Items where Year is 2022

Ahlers, Corey (2022) Development Of an Adaptive Control Mechanism to Enable Automated Irrigation on Gantry Robots. [USQ Project]

Allen, Gregory (2022) Design of a Small-Scale Pyrolysis Machine. [USQ Project]

Alves, Billy Michael (2022) Analysis of Inflow and Infiltration in a Low-Pressure Sewer System. [USQ Project]

Ansell, Cameron (2022) Understanding ballasting agent dynamics when recycled in a ballasted flocculation process and impact on performance. [USQ Project]

Armanasco, Matthew (2022) Cardiac Biometric Authentication Using Channel State Information. [USQ Project]

Baker, Ted (2022) Optimisation of a Hydro-Pneumatic Accumulator using Computational Fluid Dynamics. [USQ Project]

Bischof, Lachlan (2022) Off-Highway Platooning Sensor Selection and Survivability. [USQ Project]

Bourke, Christopher (2022) UAS autonomous drop zone assessment and adaptive delivery. [USQ Project]

Chambers, Brad (2022) Vibration Analysis of an Excavator to Investigate the Effects on the Operator. [USQ Project]

Coogan, Tim (2022) A Water Sensitive Urban Design approach to mitigate the effects of Rainfall Derived Infiltration and inflow on existing sewerage systems. [USQ Project]

Coonan, Tom (2022) A New Supplementary Binder in Foamed Bitumen Stabilisation. [USQ Project]

Cooper, Brodie (2022) CFD Analysis of a Primary Nozzle Vortex Generator on Steam Ejector Performance. [USQ Project]

Cripps, Camilla (2022) Trauma-Informed Editing Practice: A Framework. Coursework Masters thesis, University of Southern Queensland. (Unpublished)

Denman, Michael (2022) Identifying the Types and Causes of Construction Defects in Multi-Unit Dwellings. [USQ Project]

Di Mauro, Matthew N. (2022) The Comparative Analysis of the Design of Shredder Hammer Tips and Bars in Sugar Milling Applications. [USQ Project]

Donnelly, Adam John (2022) SICK vs Intrinsic. [USQ Project]

Downing, Elizabeth (2022) Shear Strength Properties of Clean and Clay Infilled Rock Joints: An analysis of the impact of moisture content under CNL conditions. [USQ Project]

Drummond, Gordon Alexander (2022) Design and Manufacture of Scaled FSAE Chassis Using Generative Design and Topology Techniques. [USQ Project]

Elliot, Jake Cameron (2022) PCB standards. [USQ Project]

Faivre, Yohanne (2022) SPT - CPT Correlation in South East Queensland, Australia. [USQ Project]

Ferriday, Daniel Goward (2022) Scour Risk Assessment of the O. O. Madsen Bridge During Flood. [USQ Project]

Ford, Albie (2022) Analysis of Traffic Speed Deflectometer (TSD) data on State Highways in Southland, New Zealand. [USQ Project]

Francis, B. (2022) Lunar Resources: Geosensing for Autonomous Exploration. [USQ Project]

French, Corey R. M. (2022) Comparative study of modular construction methodologies within residential and commercial applications. [USQ Project]

Fritz, Patrick (2022) Design Analysis of Guy Wires of Communication Towers: Industry Based Project Proposed by Raytheon Australia. [USQ Project]

Gough, Tom (2022) Compressive Behaviour of Short Engineered Cementitious Composite Columns Containing Recycled Polyethylene Terephthalate Aggregate. [USQ Project]

Green, Sam (2022) Investigation into implement status awareness for autonomous tractors. [USQ Project]

Grimshaw, Hannah (2022) Overlap of habitat use by foxes, other introduced predators and their prey. Honours thesis, University of Southern Queensland. (Unpublished)

Hall, Nick (2022) Unsealed Road Grading Techniques. [USQ Project]

Henderson, Adam (2022) Combination Harvest and Bale Machinery’s Impact on Cotton Productivity in High Clay Cotton Fields of Northern NSW. [USQ Project]

