Items for Faculty/School / Institute/Centre :
Historic - Faculty of Health, Engineering and Sciences - School of Civil Engineering and Surveying (1 Jul 2013 - 31 Dec 2021)

Thesis (Non-Research)

Chibvura, Charles (2019) A finite element investigation of Fluid Structure Interaction effects on dam safety performance of the proposed Batoka Dam during Seismic Excitation. Coursework Masters thesis, University of Southern Queensland. (Unpublished)

USQ Project

Wilson, Stephanie (2022) Water Budgeting & Urban Water Demand Management in Townsville. [USQ Project]

Eager, Drew (2021) Investigation of Potential Benefits of BIM to Provide Efficiencies in the AEC Industry. [USQ Project]

Batstone, Seamus (2021) A review of smoke dispersion models for smoke pollution hazard mitigation associated with controlled, forest fuel reduction burns. [USQ Project]

Brisolin, Jacob (2021) Application of Automated Road Fault Detection for Improved Asset Maintenance Planning. [USQ Project]

Blessing, Benn (2021) Developing a software interface between Dräger Winaccess API and influxDB Time series database. [USQ Project]

Brian, Ashley (2021) Feasibility on Vertical Column Gravity Separation of Class O Fluids. [USQ Project]

Bell, Wayne (2021) Hydrologic Catchment Modelling to Supplement Potable Water Supply in Central Western NSW. [USQ Project]

Ball, Ryan (2021) Shear strength properties of sand with fines for various moisture contents. [USQ Project]

Bielefeld, Kristin (2021) Torsional Behaviour of Precast Concrete Planks Reinforced with Glass Fibre Reinforced Polymer Bars. [USQ Project]

Quinlivan, Patrick (2021) Albury Wodonga Bus Network Assessment Model. [USQ Project]

Somerville, Jarrod (2021) Alluvial Geology of North-West Sydney and its Impact on Development. [USQ Project]

George, Phillip (2021) An Investigation into design and construction of a leachate dam in Lismore. [USQ Project]

Young, Lauren (2021) Analysis of the Suitability of Roundabouts for Heavy Vehicles driving at High Speeds in Queensland. [USQ Project]

Heap, Harvey (2021) Behaviour of GFRP-Reinforced Precast Concrete Decks Under Uniform Loading. [USQ Project]

Thrower, Ryan (2021) BIM standardisation and its effect on project delivery in the Australian civil design and construction industry. [USQ Project]

Xeros, Saxon R. (2021) Comparative Evaluation of the In-Plane Shear Behaviour of GFRP Composite Wall Systems With and Without Window Openings. [USQ Project]

Reynolds, Brayden (2021) Design optimisation of drag struts for seismic and wind loading in multi-storied structures. [USQ Project]

Dixon, Andrew Peter (2021) Develop a framework for residential construction cost estimating in the Australian market. [USQ Project]

Reid, Amber Hope (2021) Development of an Innovative Flooring System for Residential and Light Industrial Buildings. [USQ Project]

Priebbenow, Aidan (2021) Effects of joining systems and sheathing on the in-plane shear behaviour of modular composite wall systems. [USQ Project]

Towers, Haley (2021) Evaluation of Signalisation as a Treatment for Roundabouts. [USQ Project]

Hollingworth, Leigh (2021) Evaluation of the Performance of Recycled Concrete Aggregate in Fresh Concrete for Manufacturing Fence Posts. [USQ Project]

Jadan, Dima (2021) Evaluation of the Suitability of Fibre Composites for Road Bridges. [USQ Project]

Whiting, Ella (2021) Fracture Toughness of Hybrid Hierarchical Honeycombs. [USQ Project]

Kellner, Nicholas (2021) Investigating Urban Stormwater Collection for Potable use; a Feasibility Study for Gloucester, NSW. [USQ Project]

Singh, Anshdeep (2021) Investigation on the properties of concrete with Expanded Polystyrene. [USQ Project]

Staats, Thomas Patrick (2021) Photogrammetry UAV and terrestrial LiDAR, A comparative review in Volumetric surveys. [USQ Project]

Smith, Callum (2021) Predictions for the Hydrological Performance of the Parua Stream Dam. [USQ Project]

Ruelcke, Chris (2021) Structural design and considerations of steel modularized and transportable substations. [USQ Project]

Wallis, Matthew (2021) The Efficiencies that Building Information Modelling (BIM) 3D Visualisation can provide the residential sector of the Australian Construction Industry. [USQ Project]

Browne, Thomas (2021) Resilience of Existing Drainage Networks to Climate Change Effects. [USQ Project]

Hundloe, Kyle (2020) An assessment of durability and mechanical properties of post-consumer polypropylene fibre reinforced concrete. [USQ Project]

Mbambe, Putumani (2020) An investigation of the key barriers preventing development of Small Medium Enterprises (SMEs) in the South African construction industry. [USQ Project]

Flores, Manuel (2020) Applying Urban Stormwater Modelling to Aquaculture Prawn Farm Effluent in Queensland. [USQ Project]

Thomson, Brendon (2020) Asset Management Planning for New Zealand Local Roads. [USQ Project]

Nowak, Adrian (2020) Building Information Modelling (BIM) and its adoption and effectiveness as a tool in the management of constructions projects in Australia. [USQ Project]

Vaughan, Patricia (2020) Case Study: Bring back 'the Gap'. [USQ Project]

Abougamil, Reda Abdelshafy Abouzied (2020) Causes of Delays and Disputes in the Saudi Arabian Construction Industry Compared with the Degree of Delays and Disputes in the UK Construction Industry. [USQ Project]

Cawdell-Smith, Jack H. (2020) Critical Factors Affecting Sustainability in Australian Civil Construction Industry: An Investigation into Sustainability Culture. [USQ Project]

Pfeiffer, Viktoria (2020) Dam water extraction analysis for Toowoomba under increasing demand. [USQ Project]

Whittering, Matthew (2020) Design and Evaluation of a Recirculating Aquaponic System. [USQ Project]

Grazioli, Haydn (2020) Developing an Asset Prioritization System for Hinchinbrook Shire Council’s Water and Sewerage Assets. [USQ Project]

King, Alexander (2020) Effect of Thermal Boundary Layer Below Water Surfaces on Evaporation. [USQ Project]

King, Mitchell (2020) Effective Corporate Social Responsibility for Australian SMEs (Small to Medium-Sized Enterprises) in the Building & Construction Industry. [USQ Project]

Chapman-Vagg, Kaz (2020) Effective Road Pavement Reconstruction in Fraser Coast Region QLD. [USQ Project]

Haywood, Chad (2020) Energy Return on Investment (EROI) of an Australian Wind Farm. [USQ Project]

van Neuren, Craig S. (2020) How Building Information Modelling software (BIM) is being used in the Architectural and Engineering (AE) industry and how the use of this software is impacted by the AE industries own understanding of BIM - A South East Queensland (SEQ) Perspective. [USQ Project]

Williams, Sally (2020) Influence of Water-Grout Ratio and Curing Time on Pull-Out Load of Rock Bolt Systems. [USQ Project]

Carson, Matthew Glenn (2020) Investigating the Beneficial Effects of Alternate Fines in Concrete. [USQ Project]

Visser, Tyson (2020) Investigation into the effect of partial cement replacement with waste ceramic powder on the brick-mortar bond. [USQ Project]

Brady, Milasari (2020) Investigation on Mechanical and Durability Properties of Recycled Concrete. [USQ Project]

Li, J. (2020) Land Preservation for Future TransportInfrastructure in Metropolitan Queensland. [USQ Project]

Erasmus, Vernon Marc (2020) Stability analysis on a fossil fuel ash dam using a 3D numerical method. [USQ Project]

Gadalla, Ahmed (2020) The Effects of Extreme Weather Events on Flexible Pavement. [USQ Project]

