott (2024) Automated Surface Irrigation System Prototype Using Industrial Equipment. [USQ Project]

Eustace, Thomas (2024) Boston Dynamics Spot gripper attachment development. [USQ Project]

Knipe, Joshua (2024) Cognitive Radio for Microwave Spectrum Access. [USQ Project]

Beaman, Cameron (2024) Computational intelligence for financial applications. [USQ Project]

Fox, Harrison (2024) Conceptual Design of an Ultra High-Performance and Durable Wheelchair for Recreational Outdoor use. [USQ Project]

Ali, Majid (2024) Concrete Mix Design using recycled PET Plastic as a Partial Replacement of the Natural Fine Aggregate. [USQ Project]

Jones, Daniel M. (2024) Design, Detail, Manufacture, & Testing of Prototype Telescopic Hydraulic Cylinder for S1000 Drill Rig Feed Frame. [USQ Project]

Christopher, Brad (2024) Dynamic Assessment of System Inertia in Emerging Transmission Networks in Real Time. [USQ Project]

Healy, Jessica (2024) Effective deployment of Courtesy Speed Display Signs in a small town in Australia. [USQ Project]

Khurshid, Nihal (2024) Effectiveness of 'Towards Zero' Framework for preventing fatalities and minimising crashes on Metropolitan NSW Roads. [USQ Project]

Frost, Callum (2024) Experimental Investigation of a Low-Cost, Centrifugal Pump Cavitation Detection System. [USQ Project]

Conroy, Andrew (2024) Finite Element Modelling of Coal-Seam Gas Well Pumping Assembly for the Prediction and Prevention of Tubing Wear. [USQ Project]

Borrick, Daniel (2024) FSAE Autonomous Racing Development. [USQ Project]

Jedniuk, Andrew (2024) Heavy vehicle rollovers at roundabouts on high-speed roads. [USQ Project]

Gambin, Monique (2024) Impact of Pavement Material for Flood Resistance on Rural Roads. [USQ Project]

Duncan, Bailey (2024) Internal combustion engine fuel vibration analysis. [USQ Project]

Carr, Scott (2024) Investigation of Web-Based Technologies in the Development of Full-Stack, Small to Mid-Sized Distributed Industrial Control Systems. [USQ Project]

Davey, Kieran B. (2024) Low-Cost Control System for Pop-Up Escape Room. [USQ Project]

Cobb, Keegan J. (2024) Measurement of Aerodynamic Forces on a Partially Constrained Model in a Hypersonic Flow. [USQ Project]

Coco, David (2024) Mini Jet Engine Performance testing using Alternative Fuels. [USQ Project]

Harris, Timothy (2024) Nitrogen Loading Ram Reliability Project for 10E10 Pulverised Fuel Mill. [USQ Project]

Campbell, Robert (2024) Optimising Time Trial Helmet Design for Enhanced Aerodynamics in Cycling Through CFD Techniques. [USQ Project]

Jago, Hayden (2024) Peak flow estimation considering future climate scenarios for flood resilience modelling of the Warrego Highway at Laidley Creek. [USQ Project]

Hubner, David R. (2024) Rural Road Design Verification Model in Local Government Queensland. [USQ Project]

Barrett, Jye (2024) Shear Behaviour of Sandy Clay Infilled Rock Joints. [USQ Project]

Hallajian, Jamal (2024) Simulation of Carbon Dioxide Dispersion Using Computational Fluid Dynamics. [USQ Project]

Connor, Stephen J. (2024) Using non-synchronous generation with grid forming ability to improve the response time during a system restart of the Queensland Electricity Network. [USQ Project]

Coultas, Ben (2024) Verification and Validation of the technical outreach activities for the Civil discipline. [USQ Project]

Blayney, Rhett (2024) Viability of Network Reconfiguration to Assist in Managing Transmission Voltage Level. [USQ Project]

Heine, Dean (2024) Wearable Seizure Detector with Smart Phone App for both In/Outpatients (Hardware System). [USQ Project]

Battersby, Caitlin (2024) Innovation in Design and Manufacturing Systems of Modular Residential Housing Solutions: A case study into the Fijian Construction Industry. [USQ Project]

