Items where Year is 2013

Thesis (Non-Research)

Abolkhairat, Radiya (2013) Smart forms: a survey to state and test the most major electronic forms technologies that are based on W3C standards. Coursework Masters thesis, University of Southern Queensland. (Unpublished)

Carnahan, Sharyn (2013) Investigating fatty acid composition in the diet to determine biomarkers indicative of obesity-related disease. Honours thesis, University of Southern Queensland. (Unpublished)

Foley, Peter (2013) A framework-free grammatical analysis of English sentence and auxiliary verb patterns for use in ESL education. Coursework Masters thesis, University of Southern Queensland. (Unpublished)

Osmachenko, Aaron J. (2013) Mindfulness: a mediator of interpersonal style in predicting academic adjustment. Doctorate (other than PhD) thesis, University of Southern Queensland. (Unpublished)

USQ Project

Alawad, Aziz (2013) Response surface methodology. [USQ Project]

Barrett, Roland (2013) Operating temperature of current carrying copper busbar conductors. [USQ Project]

Basson, Johan (2013) Analysis of the aerodynamic attributes of motor vehicles. [USQ Project]

Bell, Mitchell (2013) Accuracy of a machine guided grader. [USQ Project]

Birch, Byrenn James Colin ORCID: https://orcid.org/0000-0003-0625-2455 (2013) Simulation of fibre Bragg grating (FBG) reflection spectrums using OptiGrating. [USQ Project]

Blyth, James Ian (2013) Optimising earth dam design in seasonal freeze-thaw climates. [USQ Project]

Bowles, Yvonne Elizabeth (2013) A consistent approach to headlight screens in NSW. [USQ Project]

Brailsford, Steven (2013) Cathodic protection of reinforced concrete bridges in the marine environment as an asset management tool. [USQ Project]

Briskey, Kyle Gary (2013) Improving caravan design by modelling of airflow. [USQ Project]

Burke, Maxwell James (2013) LiDAR data for DEM generation and flood plain mapping. [USQ Project]

Burton-Ree, Nicholas (2013) Hydroelectric generators for third world countries. [USQ Project]

Campbell, Eyre (2013) Simulation of sawmill yields at Hyne Tuan Pine Mill. [USQ Project]

Cleaver, Benjamin L. (2013) Evaluation of the performance of web-based GNSS post processing systems. [USQ Project]

Couch, P. (2013) Subtransmission line cost reduction through optimised design, 132 kV Wellington-Dubbo case study. [USQ Project]

Cox, Scott (2013) Design of remote laboratory experiments for integration into MEC2402 – stress analysis. [USQ Project]

Crawford, Peter Alexander (2013) Improving surfing conditions in conjunction with coastal erosion protection. [USQ Project]

Dann, William (2013) Investigation into traffic controller health and safety at road works in Queensland. [USQ Project]

Dickmann, Keith (2013) Remote access laboratory design and installation. [USQ Project]

Dillon, Megan (2013) Little streets in small cities: the role of laneway activation in regional Queensland CBD revitalisation. [USQ Project]

Dinsmore, Robert Colin (2013) Investigating the impact of the Request For Information process in construction. [USQ Project]

Dobson, David (2013) Electro muscle stimulus system for wasted muscle rehabilitation. [USQ Project]

Eaton, Timothy (2013) Exploring the application of closed form solutions in geotechnical problems. [USQ Project]

Ellis, N. (2013) Inspection of power transmission lines using UAVs. [USQ Project]

Ellis, S. (2013) Upgrade of datalogger system. [USQ Project]

Ennis, Rodney James (2013) ScramSpace hypersonic aerodynamic drag coefficient (CD) determined by free-flight experiments at TUSQ wind-tunnel. [USQ Project]

Fan, Xinchen (2013) Piecewise adaptive controller design based on ECP model 730 magnetic levitation system. [USQ Project]

Fletcher, Wade Daniel (2013) MUSIC model accuracy in predicting stormwater quality. [USQ Project]

Freeman, Bryan (2013) A preliminary feasibility study for transporting Surat Basin export coal using Maglev technology. [USQ Project]

Gaffney, Allister Henry (2013) Water sensitive urban design for the Spring Creek catchment and MUSIC sensitivity analysis. [USQ Project]

Geary, A. (2013) Model and analysis of a broken conductor (source isolated) earth fault on radial 11kV distribution feeders. [USQ Project]

Green, Nathan Andrew (2013) Investigation of cyclist safety within the Brisbane Bicycle Hire Scheme. [USQ Project]

Greig, Edward Stephen (2013) Numerical simulation of water waves in reservoirs affecting evaporation. [USQ Project]

Griinke, Tyler John (2013) Development of an artificial neural network (ANN) for predicting tribological properties of kenaf fibre reinforced epoxy composites (KFRE). [USQ Project]

Hartwig, Andrew (2013) Management of low traffic volume roads unsealed road classification system. [USQ Project]

Hautsalo, Kari (2013) Evaluation of the performance of different global satellite navigation systems (GNSS) for Australian GNSS users. [USQ Project]

Herriman, Kayne (2013) Small compressed air energy storage systems. [USQ Project]

Horan, Darryl (2013) Comparison of a traditional and a distributed storage water supply network for an isolated system. [USQ Project]

Houweling, F. (2013) Human interface device (HID) keyboard application for android. [USQ Project]

Ikin, James (2013) Design and development of a fibre optic microphone. [USQ Project]

