Items for Faculty/School / Institute/Centre :
Historic - Faculty of Engineering and Surveying - Department of Agricultural, Civil and Environmental Engineering (Up to 30 Jun 2013)

USQ Project

Greig, Edward Stephen (2013) Numerical simulation of water waves in reservoirs affecting evaporation. [USQ Project]

Hemming, Steven (2012) Sandwich panels for slab applications. [USQ Project]

Klinge, Craig Desmond (2012) Behaviour of gang-nail plated timber joints in tension perpendicular to the grain. [USQ Project]

Handley, Robert (2012) Carbon offsetting through soil carbon sequestration for the coal mining industry: an application of a soil carbon modelling. [USQ Project]

Smith, Scott David (2012) Determination of a strategic planning approach for maintenance management of a major road network. [USQ Project]

Nielson, Fiona Jane (2012) Development and evaluation of a field mobility data capture system for condition assessment of assets. [USQ Project]

O'Leary, Haydn (2012) Dynamic characterisation of cellular cores and sandwich beams. [USQ Project]

Reed, Mark Edward (2012) Effects of fibres and curing temperature on geopolymer concrete. [USQ Project]

Taylor, Jarrod Lee (2012) Evaluation of the capacity of signalised two lane roundabouts. [USQ Project]

Dang, Aaditi (2012) Herbicides wash off from cane trash by rainfall. [USQ Project]

Warren, Bradley (2012) Investigating mechanisms for effluent pond sealing: the effect of suspended organic particulate on soil hydraulic conductivity. [USQ Project]

Wieck, Travis (2012) Soil chemistry equilibrium as influenced by solution volume and concentration. [USQ Project]

Black, Gerard Wiiliam (2012) The investigation of the sustainability of a regional approach to Water Sensitive Urban Design using a Triple Bottom Line Assessment. [USQ Project]

Whittaker, Adam (2012) The safety benefit of continuous narrow painted median strips. [USQ Project]

Peters, Renee (2011) Advanced analysis of shallow foundations located near slopes. [USQ Project]

Graham, Kim (2011) Local government greenhouse gas abatement reporting. [USQ Project]

Olm, David William Charles (2011) Management of road reconstruction and repair following a flooding disaster. [USQ Project]

Evans, Darryl (2011) Prototype development for a procurement and electronic document management system. [USQ Project]

Fichera, Anthony (2011) A practical comparison of VISSIM and SIDRA for the assessment of development impacts. [USQ Project]

Randall, Neil William (2011) A preliminary analysis of the effectiveness of the new QLD GDL program. [USQ Project]

Keleher, Matthew (2011) Analysis of high-speed rural traffic crashes within the South-West district of Toowoomba regional council. [USQ Project]

O'Keeffe, Andrew (2011) Behaviour of polymer concrete for infilling fibre composite tubes. [USQ Project]

Truasheim, Barak (2011) CFD modelling of a pump intake. [USQ Project]

Tomkins, Brock William (2011) Chemical resistance of geopolymer concrete against H2SO4 & NaOH. [USQ Project]

Harrington, Daniel (2011) CSG water as a medium to grow marine microalgae for biofuel production. [USQ Project]

Wilson, Paul (2011) Effectiveness of lime stabilisation on reactive soils for main roads. [USQ Project]

Delahunty, Bruce (2011) Elevated highways – a solution to Brisbane’s traffic congestion? [USQ Project]

Zeller, Karl (2011) Evaluation of the operational characteristics of heavy vehicles at signalised intersections in Queensland. [USQ Project]

Mautoga, Marau (2011) Fracture toughness of glass powder reinforced vinyl ester resin post cured in a conventional oven using flexural test. [USQ Project]

Fenn, Scott P. (2011) Investigation into relocatable home design and construction. [USQ Project]

Bauer, Amelia (2011) Investigation into the biochemical methane potential of abattoir wastewater. [USQ Project]

Davydov, Alexey (2011) Investigation of the structural failure of plywood noise barriers. [USQ Project]

Dakin, Anthony (2011) Investigation of the suitability of finger jointed structural timber for use in nail plated roof trusses. [USQ Project]

Veenstra, Nathaniel (2011) Optimum strut-and-tie model for a cantilever curved wall. [USQ Project]

Meredith, Tyronne (2011) Options for the replacement of aging bridges under local authority control in rural areas of Queensland. [USQ Project]