Hall, Maxwell (2024) Analysis of the use of Drones for Structural Inspections to Assist Remote Construction – Focusing on Low/Mid Budget Drones. [USQ Project]

Keirsnowski, Tobias A. (2024) Calf Kindy - (Development of a Trainer for calves in AgTech: a simulation-based approach for future methane and data monitoring). [USQ Project]

Hair, Shane (2024) Enhanced Spectral Image Filtering for Re-entry Spacecraft: Hayabusa Mission. [USQ Project]

Fenton, Anthony (2024) Investigating Battery Energy Storage System Asset Life in Hybrid Synchronous Condensers. [USQ Project]

Grant, Brad D. B. (2024) Optimising Power Usage for Homes with Solar Panel Systems. [USQ Project]

Rae, Lachlan (2024) 3-Dimensional Detached Eddy Simulations of a Novel Variable Geometry Radial Ejector. [USQ Project]

Smeal, Luke Mclean (2024) A Safe Systems Assessment on a Multimodal Carriageway: Northbourne Avenue, Canberra. [USQ Project]

Reukers, Rachel (2024) Air Properties Measurements Using Tunable Diode Laser Absorption Spectrometer. [USQ Project]

Turner, Jarrod (2024) An Assessment of Post and Rail Safety Barriers Effectiveness. [USQ Project]

Preddy, Christopher (2024) An Investigation into the Impact Different Quantities of Vias have on the Reliability of PCB Circuits. [USQ Project]

Lindsey, Davis (2024) An investigation into urban stormwater design procedures and the degree to which they cater for increasing precipitation patterns. [USQ Project]

MacDonald, Lachlan (2024) Analysing an Availability-Centric Asset Maintenance Strategy for a Non-Operating LNG Production Train: A Case Study of Brunei LNG, South-east Asia. [USQ Project]

McNabb, Kayleigh (2024) Analysing Rammed Earth Walls as an Equivalent Construction Type for Residential Footing Design. [USQ Project]

Siale, Viliami Peila (2024) Analysis of 2022 worst road fatalities in a decade in Tasmania. [USQ Project]

O'Neill, James (2024) Analysis of Glaucoma Drainage Devices through Solid Modelling and CFD Flow Behaviour. [USQ Project]

Rodgers, Adrian (2024) Appropriateness of on-site detention (OSD) within urban brownfield catchments and what effect the implementation of on-site detention tanks (OSD) has on overall sub-catchment performance. [USQ Project]

Manns, Nicholas (2024) Assessing Radio Frequency Attenuation through Cotton Crop Canopies in Satellite-Based Agricultural Communication Networks. [USQ Project]

Schoeman, Eugene (2024) Assessment and Optimisation of Temporary Earthing Systems for Adequate Protection in Transient Industrial Mining Environments. [USQ Project]

O'Brien, Daniel Steven (2024) Automated Cattle Counting: Leveraging YOLOv8 for Accurate Object Detection in Feedlot Environments. [USQ Project]

Mabee, Sarah (2024) Can Machine Vision Assess the Eating Quality of a Growing Leafy Plant? [USQ Project]

Rummenie, Stacey Keith (2024) Control of Insect Pests Using Agricultural Robots - Development of an Insect Pest Eliminating End-Effector. [USQ Project]

Macapagal, JV Dela Cruz (2024) Creativity improvement in engineering design of undergraduate students through 3-D part design modelling. [USQ Project]

Twomey, Clay (2024) Design of a Porous Femoral Stem to Reduce Stress Shielding in Total Hip Arthroplasty. [USQ Project]

Shields, Nicholas (2024) Designing Interactive Engagement Activities for Multi-Year Mechanical Engineering Programs: A Mixed Methods Evaluation. [USQ Project]

Rajan, Mahesh (2024) Electric Power Load Analysis of a Naval Ship's Surveillance Radar System Using Stochastic Method. [USQ Project]

Kromhout, Gavin (2024) Engineering Information Product Delivery with Critical Success Factors for Maximum Value: An Integrative Literature Review. [USQ Project]

Lawrence, Bradley Lister (2024) Evaluation of a C-Lock Super SmartFeed trailer for controlled feed supplement delivery in grassfed dairy applications. [USQ Project]

Lyon, Tristan Dean (2024) Evaluation of a low-cost machine vision detection method for Varroa Destructor mites on honeybees. [USQ Project]

