Items where Year is 2011

A

Alexis, Jeremie (2011) Developing a home-based functional application for an EEG-based brain computer interface. [USQ Project]

Atem, Thiew (2011) The skid mounted substation. [USQ Project]

B

Bacor, Gerson (2011) Cloud-based network simulator for next generation wireless technology (WiMAX and LTE). Coursework Masters thesis, University of Southern Queensland. (Unpublished)

Bauer, Amelia (2011) Investigation into the biochemical methane potential of abattoir wastewater. [USQ Project]

Brookshaw, Iain (2011) Real time implementation of obstacle avoidance for an autonomous mobile robot using monocular computer vision. [USQ Project]

Brown, Steven (2011) Design of a high-shear geopolymer concrete mixer. [USQ Project]

Bruce, Thomas (2011) Investigation of cost and performance characteristic of photovoltaic panels. [USQ Project]

C

Case, Jiel (2011) Initial design of a high-performance and cost-effective mountain bike. [USQ Project]

Cox, Adam (2011) Stereo vision for webcams. [USQ Project]

Craig, Aston J. (2011) Investigation into a fleet bearing monitoring system. [USQ Project]

D

Dakin, Anthony (2011) Investigation of the suitability of finger jointed structural timber for use in nail plated roof trusses. [USQ Project]

Davydov, Alexey (2011) Investigation of the structural failure of plywood noise barriers. [USQ Project]

Delahunty, Bruce (2011) Elevated highways – a solution to Brisbane’s traffic congestion? [USQ Project]

Dudley, Samuel (2011) Stability of underground tunnelling using relaxation techniques. [USQ Project]

E

Evans, Darryl (2011) Prototype development for a procurement and electronic document management system. [USQ Project]

F

Farrington, Jock (2011) Redesign of an FSAE race car’s steering and suspension system. [USQ Project]

Fenn, Scott P. (2011) Investigation into relocatable home design and construction. [USQ Project]

Fichera, Anthony (2011) A practical comparison of VISSIM and SIDRA for the assessment of development impacts. [USQ Project]

Fitzgerald, Danial (2011) Managing the repair of transport infrastructure after a natural disaster. [USQ Project]

G

Graham, Kim (2011) Local government greenhouse gas abatement reporting. [USQ Project]

Gussen, Ben (2011) The Tower of Babel Syndrome: locality and governance in response to the ecological crisis. Honours thesis, University of Auckland, New Zealand . (Unpublished)

H

Harriman, Adam J. (2011) Smart Grid for tomorrow’s electricity distribution. [USQ Project]

Harrington, Daniel (2011) CSG water as a medium to grow marine microalgae for biofuel production. [USQ Project]

Heaton, Erin (2011) Use of vibration signature in structural health monitoring (composite/internal damages). [USQ Project]

Heit, Andrew (2011) An investigation into the parameters that affect the swell factor used in volume and design calculations at Callide open cut coal mine. [USQ Project]

Hockey, Josh (2011) Biometric analysis for remote examination system. [USQ Project]

K

Keleher, Matthew (2011) Analysis of high-speed rural traffic crashes within the South-West district of Toowoomba regional council. [USQ Project]

Kemp, Ryan (2011) Investigates the effect of surface shear on pavements near road intersection. [USQ Project]

Kilian, Simone (2011) Sugarcane bagasse reinforced thermoplastic composites. [USQ Project]

Kmita, Shane (2011) Echo cancellation in VoIP using digital adaptive filters. [USQ Project]

L

Ledger, Allen (2011) The development of a high precision terrestrial laser scanner calibration range at USQ. [USQ Project]

Lenton, Paul (2011) Use of near-infrared photogrammetry to determine crack and surface deformation in small structures. [USQ Project]

Leong, Ik Sung (2011) Broadband satellite internet service testing. [USQ Project]

M

Maher, Daniel (2011) Projection of computer design data onto digital photographs. [USQ Project]

Mandava, Jagan (2011) Mechanical behaviour of polymeric composition based on available natural fibres in Australia. [USQ Project]

Marion, Michael (2011) A comparison of AUSGeoid09 and AUSGeoid98 in the Hawkesbury Valley. [USQ Project]

