Items where Year is 2005

Up a level
Export as [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors Name | Item Type | No Grouping
Jump to: A | B | C | D | E | F | G | H | J | K | L | M | N | O | P | Q | R | S | T | W | Y
Number of items: 118.

A

Airs, Leslie (2005) Mobile robot guidance and navigation. [USQ Project]

Al-Busaidi, Ibrahim A. (2005) Economics of photovoltaic water pumping system in Sultanate of Oman. [USQ Project]

Ali, Noorahmad Bin (2005) Corrosion in the boiler tubes of the Tuas South Incineration Plant, Singapore. [USQ Project]

Anderson, Troy Dennis (2005) Prioritisation of guard rail remediation works. [USQ Project]

B

Babin, Robyn E. (2005) Assessment of factors influencing water reuse opportunities in Western Australia. [USQ Project]

Banham, Heather C. (2005) Organisational change in small and medium sized enterprises - a regional study. Doctorate (other than PhD) thesis, University of Southern Queensland. (Unpublished)

Behrend, Frank D. (2005) The socio-cultural challenge of effective knowledge management in virtual project environments. Doctorate (other than PhD) thesis, University of Southern Queensland. (Unpublished)

Brown, Simon Neil (2005) Embedded IP for small devices. [USQ Project]

C

Campbell, Nicholas (2005) Analysing the effect of speed variation on irrigation efficiency in travelling irrigators. [USQ Project]

Chan, Lai Kuan (2005) Reduction of nitrogen oxides (NOx) using liquefied petroleum gas (LPG) in spark ignition (SI) engine. [USQ Project]

Chan, Man Piu (2005) Analysis and modeling of grouting and its application in civil engineering. [USQ Project]

Chan, Teck Wai Alan (2005) Computational fluid dynamics (CFD): investigation for improving pigs' housing design. [USQ Project]

Chia, Wee Chong (2005) Research and development of multi purpose carbide end mill. [USQ Project]

Choi, Richard Fun Yiu (2005) Review of the jet grouting method. [USQ Project]

Chong, Chuen Kiong Frederick (2005) Vehicle undercarriage scanning system. [USQ Project]

Chuah, Yew Pin (2005) Evolutionary structural optimization for multi component structural systems. [USQ Project]

Clague, Stephen John (2005) Investigation of relationships between skid resistant deficient pavement and aggregate by GIS and statistical analysis. [USQ Project]

Costa, Michael (2005) In-vehicle display system. [USQ Project]

Crouch, Glen (2005) Rationalisation of wastewater treatment plants in Launceston. [USQ Project]

D

Das Gupta, Jishu (2005) Performance issues for VOIP in access networks. Coursework Masters thesis, University of Southern Queensland. (Unpublished)

Davis, Shawn Wayne (2005) Investigation of the flexural strengthening of concrete beams using external prestressing. [USQ Project]

Dawson, Kim Maree (2005) Modelling load balance type static var compensator control system response. [USQ Project]

Deith, Peter (2005) Instrumentation to track the southern elephant seal. [USQ Project]

Domrow, Ryan (2005) Development of a mechanical testing system to investigate road deformation. [USQ Project]

Dyke, Geoffrey Wayne (2005) Optimising condenser air extraction to reduce greenhouse gas emissions at the Loy Yang B power station. [USQ Project]

E

Eagle, Michael Allan (2005) Numerical investigation of the thermal efficiency of glass refrigeration doors. [USQ Project]

Earl, David (2005) To determine if there is a correlation between the shrink swell index and atterberg limits for soils within the Shepparton Formation. [USQ Project]

F

Falken, Jason (2005) Critical review of techniques for rigid spoolpiece metrology observation and reduction. [USQ Project]

Farmer, Belinda (2005) Video compression using ITU-T recommendation H.264. [USQ Project]

Fenwick, Wayne (2005) Evaluation of control for the adjustment of the digital cadastral data base (DCDB). [USQ Project]

Field, Benjamin J. (2005) Stress analysis of axially loaded perforated steel plates by experimental and finite element methods. [USQ Project]

French, Vivienne Joyce (2005) The investigation into modes of failure of total hip replacements. [USQ Project]

G

Garget, Dennis (2005) Testing of robotic total stations for dynamic tracking. [USQ Project]

Garrard, Brian John (2005) Comparison of moisture density relationship tests in civil engineering materials. [USQ Project]

Gillies, Ross Donald (2005) Investigation into the non-invasive monitoring of blood glucose levels in people with diabetes. [USQ Project]

Gordon, Craig (2005) Determination of insitu flexible moduli of modified pavement materials. [USQ Project]

Gounder, Sangeevam (2005) Design of steel structures under fire. [USQ Project]

Grant, Robert Kenneth (2005) A study of the ground and vegetation effects on the propagation of road traffic noise in south east Queensland. [USQ Project]

