Items where Year is 2010

Alenazi, Saud Khlaif K. (2010) Analysis and taxonomy of network quality of service (QoS) concepts in the long term evolution/system architecture evolution (LTE/SAE) System. [USQ Project]

Assiriyage, Buddhi Nuwan Lanka (2010) An investigation of aluminium/eproxy particulate composite system - impact/long-term behavior. [USQ Project]

Bailey, Thomas Sullivan (2010) Environmentally friendly natural waste materials for use in civil structures. [USQ Project]

Bajracharya, Rohan Muni (2010) Structural evaluation of concrete-expanded polystyrene sandwich panels for slab applications. [USQ Project]

Baker, Stuart (2010) Induced draft (ID) fan lubrication system design review and proposed modification upgrade at Callide C Power Station. [USQ Project]

Barnett, Paul Jonathan (2010) Life cycle assessment (LCA) of liquefied natural gas (LNG) and its environmental impact as a low carbon energy source. [USQ Project]

Bishop, Damon Thomas (2010) Pump gland improvement project. [USQ Project]

Cameron, Kirsty (2010) Technical feasibility of a salinity trading scheme for the licensing of coal mine discharges in the Fitzroy Basin. [USQ Project]

Caudell, Clinton Frank (2010) Visualising traditional boundaries in Papua New Guinea using GIS 'zones of uncertainty'. [USQ Project]

Caunce, Catherine May (2010) Effective road pavement design for expansive soils in Ipswich. [USQ Project]

Clarke, Jason (2010) Analysis of data to develop models for spray combustion. [USQ Project]

Coe, Daniel (2010) Asset management for Tamworth Regional Council’s sewer network. [USQ Project]

Coggan, Robert Walter (2010) High impedance earth fault modelling. [USQ Project]

Commons-Fidge, Ian G. (2010) Grinding mill conceptual design developments. [USQ Project]

Cooper, Mark Dennis (2010) Improve waste recycling potential through the conversion of normal household waste into biogas. [USQ Project]

Cox, Jeremy Neil (2010) Advantages and practicality of using a 2D hydrodynamic model in comparison to a 1D hydrodynamic model in a flood prone area. [USQ Project]

Daly, James (2010) Design, construction and performance of buildings foundations on soft clays in the Brisbane region. [USQ Project]

Davies, Neil (2010) Pedestrian characteristics and control for the Toowoomba city centre master plan area. [USQ Project]

Day, Michael Peter (2010) The implications regional ecosystem mapping has on land development proposals in rural Queensland. [USQ Project]

Di Bella, Robert Michael (2010) Biogas generation from an anaerobic pond 'abattoir'. [USQ Project]

Donald, Michael Craig (2010) Comparative properties of epoxy/sawdust composites with palm oil cured by microwave and thermal treatment. [USQ Project]

Downing, Matthew (2010) Upon the construction of a remote controlled tracked reconnaissance vehicle. [USQ Project]

Duncan, Jeremy Bruce (2010) USB camera pedestrian counting. [USQ Project]

Elphinstone, Aaron Daniel (2010) Optimisation of pigging infrastructure in design. [USQ Project]

Fahey, Lawrence John (2010) Decision support system for assessing the benefits of incorporating swabbing facilities into water pipelines. [USQ Project]

Frazer, Peter (2010) Relational contracting – investigation of relational contracting behaviours across various project delivery models. [USQ Project]

Frischknecht, Sonja (2010) The experience of Australian Bachelor of Nursing students undertaking a clinically focused, service learning placement in the Solomon Islands. Honours thesis, University of Southern Queensland. (Unpublished)

Gelding, Peter William (2010) Prioritising locations for investment based on threats to reptiles and ecosystems within the Condamine Catchment. [USQ Project]

Gibbons, Anthony (2010) Development of a laser pointer mouse. [USQ Project]

Gibson, David Eric (2010) Evaluating comparative performance of various shaped bridge piers: experimental investigation of sediment transport and scouring. [USQ Project]

Gould, Adam Mark (2010) Finite volume solution of the unsteady free surface flow equations. [USQ Project]

Grygorcewicz, Jon-Paul Frederick (2010) Improvement of hydrocarbon dew point determination via gas chromatography. [USQ Project]

Haenke, Michael (2010) The development of a wind and solar power calculator for use within the private sector. [USQ Project]

Hagan, Gavin Raye (2010) Tubular Screw Conveyor Modelling. [USQ Project]

Hansen, Leigh (2010) Quantifying the reduction in hydraulic conductivity of disturbed soil columns as a function of the salinity and sodicity of applied water. [USQ Project]

Hanson, Scott (2010) Improvement and performance of pavement gravels used by Toowoomba Regional Council for unsealed roads. [USQ Project]

Harch, Brian Joseph Luke (2010) The investigation into the optimisation of cross laminated timber panels for use in the Australia building industry. [USQ Project]

Hicks, Ryan (2010) Developing Road Asset Management Systems Utilising Spatial Technologies. [USQ Project]

Huntley, Matthew Mark (2010) Mapping cycling pathways and route selection using GIS and GPS. [USQ Project]

Jones, Simon (2010) Stop-go mobile mapping. [USQ Project]

Jordan, Timothy J. (2010) Intrusion and anomaly detection in computer networks using signal processing approaches. [USQ Project]

Kennedy, Jotham Ariel (2010) Experimental investigation into the uplift capacity of ground anchors in sand. [USQ Project]

Kiongoli, Said (2010) Testing the accuracy of machine guidance in road construction. [USQ Project]