Mohr, David (2011) Performance characterisation of pressure regulation devices used in broad-acre irrigation. [USQ Project]

Dudley, Samuel (2011) Stability of underground tunnelling using relaxation techniques. [USQ Project]

Yin, Matthew (2011) Using local gravel sources and granular stabilisation for the production of pavement gravels in the Toowoomba region. [USQ Project]

Prasad, Nitesh Nitin (2011) Verification of simplified optimum designs for reinforced concrete beams. [USQ Project]

Fitzgerald, Danial (2011) Managing the repair of transport infrastructure after a natural disaster. [USQ Project]

Walter, Nathan Johan (2010) Development of a bridge asset management plan for Southern Downs Regional Council. [USQ Project]

Kennedy, Jotham Ariel (2010) Experimental investigation into the uplift capacity of ground anchors in sand. [USQ Project]

Cox, Jeremy Neil (2010) Advantages and practicality of using a 2D hydrodynamic model in comparison to a 1D hydrodynamic model in a flood prone area. [USQ Project]

Rowlings, David Selwyn (2010) An experimental and theoretical investigation of side weirs. [USQ Project]

Skipworth, Julian (2010) An investigation and quantitative analysis of the impacts on stream flow and fluvial erosion associated with urbanisation of a small catchment. [USQ Project]

Shaw, Mark Andrew (2010) An investigation of roles and development pattern of regional airports, Queensland Australia. [USQ Project]

Palmer, Matthew Alan (2010) Analysis of the feasibility of a 3D model for use in civil construction (creating a 3D model for the first span of a bridge). [USQ Project]

Coe, Daniel (2010) Asset management for Tamworth Regional Council’s sewer network. [USQ Project]

Stanton, Dale John (2010) Atterberg limits and their relationship to longitudinal cracking in granular pavements. [USQ Project]

Fahey, Lawrence John (2010) Decision support system for assessing the benefits of incorporating swabbing facilities into water pipelines. [USQ Project]

Lewers, Glyn Alan (2010) Design of a frame/structure for a large wastewater treatment pond. [USQ Project]

Daly, James (2010) Design, construction and performance of buildings foundations on soft clays in the Brisbane region. [USQ Project]

Martin, Joseph A. (2010) Driving problems encountered in the UAE by newly arrived expatriates and tourists. [USQ Project]

Caunce, Catherine May (2010) Effective road pavement design for expansive soils in Ipswich. [USQ Project]

Bailey, Thomas Sullivan (2010) Environmentally friendly natural waste materials for use in civil structures. [USQ Project]

Gibson, David Eric (2010) Evaluating comparative performance of various shaped bridge piers: experimental investigation of sediment transport and scouring. [USQ Project]

Gould, Adam Mark (2010) Finite volume solution of the unsteady free surface flow equations. [USQ Project]

Pufelski, Nadine (2010) How effective is microalgae treatment of different wastewaters for simultaneous nutrient removal and lipid production for bio-fuel? [USQ Project]

Hanson, Scott (2010) Improvement and performance of pavement gravels used by Toowoomba Regional Council for unsealed roads. [USQ Project]

Malvern, Jerome Liam (2010) Investigation of high impact capacity composite material for civil infrastructure. [USQ Project]

Zanetti, Ashley (2010) Investigation of pavement design for low volume rural roads. [USQ Project]

Barnett, Paul Jonathan (2010) Life cycle assessment (LCA) of liquefied natural gas (LNG) and its environmental impact as a low carbon energy source. [USQ Project]

Magarry, Anthony John (2010) Management of physical assets – advanced asset management planning. [USQ Project]

Elphinstone, Aaron Daniel (2010) Optimisation of pigging infrastructure in design. [USQ Project]

Davies, Neil (2010) Pedestrian characteristics and control for the Toowoomba city centre master plan area. [USQ Project]

Frazer, Peter (2010) Relational contracting – investigation of relational contracting behaviours across various project delivery models. [USQ Project]

Turner, Alan (2010) Structural performance of cross laminated timber panels as walls. [USQ Project]

Pola, Nigel Peter (2010) Synthesis of modified phenolic resins using renewable materials for advanced composites in civil engineering structures. [USQ Project]

Cameron, Kirsty (2010) Technical feasibility of a salinity trading scheme for the licensing of coal mine discharges in the Fitzroy Basin. [USQ Project]