Lobwein, Mark (2020) The investigation of stormwater runoff by utilising a combination of green infrastructure in different sized urban residential catchment. [USQ Project]

Gwaya, Oswald (2020) The role of steel fibres on the compressive and tensile properties of concrete. [USQ Project]

Mendonca, Jessica (2020) To define and model meteorological drought in the Northern Agricultural Region of Western Australia. [USQ Project]

Stanford, Rawdon (2020) A comparison of 'AS/NZS 1170.2:2011 Wind Actions' and structural analysis software packages for design of structures. [USQ Project]

Maloney, Joshua (2020) Rural Catchment Modelling: Application in Ungauged Catchments. [USQ Project]

Tomarchio, Mark Daniel (2019) Improved theory for the design of high-speed roundabouts to suit heavy vehicles. [USQ Project]

Lee, Greg (2019) A Comparison Analysis into Flange Survey Techniques. [USQ Project]

McTegg, Stephen (2019) A criteria based approach to unmanned aerial vehicle regulations. [USQ Project]

Sharkey, Luke (2019) Accuracy Assessment of the Riegl VMQ-­‐1HA Mobile Laser Scanner. [USQ Project]

Robertson, Samuel (2019) An investigation into the reduction of ongoing maintenance costs by sealing fullwidth on two-way, rural roads. [USQ Project]

Rowles, Mitchell (2019) Analysis of Influencing Factors of Construction Project Complexity from Different Stakeholders Perspectives. [USQ Project]

Whittington, Mitchell (2019) Analysis of Mobile Laser Scanning (MLS) Ground Control Methods and Achievable Accuracies. [USQ Project]

Lazarevic, Aleksandar (2019) Assessment of Automatic Target Recognition Against Manual Aiming in Conventional Establishment of Survey Control. [USQ Project]

Copley, Matthew Kevin (2019) Comparison between robotic total station reflector-less measurement and terrestrial laser scanning for building modelling. [USQ Project]

Wass, Jack (2019) Comparison of land vs floating evaporation pans to measure evaporation from dairy farm effluent ponds in the Waikato Region, New Zealand. [USQ Project]

Krautz, Nathan (2019) Comparison of TLS to total station accuracy for tree parameter measurement in biomass estimation. [USQ Project]

Swift, Alexander Robert John (2019) Conflict of Interest: The Dual-Role Superintendent / Lead Designer in Construct Only Contracts. [USQ Project]

De La Rosa, Oscar Garrido (2019) Conversion of Cadastral Survey Information into LandXML Files using Machine Learning. [USQ Project]

Prasad, Nirbhay (2019) Crusher Dust as Man Sand Replacement of Natural Sand. [USQ Project]

Weedon, Brent (2019) Design and implentation of axial-flux permanent magnet machine for use in wind turbine applications. [USQ Project]

Egan, Joshua (2019) Detection and analysis of disruption or discontinuities to Continuously Operating Reference Stations (CORS). [USQ Project]

Browne, Nicholas Raymond (2019) Developing a model for the utilisation of auxiliary through lanes at signalised intersections. [USQ Project]

Wood, Timothy (2019) Development of an Asset Prioritisation Framework for Gympie Regional Council’s Water and Sewerage Assets. [USQ Project]

Way, Erin (2019) Effects of Climate Change and Land Use on Rainfall and Management of Flooding in an Urban Coastal Catchment. [USQ Project]

Walker, Samuel (2019) Estimation of peak flow in Queensland using Quantile Regression Technique and ARR 2019. [USQ Project]

Byrne, Mitchell John (2019) Evaluation Of A Self-Built, Low-Cost, RTK UAV System To Produce Digital Elevation Models. [USQ Project]

Tan, Jacob (2019) Evaluation of Issues in Using Advanced and Sustainable Engineering Materials. [USQ Project]

Blundstone, Geoffrey (2019) Feasibility of improving cycle infrastructure in Fortitude Valley Brisbane. [USQ Project]

Maruping, Pako Omogolo (2019) Flexural behaviour of Graphene-reinforced concrete beams. [USQ Project]

Matthews, Brendan Shane (2019) Flexural Investigation and Design of Stressed-Skin Panels With an Autoclaved Aerated Concrete (AAC) Core. [USQ Project]

Braddon, Megan (2019) How might an underground working environment effect laser scan data when assessing Joint Roughness Coefficient, and is it feasible to use a mobile platform? [USQ Project]

Smouha, Jonathan (2019) Independent Evaluation of the Leica GS18 T Tilt-Compensated GNSS RTK Rover. [USQ Project]

Whitby, Mathew (2019) Infill Development Impact on the Capacity of Regional Drainage Networks. [USQ Project]

Lu, Peter (2019) Investigating the life cycle costs of road culverts in difference asset management schemes. [USQ Project]

Martin, Brent (2019) Investigating what effect two face measurement has on Reflectorless EDM with respect to angle of incidence and determining the critical incident angle. [USQ Project]

Karaka, Jayden Manawa (2019) Investigation into the effects of stormwater attenuation within the lower third of a catchment on downstream waterways. [USQ Project]

Lariviere, Bernard (2019) Investigation of Time of Concentration within a ballast track environment for efficient Storm Water Drainage. [USQ Project]

Cormick, Jacob (2019) Land Subsidence Detection and Monitoring Using InSAR in Australia. [USQ Project]

Train, Aidan (2019) Lot Infiltration Trenches Impacts on Water Quality. [USQ Project]

Dinham, Aaron (2019) Management of unsealed roads in drought conditions. [USQ Project]

Hobbs, Amy (2019) Measuring Changes in Sea Level Around Antarctica. [USQ Project]

Strange, Enoch Matthew (2019) Monitoring survey of heritage listed fencing using terrestrial laser scanners and CloudCompare software. [USQ Project]

Parker, Brent Alexander (2019) Optimisation for the Positioning of the Proposed Eurobodalla Southern Storage Future Water Treatment Plant. [USQ Project]

Verrall, Jacob (2019) Performance Evaluation of GFRP Reinforced Railway Sleepers. [USQ Project]

Zhou, Xuebo (2019) Pipeline Monitoring Surveys with Modern Technology. [USQ Project]

Venaglia, Michael (2019) Quantify and Explain the Differences in Horizontal Accuracies Between Commercial CORS Networks. [USQ Project]

Cowling, Joel (2019) Redefining the intervention level for upgrading unsealed roads to sealed roads in Rural NSW, main focus, Parkes Shire Council. [USQ Project]

Kuzniarski, Conan (2019) Remote Sensed Monitoring of Seagrass Cover in the Gippsland Lakes, Victoria, Australia. [USQ Project]

Gruber, Gregory William John (2019) Review of DJI Phantom 4 RTK for the Surveying Industry. [USQ Project]

Andrews, Cameron (2019) Rolling Shear Properties of F2 Hybrid Pine used in Cross Laminated Timber (CLT). [USQ Project]

Keily, Rhys (2019) Sewer inflow and infiltration for catchments with high rainfall and aging infrastructure. [USQ Project]

Phan, Thuong (2019) Structural Behaviour of Graphene-Epoxy Coated Timber Members. [USQ Project]

Sharp, Clancy (2019) Sugarcane Yield Estimation by UAV Photogrammetry Survey. [USQ Project]

Cook, Benjamin John (2019) Suitability of low-cost UAVs in surveying applications. [USQ Project]

Fiedler, Aaron (2019) Suitability of polyester-based thermoplastic polyurethanes as a fuel-resistant asphalt binder in flexible aviation pavement surfaces. [USQ Project]

Anderson, Liam Jacob Frylink (2019) The Effect of GFRP Bar Diameter on the Compressive Behaviour of Hollow Circular Concrete Columns with Hollow Composite Section. [USQ Project]

