Items where Year is 2021

A

Alshammari, Mehsal (2021) Simulation of impact behaviour of polymer composite. [USQ Project]

Altamimi, Fares (2021) Simulation on fatigue behavior of fiber composites considering the common defects. [USQ Project]

Amerri, Ali (2021) A Simulation Study on Bamboo Fiber Based Composite Bricks. [USQ Project]

B

Ball, Ryan (2021) Shear strength properties of sand with fines for various moisture contents. [USQ Project]

Batstone, Seamus (2021) A review of smoke dispersion models for smoke pollution hazard mitigation associated with controlled, forest fuel reduction burns. [USQ Project]

Batterham, Jesse (2021) Power Assist Add-on for Manual Wheelchairs. [USQ Project]

Bell, Wayne (2021) Hydrologic Catchment Modelling to Supplement Potable Water Supply in Central Western NSW. [USQ Project]

Bellew, David (2021) The roles of energy networks in providing a sustainable delivery of the ACT Government's target for net zero emissions. [USQ Project]

Bielefeld, Kristin (2021) Torsional Behaviour of Precast Concrete Planks Reinforced with Glass Fibre Reinforced Polymer Bars. [USQ Project]

Blessing, Benn (2021) Developing a software interface between Dräger Winaccess API and influxDB Time series database. [USQ Project]

Brian, Ashley (2021) Feasibility on Vertical Column Gravity Separation of Class O Fluids. [USQ Project]

Brisolin, Jacob (2021) Application of Automated Road Fault Detection for Improved Asset Maintenance Planning. [USQ Project]

Browne, Thomas (2021) Resilience of Existing Drainage Networks to Climate Change Effects. [USQ Project]

C

Cain, Joshua (2021) Feasibility of Fibre-Reinforced Polymer (FRP) Composites for Engine Pushrods. [USQ Project]

Cale, Florentino (2021) A Case Study in Failure Analysis and Material Selection of Corrosion Under Insulation (CUI) of Piping Components in Oil and Gas. [USQ Project]

Carter, Joshua (2021) Drone Swarm Simulation for Tracking High Capability Malicious Drone. [USQ Project]

Castles, Simon (2021) Precision RTK GNSS for low-cost robotic systems. [USQ Project]

Chambers, Aaron (2021) Feasibility Study to Upgrade DOL Driven Pumps to Variable Speed Drives. [USQ Project]

Clarke, Michael (2021) Analysis of improving Railway transition zones in the Queensland Rail network: intervention in super structure components. [USQ Project]

Clarke, Terrence (2021) Heat Exchanger Performance and Optimisation. [USQ Project]

Compton, Peter (2021) SCADA Test Environment for Cybersecurity Analysis of Critical Infrastructure Systems. [USQ Project]

Coutts, Aaron (2021) Optimal fuel cost controller design for a helicopter/twin rotor system. [USQ Project]

Crosby, James (2021) Analysis of Flow Characteristics Within USQ's Icing Wind Tunnel. [USQ Project]

D

Dixon, Andrew Peter (2021) Develop a framework for residential construction cost estimating in the Australian market. [USQ Project]

E

Eager, Drew (2021) Investigation of Potential Benefits of BIM to Provide Efficiencies in the AEC Industry. [USQ Project]

G

George, Phillip (2021) An Investigation into design and construction of a leachate dam in Lismore. [USQ Project]

Gooneratne, Shaun (2021) Digitally Fabricated Reduction Drive for Low-Cost Robotics Applications. [USQ Project]

Gould, Jackson (2021) Bucking Units - A More Effective Approach. [USQ Project]

Guthrie, James Stuart (2021) Low-cost data logger for electrical respiration sensor. [USQ Project]

H

Hardless, Benedict (2021) Cognitive Radio for Improved NBN Access in Regional Areas. [USQ Project]

Harris, Rachael (2021) Optimising spider survey techniques. Honours thesis, University of Southern Queensland. (Unpublished)

Hartmann, Gregory (2021) Examining the Re-entry of a Tumbling Object During Freefall. [USQ Project]

Heap, Harvey (2021) Behaviour of GFRP-Reinforced Precast Concrete Decks Under Uniform Loading. [USQ Project]

Heath, Michael (2021) Design of an Ultra-Compact and Lightweight Wheelchair to Carry onto Passenger Planes. [USQ Project]

Heinemann, Mickayla (2021) Improving ecological surveys of Australian frogs. Honours thesis, University of Southern Queensland. (Unpublished)

Higo, Kieran (2021) Time-optimal Controller Design for An Auto TCD Probe. [USQ Project]

Hollingworth, Leigh (2021) Evaluation of the Performance of Recycled Concrete Aggregate in Fresh Concrete for Manufacturing Fence Posts. [USQ Project]

Howie, Roslyn (2021) Strength in diversity: Investigating methods to determine genetic variability in a captive colony of small carnivorous marsupials, the fat-tailed dunnart Sminthopsis crassicaudata. Honours thesis, University of Southern Queensland. (Unpublished)