Marstella, Joseph Edward (2010) The concept, analysis and critical thinking involved in flow net theory - a project based learning approach using cofferdams. [USQ Project]

Harch, Brian Joseph Luke (2010) The investigation into the optimisation of cross laminated timber panels for use in the Australia building industry. [USQ Project]

Seccombe, Andrew James (2010) The use of Fibre Bragg Grating (FBG) sensors in geotechnical applications. [USQ Project]

Cooper, Mark Dennis (2010) Improve waste recycling potential through the conversion of normal household waste into biogas. [USQ Project]

Hansen, Leigh (2010) Quantifying the reduction in hydraulic conductivity of disturbed soil columns as a function of the salinity and sodicity of applied water. [USQ Project]

Cole, Andrew James Shorten (2009) A comprehensive study of footing on c-φ soil slopes - numerical and physical modelling. [USQ Project]

Lyle, Nathan Ross (2009) Comprehensive design charts for the footing on slope problem. [USQ Project]

Douglas, Nadine Sarah (2009) Development of an asset maintenance program for Darwin City Council. [USQ Project]

Langdon, Aaron G. (2009) Traffic induced moisture entry into road pavements. [USQ Project]

Dakers, Nicole (2009) A cost benefit analysis of rural residential water supply – constant flow vs. full pressure. [USQ Project]

Crone, Jeffrey John (2009) Alternate pavement types on reactive soils in the Ipswich Council area. [USQ Project]

Plain, Matthew (2009) Behaviour of innovative fibre composite sandwich panels for structural applications. [USQ Project]

Pickford, Christopher Ian (2009) Behaviour of laminated fibre composite sandwich girders. [USQ Project]

Mayen, David Ayuen (2009) Composites from natural renewable resources in civil engineering: Epoxidized vegetable oil with epoxy resin, fly ash and sawdust fillers(mechanical, physical and structural properties). [USQ Project]

Gould, Nicholas (2009) Conceptual design of a sustainable energy-waste solution for the residential sector. [USQ Project]

Vaipulu, Seini 'Ela Uatekini (2009) Design a prototype solar dryer for drying sea cucumber. [USQ Project]

Howarth, Rowan (2009) Design and documentation of Bairnsdale regional landfill - Cell 3 Johnston’s Road, Bairnsdale. [USQ Project]

Althaus, Kimberley (2009) Effect of irrigation management on nitrate movement under a lettuce crop. [USQ Project]

Burton, Bruce (2009) Griffin Road drainage diversion – feasibility study. [USQ Project]

Sankowsky, Brendan (2009) Hydraulic conductivity response of soils to synthetic laundry greywater. [USQ Project]

Taylor, Benjamin Allan (2009) Improving accuracy of rainwater tank hydrologic yield estimation across Queensland. [USQ Project]

Wu, Chao di (2009) Investigate the best percentage by weight of glass powder, as fillers in phenolic resins by using tensile tests. [USQ Project]

Shears, Steven Edward (2009) Investigation of life cycle management of electromagnetic flow meters. [USQ Project]

Bichel, Mitchell Neil (2009) Investigation of the quality management system at Lockyer Valley Regional Council. [USQ Project]

McMahon, Craig Andrew (2009) Investigation of the quality of water treated by magnetic fields. [USQ Project]

Saunders, Michael Joseph (2009) Investigation of the relationship between experimental bridge piers and erosion within a flow. [USQ Project]

Taylor, Alan Owen (2009) Investigation on the fatigue behaviour of pultruded fibre composites. [USQ Project]

Porter, Hannah Elizabeth (2009) Involvement of older drivers at crashes at unsignalised and signalised intersections. [USQ Project]

Smith, Travis (2009) Ipswich City Council development assessment: streamlining the process. [USQ Project]

Taylor, Oliver John (2009) Market segmentation for improved efficiency of Ipswich water supply system. [USQ Project]

Dann, Jeffrey Michael (2009) Modernisation of an existing irrigation area. [USQ Project]

Yu, Yu Wah (2009) Pile driving analysis via dynamic loading test. [USQ Project]

Christensen, Zane Michael (2009) Reduction of local scour around bridge piers: combined system of aerofoil and slot. [USQ Project]

Armstrong, Andrew Jonathan (2009) Sealing works performance study. [USQ Project]

Summerville, Cameron (2009) Structural performance of low grade timber slabs. [USQ Project]

Baker, Philip James (2009) The 50 kph speed limit in residential Toowoomba. [USQ Project]