Ng, Michael (2019) The Effect of Reinforcement Ratio on the Compressive Behaviour of Glass Fibre Reinforced Polymer (GFRP) reinforced Concrete Columns with Hollow Composite Reinforcing Section (HCRS). [USQ Project]

McNamara, Peter (2019) The effect of wide centreline treatments on run-off-road left incidents on rural Queensland highways and potential for a review of road shoulder width guidelines. [USQ Project]

Jolley, Kim (2019) The Potential Impact of Autonomous Vehicles on Urban Form and Land Use in Sydney (CBD) - A Case Study. [USQ Project]

Daley, Dylan Craig (2019) The Use of Geopolymers for Stabilising Expansive Soils. [USQ Project]

Jacobson, Matthew (2019) Validation of the SCS TR-55 method on Whangarei District Watersheds and Soil Types. [USQ Project]

Brisby, Michael (2019) What is the Impact of Light Rail on Pedestrian Mobility and Safety in a CBD – Case Study George Street, Sydney. [USQ Project]

Gibbs, Alexander (2018) Direct Volume Computation Using UAV Point Cloud Data & A Known DTM. [USQ Project]

Lilley, Andrew (2018) Effects of Chemically Treated Recycled Water on the Setting Process and Overall Behaviour of Concrete Beams. [USQ Project]

Barre, Christopher (2018) A Comparative Study of and Modern Techniques for Accurate Internal Space Measurements. [USQ Project]

Roberts, Andrew (2018) A study of the accuracy of oblique image capture in UAV Photogrammetry. [USQ Project]

Flood, Zack (2018) A Study on the Effect of External Parameters on Expansive Soils. [USQ Project]

Robertson, Alister (2018) A Sustainable Approach to Single Lot Residential Stormwater Disposal. [USQ Project]

Minchev, Grant (2018) A Sustainable Focus on Rural Town Main Streets & Highway Initiatives. [USQ Project]

Burgess, Liam P. (2018) Accurate 3-D Modelling from DSLR Images for Residential Design Purposes. [USQ Project]

Cook, Alex (2018) An Analysis on the Effect of Free Station Traversing on the Uncertainties Associated with Control Points, in both an Open and a Closed Traverse. [USQ Project]

Steel, Simon (2018) An Assessment of Elsholz Redirective Concrete Kerb on Road Safety. [USQ Project]

Ogilvie, Heath Stewart (2018) An Investigation Aimed at Improving Subsidence Monitoring by Combining LiDAR with Traditional Survey Methodologies. [USQ Project]

Scott, Cameron (2018) An investigation into an alternative on-site stormwater detention structure to increase capacity and reduce spatial footprint and economic impact. [USQ Project]

Smith, Lachlan (2018) An Objective Criteria for the Determination of Non-Tidal Riparian Boundaries in NSW. [USQ Project]

Hagan, Mark (2018) Analysis of Traffic Control Systems for better coordination of Traffic Signals. [USQ Project]

McLean, Aaron (2018) Analysis of Traffic Flow through Roundabouts for Improving Performance. [USQ Project]

Sands, Jeremy (2018) Automating Processes for Cross-checking Plans and Invert Levels for Laying Drainage Mains on Grade. [USQ Project]

Baker, Angel Lee (2018) Behaviour of GFRP Reinforced Concrete Railway Sleepers: Finite Element and Fibre Model Analyses. [USQ Project]

McMahon, Sean (2018) Camera-based plant sensing system for estimating crop maturity. [USQ Project]

Hughes, Brittany (2018) CBD Revitalisation - The Relationship Between Laneway Activation and Sense of Place. [USQ Project]

Singh, Hardeep (2018) Challenges in Project Management of Infrastructure Projects in Fiji. [USQ Project]

Campbell, Thomas (2018) Characteristics of Oil Contaminated Fine Aggregates in Concrete, Reinforced with Helix Micro-Rebar. [USQ Project]

Heslin, Terry (2018) Comparative evaluation of the axial behaviour of circular and square hollow concrete columns reinforced with GFRP bars. [USQ Project]

Singla, Prince (2018) Comparative study on precast concrete and cast in-situ reinforced concrete panels for building construction in Queensland. [USQ Project]

Fulton, David (2018) Comparison of the Practical Application of ARR1987 and ARR2016 for Urban Stormwater Catchments in Bundaberg. [USQ Project]

Calcutt, Ryan (2018) Contribution of Facilities Management Services to Green Building Rating Score. [USQ Project]

Finnerty, Sean (2018) Cooling of high temperature bore water using thermoelectric generated power. [USQ Project]

Curtis, Timothy Davidson (2018) Detecting and Mapping Crop Stress using Sentinel Remote Sensing Imagery. [USQ Project]

Stanton, Michael (2018) Developing a Maintenance Framework for Culverts. [USQ Project]

Power, Jay (2018) Development of an Asphalt Pavement Quality System. [USQ Project]

Cooper, Dean (2018) Development of Precast Concrete Boat Ramp Planks Reinforced with GFRP Bars. [USQ Project]

Benn, Joshua (2018) Differential Interferometric Synthetic - Aperture Radar (DInSAR) for disused mine subsidence monitoring and detection. [USQ Project]

Shu, Ji Linn (2018) DTM Accuracy Comparison Between Onboard RTK GNSS UAV versus Low Cost Quadcopter UAV at Different Geomorphological Sites: A Malaysian Approach. [USQ Project]

Oosthuizen, Alexandra L. (2018) Effect of Concrete Compressive Strength on the Behaviour of GFRP Reinforced Hollow Concrete Columns. [USQ Project]

Cole, David Michael (2018) Effect of intersection angle on a time-gap based intersection sight distance model. [USQ Project]

Evans, Michael (2018) Effects of varying ground water levels on laterally loaded bored piles. [USQ Project]

Thimios, Jace (2018) Evaluating the impact of new technology on construction project performance, methodologies and productivity: An insight into the forthcoming era of change projected for the construction industry. [USQ Project]

Lester, Trenton (2018) Evaluation of the Effect of Vegetation Sky Obstructions and Multipath on AUSPOS and Trimble CenterPoint RTX Post-Processing. [USQ Project]

Ginakis, Philip (2018) Evaluation of the Irrigation Hydraulics Assessor (IHA) as a Pipeline Behaviour Estimation Tool. [USQ Project]

O'Callaghan, Jack Maurice (2018) Evaluation of UAV vs Conventional Surveying methods in locating Waste Material at a Landfill site. [USQ Project]

Sami, Sanil V. (2018) Feasibility of Developing a Licensing Scheme for Fijian Contractors and Sub-Contractors. [USQ Project]

Hoskins, Paul Francis (2018) Identifying Rights, Obligations and Restrictions on Freehold Land in Queensland. [USQ Project]

Beff, Susan (2018) Impacts of Implementing High Efficiency Sediment Basins for Land Development Sediment Control within the Canberra Region. [USQ Project]

Bien, Robert (2018) Implementing a Combined Structural Design and Detailing Workflow to Improve Project Outcomes. [USQ Project]

Dlodlo, Nkomozombango (2018) Integration of Trimble V10 Imaging Rover on terrestrial survey. [USQ Project]

Sheriff, Bradley (2018) Investigating Scour Behaviour Around Culverts Using a Validated Numerical Model. [USQ Project]

Hadonou, Patient (2018) Investigating the maintenance costs and condition states of deteriorated small road structures. [USQ Project]

Becker, Keegan (2018) Investigation into the effect of materials and angle of incidence on reflectorless measurements. [USQ Project]

Davis, Wesley (2018) Leadership and the development of Local Government Engineering Managers. [USQ Project]

Coman, Aaron (2018) Linear Bending Behaviour of Functionally Graded Polymer Composite Beams Reinforced with Graphene Nanoplatelets. [USQ Project]

