Browse by Fields of Research (ANZSRC 2008)

Chibvura, Charles (2019) A finite element investigation of Fluid Structure Interaction effects on dam safety performance of the proposed Batoka Dam during Seismic Excitation. Coursework Masters thesis, University of Southern Queensland. (Unpublished)

Sutcliffe, Wayne (2016) Design of a truss bridge for low cost using structural topology optimisation. [USQ Project]

Wilson, Matthew (2016) Deterioration of timber bridges using a Fault Tree Analysis. [USQ Project]

Nankervis, Gary A. (2016) Development of a computer simulation for scouring around bridge piers. [USQ Project]

Peng, Zhuohao (2016) Geodesic dome structural analysis and design. [USQ Project]

Fraser, Andrew (2016) Study of blast effects on structures. [USQ Project]

Woolley, Reece (2016) The performance evaluation of bridge culverts reinforced with GFRP bars. [USQ Project]

Eaton, John (2015) Investigations into the effect of contaminants on permeable concrete effectiveness during its life cycle. [USQ Project]

Jordan, Bradley (2015) Analysis of bridges subjected to flood loadings based on different design standards. [USQ Project]

Walker, Scott (2015) Analysis of the behaviour of composite transom decks for railway bridges. [USQ Project]

Fraser, Carl (2015) Vulnerability of bridges in extreme flood events based on element failure. [USQ Project]

Knipe, Russell Alexander (2014) 3D fluid modelling of the O.O. Madsen Bridge during flood. [USQ Project]

Knight, Tracey Anne (2014) Alkali-silica reaction in concrete bridge piles: treatment and strengthening with fibre-reinforced polymers. [USQ Project]

Hancock, Nashua Thomas (2014) Natural disaster risk management in South Asia a dissertation. [USQ Project]

Brailsford, Steven (2013) Cathodic protection of reinforced concrete bridges in the marine environment as an asset management tool. [USQ Project]

Serra, Michael Peter (2013) Geotechnical stability analysis using student versions of FLAC, PLAXIS and SLOPE/W. [USQ Project]

Sams, Mathew Steven (2013) Numerical and physical modelling of a 2D tunnel heading at collapse. [USQ Project]

Hemming, Steven (2012) Sandwich panels for slab applications. [USQ Project]

Klinge, Craig Desmond (2012) Behaviour of gang-nail plated timber joints in tension perpendicular to the grain. [USQ Project]

O'Leary, Haydn (2012) Dynamic characterisation of cellular cores and sandwich beams. [USQ Project]

Reed, Mark Edward (2012) Effects of fibres and curing temperature on geopolymer concrete. [USQ Project]

O'Keeffe, Andrew (2011) Behaviour of polymer concrete for infilling fibre composite tubes. [USQ Project]

Tomkins, Brock William (2011) Chemical resistance of geopolymer concrete against H2SO4 & NaOH. [USQ Project]

Brown, Steven (2011) Design of a high-shear geopolymer concrete mixer. [USQ Project]

Dakin, Anthony (2011) Investigation of the suitability of finger jointed structural timber for use in nail plated roof trusses. [USQ Project]

Veenstra, Nathaniel (2011) Optimum strut-and-tie model for a cantilever curved wall. [USQ Project]

Dudley, Samuel (2011) Stability of underground tunnelling using relaxation techniques. [USQ Project]

Prasad, Nitesh Nitin (2011) Verification of simplified optimum designs for reinforced concrete beams. [USQ Project]

Kennedy, Jotham Ariel (2010) Experimental investigation into the uplift capacity of ground anchors in sand. [USQ Project]

Lewers, Glyn Alan (2010) Design of a frame/structure for a large wastewater treatment pond. [USQ Project]

Daly, James (2010) Design, construction and performance of buildings foundations on soft clays in the Brisbane region. [USQ Project]

Gibson, David Eric (2010) Evaluating comparative performance of various shaped bridge piers: experimental investigation of sediment transport and scouring. [USQ Project]

