Items where Year is 2009

A

Althaus, Kimberley (2009) Effect of irrigation management on nitrate movement under a lettuce crop. [USQ Project]

Armstrong, Andrew Jonathan (2009) Sealing works performance study. [USQ Project]

Arnison, Christopher John (2009) Using ground penetrating radar (GPR) with multiple pass scans to improve 3D positional reliability of subterranean features. [USQ Project]

Assiriyage, Buddhi Nuwan Lanka (2009) Develop a computer-based system to assess and exercise the arm movement of stroke patients. [USQ Project]

B

Backman, Shane A. (2009) Development of a high voltage DLA test apparatus. [USQ Project]

Baker, Philip James (2009) The 50 kph speed limit in residential Toowoomba. [USQ Project]

Bichel, Mitchell Neil (2009) Investigation of the quality management system at Lockyer Valley Regional Council. [USQ Project]

Blaby, Bradley Peter (2009) Re-establishment of the state border between New South Wales and Victoria. [USQ Project]

Brandis, Cameron (2009) High voltage earthing system testing - an investigation into the effects of test lead coupling on test results. [USQ Project]

Brice, Joshua (2009) An investigation into the Victorian permanent survey mark infrastructure. [USQ Project]

Burton, Bruce (2009) Griffin Road drainage diversion – feasibility study. [USQ Project]

C

Campbell, Andrew Charles (2009) Deriving a high resolution DEM from ALOS PRISM data. [USQ Project]

Camplin, Tony (2009) Development of methods to monitor continuously operating reference station antenna stability. [USQ Project]

Chan, Zee Hong (2009) Investigation of next generation IEEE 802.11n wireless local area networks (WLAN). [USQ Project]

Christensen, Zane Michael (2009) Reduction of local scour around bridge piers: combined system of aerofoil and slot. [USQ Project]

Coaker, Leigh Herbert (2009) Reflector-less total station measurements and their accuracy, precision and reliability. [USQ Project]

Coates, Gary (2009) Steering and suspension design for a SAE-A formula race car. [USQ Project]

Cole, Andrew James Shorten (2009) A comprehensive study of footing on c-φ soil slopes - numerical and physical modelling. [USQ Project]

Cooney, Tyson (2009) Epoxidised resins from natural renewable resources. [USQ Project]

Coulter, Allison Kerrie-Anne (2009) Use of Fiber Bragg grating sensors in structural health monitoring. [USQ Project]

Crone, Jeffrey John (2009) Alternate pavement types on reactive soils in the Ipswich Council area. [USQ Project]

Cunningham, Mitch (2009) Profiling coal on a conveyor belt for the automation of a train loadout facility. [USQ Project]

D

Dakers, Nicole (2009) A cost benefit analysis of rural residential water supply – constant flow vs. full pressure. [USQ Project]

Dann, Jeffrey Michael (2009) Modernisation of an existing irrigation area. [USQ Project]

Davis, Kieren Peter (2009) Application of an urban runoff model using surface specific parameters. [USQ Project]

Day, Anthony (2009) Investigation into the causes and possible remedies for the registered surveyor shortage in regional Queensland. [USQ Project]

Deas, Scott (2009) The accuracy of published co-ordinates on the 'Survey Mark Enquiry Service’(SMES)in Victoria using GPS observations. [USQ Project]

Douglas, Nadine Sarah (2009) Development of an asset maintenance program for Darwin City Council. [USQ Project]

Drew, Aaron Matthew (2009) DEA control interface, power system analysis, synchronisation and load management controls - design, construction and commissioning. [USQ Project]

Dunwoody, John Ernest (2009) Detection of Greater Bilby (Macrotis lagotis) habitat in South-West Queensland using remote sensing imagery and geographic information systems. Coursework Masters thesis, University of Southern Queensland. (Unpublished)

de Nooyer, Karen M. (2009) Content and construct validity of the Health of the Nation Scale for Children and Adolescents (HoNOSCA). Doctorate (other than PhD) thesis, University of Southern Queensland. (Unpublished)