Pamogas, Nathan (2018) Long-term Flexural Performance of Epoxy-coated GFRP Composite Laminates. [USQ Project]

Weise, Matt Ryan (2018) Mechanical Behaviour of Wagners Composite Fibre Bridge Decking under Point Load Testing. [USQ Project]

Ebrahim, Zainab Alsayed (2018) Mechanical behaviours of grout mixed with fly ash for strata reinforcement. [USQ Project]

Lu, David (2018) Modelling Digital Cadastral Boundary for Building Subdivisions in Victoria. [USQ Project]

Franzen, Thomas (2018) Network Management of Low Volume Local Roads in NSW. [USQ Project]

Greene, Isaac (2018) Numerical Investigation on the Behaviour of Floodways Under Extreme Flood Events. [USQ Project]

Chung, Dennis Ming Tak (2018) Numerical investigation on the effect of scouring on the structural behaviour of corrugated steel culvert. [USQ Project]

Stahlhut, Madison (2018) Potential for Energy Generation using Pumped Storage Hydropower in the Toowoomba Water Supply. [USQ Project]

Gabriel, Kelly (2018) Potential of Softwood Engineered Timber with Graphene. [USQ Project]

Redenbach, Mitchell (2018) Practical Applications of Low-Cost Water Level Flood Early Warning Systems. [USQ Project]

Winter, Robert (2018) Quantifying errors in reflectorless electronic distance measurement for various environments. [USQ Project]

King, Charles (2018) Reducing Close Out Defects in Commercial Construction. [USQ Project]

Hyde, Justin (2018) Road Safety Research at Unsignalised Intersections within Wagga Wagga. [USQ Project]

Sansom, Benjamin (2018) RSPEC and Pavement conformance analysis using a photogrammetric mapping system from an UAV. [USQ Project]

Nash, Joseph (2018) Safety Benefits of Narrow Median Wire Rope Safety Barriers on Rural Highways. [USQ Project]

Bone, Cameron (2018) Shear Behaviour of Precast Concrete Beam with Hollow Composite Reinforcing Systems. [USQ Project]

Alenezi, Faisel M. H. A. A. (2018) Shear strength properties of low roughness rock joints. [USQ Project]

Fairhall, Thomas (2018) Slenderness Effect on the Behaviour of Hollow Circular Concrete Columns Reinforced with GFRP Bars. [USQ Project]

Gwalter, David (2018) Spatial Audit and Analysis of Cycling and Pedestrian Routes in Regional NSW. [USQ Project]

Kelly, Michael (2018) Survey and calculation of volumes of fined grained materials using ‘non-contact’ methods. [USQ Project]

Alfahed, Abdullah (2018) Tensile Strength Properties of Grout Products Commonly Used in Australian Civil and Mining Industries. [USQ Project]

Pedroza, Daniel (2018) Terrestrial Laser Scanners and its applications for pavement conformance in accordance to Roads and Maritime Services QA Specifications G71 – Construction Surveys. [USQ Project]

Fredericks, Beau (2018) Testing and Investigating the Angular Accuracy and Efficiency of the Trimble SX10 Camera Pointing System. [USQ Project]

Douglas, Scott (2018) The development of a systematic framework to guide the inspection process of levees, specific to the climatic and environmental conditions of rural Queensland. [USQ Project]

Mellor, Riley (2018) The Need for Real-Time Progress Reporting in Relation to Time, Cost and Quality. [USQ Project]

Bredenkamp, David (2018) The Readjustment of a Geological Coal Model Through Mapping an Open Cut Highwall Using UAV System to Generate Theoretical Boreholes. [USQ Project]

Blackburn, Ben (2018) The Survey Uncertainty of Existing Boundaries. [USQ Project]

Tanwangco, Christian (2018) The use of a Terrestrial Laser Scanner and Visual Alignment In Urban Cadastral Surveys. [USQ Project]

Schiller, Tianna (2018) Use of Dynamic Performances for Structural Health Monitoring of Concrete Structures. [USQ Project]

Whiteley, Jason (2018) Use of small sphere targets to georeference Terrestrial Laser Scan, Photogrammetry and Total Station point clouds within a rail corridor environment. [USQ Project]

Stephens, Kristopher (2018) Using Non-Infrared UAV Imagery To Assess The Health of Dairy Farming Pasture. [USQ Project]

Darr, Lachlan (2018) Utilisation of Turbo Roundabouts to Increase Safety at Existing Two-Lane Roundabouts in Queensland. [USQ Project]

Yong, Hwa Khai (2018) Waste Car Tyre Chips as Soil Stabilisers. [USQ Project]

Yerramsetti, Anoosha (2017) Optimization of Signal Timing for Improving Traffic Flow on a Highway segment using TRANSYT-7F. [USQ Project]

Bartlett, Luke (2017) An Accuracy Comparison between GPS Surveying and UAV Surveying on Seawall Monitoring. [USQ Project]

Bartolo, Jack (2017) 2+1 Rural Highway Treatments in Queensland, Australia. [USQ Project]

Davison, Andrew (2017) A comparative study of using an Unmanned Aerial Vehicle (UAV) in surveying projects. [USQ Project]

Hager, Marcus Timothy (2017) A Comparative Study on UAV Photogrammetry. [USQ Project]

Dark, Michael (2017) A comparison of mobile phone 3D images and total station data for spatial interpretation of structures. [USQ Project]

Champion, Scott (2017) A Cost Benefit Analysis of Vertical Measurement Tools for Differential Levelling. [USQ Project]

Wahbe, Martin (2017) A Qualitative Assessment of Close Range Photogrammetry for use in measuring Stratas/Stratums. [USQ Project]

Van Bael, Tammee (2017) An Accessibility Investigation of the Gold Coast Light Rail System. [USQ Project]

Pinkstone, Jared William (2017) An Investigation into the use of a RTK GNSS and a Digital Depth Sounder for Mapping a Tidal River Bed. [USQ Project]

McEvoy, Chris (2017) Analysis of Engineered Cementitious Composite Bond Strength for Grouting Reinforcement to Concrete Members. [USQ Project]

Lamont, Julian (2017) Analysis of the Accuracy of Emerging Consumer Photogrammetry Techniques. [USQ Project]

Harris, Matthew (2017) Assess the Viability of Aerial Baiting for Dingoes in South West Queensland Using GIS Based Weighted Linear Combination Modelling. [USQ Project]

Harris, Jesse (2017) Assessing the impacts of Multi-Combination Vehicles on Motorways. [USQ Project]

Karunaharan, Janahan (2017) Asset Management Modelling. [USQ Project]

Reibelt, Tyla (2017) Behaviour of concrete columns with different levels of steel corrosion and repaired with a composite Jacket. [USQ Project]

Pierini, Adrienne (2017) Chemical Stabilisation Alternatives for Marginal Materials Found Within the Cobar Region. [USQ Project]

Lawrence, Rachael (2017) Climate Projection of Extreme Sea Level Events Along the Queensland Coast. [USQ Project]

Porter, Jacob (2017) Compressive behaviour of reinforced concrete columns with a prefabricated fibre reinforced jacket. [USQ Project]

Kumar, Navneet Vishal (2017) Critical Factors Affecting Construction Productivity in Fiji. [USQ Project]

Thomson, Philip (2017) Design flood estimation based on GRADEX. [USQ Project]

Sondhi, Ankit (2017) Develop a policy to address the risk of rear-end crashes on high-speed rural road. [USQ Project]

Somasundaraswaran, Aruthra (2017) Development of Crash Modification Factors Using Selected Remedial Measures at Signalised Cross Intersections in Toowoomba. [USQ Project]

Knight, Richard L. (2017) Development of Low CO2 Durable Concrete Using Geopolymer and Related Chemically-Activated Cements. [USQ Project]

