Investigation of the flexural strengthening of concrete beams using external prestressing

Davis, Shawn Wayne (2005) Investigation of the flexural strengthening of concrete beams using external prestressing. [USQ Project]

Preview

Text (Main Project) Davis_2005_Main_Project.pdf Download (1MB)

Abstract

External prestressing offers a viable strengthening and rehabilitation tool for aging, overloaded or weakening members. This technology can therefore help to strengthen
all existing flexural members that external prestressing can practically be applied to, including bridge girders and structural flexural beams. This project aims to investigate
the variation in flexural strength of rectangular reinforced concrete beams with the application of an external prestress. The project aims at comparing the deflection and crack patterns of two loading systems along with the flexural capacity increase. These 2 loading conditions can hopefully represent or model the loading patterns that such flexural members will experience in service. With the inclusion of the external prestressing,
not only will the flexural strength be expected to increase, but the deflection decrease, and crack widths minimised.
Some major aims of the project are as follows:
- To obtain the magnitude of the change in the specimens flexural strength after prestressing;
- To observe and compare the change in the specimens deflections and crack widths.
Four test specimens were prepared and cured in a similar environment. Two of the beams were used as control beams, and two of the beams were given an external prestress.
The displacement and flexural loading capacity of the test beams were compared to the control beams for the two loading positions.
The results have shown that under both loading positions, the reinforced concrete beams have reacted with positive results. The first test involving the loading position of A = 1 m, achieved a 50% increase in flexural strength. The deflection of the prestressed beam was reduced by 63.18% after prestressing was applied. For the second test with the loading position of A = 0.5 m, a 74% increase in flexural strength was achieved with a 59% deflection reduction after prestress.
The large increase in flexural strength and effectiveness of the prestressing force to close the cracks present within the beam reinforce the effectiveness of this technique as a means to rehabilitate flexural members in service. Though this prestressing method
is a more 'conventional' method, the experimental data and results further prove that it is in fact an effective method.
All these advantages make this classical style post-tensioning method effective in the
rehabilitation or strengthening of Australia's concrete structures. Hopefully the project will show positive results and lead to further studies and applications of the external prestressing technology for flexural strengthening.
The second order effects of the prestressing effect have not been included, where at midspan the depth of the prestressing bar varies with load applied, as the beam deflects.
The effects have been assumed negligible for loads used in this study, but for increasing loads, or increasing sensitive members, these effects should be taken into account.

Statistics for this ePrint Item

Item Type:	USQ Project
Refereed:	No
Item Status:	Live Archive
Additional Information:	Testing Data Appendix B files have been loaded as a Zip File.
Faculty/School / Institute/Centre:	Historic - Faculty of Engineering and Surveying - Department of Agricultural, Civil and Environmental Engineering (Up to 30 Jun 2013)
Date Deposited:	11 Oct 2007 00:25
Last Modified:	27 Sep 2022 04:34
Uncontrolled Keywords:	flexural strengthening, concrete beams, external prestressing
Fields of Research (2008):	09 Engineering > 0905 Civil Engineering > 090506 Structural Engineering
Fields of Research (2020):	40 ENGINEERING > 4005 Civil engineering > 400510 Structural engineering
URI:	https://sear.unisq.edu.au/id/eprint/622

Actions (login required)

Archive Repository Staff Only