Items where Year is 2019

A

Alaoud, Huseen M. H. A. E. A. (2019) Testing Australian commercially available biodiesel properties, combustion, performance and emission characteristics. [USQ Project]

Alharbi, Faisal (2019) Design of a Brushless DC drive for unmanned aerial vehicles. [USQ Project]

Almuhaini, Hamad (2019) Adhesive wear of rubber in mining application under dry contact condition. [USQ Project]

Anderson, Liam Jacob Frylink (2019) The Effect of GFRP Bar Diameter on the Compressive Behaviour of Hollow Circular Concrete Columns with Hollow Composite Section. [USQ Project]

Andrews, Cameron (2019) Rolling Shear Properties of F2 Hybrid Pine used in Cross Laminated Timber (CLT). [USQ Project]

Armstrong, David (2019) Smart Model/Package for Home Based Solar Grid System Design. [USQ Project]

B

Ball, Jonathon (2019) Condition Monitoring using a Low Power Wide Area Network based on LoRaWAN. [USQ Project]

Beavis, Callum (2019) Comparison of Vertical Positional Uncertainties between AUSGeoid09 and AUSGeoid2020 in South East Queensland. [USQ Project]

Becker, Peter (2019) Home Based Solar and Battery Optimisation. [USQ Project]

Blundstone, Geoffrey (2019) Feasibility of improving cycle infrastructure in Fortitude Valley Brisbane. [USQ Project]

Braddon, Megan (2019) How might an underground working environment effect laser scan data when assessing Joint Roughness Coefficient, and is it feasible to use a mobile platform? [USQ Project]

Brisby, Michael (2019) What is the Impact of Light Rail on Pedestrian Mobility and Safety in a CBD – Case Study George Street, Sydney. [USQ Project]

Broad, Jacob (2019) Drag Force Analysis of Vehicle Roof Accessories. [USQ Project]

Brooker, Rob (2019) Real-Time Collision Avoidance for Programmable Machines from 3D Model Analysis. [USQ Project]

Browne, Nicholas Raymond (2019) Developing a model for the utilisation of auxiliary through lanes at signalised intersections. [USQ Project]

Bryant, Chantelle Kristen (2019) Readability levels and their impact on bestselling and award-winning fiction. Coursework Masters thesis, University of Southern Queensland. (Unpublished)

Buckley, Paul (2019) An investigation into the feasibility of micro scale pyrolysis powered by renewable energy. [USQ Project]

Byrne, Mitchell John (2019) Evaluation Of A Self-Built, Low-Cost, RTK UAV System To Produce Digital Elevation Models. [USQ Project]

C

Cassim, Ahamed Asraz Aslam (2019) Conceptual design of the non-assisted wheelchair, for improved functionality and ergonomics for public spaces. [USQ Project]

Channer, Liam (2019) Investigating Wave Rotor Performance Characteristics and Design for Air Pumping Applications. [USQ Project]

Chibvura, Charles (2019) A finite element investigation of Fluid Structure Interaction effects on dam safety performance of the proposed Batoka Dam during Seismic Excitation. Coursework Masters thesis, University of Southern Queensland. (Unpublished)

Colagiuri, Luciano (2019) Low-investment EMI pre-compliance for COTS technology insertion into submarine combat systems. [USQ Project]

Cook, Benjamin John (2019) Suitability of low-cost UAVs in surveying applications. [USQ Project]

Copley, Matthew Kevin (2019) Comparison between robotic total station reflector-less measurement and terrestrial laser scanning for building modelling. [USQ Project]

Cormick, Jacob (2019) Land Subsidence Detection and Monitoring Using InSAR in Australia. [USQ Project]

Cowling, Joel (2019) Redefining the intervention level for upgrading unsealed roads to sealed roads in Rural NSW, main focus, Parkes Shire Council. [USQ Project]

D

Daley, Dylan Craig (2019) The Use of Geopolymers for Stabilising Expansive Soils. [USQ Project]

Davis, Donnell R. (2019) The race between education and catastrophe: creating climate-sensitive cities. Doctorate (other than PhD) thesis, University of Southern Queensland. (Unpublished)

De La Rosa, Oscar Garrido (2019) Conversion of Cadastral Survey Information into LandXML Files using Machine Learning. [USQ Project]

Dinham, Aaron (2019) Management of unsealed roads in drought conditions. [USQ Project]

E

Easterbrook, Damian (2019) Single Spatial Sensor Control of Robotic Arms. [USQ Project]

Eberhard, Marek (2019) Overall Performance and Emission Effects of Light Naphtha Additives in a Diesel Engine. [USQ Project]

Egan, Joshua (2019) Detection and analysis of disruption or discontinuities to Continuously Operating Reference Stations (CORS). [USQ Project]

Elsasser, M. (2019) Optimised renewable generator schemes to improve the utilisation of network assets while maintaining safe operation of primary plant in accordance with the National Electricity Rules. [USQ Project]

F

Ferrari, Amy (2019) Feasibility of Remote Earth Monitoring for SWER Systems. [USQ Project]

