Browse by Fields of Research (ANZSRC 2020)

Kocoski, Micheal (2017) Future management of survey infrastructure within NSW. [USQ Project]

Pettersson, Declan (2016) 3D hydrologic features mapping with imaging rover. [USQ Project]

Redding, Bradley (2016) 3D modelling for surveying projects using unmanned arial vehicles (UAVs) and laser scanning. [USQ Project]

Robertson, Thomas (2016) Application of MODIS and Google earth data to assess the health of the Mitchell grasslands through web based GIS. [USQ Project]

Zador, Tari (2016) Assessing spatial mismatch patterns in the Gold Coast. [USQ Project]

Broome, Lachlan (2016) Comparison between terrestrial close range photogrammetry and terrestrial laser scanning. [USQ Project]

McDonnell, James (2016) Effect of time interval variations on network RTK in a high multipath environment. [USQ Project]

Collins, Matthew (2016) Identification of the spectral signature of noxious weed St. John’s wort and development of a tracking methodology via remote sensing. [USQ Project]

Thompson, Zaine (2016) Integration of Trimble V10 imaging rover with R10 GNSS receiver for data collection under dense tree canopies. [USQ Project]

Lynch, Joshua David (2016) Investigation of dam wall deformation surveys. [USQ Project]

Hathaway, Samuel B. (2016) Real world 3D accuracy achievable of Australian standard 5488-2013 classification of subsurface utility information using electromagnetic field detection. [USQ Project]

Jelacic, Antonio (2016) Terrestrial laser scanner for 3D modelling of USQ Toowoomba campus. [USQ Project]

Anderson, Elizabeth (2016) The application of visualisation techniques for stratum and strata boundaries within the New South Wales digital cadastre. [USQ Project]

James, Jeffrey (2016) The effect of materials and conditions on reflectorless electronic distance measurements from a Total station. [USQ Project]

Roberts, David (2016) The effects of control point shape and distribution in the creation of a numeric cadastral data base. [USQ Project]

McFadden, Patrick (2016) Tidal predictions in ungauged estuaries for boat-ramp access windows. [USQ Project]

Costello, Brad (2016) Underground check survey. [USQ Project]

Gann, Nicholas (2016) Visualisation of a 3D cadastre using terrestrial laser scanning. [USQ Project]

Bein, Vincent (2015) Effect of time interval variations on RTK derived distances. [USQ Project]

Kilpatrick, Glen R (2015) DEM generation and hydrologic modelling using LiDAR data. [USQ Project]

Pescod, Rhys (2015) Improvements to the calibration of Electronic Distance Measurement Equipment (EDME). [USQ Project]

Mattsson, Bradley I (2015) The identification of all rights, obligations, and restrictions on freehold land in South Australia. [USQ Project]

Ismail, Wafeek (2015) Evaluating the differences and accuracies between GNSS applications using PPP. [USQ Project]

Agoritsas, Stavroula (2015) Investigating the accuracy of terrestrial laser scanning within a rail environment. [USQ Project]

Cox, Raymond (2015) Real-world comparisons between target-based and targetless point-cloud registration in FARO Scene, Trimble RealWorks and Autodesk Recap. [USQ Project]

Smeaton, Curtis (2015) Surveying applications of photogrammetric UAVs - a comparison with conventional survey techniques. [USQ Project]

Coburn, Adam John (2014) Laser scanning for forest structure analysis. [USQ Project]

Bell, Mitchell (2013) Accuracy of a machine guided grader. [USQ Project]

Sussanna, Vittorio (2013) AUSGeoid09 performance in mountainous regions. [USQ Project]

Metcalfe, Patrick James (2013) Evaluation of remotely piloted aircraft in surveying applications. [USQ Project]

Cleaver, Benjamin L. (2013) Evaluation of the performance of web-based GNSS post processing systems. [USQ Project]

Zahl, Michael Stuart (2013) RTK GNSS in cadastral surveying. [USQ Project]

Marion, Michael (2011) A comparison of AUSGeoid09 and AUSGeoid98 in the Hawkesbury Valley. [USQ Project]

