Browse by Fields of Research (ANZSRC 2020)

Molloy, Aron (2016) Improving project delivery: through the application of project management techniques. [USQ Project]

Fell, Bradley (2016) Design of a portable bushfire attenuation fence. [USQ Project]

Alajmi, Abdalrahman R. E. S. (2016) Theoretical study of the effect of fibre orientations and porosity on heat conductivity of reinforced polymer composites. [USQ Project]

Alajmi, Faisal (2015) Study on tribological performance of mild steel under canola bio-lubricant conditions. [USQ Project]

Kubler, Kristy A C (2015) Optimisation of off-highway truck fuel consumption through mine haul road design. [USQ Project]

McQuade, Samuel R (2015) Recyclable disposable helmet design. [USQ Project]

Kerr, James (2015) Dynamic response testing method of damage detection in fibre composite structures. [USQ Project]

Triaca, Bryan F (2015) Disposable stormwater sampling device for water quality hazard detection. [USQ Project]

Sadanala, Swapan (2015) Failure analysis of total hip replacement and the feasibility of fibre composites as an alternative material. [USQ Project]

Anderson, Oliver Josh (2015) Feasibility assessment of low cost stereo computer vision in clay target shooting coaching. [USQ Project]

Wall, Rhyan (2015) Improved cooling system for USQ's small scale icing wind tunnel. [USQ Project]

Vever, Thierry-Jacques Patrick (2015) Insulated container testing & rating system development. [USQ Project]

Pike, Samuel (2015) Investigation into the delamination of composite laminates on aircraft rudders due to fluid ingress and icing. [USQ Project]

Cooper, David (2015) Sensor platform for monitoring conveyor belt rollers. [USQ Project]

Richardson, Kieran (2015) System design of a hydrogen induction system as a retrofit item compatible with existing internal combustion engines. [USQ Project]

Mohammed, Rafiqul Islam (2015) Finite element analysis of fillet welded joint. [USQ Project]

Altamar, Rashed (2014) Fracture behaviour of fibre/polymer composites based on synthetic and natural fibres. [USQ Project]

Windebank, Mark (2014) Locomotive cooling system strategy optimisation. [USQ Project]

Alqahtani, Rafi Ali (2014) Flexural properties of sisal fibre/epoxy Composites. [USQ Project]

Dray, Kevin (2014) Optical access engine development. [USQ Project]

Mayne, Caleb (2014) Reliability-centered maintenance analysis of a Rio Tinto iron ore locomotive engine. [USQ Project]

Taylor, Patrick (2014) Supercritical CO2 geothermal energy system analysis. [USQ Project]

Fairbanks-Smith, Michael S. (2014) Use of fibre-optic (FBG) sensors in the structural health monitoring of a battlefield helicopter rotor blade. [USQ Project]

Briskey, Kyle Gary (2013) Improving caravan design by modelling of airflow. [USQ Project]

Keller, Jason (2013) Optimisation of the spoked bicycle wheel. [USQ Project]

Sutcliffe, John William (2013) Urban wind turbine characterization system. [USQ Project]

Bates, Matthew (2012) The selection of inegrated and sustainable waste processing techniques for application within Indonesia. [USQ Project]

Case, Jiel (2011) Initial design of a high-performance and cost-effective mountain bike. [USQ Project]

Craig, Aston J. (2011) Investigation into a fleet bearing monitoring system. [USQ Project]

Farrington, Jock (2011) Redesign of an FSAE race car’s steering and suspension system. [USQ Project]

Rackemann, Benjamin (2011) The analysis and redesign of the spraycam sprayer to incorporate fibre composite pultrusions. [USQ Project]

Smith, B. (2010) A biomechanical analysis for improved ergonomics in metal detector products using trajectory optimisation. [USQ Project]

Philips, Cameron Charles MacGregor (2010) Gladstone Power Station demineralised water plant asset strategy development. [USQ Project]

Nawratzki, Guy (2010) Suspension development for a short circuit racing car. [USQ Project]

Salomon, Jake (2010) The design and construction of an exercise device for use in physiotherapy of the arm. [USQ Project]

Padda, Ranjit Singh (2008) Air flow through two layered mesh at varying porosity and spacing. [USQ Project]

Cleary, Edward Thomas (2008) Pulsed liquid jet for rock breaking. [USQ Project]

Yavu, Isei Ledua (2008) Fracture toughness of phenolic resins composite by using saw dust as filler of percentage by weight. [USQ Project]

Cecil, Travis (2008) Investigate the best percentage by weight of glass powder, as fillers in phenolic resins using tensile tests. [USQ Project]

Nixon, Robert Jeffrey (2008) Investigation of the best percentage, by weight, of glass powder as filler in phenolic resin using three point bending test. [USQ Project]

Lamari, Alfio Concetto (2008) Rolling stock bearing condition monitoring systems. [USQ Project]

Prasser, Nathan (2008) The development of a computer based system for the rehabilitation of arm movements of stroke patients. [USQ Project]

Carden, Scott Benjamin (2008) The development of an antigravity arm to assist in the rehabilitation of stroke patients. [USQ Project]

Kenna, Brian (2008) Water metering and revenue protection. [USQ Project]

Wai-Ming, Yeung (2008) Confirmation program of safety inspection of lift components (CPSI). [USQ Project]

Holzheimer, Carson Keith (2007) Automation of the rollingstock twist test. [USQ Project]

Parkin, Damion Ian Harcourt (2007) Design of a rear suspension configuration for a live axle race car to achieve optimum handling characteristics. [USQ Project]

Stewart, Robert (2007) Design of electro-hydraulic controlled poppet valves. [USQ Project]

Jones, Bruce Thomas (2007) Dragline maintenance engineering. [USQ Project]