Baker, Kurt (2017) Effectiveness of Bitumen Emulsion as a Stabilisation Agent in Recycled Sealed Rural Roads. [USQ Project]

Everett, Lucas (2017) Effectiveness of Variable Speed Limit Control Devices in Queensland. [USQ Project]

Govan, Joel Blake (2017) Effluent Water Reuse for Townsville. [USQ Project]

Brigg, Hayden (2017) Estimation of Peak Design Discharges within the Mackay Region. [USQ Project]

Wickramasinghe, Manod (2017) Evaluation of DTM Accuracy Based on Different Flying Heights of UAV on a Uniform Surface. [USQ Project]

Truasheim, Nathanael (2017) Evaluation of the Emergency Vehicle Priority System on the Sunshine Coast. [USQ Project]

Marriott, Phillip (2017) Evaluation of Trimble Active Targets with an obstructed line of sight. [USQ Project]

Blades, Tyson (2017) Fatal crashes at T-junctions within New South Wales. [USQ Project]

Maguire, Brett (2017) Finite element simulation of a Sustainable Hybrid Sandwich Panel under bending using Strand7. [USQ Project]

Xeros, Alastair G. (2017) Flexural Behaviour of Precast Concrete Slabs Reinforced with Hollow Composite Systems. [USQ Project]

Kocoski, Micheal (2017) Future management of survey infrastructure within NSW. [USQ Project]

Stewart, Simon Hugh (2017) Future Trend of Retaining Walls in South East Queensland. [USQ Project]

Leggat, Nicholas Aiden (2017) Hydraulic Investigation into the Practical Applicability of the ISLEX Smart Siphon. [USQ Project]

Buckle, James (2017) Identification of Infiltration within Albury Sewerage Infrastructure. [USQ Project]

Chigondo, Brian (2017) Integration of a Light Rail Transit with Autonomous (driverless) Vehicles. [USQ Project]

Black, Jared (2017) Investigating the cause of Requests for Information (RFIs) in Civil Construction Projects. [USQ Project]

Haskard, Rhys (2017) Investigation into ICSM’s guideline for conventional traverse surveys. [USQ Project]

McDonnell, Jessica (2017) Investigation into the effects of microwave drying soil. [USQ Project]

Bahri, Nikita (2017) Investigation of methane production by anaerobic co-digestion of food waste, fats, oil & grease, and thickened waste activated sludge using Automatic Methane Potential Test System. [USQ Project]

Hignett, Logan John (2017) Investigation of the effect of Naturally Occurring Asbestos (NOA) on Civil Engineering Projects. [USQ Project]

Allen, David (2017) Laser Scanning, Reflectorless and Image Point Creation in the Built Environment. [USQ Project]

Gibbons, Benjamin (2017) Lifecycle costs and maintenance of gross pollutant traps for rural local government areas. [USQ Project]

Cain, Michael (2017) Management of Unsealed Roads within the Narrabri Shire Council Local Government Area. [USQ Project]

Alcorn, Matthew (2017) Mapping and Spatial Analysis of Land Cover Dynamics of Threatened Grassland Ecosystems in the Condamine River Catchment. [USQ Project]

Kong, Weibin (2017) Measuring tree DBH & height by using terrestrial laser scanner for forest management. [USQ Project]

Alkandari, Hamed (2017) Mechanical behaviours of grout for strata reinforcement. [USQ Project]

Seymour, Jeremy (2017) Mine Subsidence Survey by UAV and Photogrammetry. [USQ Project]

Campbell, Alexander (2017) Modelling alternate approaches for calculating friction head loss in water distribution pipelines. [USQ Project]

Kingston, Mitchell (2017) Monitoring the Progress of Mine Site Vegetation Rehabilitation Using Satellite Imagery. [USQ Project]

Godwin, Joshua (2017) Multi-Stations, Trimble SX10 laser scanning applications, capabilities and relevant accuracies. [USQ Project]

Nichol, Matthew (2017) NSW Control Network: User Errors vs Network Errors Using CORSNet New South Wales. [USQ Project]

Crossen, Megan (2017) On-Farm Management Practices on Nutrient Pollution Control and an Impact Assessment on Water Quality. [USQ Project]

Richardson, Simon (2017) Optimal Erosion Weir Design Selection. [USQ Project]

Haniotis, Tyson (2017) Performance of High Strength Crumb Rubberised Concrete. [USQ Project]

McLeod, Julia (2017) Performance of water sensitive urban design bioretention installations on the Gold Coast. [USQ Project]

Arnold, Trent (2017) Performance Rating of Residential Builders. [USQ Project]

Almutairi, Torki A. M. A. R. Z. (2017) Properties of Cement and Geopolymer Mortars Reinforced with Glass Fibres. [USQ Project]

Kidd, Andrew (2017) Redesign of Brisbane City Council's Type 3 Asphalt and Development of Mix Specific Flexural Master Curves. [USQ Project]

Borzou, Rahmin (2017) Rehabilitation of Timber Bridge Piles with Splitting Failure Mechanism. [USQ Project]

Martin, Jackson John Raymond (2017) Reliability of Internal Co-ordinate Quality Indicator Values for Trimble RTK GNSS measurements. [USQ Project]

May, Andrew William (2017) Renewable energy generation potential of stormwater detention basins. [USQ Project]

Pollock, Denver (2017) Residual Chlorine Improvement in Woodhill Water Supply Zone. [USQ Project]

Walsh, Alec (2017) Road Ice Skid Resistance Treatments on Upper Natone Road, Tasmania. [USQ Project]

Martin, James (2017) Road network improvement and maintenance strategy for the Port of Burnie. [USQ Project]

Paige, Callan (2017) Roadwork signage analysis and general road user driving behaviour through construction sites. [USQ Project]

Ryan, Meredith (2017) Stormwater Management Solutions for Flat Terrain. [USQ Project]

Quihampton, William (2017) The effect of flight height, image overlap and the number of GCPs used on the accuracy of an aerial photogrammetry survey over a road surface, with an assessment of the suitability of aerial photogrammetry for road conformance testing. [USQ Project]

Wellings, Mansell (2017) The effect of high powered ultrasonic treatment on an Australian anaerobic digester. [USQ Project]

Almeshkhas, Abdullah (2017) The Factors that Affect the Labour Productivity in Construction in Kuwait in the Residential Sector. [USQ Project]

Almeshkhas, Abdullah (2017) The Factors that Affect the Labour Productivity in Construction in Kuwait in the Residential Sector. [USQ Project]

Drake, Michael (2017) The Introduction of a Rural Enhanced Auxiliary Left-turn (EAUL) Treatment at Geometrically Constrained Locations in NSW. [USQ Project]

Flynn, Julian (2017) The use of Nearmap Imagery in Two Dimensional Topographic Surveying Applications. [USQ Project]

Clark, Renai (2017) To seal or not to seal in Kingborough? [USQ Project]

Abernethy, Toby (2017) Understanding the relationship between Quality and Cost (and to a lesser extent Time) in construction projects, with the aim of preventing the occurrence of Quality problems. [USQ Project]

Biviano, Jordan James (2017) Using Stereo Images from an Imaging Total Station to Autonomously Produce 3D Real World Coordinates. [USQ Project]

Tingle, Leigh Robert James (2017) Evaluation of Unmanned Aerial Vehicle (UAV) Data Accuracy for the Surveying Profession. [USQ Project]

Senjalia, Ankit Haresh (2017) Relationship and other Advanced Contracting Processes. [USQ Project]

King, Matthew (2016) An investigation into the potential benefit/value of Ipswich CBD residential revitalisation. [USQ Project]

King, Job (2016) Behaviour of concrete with oil contamination and reinforced with fibres. [USQ Project]

