Items where Year is 2010

A

Alenazi, Saud Khlaif K. (2010) Analysis and taxonomy of network quality of service (QoS) concepts in the long term evolution/system architecture evolution (LTE/SAE) System. [USQ Project]

Assiriyage, Buddhi Nuwan Lanka (2010) An investigation of aluminium/eproxy particulate composite system - impact/long-term behavior. [USQ Project]

B

Bailey, Thomas Sullivan (2010) Environmentally friendly natural waste materials for use in civil structures. [USQ Project]

Bajracharya, Rohan Muni (2010) Structural evaluation of concrete-expanded polystyrene sandwich panels for slab applications. [USQ Project]

Baker, Stuart (2010) Induced draft (ID) fan lubrication system design review and proposed modification upgrade at Callide C Power Station. [USQ Project]

Barnett, Paul Jonathan (2010) Life cycle assessment (LCA) of liquefied natural gas (LNG) and its environmental impact as a low carbon energy source. [USQ Project]

Bishop, Damon Thomas (2010) Pump gland improvement project. [USQ Project]

C

Cameron, Kirsty (2010) Technical feasibility of a salinity trading scheme for the licensing of coal mine discharges in the Fitzroy Basin. [USQ Project]

Caudell, Clinton Frank (2010) Visualising traditional boundaries in Papua New Guinea using GIS 'zones of uncertainty'. [USQ Project]

Caunce, Catherine May (2010) Effective road pavement design for expansive soils in Ipswich. [USQ Project]

Clarke, Jason (2010) Analysis of data to develop models for spray combustion. [USQ Project]

Coe, Daniel (2010) Asset management for Tamworth Regional Council’s sewer network. [USQ Project]

Coggan, Robert Walter (2010) High impedance earth fault modelling. [USQ Project]

Commons-Fidge, Ian G. (2010) Grinding mill conceptual design developments. [USQ Project]

Cooper, Mark Dennis (2010) Improve waste recycling potential through the conversion of normal household waste into biogas. [USQ Project]

Cox, Jeremy Neil (2010) Advantages and practicality of using a 2D hydrodynamic model in comparison to a 1D hydrodynamic model in a flood prone area. [USQ Project]

D

Daly, James (2010) Design, construction and performance of buildings foundations on soft clays in the Brisbane region. [USQ Project]

Davies, Neil (2010) Pedestrian characteristics and control for the Toowoomba city centre master plan area. [USQ Project]

Day, Michael Peter (2010) The implications regional ecosystem mapping has on land development proposals in rural Queensland. [USQ Project]

Di Bella, Robert Michael (2010) Biogas generation from an anaerobic pond 'abattoir'. [USQ Project]

Donald, Michael Craig (2010) Comparative properties of epoxy/sawdust composites with palm oil cured by microwave and thermal treatment. [USQ Project]

Downing, Matthew (2010) Upon the construction of a remote controlled tracked reconnaissance vehicle. [USQ Project]

Duncan, Jeremy Bruce (2010) USB camera pedestrian counting. [USQ Project]

E

Elphinstone, Aaron Daniel (2010) Optimisation of pigging infrastructure in design. [USQ Project]

F

Fahey, Lawrence John (2010) Decision support system for assessing the benefits of incorporating swabbing facilities into water pipelines. [USQ Project]

Frazer, Peter (2010) Relational contracting – investigation of relational contracting behaviours across various project delivery models. [USQ Project]

Frischknecht, Sonja (2010) The experience of Australian Bachelor of Nursing students undertaking a clinically focused, service learning placement in the Solomon Islands. Honours thesis, University of Southern Queensland. (Unpublished)

G

Gelding, Peter William (2010) Prioritising locations for investment based on threats to reptiles and ecosystems within the Condamine Catchment. [USQ Project]

Gibbons, Anthony (2010) Development of a laser pointer mouse. [USQ Project]

Gibson, David Eric (2010) Evaluating comparative performance of various shaped bridge piers: experimental investigation of sediment transport and scouring. [USQ Project]

Gould, Adam Mark (2010) Finite volume solution of the unsteady free surface flow equations. [USQ Project]

Grygorcewicz, Jon-Paul Frederick (2010) Improvement of hydrocarbon dew point determination via gas chromatography. [USQ Project]

H

Haenke, Michael (2010) The development of a wind and solar power calculator for use within the private sector. [USQ Project]

Hagan, Gavin Raye (2010) Tubular Screw Conveyor Modelling. [USQ Project]

Hansen, Leigh (2010) Quantifying the reduction in hydraulic conductivity of disturbed soil columns as a function of the salinity and sodicity of applied water. [USQ Project]

Hanson, Scott (2010) Improvement and performance of pavement gravels used by Toowoomba Regional Council for unsealed roads. [USQ Project]

Harch, Brian Joseph Luke (2010) The investigation into the optimisation of cross laminated timber panels for use in the Australia building industry. [USQ Project]

Hicks, Ryan (2010) Developing Road Asset Management Systems Utilising Spatial Technologies. [USQ Project]

Huntley, Matthew Mark (2010) Mapping cycling pathways and route selection using GIS and GPS. [USQ Project]

J

Jones, Simon (2010) Stop-go mobile mapping. [USQ Project]

Jordan, Timothy J. (2010) Intrusion and anomaly detection in computer networks using signal processing approaches. [USQ Project]

K

Kennedy, Jotham Ariel (2010) Experimental investigation into the uplift capacity of ground anchors in sand. [USQ Project]

Kiongoli, Said (2010) Testing the accuracy of machine guidance in road construction. [USQ Project]