Millard, Aaron (2011) Property rights, cadastral boundaries & coastal erosion in New South Wales. [USQ Project]

Strahley, Matthew (2011) A comparison of depth sounder positioning techniques for hydrographic/bathymetric surveys. [USQ Project]

Weyman-Jones, Ashley (2010) An investigation into the accuracy and limitations of automatic target recognition in total stations. [USQ Project]

Stanley, Matthew (2010) An investigation into the Australian height datum on Ballina Island. [USQ Project]

Madden-Holmes, Ben (2010) An investigation into the legislative changes affecting tidal boundaries in Queensland. [USQ Project]

Klibbe, Christopher Aaron (2010) An investigation on the high water mark as a land boundary. [USQ Project]

Jones, Simon (2010) Stop-go mobile mapping. [USQ Project]

Kiongoli, Said (2010) Testing the accuracy of machine guidance in road construction. [USQ Project]

Morrison, Scott James (2010) The development and testing of a high precision ellipsoidal - Australian height datum deformation grid for real time GPS applications. [USQ Project]

Day, Michael Peter (2010) The implications regional ecosystem mapping has on land development proposals in rural Queensland. [USQ Project]

Goodwin, Brent (2009) Analyse original marks and occupation used to reinstate boundaries for identification surveys. [USQ Project]

Blaby, Bradley Peter (2009) Re-establishment of the state border between New South Wales and Victoria. [USQ Project]

Deas, Scott (2009) The accuracy of published co-ordinates on the 'Survey Mark Enquiry Service’(SMES)in Victoria using GPS observations. [USQ Project]

Mulliss, Michael Stephen (2009) A review of the application of adverse possession within the Torrens system of land regulation in Australia. [USQ Project]

Wady, Vaughan (2009) An investigation of land and property information (NSW) proposed E-Plan process of digital survey plan lodgement in LandXML format. [USQ Project]

Surtees, Mark Stephen James (2009) Bathymetric survey of flooded open cast mine workings. [USQ Project]

Day, Anthony (2009) Investigation into the causes and possible remedies for the registered surveyor shortage in regional Queensland. [USQ Project]

Hosking, Alan (2009) Investigation into the effectiveness of reflectorless technologies on structural surveillance monitoring. [USQ Project]

Ling, Damian James (2009) Investigation of the Riegl terrestial scanners - uses and limitations. [USQ Project]

Munro, Frazer (2009) Localised geoid modelling using GPS and precise levelling data. [USQ Project]

O'Shea, Darren (2009) Proposal to incorporate volumetric (three dimensional) subdivisions in Victoria. [USQ Project]

Coaker, Leigh Herbert (2009) Reflector-less total station measurements and their accuracy, precision and reliability. [USQ Project]

Wall, Adrian (2009) The use of a terrestrial laser scanner in an open cut mining environment. [USQ Project]

Arnison, Christopher John (2009) Using ground penetrating radar (GPR) with multiple pass scans to improve 3D positional reliability of subterranean features. [USQ Project]

Smith, Anthony Patrick (2009) Surveying and the law. [USQ Project]

Taylor, Scott (2008) Development and testing of a portable GNSS network solution using the magellan propark3. [USQ Project]

Steger, Jason P. (2008) Deriving transformation parameters for existing survey co-ordinate systems in the Australian Capital Territory. [USQ Project]

Howard, Damian John (2008) Determination of property boundaries in NSW where monument movement has occurred. [USQ Project]

Hetherington, Chris (2008) Effectiveness of real time kinematic global navigation satellite system suveying (RTK GNSS). [USQ Project]

Curran, Liam Patrick (2008) Global navigation satellite systems for geodetic network surveys. [USQ Project]

Cech, Samuel (2008) The commercial implications of the NZ surveyor-general's rules for cadastral survey 2008. [USQ Project]

Black, Jamie Richard (2008) Validation of the Sydnet, continuously operating reference stations for use in global navigation satellite system surveying. [USQ Project]