Fiedler, Aaron (2019) Suitability of polyester-based thermoplastic polyurethanes as a fuel-resistant asphalt binder in flexible aviation pavement surfaces. [USQ Project]

Fisher, Matthew (2019) Condition Monitoring for Predictive Maintenance Purposes. [USQ Project]

G

Greenbank, Luke (2019) Determining the Effectiveness of Vortex Generators with regards to Automotive Applications. [USQ Project]

Gruber, Gregory William John (2019) Review of DJI Phantom 4 RTK for the Surveying Industry. [USQ Project]

H

Hobbs, Amy (2019) Measuring Changes in Sea Level Around Antarctica. [USQ Project]

Hobbs, Lisa Rose ORCID: https://orcid.org/0000-0001-5706-6674 (2019) Australasian paramedic attitudes and perceptions about continuing professional development. Coursework Masters thesis, Queensland University of Technology. (Unpublished)

Hooper, Jason (2019) Off-grid Solar Power Design and Battery Storage Optimisation. [USQ Project]

J

Jacobson, Matthew (2019) Validation of the SCS TR-55 method on Whangarei District Watersheds and Soil Types. [USQ Project]

Johnston, Grant (2019) Optimization of a SNCR/LN NOx Reduction System using Model Predictive Control. [USQ Project]

Jolley, Kim (2019) The Potential Impact of Autonomous Vehicles on Urban Form and Land Use in Sydney (CBD) - A Case Study. [USQ Project]

Jolly, Adam L. (2019) Determination of the optical properties of ion beam modified polymers. Honours thesis, University of Southern Queensland. (Unpublished)

K

Karaka, Jayden Manawa (2019) Investigation into the effects of stormwater attenuation within the lower third of a catchment on downstream waterways. [USQ Project]

Keily, Rhys (2019) Sewer inflow and infiltration for catchments with high rainfall and aging infrastructure. [USQ Project]

Krautz, Nathan (2019) Comparison of TLS to total station accuracy for tree parameter measurement in biomass estimation. [USQ Project]

Kuzniarski, Conan (2019) Remote Sensed Monitoring of Seagrass Cover in the Gippsland Lakes, Victoria, Australia. [USQ Project]

L

Lariviere, Bernard (2019) Investigation of Time of Concentration within a ballast track environment for efficient Storm Water Drainage. [USQ Project]

Lazarevic, Aleksandar (2019) Assessment of Automatic Target Recognition Against Manual Aiming in Conventional Establishment of Survey Control. [USQ Project]

Leckie, Cameron (2019) Improving infiltration modelling for crusting soils. [USQ Project]

Lee, Greg (2019) A Comparison Analysis into Flange Survey Techniques. [USQ Project]

Lu, Peter (2019) Investigating the life cycle costs of road culverts in difference asset management schemes. [USQ Project]

M

Martin, Brent (2019) Investigating what effect two face measurement has on Reflectorless EDM with respect to angle of incidence and determining the critical incident angle. [USQ Project]

Maruping, Pako Omogolo (2019) Flexural behaviour of Graphene-reinforced concrete beams. [USQ Project]

Mathews, Jared (2019) Low-cost Firmness Based Avocado Ripeness Tester. [USQ Project]

Matthews, Brendan Shane (2019) Flexural Investigation and Design of Stressed-Skin Panels With an Autoclaved Aerated Concrete (AAC) Core. [USQ Project]

McCorquodale, Glenn (2019) Soil Moisture and Nitrogen Estimation Using Plant Growth Statistics. [USQ Project]

McNamara, Peter (2019) The effect of wide centreline treatments on run-off-road left incidents on rural Queensland highways and potential for a review of road shoulder width guidelines. [USQ Project]

McTegg, Stephen (2019) A criteria based approach to unmanned aerial vehicle regulations. [USQ Project]

Mitchell, Riley Malcolm (2019) Investigation into the Influence of Double Bagging Processes on Co-cured Scarf Repairs. [USQ Project]

Mohajer, Arman (2019) Developing a model for sustainable IT infrastructure in a rural setting in Northern India. [USQ Project]

Montes, Juan (2019) Computer Model for Sensor-Less Daylight Harvesting. [USQ Project]

Morgan, Gene (2019) The effectiveness of energy recovery ventilators (ERV) for air conditioning systems in multi-purpose halls in North Queensland. [USQ Project]

Mpofu, Mkululi (2019) Impact of Large-Scale Solar Energy Penetration on the Electricity Network With a View of Replacing Synchronous Generators. [USQ Project]

Murad, Abdullah (2019) The experimental & simulation investigation of engine performance characteristics of conventional diesel and waste plastic fuel. [USQ Project]

N

Narayan, Sanjay (2019) Earthing Systems and Earth Fault Protection in Power System Distribution Network. [USQ Project]

Ng, Michael (2019) The Effect of Reinforcement Ratio on the Compressive Behaviour of Glass Fibre Reinforced Polymer (GFRP) reinforced Concrete Columns with Hollow Composite Reinforcing Section (HCRS). [USQ Project]

Nikolaidis, Alyssa (2019) The effects of athletic ideal versus diverse body ideal exercise videos on young women's body image, mood, and exercise motivation. Coursework Masters thesis, University of Southern Queensland. (Unpublished)