Laing, Rebecca (2024) Exploring Current Industry Best Practices for Next Generation Bridge Asset Management. [USQ Project]

Looker, Christopher (2024) Exploring Metamaterial Devices for Mechanical Sensing. [USQ Project]

Stubbings, Ryan (2024) Feasibility Analysis of Wave Energy Converters for the Production and Deep-Sea Storage of Hydrogen in Australia. [USQ Project]

Marshall, Aaron (2024) Feasibility of Blast Walls Constructed with Normal Strength Fibre-Reinforced Concrete. [USQ Project]

Petzler, Caitlin (2024) Investigating Electrical Energy Consumption in Peltier Based Thermo-Electric Atmospheric Water Generators. [USQ Project]

Paul, Jobin (2024) Investigating the Development and Management of Infrastructure and Facilities for Resilience. [USQ Project]

Turipa, Quinn Philip (2024) Investigation of High Temperature Liquid Bridge Plugs for Well Integrity. [USQ Project]

Richards, Ryan (2024) Investigation Of The Critical Zone Of CFRPType-V Pressure Vessels For H2 Storage In The Transportation Sector. [USQ Project]

Targett, Matthew (2024) Lifecycle Emissions of Different Pavement Types. [USQ Project]

Raine, Timothy (2024) Low Volume Road Development and Maintenance. [USQ Project]

Splawinski, Roman (2024) Multipurpose all-terrain wheel chair concept. [USQ Project]

Lennox, Hayden (2024) Object Avoidance System Using Millimeter-Wave Technology and Machine Vision in Crop-Dusting Aircraft. [USQ Project]

Seton, Sarah J. (2024) Optimising Multimolecular Film Performance on Water Surfaces. [USQ Project]

Robson, Thomas (2024) Performance-based Fire Sprinkler Design for Storage Risks in Non-storage Occupancies. [USQ Project]

Rodrigo, Sethum Manthika (2024) Physical and mechanical properties of concrete mix containing hybrid waste plastic and glass aggregate. [USQ Project]

Prasad, Shaneel (2024) Platform Mounted Water Cannon. [USQ Project]

Don, Lien Benedetta Amarasinghe Liyanage (2024) Project Management in 3D Printed Concrete Structures/Buildings. [USQ Project]

Magee, Scott (2024) Techno-Economic Analysis and Optimisation of Hydrogen Production from Photovoltaics and Electrolysis with Battery Storage: A HOMER Pro Approach. [USQ Project]

Underwood, Charles (2024) Wireless Power Transfer System for Electric Vehicle Charging. [USQ Project]

2023

Sunnerdale, Cameron (2023) A mixed methods study exploring the relationship between approaches to BIM training and factors affecting BIM transformation. [USQ Project]

Davis, Zack (2023) Leveraging digital twin technologies for sustainable development: an exploration of opportunities and challenges. [USQ Project]

Powell, Benjamin J. (2023) Project Management and Systems Engineering Integration for Increased Efficiency and Effectiveness. [USQ Project]

Anderson, Stein (2023) 3D Simulation of Submerged Plates. [USQ Project]

Mpai, Grace (2023) A comparison of the approaches between ACI 318-2014, Eurocode 2 and AS 3600-2018 in the analysis of punching shear. [USQ Project]

Humber, Isaac (2023) A Deep Learning Solution for the Detection of Health and Productivity Metrics in Sandalwood Forest Plantations Using Drone Imaging. [USQ Project]

Bourke, Allan (2023) A review and analysis of neuromorphic computing technology to detect concrete structure defects using object detection. [USQ Project]

Martin, Samuel J. (2023) AI for intelligent photo comparison for flood damage assessment on roads. [USQ Project]

Rowe, Karly (2023) Analysing the Construction Industry Collapse in the Commercial and Residential Building Sector of Australia. [USQ Project]

Riggs, David (2023) Analysis of Australian building code relevant to the use of decommissioned shipping containers as housing. [USQ Project]

Puthalath, Shamith (2023) Analysis of rear spoiler on a car model Computational simulation approach. [USQ Project]

Picton, Jordan (2023) Analytical Modelling of Composite Sandwich Panels. [USQ Project]