E

Eckard, Lawrence Francois (2009) Setting up an engineering asset management system for a small local government council. [USQ Project]

Eddine, Mustapha Jamal (2009) Measurement of fracture toughness, mechanical and electrical loss tangents of calcium carbonate reinforced vinyl ester composites. [USQ Project]

F

Fitzhenry, Ryan (2009) Design and develop virtual reality games utilising the 'anti‐gravity' arm support for stroke rehabilitation therapy. [USQ Project]

G

Garratt, Blythe Jonathan (2009) The development of a wrist rehabilitation device for movement therapy. [USQ Project]

Goodwin, Brent (2009) Analyse original marks and occupation used to reinstate boundaries for identification surveys. [USQ Project]

Gould, Nicholas (2009) Conceptual design of a sustainable energy-waste solution for the residential sector. [USQ Project]

Grimm, Justin John (2009) Electromagnetic linear actuator - design, manufacture and control. [USQ Project]

H

Hayden, Nicola H. (2009) The impact of Australian classical music record labels on the Australian music scene. Coursework Masters thesis, University of Southern Queensland. (Unpublished)

Hopson, Matthew (2009) SCADA and RFI interference on RTK surveys. [USQ Project]

Hosking, Alan (2009) Investigation into the effectiveness of reflectorless technologies on structural surveillance monitoring. [USQ Project]

Houghton, Richard (2009) Impact of tailings subsidence on rehabilitated landform erosional stability. [USQ Project]

Howarth, Rowan (2009) Design and documentation of Bairnsdale regional landfill - Cell 3 Johnston’s Road, Bairnsdale. [USQ Project]

Hugo, Sarah (2009) Simulation and analysis of MIMO-OFDM for a 4G cellular network. [USQ Project]

Huq, Rezwanul (2009) Flexural strength of three types of glass powder reinforced vinyl ester composites. [USQ Project]

J

Jeffery, Simon (2009) Review of failure mode, effect and criticality analysis (FMECA) on major equipment of the crushing and screening plant at the BORAL Quarry at Ormeau, Queensland. [USQ Project]

Jones, Adam (2009) Enabling voice calls via a wireless broadband router. [USQ Project]

Jones, Jeffrey Francis (2009) Comparison of robotic total stations for scanning of volumes or structures. [USQ Project]

Jordan, Benjamin W. D. (2009) A touch-screen controlled 'Linear Predictive Synthesizer' for accessibility applications. [USQ Project]

K

Kinast, Matthew (2009) Real-time data transmission and control of a Neocot over the internet. [USQ Project]

Kirsch, Joshua (2009) Design of a small wind turbine for electric power generation(1-5kW). [USQ Project]

Korowa, Geoffrey (2009) Fracture toughness of glass powder reinforced vinyl ester resin. [USQ Project]

Koschel, Michael (2009) Investigation into reliability of AUSPOS coordinate data (specifically height). [USQ Project]

Kuan, Siew Yeng (2009) Design, construction and operation of the floating roof tank. [USQ Project]

L

Langdon, Aaron G. (2009) Traffic induced moisture entry into road pavements. [USQ Project]

Lascalles, Alex (2009) Potential impact of rising sea level on land ownership and government planning. [USQ Project]

Ling, Damian James (2009) Investigation of the Riegl terrestial scanners - uses and limitations. [USQ Project]

Louth, Sharon (2009) Creating web–based resources to assist teachers in increasing the quantity and quality of opportunities for children to participate in physical activity and promote health and well-being in schools. Coursework Masters thesis, University of Southern Queensland. (Unpublished)

Lyle, Nathan Ross (2009) Comprehensive design charts for the footing on slope problem. [USQ Project]

M

Manthey, Nathan William (2009) Environmentally friendly natural fibre composites with Qld. based vegetable oils. [USQ Project]

Maruping, Pako (2009) The design and construction of a large scale-force feedback joystick for the use in physiotherapy. [USQ Project]

Mayen, David Ayuen (2009) Composites from natural renewable resources in civil engineering: Epoxidized vegetable oil with epoxy resin, fly ash and sawdust fillers(mechanical, physical and structural properties). [USQ Project]