Noller, Lachlan (2019) Restart of a 2D Hypersonic Inlet a Mach 6 using Active Slot Flow Control. [USQ Project]

Nooriafshar, Darius (2019) Applying Systems Engineering Approaches to the Management of Electrical Engineering Projects. [USQ Project]

O

Oliver, Jarred (2019) Harmony Analysis in A'Capella Singing. [USQ Project]

P

Parker, Brent Alexander (2019) Optimisation for the Positioning of the Proposed Eurobodalla Southern Storage Future Water Treatment Plant. [USQ Project]

Phan, Thuong (2019) Structural Behaviour of Graphene-Epoxy Coated Timber Members. [USQ Project]

Plant, Emily (2019) Statistical comparison of additive regression tree methods on ecological grassland data. Honours thesis, University of Southern Queensland. (Unpublished)

Pont, Jason (2019) Autonomous navigation of a partially unknown environment. [USQ Project]

Prasad, Nirbhay (2019) Crusher Dust as Man Sand Replacement of Natural Sand. [USQ Project]

R

Regan, Darryl (2019) The Viability of Small-Scale Wind Turbines for Domestic Use in South East Queensland. [USQ Project]

Robertson, Samuel (2019) An investigation into the reduction of ongoing maintenance costs by sealing fullwidth on two-way, rural roads. [USQ Project]

Rowles, Mitchell (2019) Analysis of Influencing Factors of Construction Project Complexity from Different Stakeholders Perspectives. [USQ Project]

Rutherford, William (2019) Remembering Tin Town: identifying and valuing Aboriginal reserve sites of New South wales. Coursework Masters thesis, University of Southern Queensland. (Unpublished)

S

Sharkey, Luke (2019) Accuracy Assessment of the Riegl VMQ-­‐1HA Mobile Laser Scanner. [USQ Project]

Sharp, Clancy (2019) Sugarcane Yield Estimation by UAV Photogrammetry Survey. [USQ Project]

Smouha, Jonathan (2019) Independent Evaluation of the Leica GS18 T Tilt-Compensated GNSS RTK Rover. [USQ Project]

Strange, Enoch Matthew (2019) Monitoring survey of heritage listed fencing using terrestrial laser scanners and CloudCompare software. [USQ Project]

Swift, Alexander Robert John (2019) Conflict of Interest: The Dual-Role Superintendent / Lead Designer in Construct Only Contracts. [USQ Project]

T

Tabwere, Rimeta (2019) Investigating productivity of double slope solar still with sponge cubes. [USQ Project]

Tait, Matthew (2019) Methodology To Obtain Homogeneous Temperature Distribution Across A Revers Flow Offset Barbecue. [USQ Project]

Tan, Jacob (2019) Evaluation of Issues in Using Advanced and Sustainable Engineering Materials. [USQ Project]

Taylor, Simeon (2019) Preliminary design of a device to control the orientation of a 250Kg craned load around the vertical axis. [USQ Project]

Thomson, Sean (2019) Utilising a Mobile Device to Aid in Early Diagnosis of Corneal Abnormalities. [USQ Project]

Tomarchio, Mark Daniel (2019) Improved theory for the design of high-speed roundabouts to suit heavy vehicles. [USQ Project]

Train, Aidan (2019) Lot Infiltration Trenches Impacts on Water Quality. [USQ Project]

V

Venaglia, Michael (2019) Quantify and Explain the Differences in Horizontal Accuracies Between Commercial CORS Networks. [USQ Project]

Verrall, Jacob (2019) Performance Evaluation of GFRP Reinforced Railway Sleepers. [USQ Project]

Viero, Morgan (2019) Capacitive Voltage Transformer Monitoring and Failure Mode Analysis. [USQ Project]

W

Walker, Samuel (2019) Estimation of peak flow in Queensland using Quantile Regression Technique and ARR 2019. [USQ Project]

Wass, Jack (2019) Comparison of land vs floating evaporation pans to measure evaporation from dairy farm effluent ponds in the Waikato Region, New Zealand. [USQ Project]

Way, Erin (2019) Effects of Climate Change and Land Use on Rainfall and Management of Flooding in an Urban Coastal Catchment. [USQ Project]

Weedon, Brent (2019) Design and implentation of axial-flux permanent magnet machine for use in wind turbine applications. [USQ Project]

Whitby, Mathew (2019) Infill Development Impact on the Capacity of Regional Drainage Networks. [USQ Project]

Whittington, Mitchell (2019) Analysis of Mobile Laser Scanning (MLS) Ground Control Methods and Achievable Accuracies. [USQ Project]

Wood, Timothy (2019) Development of an Asset Prioritisation Framework for Gympie Regional Council’s Water and Sewerage Assets. [USQ Project]

Wright, Craig (2019) Chemically Bonded Excavator Bucket Redesign. [USQ Project]

Y

Yousif, Talal (2019) Renewable Alternative Fuel for Diesel Engine. [USQ Project]

Z

Zhou, Xuebo (2019) Pipeline Monitoring Surveys with Modern Technology. [USQ Project]