Kirkland, Rhys (2010) The development of a small scale gas turbine to assist in the analysis of coal seam gas as an alternative stationary jet fuel for Australia. [USQ Project]

Klibbe, Christopher Aaron (2010) An investigation on the high water mark as a land boundary. [USQ Project]

Lewers, Glyn Alan (2010) Design of a frame/structure for a large wastewater treatment pond. [USQ Project]

Madden-Holmes, Ben (2010) An investigation into the legislative changes affecting tidal boundaries in Queensland. [USQ Project]

Magarry, Anthony John (2010) Management of physical assets – advanced asset management planning. [USQ Project]

Malvern, Jerome Liam (2010) Investigation of high impact capacity composite material for civil infrastructure. [USQ Project]

Marstella, Joseph Edward (2010) The concept, analysis and critical thinking involved in flow net theory - a project based learning approach using cofferdams. [USQ Project]

Martin, Joseph A. (2010) Driving problems encountered in the UAE by newly arrived expatriates and tourists. [USQ Project]

Miller, Justin (2010) Design of a wireless acquisition system for a digital stethoscope. [USQ Project]

Millers, Paul Gordon (2010) The effects of small distributed generation on the electrical distribution network. [USQ Project]

Moffatt, Samuel Alexander (2010) Access control in semantic information systems. Coursework Masters thesis, University of Southern Queensland. (Unpublished)

Morrison, Scott James (2010) The development and testing of a high precision ellipsoidal - Australian height datum deformation grid for real time GPS applications. [USQ Project]

Mowat, David (2010) Callide C Power Station's generator protection system 'ride through capabilities' for various external faults. [USQ Project]

Muller, Zach Anthony (2010) Investigation of solar thermal energy alternatives and their applications to water heating and air cooling in the meat processing industry. [USQ Project]

NG, Benjamin Woon Soon (2010) Grid-Connected Solar Photovoltaic System. [USQ Project]

Nawratzki, Guy (2010) Suspension development for a short circuit racing car. [USQ Project]

Palmer, Matthew Alan (2010) Analysis of the feasibility of a 3D model for use in civil construction (creating a 3D model for the first span of a bridge). [USQ Project]

Perry, Ramon (2010) Design of a small wind turbine for a rural community in Australia. [USQ Project]

Philips, Cameron Charles MacGregor (2010) Gladstone Power Station demineralised water plant asset strategy development. [USQ Project]

Piok, Dhieu Magot (2010) Remotely accessible 35 kVA diesel backup generator. [USQ Project]

Pola, Nigel Peter (2010) Synthesis of modified phenolic resins using renewable materials for advanced composites in civil engineering structures. [USQ Project]

Priebbenow, Paul (2010) Investigation of the Methods of Testing Lead-Acid Battery Health by means of Discharge and Impedance Testing. [USQ Project]

Pufelski, Nadine (2010) How effective is microalgae treatment of different wastewaters for simultaneous nutrient removal and lipid production for bio-fuel? [USQ Project]

Reimers, Anthony Steven (2010) Design and Manufacture of a Mechanical Fatigue Testing Machine. [USQ Project]

Rowlings, David Selwyn (2010) An experimental and theoretical investigation of side weirs. [USQ Project]

Salomon, Jake (2010) The design and construction of an exercise device for use in physiotherapy of the arm. [USQ Project]

Seccombe, Andrew James (2010) The use of Fibre Bragg Grating (FBG) sensors in geotechnical applications. [USQ Project]

Shaw, Mark Andrew (2010) An investigation of roles and development pattern of regional airports, Queensland Australia. [USQ Project]

Skipworth, Julian (2010) An investigation and quantitative analysis of the impacts on stream flow and fluvial erosion associated with urbanisation of a small catchment. [USQ Project]

Slack–Smith, David (2010) Structural design, quotation and production support using parametric CAD tools and national/international standards for fluid storage systems. [USQ Project]

Smith, B. (2010) A biomechanical analysis for improved ergonomics in metal detector products using trajectory optimisation. [USQ Project]

Stanley, Matthew (2010) An investigation into the Australian height datum on Ballina Island. [USQ Project]

Stanton, Dale John (2010) Atterberg limits and their relationship to longitudinal cracking in granular pavements. [USQ Project]

Stuart, Lynne (2010) What are the experiences of Indigenous health workers enrolled in the Bachelor of Nursing at the University of Southern Queensland. Honours thesis, University of Southern Queensland. (Unpublished)

Tai, Ping (2010) Dielectric, thermal and mechanical properties of sawdust reinforced epoxy composites post-cured in microwaves. [USQ Project]

Thomas, Benjamin Brett (2010) Development of a tournament management system. [USQ Project]

Turner, Alan (2010) Structural performance of cross laminated timber panels as walls. [USQ Project]

Turner, Roland James (2010) Design of a Small Wind Turbine for a Rural Pumping Application. [USQ Project]

Walker, Cameron (2010) Automated soil compaction machine for the preparation of Califorian bearing ratio and proctor specimens. [USQ Project]

Walter, Nathan Johan (2010) Development of a bridge asset management plan for Southern Downs Regional Council. [USQ Project]

Weyman-Jones, Ashley (2010) An investigation into the accuracy and limitations of automatic target recognition in total stations. [USQ Project]

Wilson, Bede (2010) Development of an unmanned aerial vehicle for use during disaster situations. [USQ Project]

Zanetti, Ashley (2010) Investigation of pavement design for low volume rural roads. [USQ Project]