Hill, Hamish (2022) Australian Carbon Credit Unit Calculator for Concrete Recycling Facility Use. [USQ Project]

Hollingshead, Fraser (2022) Compaction density of partially saturated soils. [USQ Project]

Irving, Jonathan (2022) The analysis of torque required for sealing of threaded brass flare fittings. [USQ Project]

Jennings, Clinton (2022) An integrated “Mine to Mill” automation methodology applied to Sanbrado. [USQ Project]

Keenan, Mike (2022) Bridge load assessment using machine learning and weigh-in-motion data. [USQ Project]

Levay, Gabriella (2022) Competition between the greater bilby and European rabbit at claypans in Currawinya National Park. Honours thesis, University of Southern Queensland. (Unpublished)

McLaughlin, Ayrton (2022) Effective techniques for reducing the effects of skilled labour shortages in the Australian construction sector. [USQ Project]

McManus, Brendan (2022) Use of Expanded Polystyrene (EPS) Integrated with Steel Fibres as Coarse Aggregate Replacement in Concrete. [USQ Project]

Middenway, Jayden (2022) Digital fabrication with collaborative robotics. [USQ Project]

Miles, Emma (2022) Simulation of Venus-like candidate atmospheres to refine the future understanding of terrestrial exoplanet characterisation. Honours thesis, University of Southern Queensland. (Unpublished)

Neale, Luke (2022) Two-stage method linking spatial point processes and linear mixed models for plant root tip data. Honours thesis, University of Southern Queensland. (Unpublished)

O'Connor, Danny (2022) Soil compaction dependence on sub-field spatial soil constraint variability. [USQ Project]

O'Donoghue, Grant (2022) Evaluation of engineering solutions to protect Cairns from coastal inundation due to storm surge and sea level rise. [USQ Project]

O'Keeffe, Myles E. (2022) Feasibility of using Thermoelectric Generators to Improve Fuel Efficiency in Existing In-service Vehicles. [USQ Project]

Perkins, Shaun (2022) Evaluation of Issues Affecting Stabilised Granular Pavements. [USQ Project]

Rath, Jaymes (2022) Identifying and implementing best practice models for management of unsealed road networks in NSW Local Government to achieve sustainability. [USQ Project]

Rayner, Andrew (2022) Behaviour of GFRP Reinforced Concrete Slab on Ground. [USQ Project]

Sale, Maggie (2022) Lessons Learnt from Bridge Reconstructions Post Successive Disaster Events in the Eurobodalla LGA. [USQ Project]

Schneekloth, Jenelle (2022) Evaluation of geocomposite reinforced pavement for suitability in Queensland roads. [USQ Project]

Schuster, Robert (2022) Airborne Observation Controller. [USQ Project]

Sharpe, Kyal (2022) Development of Smart Sewer Pipeline Fault Detection Method using CCTV Inspection Data and Deep Learning. [USQ Project]

Sheehan, Michael (2022) Fabrication and design of a Stirling Engine powered by hydrogen. [USQ Project]

Shrestha, Ashesh (2022) Design of low-density high performing lattices. [USQ Project]

Shrestha, Nabin (2022) Remote Controlled Motorised Laser Alignment Trolley. [USQ Project]

Tomac, Beau (2022) Development of an Improved Concrete Defect Object Detection Method for Edge AI Inference Technology. [USQ Project]

Wells, Keith (2022) Geometry Refinement of Venturi Flow Meters to Reduce Energy Losses in Water and Air Applications. [USQ Project]

Wells, Rowan (2022) Transdisciplinary Literature Reviews and Research-based Practice for Designing an Original Novella and Original Prisoner’s Dilemma Model with an Ending to Criminal Motivations and the Selfish Binary. Honours thesis, University of Southern Queensland. (Unpublished)

Wilson, Stephanie (2022) Water Budgeting & Urban Water Demand Management in Townsville. [USQ Project]

Wium, Coenraad (2022) Optimal Model Designs for Community Batteries. [USQ Project]

Wyper, Rye (2022) Benefits and Challenges of Applying Travelling Wave Technology to Sub-transmission Networks. [USQ Project]