Kirkland, Rhys (2010) The development of a small scale gas turbine to assist in the analysis of coal seam gas as an alternative stationary jet fuel for Australia. [USQ Project]

Klibbe, Christopher Aaron (2010) An investigation on the high water mark as a land boundary. [USQ Project]

L

Lewers, Glyn Alan (2010) Design of a frame/structure for a large wastewater treatment pond. [USQ Project]

M

Madden-Holmes, Ben (2010) An investigation into the legislative changes affecting tidal boundaries in Queensland. [USQ Project]

Magarry, Anthony John (2010) Management of physical assets – advanced asset management planning. [USQ Project]

Malvern, Jerome Liam (2010) Investigation of high impact capacity composite material for civil infrastructure. [USQ Project]

Marstella, Joseph Edward (2010) The concept, analysis and critical thinking involved in flow net theory - a project based learning approach using cofferdams. [USQ Project]

Martin, Joseph A. (2010) Driving problems encountered in the UAE by newly arrived expatriates and tourists. [USQ Project]

Miller, Justin (2010) Design of a wireless acquisition system for a digital stethoscope. [USQ Project]

Millers, Paul Gordon (2010) The effects of small distributed generation on the electrical distribution network. [USQ Project]

Moffatt, Samuel Alexander (2010) Access control in semantic information systems. Coursework Masters thesis, University of Southern Queensland. (Unpublished)

Morrison, Scott James (2010) The development and testing of a high precision ellipsoidal - Australian height datum deformation grid for real time GPS applications. [USQ Project]

Mowat, David (2010) Callide C Power Station's generator protection system 'ride through capabilities' for various external faults. [USQ Project]

Muller, Zach Anthony (2010) Investigation of solar thermal energy alternatives and their applications to water heating and air cooling in the meat processing industry. [USQ Project]

N

NG, Benjamin Woon Soon (2010) Grid-Connected Solar Photovoltaic System. [USQ Project]

Nawratzki, Guy (2010) Suspension development for a short circuit racing car. [USQ Project]

P

Palmer, Matthew Alan (2010) Analysis of the feasibility of a 3D model for use in civil construction (creating a 3D model for the first span of a bridge). [USQ Project]

Perry, Ramon (2010) Design of a small wind turbine for a rural community in Australia. [USQ Project]

Philips, Cameron Charles MacGregor (2010) Gladstone Power Station demineralised water plant asset strategy development. [USQ Project]

Piok, Dhieu Magot (2010) Remotely accessible 35 kVA diesel backup generator. [USQ Project]

Pola, Nigel Peter (2010) Synthesis of modified phenolic resins using renewable materials for advanced composites in civil engineering structures. [USQ Project]

Priebbenow, Paul (2010) Investigation of the Methods of Testing Lead-Acid Battery Health by means of Discharge and Impedance Testing. [USQ Project]

Pufelski, Nadine (2010) How effective is microalgae treatment of different wastewaters for simultaneous nutrient removal and lipid production for bio-fuel? [USQ Project]

R

Reimers, Anthony Steven (2010) Design and Manufacture of a Mechanical Fatigue Testing Machine. [USQ Project]

Rowlings, David Selwyn (2010) An experimental and theoretical investigation of side weirs. [USQ Project]

S

Salomon, Jake (2010) The design and construction of an exercise device for use in physiotherapy of the arm. [USQ Project]

Seccombe, Andrew James (2010) The use of Fibre Bragg Grating (FBG) sensors in geotechnical applications. [USQ Project]

Shaw, Mark Andrew (2010) An investigation of roles and development pattern of regional airports, Queensland Australia. [USQ Project]

Skipworth, Julian (2010) An investigation and quantitative analysis of the impacts on stream flow and fluvial erosion associated with urbanisation of a small catchment. [USQ Project]

Slack–Smith, David (2010) Structural design, quotation and production support using parametric CAD tools and national/international standards for fluid storage systems. [USQ Project]

Smith, B. (2010) A biomechanical analysis for improved ergonomics in metal detector products using trajectory optimisation. [USQ Project]

Stanley, Matthew (2010) An investigation into the Australian height datum on Ballina Island. [USQ Project]

Stanton, Dale John (2010) Atterberg limits and their relationship to longitudinal cracking in granular pavements. [USQ Project]

Stuart, Lynne (2010) What are the experiences of Indigenous health workers enrolled in the Bachelor of Nursing at the University of Southern Queensland. Honours thesis, University of Southern Queensland. (Unpublished)

T

Tai, Ping (2010) Dielectric, thermal and mechanical properties of sawdust reinforced epoxy composites post-cured in microwaves. [USQ Project]

Thomas, Benjamin Brett (2010) Development of a tournament management system. [USQ Project]

Turner, Alan (2010) Structural performance of cross laminated timber panels as walls. [USQ Project]

Turner, Roland James (2010) Design of a Small Wind Turbine for a Rural Pumping Application. [USQ Project]

W

Walker, Cameron (2010) Automated soil compaction machine for the preparation of Califorian bearing ratio and proctor specimens. [USQ Project]

Walter, Nathan Johan (2010) Development of a bridge asset management plan for Southern Downs Regional Council. [USQ Project]

Weyman-Jones, Ashley (2010) An investigation into the accuracy and limitations of automatic target recognition in total stations. [USQ Project]

Wilson, Bede (2010) Development of an unmanned aerial vehicle for use during disaster situations. [USQ Project]

Z

Zanetti, Ashley (2010) Investigation of pavement design for low volume rural roads. [USQ Project]