Miller, James (2016) Examining the Hansen Global Forest Change (2000 - 2014) dataset within an Australian local government area. [USQ Project]

Archbold, Scott (2016) An investigation into the accuracies and limitations of different methods of connecting to datum. [USQ Project]

Pettersson, Declan (2016) 3D hydrologic features mapping with imaging rover. [USQ Project]

Redding, Bradley (2016) 3D modelling for surveying projects using unmanned arial vehicles (UAVs) and laser scanning. [USQ Project]

Davis, Aaron (2016) A civil engineering feasibility study on a sustainable pumped hydroelectricity plant at Wivenhoe. [USQ Project]

Dhakal, Bibek (2016) A trade-based approach for defects management in residential construction. [USQ Project]

Lowry, Mark (2016) A validation of the model for effluent disposal using land irrigation (MEDLI). [USQ Project]

Noon, Jarred (2016) An assessment of the deceleration on horizontal curve component of the Austroads operating speed estimation model. [USQ Project]

Boylan, Richard (2016) An evaluation of the performance of two different global satellite navigation systems, Trimble’s CenterPoint RTX and a conventional network RTK system. [USQ Project]

Mccullagh, Harry James (2016) An investigation of the predictive accuracy of salinity forecast using the source IMS for the Murray-Darling river. [USQ Project]

Stainwall, Haren (2016) Analysis of culverts during extreme flood events. [USQ Project]

Richardson, Megan (2016) Analysis of road crashes at roundabouts in Toowoomba. [USQ Project]

Milton, Ross (2016) Analysis of road safety trends at signalised intersections in Toowoomba. [USQ Project]

Rusconi, Luke (2016) Analysis of steady state vs dynamic modelling of groundwater mounding in development areas in WA. [USQ Project]

Carson, Bradley (2016) Analysis of wall formwork in the Australian multi-storey construction industry. [USQ Project]

Baker, Trent (2016) Analysis on the behaviour of FRP reinforced concrete railway sleepers. [USQ Project]

Robertson, Thomas (2016) Application of MODIS and Google earth data to assess the health of the Mitchell grasslands through web based GIS. [USQ Project]

Zador, Tari (2016) Assessing spatial mismatch patterns in the Gold Coast. [USQ Project]

Watson, Liam Douglas (2016) Asset condition monitoring of Gympie regional council’s road network. [USQ Project]

Wiya, Robert (2016) Behavior of concrete when using RAP (Reclaimed Asphalt Pavement) as a coarse aggregate material. [USQ Project]

Broome, Lachlan (2016) Comparison between terrestrial close range photogrammetry and terrestrial laser scanning. [USQ Project]

Sutcliffe, Wayne (2016) Design of a truss bridge for low cost using structural topology optimisation. [USQ Project]

Lister, James (2016) Design of high modulus asphalt overlay for concrete pavements. [USQ Project]

Wilson, Matthew (2016) Deterioration of timber bridges using a Fault Tree Analysis. [USQ Project]

Nankervis, Gary A. (2016) Development of a computer simulation for scouring around bridge piers. [USQ Project]

Jackson, Scott (2016) Development of a sustainable footpath material using recycled road profile, natural soils and PolyCom stabilising aid. [USQ Project]

Priest, Andrew James (2016) Development of stormwater asset management plan for local council. [USQ Project]

Lazzarini, Sarah-Jane (2016) Development stages of a road management strategy suitable to the Burdekin shire. [USQ Project]

McDonnell, James (2016) Effect of time interval variations on network RTK in a high multipath environment. [USQ Project]

Cuckson, Christopher (2016) Effectiveness of the Wide Centreline Treatment on two-way rural roads. [USQ Project]

Cuell, Jonathan (2016) Effects of on-site detention systems on urban drainage catchments. [USQ Project]

Gauld, Jason Andrew (2016) Energy & carbon audit of the Scenic Rim Regional Council. [USQ Project]

James, Jake (2016) Evaluation of the use of safety barriers on roundabouts. [USQ Project]

Farahbakhsh, Iman (2016) Finite element modelling of a sustainable hybrid natural fibre sandwich panel under bending. [USQ Project]

McLinden, Joshua (2016) Functional design report: Corry’s road sewerage augmentation. [USQ Project]

Freeman, Belinda (2016) Future public transport options for Toowoomba for the next twenty years. [USQ Project]

Peng, Zhuohao (2016) Geodesic dome structural analysis and design. [USQ Project]

Collins, Matthew (2016) Identification of the spectral signature of noxious weed St. John’s wort and development of a tracking methodology via remote sensing. [USQ Project]

Smith, Benjamin James (2016) Identifying best practice pavement design for an unsealed road network to achieve sustainability improvements. [USQ Project]

Mear, Benjamin (2016) Improving design standards for passing lanes on rural highways in Queensland. [USQ Project]

Williams, Alexander (2016) Improving Queensland speed zoning practices. [USQ Project]

Richardson, Joseph (2016) Improving the transition of a successful tender from estimating to project management phases. [USQ Project]

Tippett-Whiteman, Austin (2016) Integrating scheduling with quality to minimise defects in construction. [USQ Project]

Thompson, Zaine (2016) Integration of Trimble V10 imaging rover with R10 GNSS receiver for data collection under dense tree canopies. [USQ Project]

Rosnell, Alexander (2016) Investigating design and construction issues for precast concrete bridge over Bookookoorara creek. [USQ Project]

Heath, Brendon (2016) Investigation into the flexural characteristics of cold formed steel filled with rubberised concrete. [USQ Project]

Lynch, Joshua David (2016) Investigation of dam wall deformation surveys. [USQ Project]

Cherry, Rebecca (2016) Investigation of road wearing surface systems for glue laminated softwood timber bridge decks. [USQ Project]

Chou Pei-Chen, Peggy (2016) Investigation of scour mitigation methods for critical road structures. [USQ Project]

Taylor, David (2016) Modelling supply channel seepage and analysing the effectiveness mitigation options. [USQ Project]

Verrall, Daniel Graham (2016) Modelling water allocation increases using climate predictions. [USQ Project]

Lund, Nicholas (2016) Optimisation of long line GNSS networks using Geoscience Australia’s AUSPOS service and static baselines. [USQ Project]

Beaumont, Matthew (2016) Pacific highway glenugie: case study of the use of heavy duty granular pavement in northern NSW. [USQ Project]

Hathaway, Samuel B. (2016) Real world 3D accuracy achievable of Australian standard 5488-2013 classification of subsurface utility information using electromagnetic field detection. [USQ Project]

Mepham, Matthew (2016) Recent trends of stabilisation methods: a case study for rural roads by councils in the New England region of NSW. [USQ Project]

Hafey, Matthew (2016) Reduction of fertiliser losses in agriculture. [USQ Project]

Russell, Stephen (2016) Review of shared zones as a solution to grade and space restrictive residential streets. [USQ Project]

Cohen, Jethro (2016) Review of timber bridge maintenance practices on Queensland state controlled road networks. [USQ Project]

Adams, Justin Mitchell (2016) Risk management in the construction of communication towers. [USQ Project]

Kohler, Jarred (2016) Soil stabilisation in road pavements. [USQ Project]

Evans, Michael (2016) Species distribution modelling of the Glossy Black Cockatoo in Queensland’s Condamine region. [USQ Project]

Bell, Alexander (2016) Stability analysis of shallow undrained tunnel heading using finite element limit analysis. [USQ Project]

Fraser, Andrew (2016) Study of blast effects on structures. [USQ Project]

Shrestha, Suman (2016) Study of effects of coarse grain contents on Atterberg limits and expansiveness of the clay. [USQ Project]

Petersen, David (2016) Studying the effects of non-uniform stress distributions on soil heave. [USQ Project]