Rennie, Tristan James (2009) The effect of vandalism on fibre composite structures. [USQ Project]

Davis, Kieren Peter (2009) Application of an urban runoff model using surface specific parameters. [USQ Project]

Houghton, Richard (2009) Impact of tailings subsidence on rehabilitated landform erosional stability. [USQ Project]

Eckard, Lawrence Francois (2009) Setting up an engineering asset management system for a small local government council. [USQ Project]

Arnold, Matthew David (2008) A two-dimensional analysis of the bearing capacity of footings near slopes. [USQ Project]

Vincec, Paul Michael (2008) Feasibility study: into the design, effectiveness & limitations of installing raingardens within an inner urban environment. [USQ Project]

Watson, Joshua Francis (2008) Investigation of the bearing capacity of shallow footings located near slopes. [USQ Project]

Jesshope, Ashlee Elizabeth (2008) Bike tour plan for Toowoomba region. [USQ Project]

Shann, Blaise N. (2008) Variable rate bitumen spraying in road construction and resurfacing. [USQ Project]

Fraser, Mark John (2008) Analysis of a no-till toolbar for a two wheeled tractor. [USQ Project]

Boskovic, Selina (2008) Bioretention basin best practice design guidelines. [USQ Project]

Alanne, Glen (2008) Developing a model to predict water main failures. [USQ Project]

Donohue, Rachael Michelle (2008) Inspiring high precision dam water depth measurement with novel 'bubbler’ designs. [USQ Project]

Gibson, Duane Nikalia (2008) Interaction of recycled concrete and geogrid reinforcement material 14m high reinforced earth wall. [USQ Project]

Hardy, Glen (2008) Investigation into the performance of first flush systems for diesel engine based pollution on roof runoff. [USQ Project]

Walters, Kieren A. (2008) Investigation of construction practices and test procedures for road pavements on expansive subgrades. [USQ Project]

Huston, Thomas Clifford (2008) Investigation on the adequacy of disinfection in Toowoomba's water supply network. [USQ Project]

Rohde, Craig (2008) Preliminary water balance models of the Daly river catchment. [USQ Project]

Whiteford, Mark (2008) Relationship contracting in the mineral processing industry. [USQ Project]

Taylor, Timothy Noel (2008) Rural arterial road operating speed assessment. [USQ Project]

Goodall, Joshua Edward Allan (2008) The effect of the 50km/h implementation on local streets in Toowoomba. [USQ Project]

Drysdale, Dirk MacDonald (2008) The effectiveness of an aerofoil shaped pier reducing down stream vortices and turbulance. [USQ Project]

Waldock, David A. (2008) The maintenance of 'moment continuity' within structural concrete beam steps. [USQ Project]

Adams, Nicholas John (2008) The pedestrianisation of inner city Toowoomba. [USQ Project]

Ole, Zayne Kristian (2008) Track stability and buckling - rail stress management. [USQ Project]

Shellshear, Michael Stuart (2008) Urban stormwater treatment using chitosan. [USQ Project]

Watt, Andrew Thomas (2008) Validation of cooling grid model and testing of alternatives. [USQ Project]

H'ng, Po Lyn (2007) Comparative study of engineering leadership of senior engineers in Malaysia & Australia within the construction industry. [USQ Project]

O'May, David Victor (2007) A study of pavement performance on the Gatton Bypass Duplication. [USQ Project]

Wong Wan Sie, Winxie (2007) Analysis and design of curtain wall systems for high rise buildings. [USQ Project]

de Leeuw, Gert Johannes Schreuder (2007) Analysis of hydraulic transients in pipeline networks. [USQ Project]

Gallagher, Tony (2007) Clear zones in urban environments. [USQ Project]

Weis, Paul Raymond (2007) Cost effectiveness of street lighting. [USQ Project]

Schuh, Stephen Andrew (2007) Estimating rippability of Brisbane Tuff using quantitative and qualitative characteristics and a modified approach to an existing rippability rating method. [USQ Project]

Clarke, Lauren Elizabeth (2007) Factors in the selection of contractors for engineering works. [USQ Project]

Martin, Christopher (2007) Ipswich City Council water supply infrastructure capacity high water usage and water meter accuracy. [USQ Project]

Muller, Ben (2007) Irrigation performance and water use efficiency of turf production. [USQ Project]

Ong, Chin How (2007) Life cycle assessment of cement in Malaysia. [USQ Project]