Gustafson, Adrian Mark (2007) Investigation of a new generation degradable implant material. [USQ Project]

Booshand, Peter John (2007) Literature review of advanced research and innovation in the mining industry. [USQ Project]

Crowe, Daniel Leigh (2007) Management of physical assets at Purga Quarry. [USQ Project]

El Komy, Ahmed (2007) Millmerran Power Station ROM coal blockage removal system. [USQ Project]

Lefhoko, Mmitsi (2007) Power station operations Millmerran power station feed water dissolved oxygen control. [USQ Project]

Sullivan, Steven Michael (2007) Research, design and develop a pipe latching/unlatching device that can be used to help automate the pipe tripping process. [USQ Project]

Lee, Wai Hung (2007) Shrinkage reduction of thermoset matrix particulate reinforced composites during hardening using low power microwave. [USQ Project]

Hansen, Luke (2007) The use of waste cooking oil as an alternative fuel for the diesel engine. [USQ Project]

Davidson, Thomas Peter George (2007) Using tensile tests as benchmark, investigate the best percentage by weight of slg, as fillers, in Phenolic resins post-cured by microwaves. [USQ Project]

Weston, Bill Thomas (2007) Design and trial of an alternative option for suburban sewerage pump stations. [USQ Project]

McKie, Scott (2007) Development of a portable high-wall lighting system. [USQ Project]

Leong, Suet-Leong (2006) Managing product development process for time market. [USQ Project]

Gurney, Richard Noel (2006) Best percentage weight of microspheres as fillers in resin using three-point bending test. [USQ Project]

Armstead, Jared Kenneth (2006) Chassis development for the formula SAE racer. [USQ Project]

Napper, Bryce (2006) Computational fluid dynamics (CFD) investigation of the thermal efficiency of micro climate conditioning of a typical workstation. [USQ Project]

Inderbitzin, Martin David (2006) Design review and analysis of Collinsville power station coal handling plant. [USQ Project]

Whittred, Daniel (2006) Developing a monitoring and control system for irrigation pumping units. [USQ Project]

Janusaitis, Stephen (2006) Impact response of flat and perforated plate. [USQ Project]

Rae, Andrew Stewart (2006) Performance and stability analysis of an AC variable speed drive. [USQ Project]

Ang, Soon Lim (2006) Predicting the crushing stress of composite materials. [USQ Project]

Kruger, Scott (2006) The design and optimisation of a prototype sailplane. [USQ Project]

Clarke, Daniel John (2006) The design of a three point linkage implement height control system. [USQ Project]

Vella, Anthony (2006) Ventilation of highwall mining to control methane concentration at the Moura Mine. [USQ Project]

He, Mingqian Belinda (2006) Analysis of the recycling method for aluminum soda cans. [USQ Project]

Tuxford, Andrew (2006) Numerical analysis of a closed face impeller. [USQ Project]

Lee, Chin Fung (2006) Quality review of unit technical logistic and maintenance processes. [USQ Project]

Gribble, Brett (2006) Stress relieving furnace modelling and analysis. [USQ Project]

Hugo, Michael (2006) Automatic roller shell groover. [USQ Project]

Massaro, Aaron (2006) The effect of water ratio on the mechanical properties of refactory materials. [USQ Project]

Campbell, Nicholas (2005) Analysing the effect of speed variation on irrigation efficiency in travelling irrigators. [USQ Project]

Janke, Scott (2005) Analysis of a sheet metal bucket elevator head. [USQ Project]

Chan, Teck Wai Alan (2005) Computational fluid dynamics (CFD): investigation for improving pigs' housing design. [USQ Project]

Ali, Noorahmad Bin (2005) Corrosion in the boiler tubes of the Tuas South Incineration Plant, Singapore. [USQ Project]

Domrow, Ryan (2005) Development of a mechanical testing system to investigate road deformation. [USQ Project]

Yap, Lee Jiuan (2005) Evaluation of wet scrubber systems. [USQ Project]

Ng, Hai Ching (2005) Investigation of tenable carbon monoxide and visibility level for a fired room. [USQ Project]

Teo, Chin Teng (2005) Lifting mechanism of wheelchair. [USQ Project]

Chan, Lai Kuan (2005) Reduction of nitrogen oxides (NOx) using liquefied petroleum gas (LPG) in spark ignition (SI) engine. [USQ Project]

Popa, Cristina Elena (2005) Steering system and suspension design for 2005 formula SAE-A car. [USQ Project]

Field, Benjamin J. (2005) Stress analysis of axially loaded perforated steel plates by experimental and finite element methods. [USQ Project]

Lim, Chun Hao (2005) Replacement of chiller system of a terminal building. [USQ Project]

Chia, Wee Chong (2005) Research and development of multi purpose carbide end mill. [USQ Project]

Silva, Alan Grant Lance (2004) The development of a new multi-directional fall arrest device. [USQ Project]

Cheah, Siew Lee (2004) Analysis of engine performance using palm oil methyl ester. [USQ Project]

Taylor, Brett C. (2004) Assessment of appropriate pressure vessel flange bolt tension by finite element modelling. [USQ Project]

Hockings, Peter (2004) Fast-response piezoresistive pressure transducers for thermofluids experiments. [USQ Project]

Stansbie, Clayton Harley (2004) Natural gas burner for copper smelter converter. [USQ Project]

Ruhle, Andrew John Alexander (2004) Redesign and analysis of Janke Bros. F500P parallelogram planting unit. [USQ Project]

Jong, Hua Kwan (2004) Safety management system. [USQ Project]

Lim, Pei Li (2004) The effect of compression ratio on the CNG-diesel engine. [USQ Project]