Beecham, James (2023) Apparatus for measuring microplastic aerosols in the atmosphere. [USQ Project]

Dale, Shane (2023) Balanced, controllable, distributed BESS, to assist with counteracting renewable generation fluctuations. [USQ Project]

Doherty, Riley (2023) Behaviour & Design of Corrugations in Thin-Walled Silos. [USQ Project]

Trent, Matthew (2023) Behaviour and Design of Connections in Modular Steel Buildings. [USQ Project]

Hunt, Jamie E. (2023) Co-digestion of abattoir paunch and stick water under mesophilic and ambient temperatures: a case study. [USQ Project]

Hartley, Rikki J. (2023) Comparative analysis of the effectiveness of current and innovative rural road safety countermeasures implemented in Far North Queensland. [USQ Project]

Kashanov, Runis (2023) Comparison of Austroads Guidelines for Lime Stabilisation of Highly Organic Black Soil. [USQ Project]

Fischer, Luke A. (2023) Construction Environmental Management in a Council Context. [USQ Project]

Gillies, Andrew (2023) Defects Management in Commercial Construction. [USQ Project]

Fulcher, Shane (2023) Design & Develop a Low Cost Programmable Logic Controller (PLC) Training Tool, utilising open-source micro-controllers. [USQ Project]

Naumann, Joshua (2023) Design and Analysis of a Wearable Arduino IOT Health Monitoring Device for Mining Workers. [USQ Project]

Day, Lachlan (2023) Design and Development of a Data Model for Fertilizer Spreading Based on 3-Point Hitch Implementation. [USQ Project]

Baker, Samuel (2023) Design and Development of an Electric Motor Inverter/Controller for a Formula SAE Electric Race Car. [USQ Project]

Walch, Sean P. (2023) Design and Development of an Innovative End Tipper for the Australian Grain Market. [USQ Project]

O’Connor, Liam (2023) Design of emergency housing from construction and demolition (C&D) waste materials. [USQ Project]

Wecker, Michael (2023) Designing an Inexpensive IEC61850 Test Unit and Protection Relay. [USQ Project]

Honan, Richard (2023) Determine the optimum cementitious blends to be used on pavement rehabilitation treatment. [USQ Project]

O’Reilly, Dane (2023) Development of Non-Fired geopolymer bricks. [USQ Project]

Hiscock, Luke (2023) Development Of Tools and Methods To Calculate Cradle Pad Reaction Forces In Complex Load Cases. [USQ Project]

Neumann, Blake (2023) Ductility and Cracking Behaviours of Engineered Cementitious Composites. [USQ Project]

Ahmad, Murtaza Aziz (2023) Effect of the different Expanded Polystyrene (EPS) densities on the mechanical properties of the EPS. [USQ Project]

Krumins, Talis (2023) Evaluation of Recycled Short Glass Fibre HDPE for Residential Structural Walls. [USQ Project]

Freeman, Isabella A. (2023) Examining the influence COVID-19 had on Australian road fatalities and serious injuries during 2020. [USQ Project]

Pippo, Victoria (2023) Exploration Into The Most Common Workplace Incidents In Commercial Construction - A Thematic Analysis And Discussion On Mitigation Strategies. [USQ Project]

Knight, Jack (2023) Feasibility of a Partial Replacement of Cement with Millmerran Pond Ash. [USQ Project]

Bezuidenhout, Rykent J. (2023) Feasibility of Fin Stabilized Projectiles for Long Range Target Shooting. [USQ Project]

Craige, Jason (2023) Feasibility Study of Off-Grid Electrical Infrastructure Required to Support a Carbon Farm. [USQ Project]

Thorogood, Alistair (2023) Formula SAE – Simulation & Autonomous Control. [USQ Project]

Chapman, Ella (2023) Greenhouse gas reduction and biogas production potential through anaerobic digestion of biomass waste: an Australian perspective. [USQ Project]

Moller, James (2023) Harvested Ash as Pozzolanic substitute in concrete. [USQ Project]

Dauth, Billy (2023) Home Based Solar Power Generation, Storage, and Localised Energy Grids. [USQ Project]

Shoko, Stevie (2023) Home Based Solar Power generation, storage, and localised energy grids. [USQ Project]

Cooper, Ainsley (2023) Home based solar power grid system monitoring, service, storm damage protection and recycling. [USQ Project]