Wei, Lay Kian (2007) Life cycle assessment of CSR autoclaves lightweight concrete production in Malaysia. [USQ Project]

Chamberlain, Michael (2007) Optimisation of Gold Coast City’s chlorine dosing system for the southern region distribution network. [USQ Project]

Saunders, Joseph Ian (2007) Porous weirs for flood mitigation. [USQ Project]

Muir, Paul John (2007) Siphons as furrow irrigation measurement devices. [USQ Project]

Green, Christopher Ross (2007) Testing and analysis of fibre composite beams in a bridge structure. [USQ Project]

Dugdell, David Thomas (2007) Toowoomba road network review. [USQ Project]

Kwok, Keen Whale (2007) Understanding progressive collapse and its effect to structural design. [USQ Project]

Harvey, Warren John (2007) Bridge approach guardrail prioritisation. [USQ Project]

Looi Zi Qing, Sean (2007) Improving the performance of an industrial cold room. [USQ Project]

Weatherley, Mark Geoffrey (2007) The effect of compaction on the design life of rehabilitated insitu cement powder stabilised pavements. [USQ Project]

Heron, Katherine Margaret Monica (2007) Vortex shedding on bridge piers. [USQ Project]

Sharp, Clayton Anthony (2006) Investigation of Toowoomba intersection crashes. [USQ Project]

Hughes, Neil (2006) Accuracy of volumes from MX(moss) design software. [USQ Project]

Hooper, James Andrew (2006) Analysis of catchment G in Oakey's sewer network. [USQ Project]

Jacobs, Sunny (2006) Comparison of life cycle energy consumption of alternative irrigation systems. [USQ Project]

Millikan, Toby (2006) Current and future capacity of the Wirraglen Scout Reserve Wetlands to improve urban stormwater quality at Highfields. [USQ Project]

Jiankulprasert, Manop (2006) Developing physical model for bearing capacity and flow net applications. [USQ Project]

Gunton, Michael J. (2006) Development of an asset management strategy for the city of Mandurah WA. [USQ Project]

Govender, Gansen (2006) Driver fatigue issues on State Highway 1 south of Whangarei - within region 1 of New Zealand. [USQ Project]

Bartlett, Jeremy Adam (2006) Establishment of a priority infrastructure plan for the major road network in Laidley Shire. [USQ Project]

Klein, Lindsay Edward (2006) Finite element analysis of a composite bridge deck. [USQ Project]

Eastaugh, Christopher S. (2006) Forest road decommissioning: modelling the effect on hydrological connectivity. [USQ Project]

Tierney, Daniel Robert (2006) Freight transport following an extreme rainfall event. [USQ Project]

Seiler, Emile (2006) Investigating the economic viability and methods of harvesting and storing Leucaena. [USQ Project]

Walker, Craig Louis (2006) Local and post-local buckling of steel tubes in thin-walled circular concrete-filed steel tubular columns. [USQ Project]

Allen, Glen Keith (2006) Problems of stone mastic asphalt use in north Queensland. [USQ Project]

Morris, Anthony Brian (2006) Stormwater harvest and reuse for a wholesale nursery. [USQ Project]

Bolger, Paul (2006) Strengthening of headstocks with vertical clamping to enhance shear capacity. [USQ Project]

Neubauer, Aaron John (2006) Testing of current flooring systems and materials. [USQ Project]

Breust, Tristan David (2006) The design and structural analysis of a steel portal framed shed for the Darling Downs Historical Rail Society. [USQ Project]

Chiu, Kwong Man Karen (2006) The use of recycled concrete aggregate in structural concrete around South East Queensland. [USQ Project]

Johnston, Kristine Leigh (2006) Treatment of mine water with colloidal suspensions. [USQ Project]

Kronk, Matthew Neil (2006) Ultimate strength of steel-concrete composite beams under combined bending and torsion. [USQ Project]

Figg, Matthew Lorne (2006) Using renewable plantation timber as a replacement option for unrenewable hardwood girders in bridges. [USQ Project]

Downey, Kym Therese (2006) Weather induced changes on domestic water consumption. [USQ Project]

Lau, Chi Hing (2006) Construction technology for high rise buildings in Hong Kong. [USQ Project]

Luke, Ricky (2006) Cost effectiveness of suburban street lighting. [USQ Project]

