Browse by Fields of Research (ANZSRC 2020)

Sutcliffe, Wayne (2016) Design of a truss bridge for low cost using structural topology optimisation. [USQ Project]

Wilson, Matthew (2016) Deterioration of timber bridges using a Fault Tree Analysis. [USQ Project]

Nankervis, Gary A. (2016) Development of a computer simulation for scouring around bridge piers. [USQ Project]

Peng, Zhuohao (2016) Geodesic dome structural analysis and design. [USQ Project]

Fraser, Andrew (2016) Study of blast effects on structures. [USQ Project]

Woolley, Reece (2016) The performance evaluation of bridge culverts reinforced with GFRP bars. [USQ Project]

Eaton, John (2015) Investigations into the effect of contaminants on permeable concrete effectiveness during its life cycle. [USQ Project]

Jordan, Bradley (2015) Analysis of bridges subjected to flood loadings based on different design standards. [USQ Project]

Walker, Scott (2015) Analysis of the behaviour of composite transom decks for railway bridges. [USQ Project]

Fraser, Carl (2015) Vulnerability of bridges in extreme flood events based on element failure. [USQ Project]

Knipe, Russell Alexander (2014) 3D fluid modelling of the O.O. Madsen Bridge during flood. [USQ Project]

Knight, Tracey Anne (2014) Alkali-silica reaction in concrete bridge piles: treatment and strengthening with fibre-reinforced polymers. [USQ Project]

Hancock, Nashua Thomas (2014) Natural disaster risk management in South Asia a dissertation. [USQ Project]

Brailsford, Steven (2013) Cathodic protection of reinforced concrete bridges in the marine environment as an asset management tool. [USQ Project]

Serra, Michael Peter (2013) Geotechnical stability analysis using student versions of FLAC, PLAXIS and SLOPE/W. [USQ Project]

Sams, Mathew Steven (2013) Numerical and physical modelling of a 2D tunnel heading at collapse. [USQ Project]

Hemming, Steven (2012) Sandwich panels for slab applications. [USQ Project]

Klinge, Craig Desmond (2012) Behaviour of gang-nail plated timber joints in tension perpendicular to the grain. [USQ Project]

O'Leary, Haydn (2012) Dynamic characterisation of cellular cores and sandwich beams. [USQ Project]

Reed, Mark Edward (2012) Effects of fibres and curing temperature on geopolymer concrete. [USQ Project]

O'Keeffe, Andrew (2011) Behaviour of polymer concrete for infilling fibre composite tubes. [USQ Project]

Tomkins, Brock William (2011) Chemical resistance of geopolymer concrete against H2SO4 & NaOH. [USQ Project]

Brown, Steven (2011) Design of a high-shear geopolymer concrete mixer. [USQ Project]

Dakin, Anthony (2011) Investigation of the suitability of finger jointed structural timber for use in nail plated roof trusses. [USQ Project]

Veenstra, Nathaniel (2011) Optimum strut-and-tie model for a cantilever curved wall. [USQ Project]

Dudley, Samuel (2011) Stability of underground tunnelling using relaxation techniques. [USQ Project]

Prasad, Nitesh Nitin (2011) Verification of simplified optimum designs for reinforced concrete beams. [USQ Project]

Kennedy, Jotham Ariel (2010) Experimental investigation into the uplift capacity of ground anchors in sand. [USQ Project]

Lewers, Glyn Alan (2010) Design of a frame/structure for a large wastewater treatment pond. [USQ Project]

Daly, James (2010) Design, construction and performance of buildings foundations on soft clays in the Brisbane region. [USQ Project]

Gibson, David Eric (2010) Evaluating comparative performance of various shaped bridge piers: experimental investigation of sediment transport and scouring. [USQ Project]

Bajracharya, Rohan Muni (2010) Structural evaluation of concrete-expanded polystyrene sandwich panels for slab applications. [USQ Project]