Shailer, Rion M. (2023) Hydrogen's Future in Australia - A comprehensive desktop study on Hydrogen Storage and Transportation Solutions within Australia. [USQ Project]

Pretorius, Megan (2023) Impact Behaviour of Concrete Seawalls Reinforced with Different GFRP Bar Diameters. [USQ Project]

Wiegand, Jeremy (2023) Impacts of climate change on peak design discharge of unmitigated urban catchments – a comparative analysis. [USQ Project]

Mietzel, Aaron (2023) Implementation of Automated LVDT Calibration for Fatigue and Fracture Laboratory. [USQ Project]

Lauriston, Clinton (2023) Industrial Operational Technology Error Detection, Reporting, and the Subsequent Network Performance Impacts. [USQ Project]

Rodrigo, Witharana C. N. (2023) Investigating energy efficient practices by using digital construction for green buildings. [USQ Project]

Stahl, Philip (2023) Investigation of Culvert Failures During Extreme Flood Events. [USQ Project]

Mansell, Gregory (2023) Locating Low Voltage Underground Power Cable Faults Using Infrared Technology. [USQ Project]

Hampshire, Angus (2023) Low cost computing solution for dynamic educational activities. [USQ Project]

Hutchings, Ian (2023) Low Powered Remote Monitoring for Smart Beehives. [USQ Project]

Rios Garcia, Cristhian C. (2023) Low Volume Road Development and Management: A review of current best practices adopted by local governments with a focus on rural areas of Australia. [USQ Project]

Saul, Jared (2023) Measurement of Electromagnetic Fields in DC Traction Substations. [USQ Project]

Parke, Mitchell (2023) Mechanical Performance of Engineered Cementitious Composites (ECC) with Substitution of Fly Ash by Pond Ash. [USQ Project]

Jawney, Andrew (2023) MM-Wave Assisted Automatic Camera Tracking System. [USQ Project]

Boden, Matthew (2023) Noncontact Distance and Vibration Measurement. [USQ Project]

Ngo, Uy Truong (2023) Numerical simulation on the Aerodynamic performance of a semi-trailer tanker under crosswinds. [USQ Project]

Holmes, Matthew (2023) Operating Toowoomba’s Water Treatment Plant in Contact Filtration Following Dam Inflow Events and Raw Water Deterioration. [USQ Project]

Bargwanna, Matthew (2023) Operational Implementation of Broken Conductor Detection Method to Mitigate Wires Down Events. [USQ Project]

Hjort, Jesse (2023) Performance of Concrete Made with Recycled Crushed Glass. [USQ Project]

Perren, Steven (2023) Properties of cement mortar mix containing combined waste plastics and glass. [USQ Project]

Perrett, Dylan E. (2023) Reactive Power Contributions of Grid-Connected Solar. [USQ Project]

Proctor, Fern (2023) Real Time Drowning Detection System Using Machine Vision and Learning. [USQ Project]

Marshall, Patrick (2023) Refinement, experimental evaluation, and theoretical modelling of Sigma-delta power converters. [USQ Project]

Mossman, Darcy (2023) Retrofitting and Redesign of Irrigation Systems. [USQ Project]

Brinkmann, Matthew (2023) Retrofitting Hub Motors to the Un-Driven Wheels of Fossil Fuelled Vehicles, With a Comparison of a Flywheel Energy Storage Systems (FESS) and a Traditional EV Battery. Honours thesis, University of Southern Queensland. (Unpublished)

Hammond, Bryce W. (2023) Retrospective Resilience of Jamberoo Mountain Road. [USQ Project]

Gurrin, Kendra (2023) Safety of electrical equipment in water-based amusement rides from an engineering perspective. [USQ Project]

Richardson, Chase M. (2023) Safety risks associated with HV electrical equipment at the point of imminent failure. [USQ Project]

Meerwald, Taylor (2023) Smart Condition Assessment of Tunnel Structures. [USQ Project]

Asirvatham, Jude (2023) Smart Home System Design and Optimization. [USQ Project]

Smith, Adam (2023) Spectral Proper Orthogonal Decomposition of High Speed Schlieren Images. [USQ Project]