Sekhesa, Calvin Cally (2006) Development of a tool for estimating net emissions of greenhouse gases at farm and sub-catchment level. [USQ Project]

Nelson-White, Greg (2006) Abandoned shafts study (Charters Towers): a spatial solution. [USQ Project]

Fowler, Jason (2006) Cost effectiveness of suburban street lighting. [USQ Project]

Tucker, Neil John (2006) Evaluation of the Queensland streets concept in residential streets in Logan City. [USQ Project]

Scobie, Michael (2006) Sensitivity of capacitance probes to soil cracks. [USQ Project]

Lee, Chang Long (2005) A study and evaluation on Seri Wawasan bridge in Putrajaya, Malaysia. [USQ Project]

Chan, Man Piu (2005) Analysis and modeling of grouting and its application in civil engineering. [USQ Project]

Prasser, Mark (2005) Durability of hybrid concrete-FRP bridge decks. [USQ Project]

Kannapiran, Ram Kumar M. (2005) A study and evaluation on SMART Project, Malaysia. [USQ Project]

Leow, Jia Hui (2005) A study of building foundations in Malaysia. [USQ Project]

Harber, Paul James (2005) Applicability of no-fines concrete as a road pavement. [USQ Project]

Wilson, Maree (2005) Applications of geospatial information technology for fire risk assessment and management in NSW. [USQ Project]

Babin, Robyn E. (2005) Assessment of factors influencing water reuse opportunities in Western Australia. [USQ Project]

Mak, Chi Keung (2005) Benefit of partnering in the Hong Kong construction industry. [USQ Project]

Gravatt, Manu Richard (2005) Burdekin Falls Dam: investigation of the structural integrity of the outlet works radial gate and fixed wheel gate under emergency closure situations. [USQ Project]

Garrard, Brian John (2005) Comparison of moisture density relationship tests in civil engineering materials. [USQ Project]

Kong, Mun Kai (2005) Control of early thermal cracking of raft foundation by using slagcrete portland blast-furnace cement (PBFC). [USQ Project]

Schultz, Justin (2005) Design and development of a prototype, small plot research harvesting system. [USQ Project]

Gounder, Sangeevam (2005) Design of steel structures under fire. [USQ Project]

Al-Busaidi, Ibrahim A. (2005) Economics of photovoltaic water pumping system in Sultanate of Oman. [USQ Project]

Luther, Steven (2005) Effect of existing cracks in shear strengthening of concrete girders with external post tensioning. [USQ Project]

Whittaker, Todd (2005) Effect of existing cracks in shear strengthening of concrete girders with external post-tensioning. [USQ Project]

Sivongxay, Amphone (2005) Hydraulic properties of Toowoomba soils for laundry water reuse. [USQ Project]

Davis, Shawn Wayne (2005) Investigation of the flexural strengthening of concrete beams using external prestressing. [USQ Project]

Le, Minh N. (2005) Investigation on reuse potential of laundry water for household garden irrigation in Toowoomba. [USQ Project]

Harrison, Rodney James (2005) Modelling Tamworth regional council stormwater network. [USQ Project]

Anderson, Troy Dennis (2005) Prioritisation of guard rail remediation works. [USQ Project]

Crouch, Glen (2005) Rationalisation of wastewater treatment plants in Launceston. [USQ Project]

Chan, Lai Kuan (2005) Reduction of nitrogen oxides (NOx) using liquefied petroleum gas (LPG) in spark ignition (SI) engine. [USQ Project]

Lim, Chuan Jye (2005) Relationship contracting in Malaysia. [USQ Project]

Welsh, Trevor James (2005) Reverse osmosis water purification unit: for government and non-government use in disaster relief. [USQ Project]

Choi, Richard Fun Yiu (2005) Review of the jet grouting method. [USQ Project]

Harrison, Elissa Louise (2005) Road stabilisation issues in southern district of the Department of Main Roads, Queensland. [USQ Project]

Pillay, Ravindra Sen (2005) Short-term water demand forecasting for production optimisation. [USQ Project]

Willmott, Peter (2005) Stabilisation of Goulburn Valley soils for the improvement of subgrades in new low traffic pavement construction. [USQ Project]

McDonald, Scott (2005) The behaviour of hybrid fiber composite beams. [USQ Project]

Law, Bee Bee (2005) The usage of domestic water filtration systems in Malaysia. [USQ Project]

Earl, David (2005) To determine if there is a correlation between the shrink swell index and atterberg limits for soils within the Shepparton Formation. [USQ Project]