Marais, Tom (2008) Virtual reference station (VRS) in South Africa. [USQ Project]

Price, Daniel (2007) A comparative review of attributes of engineers in senior management roles. [USQ Project]

Sinderberry, Mark (2007) Accuracy assessment of 3D laser scanning data utilising different registration methods. [USQ Project]

Worrall, Andrew (2007) Development of quality assurance procedures for cadastral surveying using GPS technology. [USQ Project]

Mohr, Logan (2007) Effects and controls of lateral refraction in underground coal mines. [USQ Project]

Liyanawaduge, Nawanandana Chandrasiri (2007) GPS usage and infrastructure needs for machine guidance and control in the construction projects associated with QDMR. [USQ Project]

Temple, Christopher Jed (2007) Impediments to identifying freehold land rights in N.S.W. [USQ Project]

Breddin, Ian Stewart (2007) Property rights and the littoral zone in Queensland. [USQ Project]

Mylne, George (2007) The effectiveness of a multiple-frequency global navigation satellite system (GNSS)on multipath mitigation. [USQ Project]

Brandon, Paul (2006) Quality assurance. [USQ Project]

Lawless, Daniel Patrick (2006) Defining non-tidal riparian boundaries. [USQ Project]

King, Joshua (2006) Dynamic tracking of a race car. [USQ Project]

Reynolds, Wade (2006) Mapping greens at City Golf Course. [USQ Project]

Fritsch, Mark Timothy (2006) Non-trible GPS receivers and virtual reference stations (VRS). [USQ Project]

Beer, Craig (2006) Quality assurance system in a small surveying firm. [USQ Project]

Harch, Nelson (2006) Testing mapping grade GPS carrier phase accuracy. [USQ Project]

Stoeckl, Wayne Edmund (2006) Viability of a coordinated cadastre in New South Wales. [USQ Project]

Shaw, Neil Geoffrey (2006) Evaluation of Ashtech ProMark2 survey system. [USQ Project]

McCosker, Daniel Patrick (2006) Guidelines for the use of electronic survey field notes and CAD computation files as legal records. [USQ Project]

Holloway, Stephen John (2006) The effect of wide open bays on legal boundaries. [USQ Project]

Pejakovic, Derek (2006) Theatre booking system. [USQ Project]

Falken, Jason (2005) Critical review of techniques for rigid spoolpiece metrology observation and reduction. [USQ Project]

Tanoi, Levei (2005) A model to establish a global navigation satellite system (GNSS) testing and validation center at the University of Southern Queensland. [USQ Project]

Rizzo Naudi, Antonello (2005) A quality assurance system at the Land Survey and Mapping Unit (Malta). [USQ Project]

Jacobs, Peter Gregory (2005) Assessing RTK GPS for a suburban survey practice. [USQ Project]

Heit, Jamie (2005) Quality assurance for virtual reference stations. [USQ Project]

Maseko, Mfana Elphus (2005) Restitution of land for agricultural development Ehlanzeni region Mpumalanga. [USQ Project]

Garget, Dennis (2005) Testing of robotic total stations for dynamic tracking. [USQ Project]

Wilson, David Orme (2005) The resolution of uncertain boundaries at Amity Point (North Stradbroke Island). [USQ Project]

Stephens, James Finlay (2004) Accuracy evaluation of 3-D laser imaging scans. [USQ Project]

Clerke, Adam (2004) Determination of mean high water mark within New South Wales. [USQ Project]

Pinkham, Daniel (2004) Investigation into the placement and connection of permanent survey marks for cadastral surveys. [USQ Project]

Oliver, Anthony James (2004) Relevance of identification surveys in N.S.W. conveyancing. [USQ Project]

Chua, Chun Siong (2004) Testing of robotic total stations for dynamic tracking. [USQ Project]

Wilcox, Colin Gordon (2004) The private surveyor as a spatial data custodian in the local community. [USQ Project]

McDonald, Adam John (2004) Which geoid model should be used for GPS heighting on the Toowoomba bypass project? [USQ Project]