Items for Faculty/School / Institute/Centre :
Current – Faculty of Health, Engineering and Sciences - School of Engineering (1 Jan 2022 -)

A

Alves, Billy Michael (2022) Analysis of Inflow and Infiltration in a Low-Pressure Sewer System. [USQ Project]

Armanasco, Matthew (2022) Cardiac Biometric Authentication Using Channel State Information. [USQ Project]

Ahlers, Corey (2022) Development Of an Adaptive Control Mechanism to Enable Automated Irrigation on Gantry Robots. [USQ Project]

Ansell, Cameron (2022) Understanding ballasting agent dynamics when recycled in a ballasted flocculation process and impact on performance. [USQ Project]

Allen, Gregory (2022) Design of a Small-Scale Pyrolysis Machine. [USQ Project]

B

Bischof, Lachlan (2022) Off-Highway Platooning Sensor Selection and Survivability. [USQ Project]

Baker, Ted (2022) Optimisation of a Hydro-Pneumatic Accumulator using Computational Fluid Dynamics. [USQ Project]

Bourke, Christopher (2022) UAS autonomous drop zone assessment and adaptive delivery. [USQ Project]

C

Coonan, Tom (2022) A New Supplementary Binder in Foamed Bitumen Stabilisation. [USQ Project]

Cooper, Brodie (2022) CFD Analysis of a Primary Nozzle Vortex Generator on Steam Ejector Performance. [USQ Project]

Chambers, Brad (2022) Vibration Analysis of an Excavator to Investigate the Effects on the Operator. [USQ Project]

D

Drummond, Gordon Alexander (2022) Design and Manufacture of Scaled FSAE Chassis Using Generative Design and Topology Techniques. [USQ Project]

Downing, Elizabeth (2022) Shear Strength Properties of Clean and Clay Infilled Rock Joints: An analysis of the impact of moisture content under CNL conditions. [USQ Project]

Donnelly, Adam John (2022) SICK vs Intrinsic. [USQ Project]

Di Mauro, Matthew N. (2022) The Comparative Analysis of the Design of Shredder Hammer Tips and Bars in Sugar Milling Applications. [USQ Project]

E

Elliot, Jake Cameron (2022) PCB standards. [USQ Project]

F

Ford, Albie (2022) Analysis of Traffic Speed Deflectometer (TSD) data on State Highways in Southland, New Zealand. [USQ Project]

French, Corey R. M. (2022) Comparative study of modular construction methodologies within residential and commercial applications. [USQ Project]

Fritz, Patrick (2022) Design Analysis of Guy Wires of Communication Towers: Industry Based Project Proposed by Raytheon Australia. [USQ Project]

Francis, B. (2022) Lunar Resources: Geosensing for Autonomous Exploration. [USQ Project]

Ferriday, Daniel Goward (2022) Scour Risk Assessment of the O. O. Madsen Bridge During Flood. [USQ Project]

Faivre, Yohanne (2022) SPT - CPT Correlation in South East Queensland, Australia. [USQ Project]

G

Gough, Tom (2022) Compressive Behaviour of Short Engineered Cementitious Composite Columns Containing Recycled Polyethylene Terephthalate Aggregate. [USQ Project]

H

Hill, Hamish (2022) Australian Carbon Credit Unit Calculator for Concrete Recycling Facility Use. [USQ Project]

Henderson, Adam (2022) Combination Harvest and Bale Machinery’s Impact on Cotton Productivity in High Clay Cotton Fields of Northern NSW. [USQ Project]

Hollingshead, Fraser (2022) Compaction density of partially saturated soils. [USQ Project]

Hall, Nick (2022) Unsealed Road Grading Techniques. [USQ Project]

I

Irving, Jonathan (2022) The analysis of torque required for sealing of threaded brass flare fittings. [USQ Project]

J

Jennings, Clinton (2022) An integrated “Mine to Mill” automation methodology applied to Sanbrado. [USQ Project]

K

Keenan, Mike (2022) Bridge load assessment using machine learning and weigh-in-motion data. [USQ Project]

M

Middenway, Jayden (2022) Digital fabrication with collaborative robotics. [USQ Project]

McLaughlin, Ayrton (2022) Effective techniques for reducing the effects of skilled labour shortages in the Australian construction sector. [USQ Project]

McManus, Brendan (2022) Use of Expanded Polystyrene (EPS) Integrated with Steel Fibres as Coarse Aggregate Replacement in Concrete. [USQ Project]

O

O'Donoghue, Grant (2022) Evaluation of engineering solutions to protect Cairns from coastal inundation due to storm surge and sea level rise. [USQ Project]

O'Keeffe, Myles E. (2022) Feasibility of using Thermoelectric Generators to Improve Fuel Efficiency in Existing In-service Vehicles. [USQ Project]

O'Connor, Danny (2022) Soil compaction dependence on sub-field spatial soil constraint variability. [USQ Project]

P

Perkins, Shaun (2022) Evaluation of Issues Affecting Stabilised Granular Pavements. [USQ Project]

R

Rayner, Andrew (2022) Behaviour of GFRP Reinforced Concrete Slab on Ground. [USQ Project]

Rath, Jaymes (2022) Identifying and implementing best practice models for management of unsealed road networks in NSW Local Government to achieve sustainability. [USQ Project]

S

Schuster, Robert (2022) Airborne Observation Controller. [USQ Project]

Shrestha, Ashesh (2022) Design of low-density high performing lattices. [USQ Project]

Sharpe, Kyal (2022) Development of Smart Sewer Pipeline Fault Detection Method using CCTV Inspection Data and Deep Learning. [USQ Project]

Schneekloth, Jenelle (2022) Evaluation of geocomposite reinforced pavement for suitability in Queensland roads. [USQ Project]

Sheehan, Michael (2022) Fabrication and design of a Stirling Engine powered by hydrogen. [USQ Project]

Sale, Maggie (2022) Lessons Learnt from Bridge Reconstructions Post Successive Disaster Events in the Eurobodalla LGA. [USQ Project]

Shrestha, Nabin (2022) Remote Controlled Motorised Laser Alignment Trolley. [USQ Project]

T

Tomac, Beau (2022) Development of an Improved Concrete Defect Object Detection Method for Edge AI Inference Technology. [USQ Project]

W

Wyper, Rye (2022) Benefits and Challenges of Applying Travelling Wave Technology to Sub-transmission Networks. [USQ Project]

Wells, Keith (2022) Geometry Refinement of Venturi Flow Meters to Reduce Energy Losses in Water and Air Applications. [USQ Project]

Wium, Coenraad (2022) Optimal Model Designs for Community Batteries. [USQ Project]