Items where Year is 2011

Thesis (Non-Research)

Bacor, Gerson (2011) Cloud-based network simulator for next generation wireless technology (WiMAX and LTE). Coursework Masters thesis, University of Southern Queensland. (Unpublished)

Gussen, Ben (2011) The Tower of Babel Syndrome: locality and governance in response to the ecological crisis. Honours thesis, University of Auckland, New Zealand . (Unpublished)

USQ Project

Alexis, Jeremie (2011) Developing a home-based functional application for an EEG-based brain computer interface. [USQ Project]

Atem, Thiew (2011) The skid mounted substation. [USQ Project]

Bauer, Amelia (2011) Investigation into the biochemical methane potential of abattoir wastewater. [USQ Project]

Brookshaw, Iain (2011) Real time implementation of obstacle avoidance for an autonomous mobile robot using monocular computer vision. [USQ Project]

Brown, Steven (2011) Design of a high-shear geopolymer concrete mixer. [USQ Project]

Bruce, Thomas (2011) Investigation of cost and performance characteristic of photovoltaic panels. [USQ Project]

Case, Jiel (2011) Initial design of a high-performance and cost-effective mountain bike. [USQ Project]

Cox, Adam (2011) Stereo vision for webcams. [USQ Project]

Craig, Aston J. (2011) Investigation into a fleet bearing monitoring system. [USQ Project]

Dakin, Anthony (2011) Investigation of the suitability of finger jointed structural timber for use in nail plated roof trusses. [USQ Project]

Davydov, Alexey (2011) Investigation of the structural failure of plywood noise barriers. [USQ Project]

Delahunty, Bruce (2011) Elevated highways – a solution to Brisbane’s traffic congestion? [USQ Project]

Dudley, Samuel (2011) Stability of underground tunnelling using relaxation techniques. [USQ Project]

Evans, Darryl (2011) Prototype development for a procurement and electronic document management system. [USQ Project]

Farrington, Jock (2011) Redesign of an FSAE race car’s steering and suspension system. [USQ Project]

Fenn, Scott P. (2011) Investigation into relocatable home design and construction. [USQ Project]

Fichera, Anthony (2011) A practical comparison of VISSIM and SIDRA for the assessment of development impacts. [USQ Project]

Fitzgerald, Danial (2011) Managing the repair of transport infrastructure after a natural disaster. [USQ Project]

Graham, Kim (2011) Local government greenhouse gas abatement reporting. [USQ Project]

Harriman, Adam J. (2011) Smart Grid for tomorrow’s electricity distribution. [USQ Project]

Harrington, Daniel (2011) CSG water as a medium to grow marine microalgae for biofuel production. [USQ Project]

Heaton, Erin (2011) Use of vibration signature in structural health monitoring (composite/internal damages). [USQ Project]

Heit, Andrew (2011) An investigation into the parameters that affect the swell factor used in volume and design calculations at Callide open cut coal mine. [USQ Project]

Hockey, Josh (2011) Biometric analysis for remote examination system. [USQ Project]

Keleher, Matthew (2011) Analysis of high-speed rural traffic crashes within the South-West district of Toowoomba regional council. [USQ Project]

Kemp, Ryan (2011) Investigates the effect of surface shear on pavements near road intersection. [USQ Project]

Kilian, Simone (2011) Sugarcane bagasse reinforced thermoplastic composites. [USQ Project]

Kmita, Shane (2011) Echo cancellation in VoIP using digital adaptive filters. [USQ Project]

Ledger, Allen (2011) The development of a high precision terrestrial laser scanner calibration range at USQ. [USQ Project]

Lenton, Paul (2011) Use of near-infrared photogrammetry to determine crack and surface deformation in small structures. [USQ Project]

Leong, Ik Sung (2011) Broadband satellite internet service testing. [USQ Project]

Maher, Daniel (2011) Projection of computer design data onto digital photographs. [USQ Project]

Mandava, Jagan (2011) Mechanical behaviour of polymeric composition based on available natural fibres in Australia. [USQ Project]

