Items where Year is 2007

Ahmad, Abdul Hamid (2007) Life cycle assessment in semiconductor foundry. [USQ Project]

Andrews, Christopher John (2007) Developing and conducting a human resource management performance audit: case study of an Australian university. Doctorate (other than PhD) thesis, University of Southern Queensland. (Unpublished)

Bichel, Daniel (2007) Optimisation of biodiesel stationary engine performance by modelling and simulating the running conditions. [USQ Project]

Birkbeck, A. (2007) Development of a remote laboratory system for external university students. [USQ Project]

Bishop, Matthew Darrell (2007) Educational robot design. [USQ Project]

Boitshoko, Daniel (2007) Extracting spatial information from aerial video imagery for monitoring riparian areas. [USQ Project]

Bolitho, Gary (2007) TDR probes for the measurement of root zone soil moisture. [USQ Project]

Bollaart, Clement (2007) OPC cycle time analyser. [USQ Project]

Booshand, Peter John (2007) Literature review of advanced research and innovation in the mining industry. [USQ Project]

Breddin, Ian Stewart (2007) Property rights and the littoral zone in Queensland. [USQ Project]

Chamberlain, Michael (2007) Optimisation of Gold Coast City’s chlorine dosing system for the southern region distribution network. [USQ Project]

Chow, Kai Wen (2007) Implications for engineers aspiring to become top-senior managers. [USQ Project]

Clarke, Lauren Elizabeth (2007) Factors in the selection of contractors for engineering works. [USQ Project]

Coaker, Warren (2007) How engineers become CEOs - implications for education and training. [USQ Project]

Crowe, Daniel Leigh (2007) Management of physical assets at Purga Quarry. [USQ Project]

Davidson, Thomas Peter George (2007) Using tensile tests as benchmark, investigate the best percentage by weight of slg, as fillers, in Phenolic resins post-cured by microwaves. [USQ Project]

Dugdell, David Thomas (2007) Toowoomba road network review. [USQ Project]

Dunwoody, John Ernest (2007) Spatial analysis of woody vegetation land cover change in Crows Nest Shire, QLD. [USQ Project]

El Komy, Ahmed (2007) Millmerran Power Station ROM coal blockage removal system. [USQ Project]

Gallagher, Tony (2007) Clear zones in urban environments. [USQ Project]

Ghude, Sarang (2007) Design a PID controller with missing packets in a networked servo-system. Coursework Masters thesis, University of Southern Queensland. (Unpublished)

Green, Christopher Ross (2007) Testing and analysis of fibre composite beams in a bridge structure. [USQ Project]

Gustafson, Adrian Mark (2007) Investigation of a new generation degradable implant material. [USQ Project]

H'ng, Po Lyn (2007) Comparative study of engineering leadership of senior engineers in Malaysia & Australia within the construction industry. [USQ Project]

Hansen, Luke (2007) The use of waste cooking oil as an alternative fuel for the diesel engine. [USQ Project]

Harvey, Warren John (2007) Bridge approach guardrail prioritisation. [USQ Project]

Heron, Katherine Margaret Monica (2007) Vortex shedding on bridge piers. [USQ Project]

Hicks, Kevin Charles (2007) Design of aeration ploughing tool for poultry litter within shed to reduce odour generation. [USQ Project]

Holzheimer, Carson Keith (2007) Automation of the rollingstock twist test. [USQ Project]

Johnston, George Finlay (2007) Wildlife vehicle collision GIS mapping & modelling. [USQ Project]

Jones, Bruce Thomas (2007) Dragline maintenance engineering. [USQ Project]

Kang, Boon Geh (2007) Wall climbing robot. [USQ Project]

Kleynhans, Claudius Justus (2007) Design and review of Millmerran coal handling plant. [USQ Project]

Kwok, Keen Whale (2007) Understanding progressive collapse and its effect to structural design. [USQ Project]

Lee, Wai Hung (2007) Shrinkage reduction of thermoset matrix particulate reinforced composites during hardening using low power microwave. [USQ Project]

Lefhoko, Mmitsi (2007) Power station operations Millmerran power station feed water dissolved oxygen control. [USQ Project]

Liyanawaduge, Nawanandana Chandrasiri (2007) GPS usage and infrastructure needs for machine guidance and control in the construction projects associated with QDMR. [USQ Project]

Looi Zi Qing, Sean (2007) Improving the performance of an industrial cold room. [USQ Project]