Young, Adam (2023) St George Irrigation Area – Feasibility and Preliminary design for Stock and Domestic Pipeline. [USQ Project]

Lennon, Thea (2023) Stressors and Failures of Construction Companies. [USQ Project]

Murerwa, Mordecai (2023) Suitability Of Recycled Crushed Glass as a Replacement for Natural Sand in Concrete. [USQ Project]

Griffiths, Duane (2023) Synthesis and Emulation of a Musician’s Signal Chain and Sound. [USQ Project]

Bellert, Daniel (2023) Testing non-metallic ember proof screens for dwellings within bushfire attack regions. [USQ Project]

Moore, Michael (2023) The Design of a System for the Removal of Underground Air Conditioning Units. [USQ Project]

Taylor, Rory (2023) The Effects of Three Phase Asymmetry on Transmission Line Travelling Waves. [USQ Project]

Obst, Drew (2023) Use of Harvested Ash as Replacement for Fine Aggregate in Concrete. [USQ Project]

Taylor, Maddy (2023) Use of Waste Glass as a Sand Replacement in Road Base Applications. [USQ Project]

Lindley, Sarah (2023) Validity of 20-Minute Neighbourhoods in Regional Australia. [USQ Project]

Fitzsimmons, Bernard (2023) Value risk matrix for water source selection for Dalby QLD. [USQ Project]

Balanzategui, Benjamin (2023) WiFi Based Passive Vermin Sensing, Proof of Concept and Feasibility Analysis. [USQ Project]

Kelly, Simeon (2023) Wireless Mountain Bike Safety System. [USQ Project]

Long, Chism (2023) Development of a low-cost IoT Thermal Work Limit sensor used in construction tunnels. [USQ Project]

Hilmer, Kane (2023) Glass Surface Contamination Sensor System: Design and Verification. [USQ Project]

Adhikari, Bipin (2023) Evaluation Of Sustainable Engineering Infrastructures. [USQ Project]

Kennedy, Charindeguta (2023) Master's Research Project Part 1, Report 2. Coursework Masters thesis, University of Southern Queensland. (Unpublished)

2022

Schuster, Robert (2022) Airborne Observation Controller. [USQ Project]

Wyper, Rye (2022) Benefits and Challenges of Applying Travelling Wave Technology to Sub-transmission Networks. [USQ Project]

Drummond, Gordon Alexander (2022) Design and Manufacture of Scaled FSAE Chassis Using Generative Design and Topology Techniques. [USQ Project]

Downing, Elizabeth (2022) Shear Strength Properties of Clean and Clay Infilled Rock Joints: An analysis of the impact of moisture content under CNL conditions. [USQ Project]

Coonan, Tom (2022) A New Supplementary Binder in Foamed Bitumen Stabilisation. [USQ Project]

Jennings, Clinton (2022) An integrated “Mine to Mill” automation methodology applied to Sanbrado. [USQ Project]

Alves, Billy Michael (2022) Analysis of Inflow and Infiltration in a Low-Pressure Sewer System. [USQ Project]

Ford, Albie (2022) Analysis of Traffic Speed Deflectometer (TSD) data on State Highways in Southland, New Zealand. [USQ Project]

Hill, Hamish (2022) Australian Carbon Credit Unit Calculator for Concrete Recycling Facility Use. [USQ Project]

Rayner, Andrew (2022) Behaviour of GFRP Reinforced Concrete Slab on Ground. [USQ Project]

Keenan, Mike (2022) Bridge load assessment using machine learning and weigh-in-motion data. [USQ Project]

Armanasco, Matthew (2022) Cardiac Biometric Authentication Using Channel State Information. [USQ Project]

Cooper, Brodie (2022) CFD Analysis of a Primary Nozzle Vortex Generator on Steam Ejector Performance. [USQ Project]

Henderson, Adam (2022) Combination Harvest and Bale Machinery’s Impact on Cotton Productivity in High Clay Cotton Fields of Northern NSW. [USQ Project]

Hollingshead, Fraser (2022) Compaction density of partially saturated soils. [USQ Project]

French, Corey R. M. (2022) Comparative study of modular construction methodologies within residential and commercial applications. [USQ Project]

Gough, Tom (2022) Compressive Behaviour of Short Engineered Cementitious Composite Columns Containing Recycled Polyethylene Terephthalate Aggregate. [USQ Project]

