Browse by Fields of Research (ANZSRC 2008)

King, Job (2016) Behaviour of concrete with oil contamination and reinforced with fibres. [USQ Project]

Baker, Trent (2016) Analysis on the behaviour of FRP reinforced concrete railway sleepers. [USQ Project]

Wiya, Robert (2016) Behavior of concrete when using RAP (Reclaimed Asphalt Pavement) as a coarse aggregate material. [USQ Project]

Lister, James (2016) Design of high modulus asphalt overlay for concrete pavements. [USQ Project]

Jackson, Scott (2016) Development of a sustainable footpath material using recycled road profile, natural soils and PolyCom stabilising aid. [USQ Project]

Heath, Brendon (2016) Investigation into the flexural characteristics of cold formed steel filled with rubberised concrete. [USQ Project]

Cherry, Rebecca (2016) Investigation of road wearing surface systems for glue laminated softwood timber bridge decks. [USQ Project]

Beaumont, Matthew (2016) Pacific highway glenugie: case study of the use of heavy duty granular pavement in northern NSW. [USQ Project]

Mepham, Matthew (2016) Recent trends of stabilisation methods: a case study for rural roads by councils in the New England region of NSW. [USQ Project]

Kohler, Jarred (2016) Soil stabilisation in road pavements. [USQ Project]

Shrestha, Suman (2016) Study of effects of coarse grain contents on Atterberg limits and expansiveness of the clay. [USQ Project]

Brennan, Matthew Aaron (2016) Use of recycled concrete and lime to improve marginal subgrades in the Toowoomba Regional Council. [USQ Project]

Hawkins, Jared (2016) Using engineering cementitious composites as an adhesive for near-surface mounted FRP bars strengthening concrete/masonry structures. [USQ Project]

Smith, Cameron (2016) Utilisation of rice husk ash and fly ash as a partial replacement for cement in self-consolidating concrete. [USQ Project]

Alenezi, Fahad T. A. S. M. (2016) Workability and compressive strength of eco-friendly concrete based on waste ceramic particles. [USQ Project]

Wilson, Aaron P (2015) Establishing a mix design procedure for Geopolymer concrete. [USQ Project]

Tobler, Jake P (2015) Evaluation of EverFE software for designing Australian concrete pavements. [USQ Project]

Wright, Christopher John Brockway (2014) Evaluation of issues for small and medium-sized enterprises in the use of advanced and green engineering materials. [USQ Project]

Sweeney, Juliana (2014) Topological optimisation of large reinforced concrete box culverts under SM1600 loads. [USQ Project]

Knight, Tracey Anne (2014) Alkali-silica reaction in concrete bridge piles: strengthening with fibre-reinforced polymers. [USQ Project]

Knight, Tracey Anne (2014) Alkali-silica reaction in concrete bridge piles: treatment and strengthening with fibre-reinforced polymers. [USQ Project]

Dudman, Benjamin (2014) Aquaplaning assessment and mitigation in flat terrains. [USQ Project]

Nicol, Lachlan Keith (2014) Behaviour of fibre composite walkways and grating. [USQ Project]

Brits, Chane (2014) Developing a numerical model for the design of sheet pile walls. [USQ Project]

Hesse, Gareth Grant (2014) Development of ductile and ultra-high performance engineered cementitious composite (ECC) with lightweight microsphere additive. [USQ Project]

Rosas, Angela Beatriz Rodriques (2014) Experimental investigation on the alkali silica reaction effect on concrete strength degradation. [USQ Project]

Hatch, Daniel Roy (2014) Modal testing of existing supermarket floor systems and predictive finite element modelling for better design. [USQ Project]

Neumann, Philip (2013) Evaluation of the strength characteristics of recycled bituminous pavement materials. [USQ Project]

Madanavosa, Savenaca (2013) The effect of efflorescence on the mechanical properties of geopolymers. [USQ Project]

Spurling, Harrison (2013) Water sensitive urban design for sustainable road development. [USQ Project]

Hemming, Steven (2012) Sandwich panels for slab applications. [USQ Project]

Klinge, Craig Desmond (2012) Behaviour of gang-nail plated timber joints in tension perpendicular to the grain. [USQ Project]

O'Leary, Haydn (2012) Dynamic characterisation of cellular cores and sandwich beams. [USQ Project]

Reed, Mark Edward (2012) Effects of fibres and curing temperature on geopolymer concrete. [USQ Project]

O'Keeffe, Andrew (2011) Behaviour of polymer concrete for infilling fibre composite tubes. [USQ Project]

Tomkins, Brock William (2011) Chemical resistance of geopolymer concrete against H2SO4 & NaOH. [USQ Project]

Brown, Steven (2011) Design of a high-shear geopolymer concrete mixer. [USQ Project]

Mautoga, Marau (2011) Fracture toughness of glass powder reinforced vinyl ester resin post cured in a conventional oven using flexural test. [USQ Project]

Davydov, Alexey (2011) Investigation of the structural failure of plywood noise barriers. [USQ Project]

Prasad, Nitesh Nitin (2011) Verification of simplified optimum designs for reinforced concrete beams. [USQ Project]

Malvern, Jerome Liam (2010) Investigation of high impact capacity composite material for civil infrastructure. [USQ Project]

Bajracharya, Rohan Muni (2010) Structural evaluation of concrete-expanded polystyrene sandwich panels for slab applications. [USQ Project]

Turner, Alan (2010) Structural performance of cross laminated timber panels as walls. [USQ Project]

Harch, Brian Joseph Luke (2010) The investigation into the optimisation of cross laminated timber panels for use in the Australia building industry. [USQ Project]

Plain, Matthew (2009) Behaviour of innovative fibre composite sandwich panels for structural applications. [USQ Project]

Pickford, Christopher Ian (2009) Behaviour of laminated fibre composite sandwich girders. [USQ Project]

Mayen, David Ayuen (2009) Composites from natural renewable resources in civil engineering: Epoxidized vegetable oil with epoxy resin, fly ash and sawdust fillers(mechanical, physical and structural properties). [USQ Project]

Taylor, Alan Owen (2009) Investigation on the fatigue behaviour of pultruded fibre composites. [USQ Project]

Schuh, Stephen Andrew (2007) Estimating rippability of Brisbane Tuff using quantitative and qualitative characteristics and a modified approach to an existing rippability rating method. [USQ Project]

Chan, Wooi Lieh (2006) Fracture analysis of vinyl ester composites cured under microwave conditions. [USQ Project]

Fraser, Timothy (2004) The use of industry by-products in the treatment of acid sulfate soils. [USQ Project]