Jelacic, Antonio (2016) Terrestrial laser scanner for 3D modelling of USQ Toowoomba campus. [USQ Project]

Anderson, Elizabeth (2016) The application of visualisation techniques for stratum and strata boundaries within the New South Wales digital cadastre. [USQ Project]

James, Jeffrey (2016) The effect of materials and conditions on reflectorless electronic distance measurements from a Total station. [USQ Project]

Poulton, Ashley (2016) The effect of resurfacing on the lateral resistance of narrow gauge low profile concrete sleepers. [USQ Project]

Roberts, David (2016) The effects of control point shape and distribution in the creation of a numeric cadastral data base. [USQ Project]

Pease, Adam (2016) The impacts construction traffic has on pavements within residential subdivisions. [USQ Project]

Woolley, Reece (2016) The performance evaluation of bridge culverts reinforced with GFRP bars. [USQ Project]

McFadden, Patrick (2016) Tidal predictions in ungauged estuaries for boat-ramp access windows. [USQ Project]

Skehan, Ned (2016) Towards two-dimensional infiltration measurement in complex and variable soil environments. [USQ Project]

West, David (2016) Tracking machinery to investigate the effect of compaction during sugar cane harvesting. [USQ Project]

Breinl, Anton (2016) UAVs in pipeline design and rehabilitation of construction corridors. [USQ Project]

Costello, Brad (2016) Underground check survey. [USQ Project]

Brennan, Matthew Aaron (2016) Use of recycled concrete and lime to improve marginal subgrades in the Toowoomba Regional Council. [USQ Project]

Hawkins, Jared (2016) Using engineering cementitious composites as an adhesive for near-surface mounted FRP bars strengthening concrete/masonry structures. [USQ Project]

Smith, Cameron (2016) Utilisation of rice husk ash and fly ash as a partial replacement for cement in self-consolidating concrete. [USQ Project]

McCarthy, William (2016) Validation of commercial precision spraying technology. [USQ Project]

Gann, Nicholas (2016) Visualisation of a 3D cadastre using terrestrial laser scanning. [USQ Project]

Alenezi, Fahad T. A. S. M. (2016) Workability and compressive strength of eco-friendly concrete based on waste ceramic particles. [USQ Project]

Keightley, Anthony J (2016) A numerical investigation into sinkhole formation. [USQ Project]

Bein, Vincent (2015) Effect of time interval variations on RTK derived distances. [USQ Project]

Smith, Mitchell (2015) Southeast Queensland storm tide response to ex tropical cyclone Oswald. [USQ Project]

Pearson, Kelly (2015) Feasibility of improved traffic flow on Cohoe Street, Toowoomba by intersection improvements. [USQ Project]

Browne, Michael Charles (2015) Recycled rubber access cover riser. [USQ Project]

Green, Matthew (2015) Uniformity performance of non-standard overlapped center pivot and lateral move sprinklers. [USQ Project]

Strack, Anita Leigh (2015) A review on Australian mine haul road design procedures. [USQ Project]

Fitzgerald, Samuel Jesse (2015) An assessment of rural road network resilience as a critical infrastructure for coal seam gas development in regional Queensland. [USQ Project]

Pathiranage, Thilini (2015) Analysis of bridge failure due to Cyclone Marcia in Central Queensland using fault tree method. [USQ Project]

Patterson, Melanie (2015) Building Information Modelling: an explorative study. [USQ Project]

Kilpatrick, Glen R (2015) DEM generation and hydrologic modelling using LiDAR data. [USQ Project]

Fairley, Melissa (2015) Investigation of seepage in water supply distribution channels in St George, Queensland. [USQ Project]

Eaton, John (2015) Investigations into the effect of contaminants on permeable concrete effectiveness during its life cycle. [USQ Project]

Couch, Greg (2015) Key infrastructure review (Newcastle, NSW) vulnerability to a Tsunami. [USQ Project]

Fleming, Desmond James (2015) Object-oriented image analysis of cotton cropping areas in the Macintyre Valley using satellite imagery. [USQ Project]

Cook, Garth Anthony (2015) On-site detention methods & the cumulative effect. [USQ Project]

Beutel, Amy (2015) Optimal mix design for epoxy resin polymer concrete. [USQ Project]

Wager, Thomas (2015) Planning support systems for complex infrastructure development. [USQ Project]

Moes, Denika (2015) Power-Law flood frequency analysis of selected Queensland stream gauges. [USQ Project]

Sparksman, Peter John (2015) Quantifying the time and cost associated with the Request for Information (RFI) OR Technical Query (TQ) process - a designers perspective. [USQ Project]

Price, David (2015) Sustainable road development and management. [USQ Project]

Braden, Ashleigh (2015) The effect of fibres on the properties of concrete with oil contaminated sand. [USQ Project]

West, Jared (2015) Transitioning roadways from high-speed to low-speed environments when approaching regional towns in North Queensland. [USQ Project]

Rizzo, Giuseppe Ferdinando (2015) Use of biochar geostructures for urban stormwater water cleanup. [USQ Project]

Nash, Lachlan (2015) A review of warrants for traffic barriers in divided carriageway medians. [USQ Project]

Paul, Gregory (2015) An evaluation of traffic calming devices for major highways passing through rural Australian communities. [USQ Project]

Raleigh, Andrew (2015) How to mitigate the effects of scour on bridge piers through the use of combined countermeasures. [USQ Project]

Pescod, Rhys (2015) Improvements to the calibration of Electronic Distance Measurement Equipment (EDME). [USQ Project]

Belbin, Heidi (2015) The use of low-cost photogrammetry techniques to create an accurate model of a human skull. [USQ Project]

Mattsson, Bradley I (2015) The identification of all rights, obligations, and restrictions on freehold land in South Australia. [USQ Project]

Diffin, Luke (2015) Own identification of contributing factors for the success of toll roads in Australia under Public Private Partnerships. [USQ Project]

Wilson, Aaron P (2015) Establishing a mix design procedure for Geopolymer concrete. [USQ Project]

Robinson, Adam (2015) A study into the behaviour of FRP bolted connections. [USQ Project]

Kerr, James (2015) Dynamic response testing method of damage detection in fibre composite structures. [USQ Project]

Salonen, Marcus (2015) Prediction of timber bridge girder strength and stiffness using stress wave analysis. [USQ Project]

Hancock, Craig Ross (2015) Own mechanism for solving disputes over retaining walls near property boundaries. [USQ Project]

Kelderman, Simon (2015) Using a sprinkler infiltrometer and the GAML model to predict moving sprinkler performance in the field. [USQ Project]

Hooson, Mitchell D (2015) A comparison of the limitations and accuracy of both obstructed prism and obstructed non-prism measurements. [USQ Project]

Hancock, Robert John (2015) An investigation into LandXML for implementation of 3D Cadastre in eSurvey. [USQ Project]

Purvis, Alan (2015) An investigative study of road construction contract variations. [USQ Project]

Porter, Simon (2015) Analysing geotechnical aspects of concrete pipe culverts. [USQ Project]

Jordan, Bradley (2015) Analysis of bridges subjected to flood loadings based on different design standards. [USQ Project]

Walker, Scott (2015) Analysis of the behaviour of composite transom decks for railway bridges. [USQ Project]

Butler, Michael (2015) Asset management framework for NSW local government. [USQ Project]

Robertson, Matthew (2015) Circular geopolymer concrete columns with composite rebars. [USQ Project]

Cormick, Adam (2015) Comparing different heating methods for determination of moisture content in soils. [USQ Project]

Alsinan, Abdulaziz (2015) Conductivity of wall materials based on natural fiber. [USQ Project]

Linnan, Nicholas (2015) Creating a performance management system for contractors to assess subcontractors. [USQ Project]

Murdoch, Robert (2015) Creating a simplified model of the Alkali-Silica Reaction in concrete by utilising finite element modelling techniques. [USQ Project]