Marion, Michael (2011) A comparison of AUSGeoid09 and AUSGeoid98 in the Hawkesbury Valley. [USQ Project]

Mautoga, Marau (2011) Fracture toughness of glass powder reinforced vinyl ester resin post cured in a conventional oven using flexural test. [USQ Project]

McDonald, Matthew (2011) Investigation into the limitation of measuring to 360 Degree prisms using automatic target recognition technology. [USQ Project]

McHugh, William (2011) Properties of nickel as a magnetostrictive material for ultrasonic conditions. [USQ Project]

Meredith, Tyronne (2011) Options for the replacement of aging bridges under local authority control in rural areas of Queensland. [USQ Project]

Millard, Aaron (2011) Property rights, cadastral boundaries & coastal erosion in New South Wales. [USQ Project]

Mohr, David (2011) Performance characterisation of pressure regulation devices used in broad-acre irrigation. [USQ Project]

Morris, Mike (2011) Implementation of electronic measurement and recording of strata title field notes. [USQ Project]

Motswagae, Tshepo (2011) A laboratory experiment based on the ‘Segway’. [USQ Project]

Nixon, Phillip (2011) Using sun observations to set an azimuth combining and comparing Automatic Target Recognition in a Total Station with GPS observed time and position. [USQ Project]

O'Keeffe, Andrew (2011) Behaviour of polymer concrete for infilling fibre composite tubes. [USQ Project]

Olm, David William Charles (2011) Management of road reconstruction and repair following a flooding disaster. [USQ Project]

Peauril, Joshua (2011) Recycling glass fibre composites – process and viability. [USQ Project]

Penman, Brian (2011) Calculation and comparison of the noise and latency of RTK observations using radio link and NTRIP. [USQ Project]

Peters, Renee (2011) Advanced analysis of shallow foundations located near slopes. [USQ Project]

Prasad, Nitesh Nitin (2011) Verification of simplified optimum designs for reinforced concrete beams. [USQ Project]

Pratt, Daniel (2011) Near infrared photogrammetric technique on structure beam monitoring. [USQ Project]

Rackemann, Benjamin (2011) The analysis and redesign of the spraycam sprayer to incorporate fibre composite pultrusions. [USQ Project]

Randall, Neil William (2011) A preliminary analysis of the effectiveness of the new QLD GDL program. [USQ Project]

Ryan, Richard (2011) Optimisation of flow through a horizontal spiral baffled filter. [USQ Project]

Searle, Joshua (2011) The efficient use of building mechanical services for saving energy. [USQ Project]

Seccull, Christopher (2011) Darwin residential end use pilot study. [USQ Project]

Strahley, Matthew (2011) A comparison of depth sounder positioning techniques for hydrographic/bathymetric surveys. [USQ Project]

Tan, Yian Yian (2011) Measuring with Bees II: in home power and water monitoring. [USQ Project]

Temple-Watts, Philip (2011) An investigation into the suitability Of volunteered information to create a flood extent map. [USQ Project]

Tomkins, Brock William (2011) Chemical resistance of geopolymer concrete against H2SO4 & NaOH. [USQ Project]

Truasheim, Barak (2011) CFD modelling of a pump intake. [USQ Project]

Turnbull, Jon (2011) Improving the performance of the Nanango wastewater treatment plant. [USQ Project]

Veenstra, Nathaniel (2011) Optimum strut-and-tie model for a cantilever curved wall. [USQ Project]

Walsh, Dan (2011) Design and retrofit a compressed gas powered engine to a motor scooter. [USQ Project]

Ward, Tristan (2011) Multicore algorithms for image alignment. [USQ Project]

Wilson, Paul (2011) Effectiveness of lime stabilisation on reactive soils for main roads. [USQ Project]

Wilson, Wayne (2011) Housing affordability in Roma: can progress be made within the regulatory and policy framework? [USQ Project]

Yin, Matthew (2011) Using local gravel sources and granular stabilisation for the production of pavement gravels in the Toowoomba region. [USQ Project]

Zeller, Karl (2011) Evaluation of the operational characteristics of heavy vehicles at signalised intersections in Queensland. [USQ Project]