Moody, Bradley John (2005) Control and instrumentation for the USQ Formula SAE-A race car. [USQ Project]

Gordon, Craig (2005) Determination of insitu flexible moduli of modified pavement materials. [USQ Project]

Wiltshire, Mark (2005) Greywater reuse in urban areas. [USQ Project]

Teoh, Eang Aun (2005) Numerical modelling of complex slope using FLAC/SLOPE. [USQ Project]

Leong, Weng Wah (2005) The impact of trenching on urban road operation and maintenance. [USQ Project]

Lee, Richard Anthony (2005) Micrographs of the fracture of vinyl ester composites cured by microwaves. [USQ Project]

Elvy, Michelle Catherine (2004) Development of infiltration factors for the estimation of urban separate wastewater flow in the Gippsland water catchment. [USQ Project]

Ngo, Nelson, Shing Chai (2004) High-strength structural concrete with recycled aggregates. [USQ Project]

Young, Paul Edward (2004) Project management : a guide from start to finish for BHPBilliton Iron Ore Engineering Services Dept. Port Hedland. [USQ Project]

Cheong, Siew Hong (2004) Role of a project manager in a residential development housing development in Singapore - Analyse the use of bar code in tracking drawing during the construction of a residential development in Singapore. [USQ Project]

Wong, Chuan Mein (2004) Use of short fibres in structural concrete to enhance mechanical properties. [USQ Project]

Lau, Chau Chin (2004) A study on concrete faced rockfill dams. [USQ Project]

Coppen, John (2004) Advanced wastewater treatment systems. [USQ Project]

Darr, Shawn Geoffrey (2004) Assessment of crop health in relation to competition from weeds: using balloon-borne images and pectrometer data. [USQ Project]

Cheong, Fong Chin (2004) Effect of admixtures on the use of short fibres in structural concrete to enhance mechanical properties. [USQ Project]

Alam, Murshedul (2004) Effect of epoxy repairing on girders shear strengthened with external post tensioning. [USQ Project]

McKeering, Loretta M. (2004) Evaluating the potential to impose partial root zone drying (PRD) on clay soils in commercial cotton production systems. [USQ Project]

Mackenzie, Christopher Frank (2004) Evaluation of funding justification of low volume roads in North Queensland. [USQ Project]

Smith, Richard Boyd (2004) Forensic investigation of pavement failures. [USQ Project]

Jensen, Jason W. (2004) Influence of physical road characteristics on road crashes. [USQ Project]

Li, David (2004) Investigation of driver fatigue problems on the Oakey-Cooyar road. [USQ Project]

Orphant, Simon (2004) Life cycle assessment of the production of raw milk. [USQ Project]

Underhill, Richard (2004) Life cycle maintenance of low volume roads in the Alice Springs region. [USQ Project]

Tan, Kok Wei (2004) Motorcycle safety in Malaysia. [USQ Project]

Robertson, Jamie Andrew (2004) Optimising the operations of the Kanaka Drain floodgate. [USQ Project]

Heinrich, Nathan (2004) Prediction of feedlot effluent pond odour emission after significant inflow. [USQ Project]

Ruhle, Andrew John Alexander (2004) Redesign and analysis of Janke Bros. F500P parallelogram planting unit. [USQ Project]

Yap, Fui It (2004) Review of the current timber industry in Malaysia. [USQ Project]

Choo, Yeun Feong (2004) Seismic stability of slope. [USQ Project]

Woods, Evan Arthur (2004) Shear strengthening and model testing of concrete bridge headstocks. [USQ Project]

Jobling, Lindsay Peter (2004) Shear strengthening of headstocks using prestressed fibre strips. [USQ Project]

Ng, Chan Man (2004) Site formation works for Shek Mun development. [USQ Project]

Lusk, Benjamin Geoffrey (2004) Soil amendments to improve playability and reduce injury risks on sporting fields. [USQ Project]

Krinke, Mark James (2004) The effect of admixtures in concrete containing manufactured sand. [USQ Project]

Fraser, Timothy (2004) The use of industry by-products in the treatment of acid sulfate soils. [USQ Project]

Piper, A. G. (2004) Turf monitoring technology to aid in benchmarking and maintenance of sporting fields. [USQ Project]

Gitau, Samuel Kimani (2004) Use of road asset maintenance planning software in QDMR. [USQ Project]