J

Jadan, Dima (2021) Evaluation of the Suitability of Fibre Composites for Road Bridges. [USQ Project]

Jawad, Poonam (2021) Identification of the effectiveness of various commercial COVID -19 Masks using ANSYS software. [USQ Project]

Jennings, Nicholas (2021) Identifying Abnormalities in Indoor Environments using Obstacle Detection Programming. [USQ Project]

K

Kapor, Alex (2021) Apply Advanced Process Control to Fine Screening Circuit in Large Mineral Processing Plant. [USQ Project]

Kellner, Nicholas (2021) Investigating Urban Stormwater Collection for Potable use; a Feasibility Study for Gloucester, NSW. [USQ Project]

L

Leis, Lupesina (2021) What effect does diet have on body condition of unowned cats in the Southern Downs Region, Queensland? Honours thesis, University of Southern Queensland. (Unpublished)

M

McCabe, Carol Lorraine (2021) Exploring dimensions of risk management practice in Australasian universities: a mixed methods study. Doctorate (other than PhD) thesis, University of Southern Queensland. (Unpublished)

P

Price, Daniel (2021) Natural Language Processing to support Nurse-to-Patient allocation in acute care. [USQ Project]

Priebbenow, Aidan (2021) Effects of joining systems and sheathing on the in-plane shear behaviour of modular composite wall systems. [USQ Project]

Priest, Eli (2021) Unique Identification of Bluetooth Transmitters Through RF Fingerprinting. [USQ Project]

Q

Quinlivan, Patrick (2021) Albury Wodonga Bus Network Assessment Model. [USQ Project]

R

Raphael, Brooke (2021) The cytotoxic properties of novel compounds from a Preussia sp. isolate on PC-3 prostate cancer cells. Honours thesis, University of Southern Queensland. (Unpublished)

Raymond, Tom (2021) Uninterrupted Power from Wind for an Off-grid Communication Setup. [USQ Project]

Reid, Amber Hope (2021) Development of an Innovative Flooring System for Residential and Light Industrial Buildings. [USQ Project]

Reitano, Kieran (2021) Advanced Process Control Applications in Complex Industrial Processes. [USQ Project]

Remington, Callum (2021) A comparative study on determining primary and secondary stress levels in boiler valve bodies between FEA simulations, RemLife, and the ASME BPVC Section III Division I NB approach. [USQ Project]

Reynolds, Brayden (2021) Design optimisation of drag struts for seismic and wind loading in multi-storied structures. [USQ Project]

Ruelcke, Chris (2021) Structural design and considerations of steel modularized and transportable substations. [USQ Project]

S

Siddans, Ryan (2021) Effectiveness of earth mat when jointing high voltage underground cables (33 kV and above). [USQ Project]

Sims, Daniel (2021) Turbofan Engine Crystal Icing: Computational Fluid Dynamics Study. [USQ Project]

Singh, Anshdeep (2021) Investigation on the properties of concrete with Expanded Polystyrene. [USQ Project]

Smith, Callum (2021) Predictions for the Hydrological Performance of the Parua Stream Dam. [USQ Project]

Smith, Jabin (2021) Monitoring Elderly Falls in the Home Using Computer Vision. [USQ Project]

Somerville, Jarrod (2021) Alluvial Geology of North-West Sydney and its Impact on Development. [USQ Project]

Staats, Thomas Patrick (2021) Photogrammetry UAV and terrestrial LiDAR, A comparative review in Volumetric surveys. [USQ Project]

Stringer, Samuel Hall (2021) The Ability to Produce Type II Protection Using a Variable NER. [USQ Project]

T

Thrower, Ryan (2021) BIM standardisation and its effect on project delivery in the Australian civil design and construction industry. [USQ Project]

Towers, Haley (2021) Evaluation of Signalisation as a Treatment for Roundabouts. [USQ Project]

W

Walker, Jessica (2021) Developing a Benchmark for the Energy Efficiency of Residential Modular Housing Designs. [USQ Project]

Wallin, Anthony (2021) Machine Vision for Locomotive Control. [USQ Project]

Wallis, Matthew (2021) The Efficiencies that Building Information Modelling (BIM) 3D Visualisation can provide the residential sector of the Australian Construction Industry. [USQ Project]

Warry, Nicholas (2021) Design and Feasibility Study of Hydro Generators at Various Stages of Mains Water Supply. [USQ Project]

Welsh, Daniel (2021) Optimal Sizing of Stand Alone Power Systems to Avoid Capital Expenditure on Rural Distribution Networks. [USQ Project]

Whiting, Ella (2021) Fracture Toughness of Hybrid Hierarchical Honeycombs. [USQ Project]

X

Xeros, Saxon R. (2021) Comparative Evaluation of the In-Plane Shear Behaviour of GFRP Composite Wall Systems With and Without Window Openings. [USQ Project]

Y

Young, Lauren (2021) Analysis of the Suitability of Roundabouts for Heavy Vehicles driving at High Speeds in Queensland. [USQ Project]