Bajracharya, Rohan Muni (2010) Structural evaluation of concrete-expanded polystyrene sandwich panels for slab applications. [USQ Project]

Cole, Andrew James Shorten (2009) A comprehensive study of footing on c-φ soil slopes - numerical and physical modelling. [USQ Project]

Lyle, Nathan Ross (2009) Comprehensive design charts for the footing on slope problem. [USQ Project]

Saunders, Michael Joseph (2009) Investigation of the relationship between experimental bridge piers and erosion within a flow. [USQ Project]

Yu, Yu Wah (2009) Pile driving analysis via dynamic loading test. [USQ Project]

Arnold, Matthew David (2008) A two-dimensional analysis of the bearing capacity of footings near slopes. [USQ Project]

Gibson, Duane Nikalia (2008) Interaction of recycled concrete and geogrid reinforcement material 14m high reinforced earth wall. [USQ Project]

Kelman, Oliver (2008) Measuring and monitoring of grain silos using laser scanning and total stations. [USQ Project]

Waldock, David A. (2008) The maintenance of 'moment continuity' within structural concrete beam steps. [USQ Project]

Wong Wan Sie, Winxie (2007) Analysis and design of curtain wall systems for high rise buildings. [USQ Project]

Green, Christopher Ross (2007) Testing and analysis of fibre composite beams in a bridge structure. [USQ Project]

Heron, Katherine Margaret Monica (2007) Vortex shedding on bridge piers. [USQ Project]

Klein, Lindsay Edward (2006) Finite element analysis of a composite bridge deck. [USQ Project]

Walker, Craig Louis (2006) Local and post-local buckling of steel tubes in thin-walled circular concrete-filed steel tubular columns. [USQ Project]

Bolger, Paul (2006) Strengthening of headstocks with vertical clamping to enhance shear capacity. [USQ Project]

Breust, Tristan David (2006) The design and structural analysis of a steel portal framed shed for the Darling Downs Historical Rail Society. [USQ Project]

Chiu, Kwong Man Karen (2006) The use of recycled concrete aggregate in structural concrete around South East Queensland. [USQ Project]

Kronk, Matthew Neil (2006) Ultimate strength of steel-concrete composite beams under combined bending and torsion. [USQ Project]

Figg, Matthew Lorne (2006) Using renewable plantation timber as a replacement option for unrenewable hardwood girders in bridges. [USQ Project]

Lee, Chang Long (2005) A study and evaluation on Seri Wawasan bridge in Putrajaya, Malaysia. [USQ Project]

Kannapiran, Ram Kumar M. (2005) A study and evaluation on SMART Project, Malaysia. [USQ Project]

Leow, Jia Hui (2005) A study of building foundations in Malaysia. [USQ Project]

Gounder, Sangeevam (2005) Design of steel structures under fire. [USQ Project]

Whittaker, Todd (2005) Effect of existing cracks in shear strengthening of concrete girders with external post-tensioning. [USQ Project]

Chuah, Yew Pin (2005) Evolutionary structural optimization for multi component structural systems. [USQ Project]

Davis, Shawn Wayne (2005) Investigation of the flexural strengthening of concrete beams using external prestressing. [USQ Project]

Ngo, Nelson, Shing Chai (2004) High-strength structural concrete with recycled aggregates. [USQ Project]

Wong, Chuan Mein (2004) Use of short fibres in structural concrete to enhance mechanical properties. [USQ Project]

Lau, Chau Chin (2004) A study on concrete faced rockfill dams. [USQ Project]

Heng, Hern (2004) Design of structural glass fitting for seismic condition. [USQ Project]

Cheong, Fong Chin (2004) Effect of admixtures on the use of short fibres in structural concrete to enhance mechanical properties. [USQ Project]

Choo, Yeun Feong (2004) Seismic stability of slope. [USQ Project]

Jobling, Lindsay Peter (2004) Shear strengthening of headstocks using prestressed fibre strips. [USQ Project]

Krinke, Mark James (2004) The effect of admixtures in concrete containing manufactured sand. [USQ Project]