Gravatt, Manu Richard (2005) Burdekin Falls Dam: investigation of the structural integrity of the outlet works radial gate and fixed wheel gate under emergency closure situations. [USQ Project]

Gwynne, Aeolyn (2005) Cloud detection system for the Mt Kent observatory. [USQ Project]

H

Harber, Matthew (2005) Development of a drivetrain system for a formula SAE-A race car. [USQ Project]

Harber, Paul James (2005) Applicability of no-fines concrete as a road pavement. [USQ Project]

Harrison, Elissa Louise (2005) Road stabilisation issues in southern district of the Department of Main Roads, Queensland. [USQ Project]

Harrison, Rodney James (2005) Modelling Tamworth regional council stormwater network. [USQ Project]

Heit, Jamie (2005) Quality assurance for virtual reference stations. [USQ Project]

Hever, James A. ORCID: https://orcid.org/0000-0002-3933-4062 (2005) How does a city law firm deal with leadership development? Doctorate (other than PhD) thesis, University of Southern Queensland. (Unpublished)

Hikwama, Baipaki Pakson (2005) Life cycle assessment of a personal computer. [USQ Project]

Ho, Khoon Chy Randal (2005) Balancing wheeled robot. [USQ Project]

J

Jacobs, Peter Gregory (2005) Assessing RTK GPS for a suburban survey practice. [USQ Project]

Janke, Scott (2005) Analysis of a sheet metal bucket elevator head. [USQ Project]

Jin, Tao (2005) GIS for house hunters: a case study in Toowoomba. [USQ Project]

K

Kamali, Khalid (2005) Fractal video compression. [USQ Project]

Kannapiran, Ram Kumar M. (2005) A study and evaluation on SMART Project, Malaysia. [USQ Project]

Khan, Nizam (2005) Multimedia database search techniques. [USQ Project]

Knox, Soz Deja (2005) The autonomous unmanned aerial surveillance vehicle navigation and user interface. [USQ Project]

Kong, Chan Nam (2005) Outsourcing total plant maintenance in Singapore petrochemical industry:a critical perspective. Doctorate (other than PhD) thesis, University of Southern Queensland. (Unpublished)

Kong, Mun Kai (2005) Control of early thermal cracking of raft foundation by using slagcrete portland blast-furnace cement (PBFC). [USQ Project]

L

Law, Bee Bee (2005) The usage of domestic water filtration systems in Malaysia. [USQ Project]

Law, Boon Lee (2005) Develop a system to monitor, analyse and report health data captured during exercise. [USQ Project]

Le, Minh N. (2005) Investigation on reuse potential of laundry water for household garden irrigation in Toowoomba. [USQ Project]

Lee, Chang Long (2005) A study and evaluation on Seri Wawasan bridge in Putrajaya, Malaysia. [USQ Project]

Lee, Kwan Shing (2005) Fracture analysis of vinyl ester composites under microwave condition. [USQ Project]

Lee, Richard Anthony (2005) Micrographs of the fracture of vinyl ester composites cured by microwaves. [USQ Project]

Leong, Weng Wah (2005) The impact of trenching on urban road operation and maintenance. [USQ Project]

Leow, Jia Hui (2005) A study of building foundations in Malaysia. [USQ Project]

Lim, Chuan Jye (2005) Relationship contracting in Malaysia. [USQ Project]

Lim, Chun Hao (2005) Replacement of chiller system of a terminal building. [USQ Project]

Lim, Doou Gie (2005) Design and development of a conveyor system for semiconductor industry. [USQ Project]

Littleton, Craig Andrew (2005) Autonomous unmanned aerial surveillance vehicle - autonomous control and flight dynamics. [USQ Project]

Lorterapong, Atasit (2005) Factors influencing consumer intentions to purchase seasonally discounted Reebok athletic footwear. Doctorate (other than PhD) thesis, University of Southern Queensland. (Unpublished)

Luckemeyer, Nils (2005) Assisted standing and walking mode for Robug IV eight legged robot. [USQ Project]

Luther, Steven (2005) Effect of existing cracks in shear strengthening of concrete girders with external post tensioning. [USQ Project]

Lynch, Jason Michael (2005) An internet based SCADA system. [USQ Project]

M

Mak, Chi Keung (2005) Benefit of partnering in the Hong Kong construction industry. [USQ Project]

Makuyana, Nyasha David (2005) Economic structural adjustment programs (ESAP) in Zimbabwe, 1990-2000. Would alternative policies have been more successful? Honours thesis, University of Southern Queensland. (Unpublished)

Maseko, Mfana Elphus (2005) Restitution of land for agricultural development Ehlanzeni region Mpumalanga. [USQ Project]

McDonald, Scott (2005) The behaviour of hybrid fiber composite beams. [USQ Project]

McGovern, Mark (2005) Spatial analysis of Tasmanian Devil facial tumour disease. [USQ Project]