Janse van Rensburg, Barnard (2013) The development of a light weight composite conveyor belt idler roller. [USQ Project]

Jenaway, Brett (2013) Evolution of stadiums: a study in the design and construction of ancient and modern stadia. [USQ Project]

Johnson, Peter (2013) Comparison of direct rainfall and lumped-conceptual rainfall runoff routing methods in tropical North Queensland – a case study of Low Drain, Mount Low, Townsville. [USQ Project]

Johnstone, C. (2013) Wireless communication between dataNode systems. [USQ Project]

Keller, Jason (2013) Optimisation of the spoked bicycle wheel. [USQ Project]

Kerr, Mitchell (2013) Axisymmetric scramjet inlet operation with varying cowl positions. [USQ Project]

Kirjan, Jeremy Nicholas (2013) Use of wire extensometers for monitoring pavement performance in areas of slope instability. [USQ Project]

Kohn, Nicholas (2013) Effects of proposed bioretention system on existing waterbird habitat. [USQ Project]

Langes, Chris (2013) Investigation of shunt vehicle derailments. [USQ Project]

Lanigan, Christopher John (2013) Implementation of a condition monitoring program for high voltage (HV) assets for the Santos GLNG Project. [USQ Project]

Long, Derek ORCID: https://orcid.org/0000-0001-9414-5064 (2013) A.R Drone vision-guided searching. [USQ Project]

Lovett, Jy (2013) Engineering design of a disposable water bottle for an Australian market. [USQ Project]

Madanavosa, Savenaca (2013) The effect of efflorescence on the mechanical properties of geopolymers. [USQ Project]

Martin, Nathanael John (2013) Domestic lawn mower blade noise and influence of machine geometry. [USQ Project]

McInally, Stuart Anthony (2013) Cost effective galvanising in remote areas. [USQ Project]

Mehoub, Gabrel (2013) Adhesive wear and frictional behaviour of glass fibre reinforced thermoset composites. [USQ Project]

Metcalfe, Patrick James (2013) Evaluation of remotely piloted aircraft in surveying applications. [USQ Project]

Neumann, Philip (2013) Evaluation of the strength characteristics of recycled bituminous pavement materials. [USQ Project]

Orange, Lachlan (2013) Projectile impacts on hardened alloy steel plate. [USQ Project]

Pasanduka, Timothy (2013) Systematic procedure to determine line current differential relay settings with back up distance for a 500 kV ac three phase line. [USQ Project]

Patel, Kunal J. (2013) Effects of transformer inrush current. [USQ Project]

Peckett, Damian (2013) Adaptive Markov decision control of high-frequency drip irrigation systems. [USQ Project]

Pestano, Julius Rino (2013) Reducing road fatalities – vehicular ad hoc network. [USQ Project]

Petersen, S. (2013) Numerical modelling of minor waterway barriers for fish passage in the Mary River catchment. [USQ Project]

Reynolds, Peter William (2013) Engineering correlations for the characterisation of reactive soil behaviour for use in road design. [USQ Project]

Roberts-Apps, Adam (2013) Development of a coal wagon monitoring and control system. [USQ Project]

Rogers, S. (2013) Conjugate heat transfer analysis evaluation of a water cooled component for use in an electric arc furnace. [USQ Project]

Sams, Mathew Steven (2013) Numerical and physical modelling of a 2D tunnel heading at collapse. [USQ Project]

Sana, Newman (2013) Air particle monitoring using image processing. [USQ Project]

Savage, Andrew (2013) Brisbane City Council strategic planning: delivery of sustainable transport. [USQ Project]

Sebby, Melcuam (2013) Evaluation of roads safety processes currently used in Queensland. [USQ Project]

Serra, Michael Peter (2013) Geotechnical stability analysis using student versions of FLAC, PLAXIS and SLOPE/W. [USQ Project]

Skillington, Robert George (2013) DSP based lock-in amplifier. [USQ Project]

Smith, Wesley (2013) The role of private enterprise in transforming the water, sanitation and hygiene sector in rural sub-Saharan Africa. [USQ Project]

Spilsbury-Brinkmann, Casey (2013) The economic feasibility of upgrading Moree’s light industrial area to legally cater for restricted access vehicles. [USQ Project]

Spurling, Harrison (2013) Water sensitive urban design for sustainable road development. [USQ Project]

Stanley, Thomas (2013) Assessment of the FARO 3D focus laser scanner for forest inventory. [USQ Project]

Sussanna, Vittorio (2013) AUSGeoid09 performance in mountainous regions. [USQ Project]

Sutcliffe, John William (2013) Urban wind turbine characterization system. [USQ Project]

Szabo, Phillip (2013) Development of a pump efficiency monitor for use in cotton irrigation. [USQ Project]

Timings, James (2013) Unmanned aerial vehicle static object detection. [USQ Project]

Tonkin, Kyle (2013) Make Garfield (6 axis robot arm) Smart through the design and implementation of voice recognition and control. [USQ Project]

Trevorrow, B. (2013) Investigation of digital audio manipulation methods. [USQ Project]

White, Christopher (2013) Wireless grain silo monitoring and control. [USQ Project]

Wicks, Jaymee (2013) Investigation of factors influencing maximum biogas production of abattoir wastewater. [USQ Project]

Zahl, Michael Stuart (2013) RTK GNSS in cadastral surveying. [USQ Project]

Zeller, Mark Nicholas (2013) Reduced road lighting standards during times associated with low traffic volumes. [USQ Project]