McMahon, Craig Andrew (2009) Investigation of the quality of water treated by magnetic fields. [USQ Project]

Mead, Stuart (2009) Numerical modelling of horizontal flow in sand filters. [USQ Project]

Milne, G. (2009) Airframe development and flight testing for entry into the 2009 Outback Challenge. [USQ Project]

Mulliss, Michael Stephen (2009) A review of the application of adverse possession within the Torrens system of land regulation in Australia. [USQ Project]

Munro, Frazer (2009) Localised geoid modelling using GPS and precise levelling data. [USQ Project]

O

O'Shannassy, Geoffrey Mark (2009) Development of a driver training simulator for use by stroke patients. [USQ Project]

O'Shea, Darren (2009) Proposal to incorporate volumetric (three dimensional) subdivisions in Victoria. [USQ Project]

P

Parry, Aaron (2009) Remote aerial data acquisition and capture project (RADAC). [USQ Project]

Pickford, Christopher Ian (2009) Behaviour of laminated fibre composite sandwich girders. [USQ Project]

Plain, Matthew (2009) Behaviour of innovative fibre composite sandwich panels for structural applications. [USQ Project]

Porter, Hannah Elizabeth (2009) Involvement of older drivers at crashes at unsignalised and signalised intersections. [USQ Project]

R

Reinbott, Nigel (2009) A review and update of the supply chain documentation within Amcor Flexibles. [USQ Project]

Rennie, Tristan James (2009) The effect of vandalism on fibre composite structures. [USQ Project]

S

Sankowsky, Brendan (2009) Hydraulic conductivity response of soils to synthetic laundry greywater. [USQ Project]

Saunders, Michael Joseph (2009) Investigation of the relationship between experimental bridge piers and erosion within a flow. [USQ Project]

Scoines, Barry William (2009) Replacement of steam turbine drive with electric drive. [USQ Project]

Shears, Steven Edward (2009) Investigation of life cycle management of electromagnetic flow meters. [USQ Project]

Smith, Anthony Patrick (2009) Surveying and the law. [USQ Project]

Smith, Travis (2009) Ipswich City Council development assessment: streamlining the process. [USQ Project]

Summerville, Cameron (2009) Structural performance of low grade timber slabs. [USQ Project]

Supandy, Mohammed (2009) Life cycle assessment of ultra pure water plant in semiconductor industry. [USQ Project]

Surtees, Mark Stephen James (2009) Bathymetric survey of flooded open cast mine workings. [USQ Project]

T

Taylor, Alan Owen (2009) Investigation on the fatigue behaviour of pultruded fibre composites. [USQ Project]

Taylor, Benjamin Allan (2009) Improving accuracy of rainwater tank hydrologic yield estimation across Queensland. [USQ Project]

Taylor, Oliver John (2009) Market segmentation for improved efficiency of Ipswich water supply system. [USQ Project]

V

Vaipulu, Seini 'Ela Uatekini (2009) Design a prototype solar dryer for drying sea cucumber. [USQ Project]

W

Wady, Vaughan (2009) An investigation of land and property information (NSW) proposed E-Plan process of digital survey plan lodgement in LandXML format. [USQ Project]

Wall, Adrian (2009) The use of a terrestrial laser scanner in an open cut mining environment. [USQ Project]

Willisch, S. (2009) Programming Sun(TM)SPOTs (Small Programmable Object Technology) in Java(TM). [USQ Project]

Wise, Timothy Glen (2009) Error resilient H.264 coded video transmission over wireless channels. [USQ Project]

Wu, Chao di (2009) Investigate the best percentage by weight of glass powder, as fillers in phenolic resins by using tensile tests. [USQ Project]

Y

Yu, Yu Wah (2009) Pile driving analysis via dynamic loading test. [USQ Project]

Z

Zerbst, Samuel David William (2009) Temperature effects on a fibre reinforced polymer material. [USQ Project]

Zhong, Xiaoliang (2009) Tensile strength of sawdust reinforced vinyl ester composites. [USQ Project]