Mautoga, Marau (2011) Fracture toughness of glass powder reinforced vinyl ester resin post cured in a conventional oven using flexural test. [USQ Project]

McDonald, Matthew (2011) Investigation into the limitation of measuring to 360 Degree prisms using automatic target recognition technology. [USQ Project]

McHugh, William (2011) Properties of nickel as a magnetostrictive material for ultrasonic conditions. [USQ Project]

Meredith, Tyronne (2011) Options for the replacement of aging bridges under local authority control in rural areas of Queensland. [USQ Project]

Millard, Aaron (2011) Property rights, cadastral boundaries & coastal erosion in New South Wales. [USQ Project]

Mohr, David (2011) Performance characterisation of pressure regulation devices used in broad-acre irrigation. [USQ Project]

Morris, Mike (2011) Implementation of electronic measurement and recording of strata title field notes. [USQ Project]

Motswagae, Tshepo (2011) A laboratory experiment based on the ‘Segway’. [USQ Project]

N

Nixon, Phillip (2011) Using sun observations to set an azimuth combining and comparing Automatic Target Recognition in a Total Station with GPS observed time and position. [USQ Project]

O

O'Keeffe, Andrew (2011) Behaviour of polymer concrete for infilling fibre composite tubes. [USQ Project]

Olm, David William Charles (2011) Management of road reconstruction and repair following a flooding disaster. [USQ Project]

P

Peauril, Joshua (2011) Recycling glass fibre composites – process and viability. [USQ Project]

Penman, Brian (2011) Calculation and comparison of the noise and latency of RTK observations using radio link and NTRIP. [USQ Project]

Peters, Renee (2011) Advanced analysis of shallow foundations located near slopes. [USQ Project]

Prasad, Nitesh Nitin (2011) Verification of simplified optimum designs for reinforced concrete beams. [USQ Project]

Pratt, Daniel (2011) Near infrared photogrammetric technique on structure beam monitoring. [USQ Project]

R

Rackemann, Benjamin (2011) The analysis and redesign of the spraycam sprayer to incorporate fibre composite pultrusions. [USQ Project]

Randall, Neil William (2011) A preliminary analysis of the effectiveness of the new QLD GDL program. [USQ Project]

Ryan, Richard (2011) Optimisation of flow through a horizontal spiral baffled filter. [USQ Project]

S

Searle, Joshua (2011) The efficient use of building mechanical services for saving energy. [USQ Project]

Seccull, Christopher (2011) Darwin residential end use pilot study. [USQ Project]

Strahley, Matthew (2011) A comparison of depth sounder positioning techniques for hydrographic/bathymetric surveys. [USQ Project]

T

Tan, Yian Yian (2011) Measuring with Bees II: in home power and water monitoring. [USQ Project]

Temple-Watts, Philip (2011) An investigation into the suitability Of volunteered information to create a flood extent map. [USQ Project]

Tomkins, Brock William (2011) Chemical resistance of geopolymer concrete against H2SO4 & NaOH. [USQ Project]

Truasheim, Barak (2011) CFD modelling of a pump intake. [USQ Project]

Turnbull, Jon (2011) Improving the performance of the Nanango wastewater treatment plant. [USQ Project]

V

Veenstra, Nathaniel (2011) Optimum strut-and-tie model for a cantilever curved wall. [USQ Project]

W

Walsh, Dan (2011) Design and retrofit a compressed gas powered engine to a motor scooter. [USQ Project]

Ward, Tristan (2011) Multicore algorithms for image alignment. [USQ Project]

Wilson, Paul (2011) Effectiveness of lime stabilisation on reactive soils for main roads. [USQ Project]

Wilson, Wayne (2011) Housing affordability in Roma: can progress be made within the regulatory and policy framework? [USQ Project]

Y

Yin, Matthew (2011) Using local gravel sources and granular stabilisation for the production of pavement gravels in the Toowoomba region. [USQ Project]

Z

Zeller, Karl (2011) Evaluation of the operational characteristics of heavy vehicles at signalised intersections in Queensland. [USQ Project]