MacMillan, Andrew Allan (2007) Respiration monitor and recording system. [USQ Project]

Mackenzie, Matthew Robert (2007) PID controller optimisation using genetic algorithms. [USQ Project]

Malpress, Ray (2007) A new internal combustion engine configuration - opposed piston with crank offset. [USQ Project]

Martin, Christopher (2007) Ipswich City Council water supply infrastructure capacity high water usage and water meter accuracy. [USQ Project]

Maunder, David (2007) An investigation into the establishment of a continuously operating GPS reference station at Dubbo City Council, Central West NSW. [USQ Project]

McKay, Michael (2007) Electrical training package for mining area C. [USQ Project]

McKie, Scott (2007) Development of a portable high-wall lighting system. [USQ Project]

Mitchell, Andrew (2007) On-line equipment condition monitoring based maintenance. [USQ Project]

Mohr, Logan (2007) Effects and controls of lateral refraction in underground coal mines. [USQ Project]

Muir, Paul John (2007) Siphons as furrow irrigation measurement devices. [USQ Project]

Muller, Ben (2007) Irrigation performance and water use efficiency of turf production. [USQ Project]

Mylne, George (2007) The effectiveness of a multiple-frequency global navigation satellite system (GNSS)on multipath mitigation. [USQ Project]

Newman, Anthony (2007) Interactive map associated with tourism. [USQ Project]

O'Donnell, Clayton (2007) Total effect on the environment of electric/hybrid electric vehicle batteries. [USQ Project]

O'May, David Victor (2007) A study of pavement performance on the Gatton Bypass Duplication. [USQ Project]

Ong, Chin How (2007) Life cycle assessment of cement in Malaysia. [USQ Project]

Paelmke, Haridass (2007) Human resource management practices and diversity management in German and Indian companies - a comparative analysis. Doctorate (other than PhD) thesis, University of Southern Queensland. (Unpublished)

Parkin, Damion Ian Harcourt (2007) Design of a rear suspension configuration for a live axle race car to achieve optimum handling characteristics. [USQ Project]

Price, Daniel (2007) A comparative review of attributes of engineers in senior management roles. [USQ Project]

Saunders, Joseph Ian (2007) Porous weirs for flood mitigation. [USQ Project]

Schuh, Stephen Andrew (2007) Estimating rippability of Brisbane Tuff using quantitative and qualitative characteristics and a modified approach to an existing rippability rating method. [USQ Project]

Sibanda, Khutula (2007) Adaptation practices and export performance: a study of exporting firms in Zimbabwe. Doctorate (other than PhD) thesis, University of Southern Queensland. (Unpublished)

Sinderberry, Mark (2007) Accuracy assessment of 3D laser scanning data utilising different registration methods. [USQ Project]

Stewart, Robert (2007) Design of electro-hydraulic controlled poppet valves. [USQ Project]

Steyn, Marius (2007) Review and redesign of Pilbara Iron 24MTA conveyor system. [USQ Project]

Sullivan, Steven Michael (2007) Research, design and develop a pipe latching/unlatching device that can be used to help automate the pipe tripping process. [USQ Project]

Sullivan, T. (2007) Embedded control system for biogas digesters. [USQ Project]

Tan, Heng Tsin Stanley (2007) Recycling of used electronics in Singapore. [USQ Project]

Temple, Christopher Jed (2007) Impediments to identifying freehold land rights in N.S.W. [USQ Project]

Walker, Bryan Patrick (2007) Cost-effective 3D modelling. [USQ Project]

Weatherley, Mark Geoffrey (2007) The effect of compaction on the design life of rehabilitated insitu cement powder stabilised pavements. [USQ Project]

Wei, Lay Kian (2007) Life cycle assessment of CSR autoclaves lightweight concrete production in Malaysia. [USQ Project]

Weis, Paul Raymond (2007) Cost effectiveness of street lighting. [USQ Project]

Weston, Bill Thomas (2007) Design and trial of an alternative option for suburban sewerage pump stations. [USQ Project]

Wong Wan Sie, Winxie (2007) Analysis and design of curtain wall systems for high rise buildings. [USQ Project]

Worrall, Andrew (2007) Development of quality assurance procedures for cadastral surveying using GPS technology. [USQ Project]

Yok Meng, Tan (2007) Design of a microclimate ventilation system. [USQ Project]

de Leeuw, Gert Johannes Schreuder (2007) Analysis of hydraulic transients in pipeline networks. [USQ Project]