Miletic, Alista (2005) Current controller for inverter bridge designed for grid-connected photovoltaic system. [USQ Project]

Mohamed Ibrahim, Saifudin Bin (2005) The PID controller design using genetic algorithm. [USQ Project]

Molloy, Reuben (2005) Electronic systems for the USQ formula SAE racer. [USQ Project]

Moody, Bradley John (2005) Control and instrumentation for the USQ Formula SAE-A race car. [USQ Project]

N

Ng, Hai Ching (2005) Investigation of tenable carbon monoxide and visibility level for a fired room. [USQ Project]

O

O'Neil, Anthony M. (2005) Chassis design for SAE racer. [USQ Project]

Ong, Gimhua (2005) Software development for power system analysis. [USQ Project]

Ong, Willy (2005) Remote monitoring and instrumentation for Mount Kent Observatory. [USQ Project]

Outschoorn, Jeremy Paul (2005) Computational fluid mechanics investigation of ventilation aboard a livestock vessel. [USQ Project]

P

Peach, Neil (2005) An exploratory analysis into measuring business contributions to sustainable development in Australia. Doctorate (other than PhD) thesis, University of Southern Queensland. (Unpublished)

Pena, Mario de la (2005) Historical identification and mapping. [USQ Project]

Pillay, Ravindra Sen (2005) Short-term water demand forecasting for production optimisation. [USQ Project]

Plank, Melinda (2005) Engine optimisation and performance characteristics for a formula SAE race car. [USQ Project]

Popa, Cristina Elena (2005) Steering system and suspension design for 2005 formula SAE-A car. [USQ Project]

Prasser, Mark (2005) Durability of hybrid concrete-FRP bridge decks. [USQ Project]

Q

Quarisa, Matthew (2005) An inexpensive hardware-based identification system for improved computer security. [USQ Project]

R

Rizzo Naudi, Antonello (2005) A quality assurance system at the Land Survey and Mapping Unit (Malta). [USQ Project]

S

Schultz, Justin (2005) Design and development of a prototype, small plot research harvesting system. [USQ Project]

Sivongxay, Amphone (2005) Hydraulic properties of Toowoomba soils for laundry water reuse. [USQ Project]

Stimela, David Master (2005) Developing a methodology using multi spectral remote sensing data for mapping vegetation change - a key variable in soil erosion mapping. [USQ Project]

Struthers, Craig (2005) Real-time monitoring and control of a pressure control system. [USQ Project]

T

Tan, Kevin Chin Ning (2005) Life cycle assessment of a mobile phone. [USQ Project]

Tanoi, Levei (2005) A model to establish a global navigation satellite system (GNSS) testing and validation center at the University of Southern Queensland. [USQ Project]

Teo, Chin Teng (2005) Lifting mechanism of wheelchair. [USQ Project]

Teo, Kian Peng (2005) Electronics and the environment - Singapore perspective. [USQ Project]

Teoh, Eang Aun (2005) Numerical modelling of complex slope using FLAC/SLOPE. [USQ Project]

Thompson, Dean (2005) A four quadrant adjustable speed drive for series wound DC motors. [USQ Project]

Tozer, Paul (2005) Assessment of the feasibility of a terrestrial scanner in underground and surface mining at BHPB Cannington mine. [USQ Project]

Trent, Stephen Wade (2005) A habitat suitability index model for the trapdoor spider species, 'Arbanitis variabilis'. [USQ Project]

W

Welsh, Trevor James (2005) Reverse osmosis water purification unit: for government and non-government use in disaster relief. [USQ Project]

Whittaker, Todd (2005) Effect of existing cracks in shear strengthening of concrete girders with external post-tensioning. [USQ Project]

Willmott, Peter (2005) Stabilisation of Goulburn Valley soils for the improvement of subgrades in new low traffic pavement construction. [USQ Project]

Wilson, David Orme (2005) The resolution of uncertain boundaries at Amity Point (North Stradbroke Island). [USQ Project]

Wilson, Hugh B. (2005) Defining the human security understanding and expectations of the Queensland Branch of the United Firefighters' Union in the context of Australia's burgeoning Asian free-trade ambitions. [USQ Project]

Wilson, Maree (2005) Applications of geospatial information technology for fire risk assessment and management in NSW. [USQ Project]

Wiltshire, Mark (2005) Greywater reuse in urban areas. [USQ Project]

Wong, Alan (2005) Using GIS to explore the relationship between road grade and accidents. [USQ Project]

Wong, Wei Loon (2005) Compressed natural gas as an alternative fuel in diesel engines. [USQ Project]

Woolf, Rodney J. (2005) Data mining using Matlab. [USQ Project]

Y

Yap, Lee Jiuan (2005) Evaluation of wet scrubber systems. [USQ Project]

This list was generated on Sun Apr 28 02:26:41 2024 AEST.