Cole, Andrew James Shorten (2009) A comprehensive study of footing on c-φ soil slopes - numerical and physical modelling. [USQ Project]

Lyle, Nathan Ross (2009) Comprehensive design charts for the footing on slope problem. [USQ Project]

Saunders, Michael Joseph (2009) Investigation of the relationship between experimental bridge piers and erosion within a flow. [USQ Project]

Yu, Yu Wah (2009) Pile driving analysis via dynamic loading test. [USQ Project]

Arnold, Matthew David (2008) A two-dimensional analysis of the bearing capacity of footings near slopes. [USQ Project]

Gibson, Duane Nikalia (2008) Interaction of recycled concrete and geogrid reinforcement material 14m high reinforced earth wall. [USQ Project]

Kelman, Oliver (2008) Measuring and monitoring of grain silos using laser scanning and total stations. [USQ Project]

Waldock, David A. (2008) The maintenance of 'moment continuity' within structural concrete beam steps. [USQ Project]

Wong Wan Sie, Winxie (2007) Analysis and design of curtain wall systems for high rise buildings. [USQ Project]

Green, Christopher Ross (2007) Testing and analysis of fibre composite beams in a bridge structure. [USQ Project]

Heron, Katherine Margaret Monica (2007) Vortex shedding on bridge piers. [USQ Project]

Klein, Lindsay Edward (2006) Finite element analysis of a composite bridge deck. [USQ Project]

Walker, Craig Louis (2006) Local and post-local buckling of steel tubes in thin-walled circular concrete-filed steel tubular columns. [USQ Project]

Bolger, Paul (2006) Strengthening of headstocks with vertical clamping to enhance shear capacity. [USQ Project]

Breust, Tristan David (2006) The design and structural analysis of a steel portal framed shed for the Darling Downs Historical Rail Society. [USQ Project]

Chiu, Kwong Man Karen (2006) The use of recycled concrete aggregate in structural concrete around South East Queensland. [USQ Project]

Kronk, Matthew Neil (2006) Ultimate strength of steel-concrete composite beams under combined bending and torsion. [USQ Project]

Figg, Matthew Lorne (2006) Using renewable plantation timber as a replacement option for unrenewable hardwood girders in bridges. [USQ Project]

Lee, Chang Long (2005) A study and evaluation on Seri Wawasan bridge in Putrajaya, Malaysia. [USQ Project]

Kannapiran, Ram Kumar M. (2005) A study and evaluation on SMART Project, Malaysia. [USQ Project]

Leow, Jia Hui (2005) A study of building foundations in Malaysia. [USQ Project]

Gounder, Sangeevam (2005) Design of steel structures under fire. [USQ Project]

Whittaker, Todd (2005) Effect of existing cracks in shear strengthening of concrete girders with external post-tensioning. [USQ Project]

Chuah, Yew Pin (2005) Evolutionary structural optimization for multi component structural systems. [USQ Project]

Davis, Shawn Wayne (2005) Investigation of the flexural strengthening of concrete beams using external prestressing. [USQ Project]

Ngo, Nelson, Shing Chai (2004) High-strength structural concrete with recycled aggregates. [USQ Project]

Wong, Chuan Mein (2004) Use of short fibres in structural concrete to enhance mechanical properties. [USQ Project]

Lau, Chau Chin (2004) A study on concrete faced rockfill dams. [USQ Project]

Heng, Hern (2004) Design of structural glass fitting for seismic condition. [USQ Project]

Cheong, Fong Chin (2004) Effect of admixtures on the use of short fibres in structural concrete to enhance mechanical properties. [USQ Project]

Choo, Yeun Feong (2004) Seismic stability of slope. [USQ Project]

Jobling, Lindsay Peter (2004) Shear strengthening of headstocks using prestressed fibre strips. [USQ Project]

Krinke, Mark James (2004) The effect of admixtures in concrete containing manufactured sand. [USQ Project]