Fritz, Patrick (2022) Design Analysis of Guy Wires of Communication Towers: Industry Based Project Proposed by Raytheon Australia. [USQ Project]

Shrestha, Ashesh (2022) Design of low-density high performing lattices. [USQ Project]

Ahlers, Corey (2022) Development Of an Adaptive Control Mechanism to Enable Automated Irrigation on Gantry Robots. [USQ Project]

Tomac, Beau (2022) Development of an Improved Concrete Defect Object Detection Method for Edge AI Inference Technology. [USQ Project]

Sharpe, Kyal (2022) Development of Smart Sewer Pipeline Fault Detection Method using CCTV Inspection Data and Deep Learning. [USQ Project]

Middenway, Jayden (2022) Digital fabrication with collaborative robotics. [USQ Project]

McLaughlin, Ayrton (2022) Effective techniques for reducing the effects of skilled labour shortages in the Australian construction sector. [USQ Project]

O'Donoghue, Grant (2022) Evaluation of engineering solutions to protect Cairns from coastal inundation due to storm surge and sea level rise. [USQ Project]

Schneekloth, Jenelle (2022) Evaluation of geocomposite reinforced pavement for suitability in Queensland roads. [USQ Project]

Perkins, Shaun (2022) Evaluation of Issues Affecting Stabilised Granular Pavements. [USQ Project]

Sheehan, Michael (2022) Fabrication and design of a Stirling Engine powered by hydrogen. [USQ Project]

O'Keeffe, Myles E. (2022) Feasibility of using Thermoelectric Generators to Improve Fuel Efficiency in Existing In-service Vehicles. [USQ Project]

Wells, Keith (2022) Geometry Refinement of Venturi Flow Meters to Reduce Energy Losses in Water and Air Applications. [USQ Project]

Rath, Jaymes (2022) Identifying and implementing best practice models for management of unsealed road networks in NSW Local Government to achieve sustainability. [USQ Project]

Sale, Maggie (2022) Lessons Learnt from Bridge Reconstructions Post Successive Disaster Events in the Eurobodalla LGA. [USQ Project]

Francis, B. (2022) Lunar Resources: Geosensing for Autonomous Exploration. [USQ Project]

Bischof, Lachlan (2022) Off-Highway Platooning Sensor Selection and Survivability. [USQ Project]

Wium, Coenraad (2022) Optimal Model Designs for Community Batteries. [USQ Project]

Baker, Ted (2022) Optimisation of a Hydro-Pneumatic Accumulator using Computational Fluid Dynamics. [USQ Project]

Shrestha, Nabin (2022) Remote Controlled Motorised Laser Alignment Trolley. [USQ Project]

Ferriday, Daniel Goward (2022) Scour Risk Assessment of the O. O. Madsen Bridge During Flood. [USQ Project]

Donnelly, Adam John (2022) SICK vs Intrinsic. [USQ Project]

O'Connor, Danny (2022) Soil compaction dependence on sub-field spatial soil constraint variability. [USQ Project]

Faivre, Yohanne (2022) SPT - CPT Correlation in South East Queensland, Australia. [USQ Project]

Irving, Jonathan (2022) The analysis of torque required for sealing of threaded brass flare fittings. [USQ Project]

Di Mauro, Matthew N. (2022) The Comparative Analysis of the Design of Shredder Hammer Tips and Bars in Sugar Milling Applications. [USQ Project]

Bourke, Christopher (2022) UAS autonomous drop zone assessment and adaptive delivery. [USQ Project]

Ansell, Cameron (2022) Understanding ballasting agent dynamics when recycled in a ballasted flocculation process and impact on performance. [USQ Project]

Hall, Nick (2022) Unsealed Road Grading Techniques. [USQ Project]

McManus, Brendan (2022) Use of Expanded Polystyrene (EPS) Integrated with Steel Fibres as Coarse Aggregate Replacement in Concrete. [USQ Project]

Chambers, Brad (2022) Vibration Analysis of an Excavator to Investigate the Effects on the Operator. [USQ Project]

Elliot, Jake Cameron (2022) PCB standards. [USQ Project]

Allen, Gregory (2022) Design of a Small-Scale Pyrolysis Machine. [USQ Project]