Olsen, Campbell (2015) Development and execution of asset criticality framework: a study of water and wastewater infrastructure at Toowoomba Regional Council. [USQ Project]

Tunnah, Patrick (2015) Diversion of stormwater first flush: an alternative method of managing pollution to urban waterways. [USQ Project]

Ford, Joseph (2015) Effect of environmental surroundings on accuracy and precision of total station measurements. [USQ Project]

Timms, Ashlii (2015) Effects of elevated temperature and simulated environmental conditions on the properties of epoxy based polymer resin. [USQ Project]

Ismail, Wafeek (2015) Evaluating the differences and accuracies between GNSS applications using PPP. [USQ Project]

Davey, Wade (2015) Evaluating the effectiveness of Intelligent Transport Systems at reducing speeds through roadwork sites in Australia. [USQ Project]

Tobler, Jake P (2015) Evaluation of EverFE software for designing Australian concrete pavements. [USQ Project]

Evans, Jesse Troy (2015) Evaluation of photogrammetric measurements obtained using imaging rovers and imaging theodoli. [USQ Project]

Farrugia, Daniel (2015) Evaluation of signalised intersections in NSW with right turn filters. [USQ Project]

Asghar, Muhammad Athar Aqeel (2015) Evaluation of strength characteristics of recycled bituminous pavement materials. [USQ Project]

Maskall, Jonathon (2015) Exploration of evaporation mitigation measurement techniques. [USQ Project]

Collier, Shane Michael (2015) Finite element analysis of a hybrid natural fibre sandwich wall panel loaded with in-plane shear. [USQ Project]

Agoritsas, Stavroula (2015) Investigating the accuracy of terrestrial laser scanning within a rail environment. [USQ Project]

Epselis, Jonathan (2015) Investigation of the relationship between speed and separation width for head-on crashes in New South Wales. [USQ Project]

Jessup, Cameron (2015) Launceston’s Combined Sewerage System – investigation and strategy development. [USQ Project]

Roberton, Stirling (2015) Managing field moisture to reduce the soil compaction risk at cotton harvest. [USQ Project]

Cummings, Shane (2015) Modelling the behaviour of floodways subjected to flood loadings. [USQ Project]

McIntyre, Jamie (2015) Monitoring and removal of natural organic matter (NOM) from Toowoomba water sources. [USQ Project]

Connell, David John (2015) Production of semi-real time media-GIS contents of natural disasters using MODIS satellite data. [USQ Project]

Labrosse, Alexander (2015) Progress towards sustainable road construction – An investigation into the Roads and Maritime Services of New South Wales and Sustainability Rating Tools. [USQ Project]

Koenig, Nathan (2015) Project Management Maturity in Local Government. [USQ Project]

Cox, Raymond (2015) Real-world comparisons between target-based and targetless point-cloud registration in FARO Scene, Trimble RealWorks and Autodesk Recap. [USQ Project]

Wilson, Ronald J (2015) Redefining the standard compaction test to better describe the usage of cotton picking machines on Australian vertosols. [USQ Project]

Coverdale, Constance (2015) Soil nitrogen supply rates during a cotton season. [USQ Project]

George, Timothy Colin (2015) Soil pore blockage as influenced by livestock effluent with specific focus on colloids. [USQ Project]

Alajmi, Rashed (2015) Study on sisal fibres as insulator in building materials. [USQ Project]

Lieschke-Mercer, Yvette (2015) The feasibility of using constructed wetlands systems for urban wastewater. [USQ Project]

Flannery, Aiden Michael (2015) Thermally insulated structural sandwich panels for roofing applications. [USQ Project]

Bernier, Amy (2015) Use of fibre-optic (FBG) sensors in structural health monitoring – high grade reinforced concrete beams. [USQ Project]

Fraser, Carl (2015) Vulnerability of bridges in extreme flood events based on element failure. [USQ Project]

Weinheimer, Ina (2015) Wastewater treatment using tidal flow wetlands. [USQ Project]

Smeaton, Curtis (2015) Surveying applications of photogrammetric UAVs - a comparison with conventional survey techniques. [USQ Project]

Trent, Stephen Wade (2015) Assessment of habitat factors and development of a species distribution model for the long nosed potoroo (Potorous tridactylus tridactylus) in SEQ. [USQ Project]

Saxby, Ian Michael (2015) Regulating rescue package descent through controlled autorotation. [USQ Project]

Wright, Christopher John Brockway (2014) Evaluation of issues for small and medium-sized enterprises in the use of advanced and green engineering materials. [USQ Project]

Coburn, Adam John (2014) Laser scanning for forest structure analysis. [USQ Project]

Tomasel, Aden (2014) The energy storage potential of a hybrid renewable generation grid connected to a pumped hydro-generation plant for effective connection into the energy market, off peak switchable developing load demand market and act as ancillary regional voltage support and bulk water supply. [USQ Project]

Sweeney, Juliana (2014) Topological optimisation of large reinforced concrete box culverts under SM1600 loads. [USQ Project]

Sheridan, Liam (2014) Aquaplaning: an investigation of surface flow calculation. [USQ Project]

Surendar, Swetha (2014) Flexural behaviour of sandwich panels under elevated temperature. [USQ Project]

Blyth, Mitchell (2014) Investigation into sub five minute time of concentration in urban drainage design. [USQ Project]

Topp, Michael James (2014) LiDAR data for DEM generation and flood plain mapping. [USQ Project]

Seccombe, Kieran Robert (2014) Numerical modelling of mining subsidence. [USQ Project]

Darton, Alex (2014) Quantification of the measurement error associated with in situ measurements of water absorption and attenuation using the AC-9 instrument. [USQ Project]

Stager, Martin Franz (2014) The impact of compact urban form on the provision of public road transport. [USQ Project]

Knipe, Russell Alexander (2014) 3D fluid modelling of the O.O. Madsen Bridge during flood. [USQ Project]

Knight, Tracey Anne (2014) Alkali-silica reaction in concrete bridge piles: strengthening with fibre-reinforced polymers. [USQ Project]

Knight, Tracey Anne (2014) Alkali-silica reaction in concrete bridge piles: treatment and strengthening with fibre-reinforced polymers. [USQ Project]

Boully, Jacinda (2014) An analysis of human behaviour which can cause fatalities in the bus and train tunnel during a tunnel fire event. [USQ Project]

O'Callaghan, Adam (2014) An analysis of roadbase materials used in foamed bitumen stabilisation. [USQ Project]

Baxter, Melissa Hope (2014) An energy and carbon audit of Mornington Peninsula Shire Council. [USQ Project]

Dudman, Benjamin (2014) Aquaplaning assessment and mitigation in flat terrains. [USQ Project]

Liddell, Benjamin Steven (2014) Assessing the true cost of design variations – a designer’s perspective. [USQ Project]

Nicol, Lachlan Keith (2014) Behaviour of fibre composite walkways and grating. [USQ Project]

Single, John H. (2014) Cost effective pavement reconstruction or rehabilitation profile(s) in Townsville. [USQ Project]

Atkinson, Jack Allan (2014) Dam deformation surveys with modern technology. [USQ Project]

Brits, Chane (2014) Developing a numerical model for the design of sheet pile walls. [USQ Project]

McKenzie, Seren (2014) Development of a road safety plan for Scenic Rim Regional Council. [USQ Project]

Hesse, Gareth Grant (2014) Development of ductile and ultra-high performance engineered cementitious composite (ECC) with lightweight microsphere additive. [USQ Project]

Sanders, Thomas (2014) Effective road pavement rehabilitation design for local government roads within the Sunshine Coast region. [USQ Project]

O'Sullivan, Daniel (2014) Evaluation of precise point positioning services. [USQ Project]

Rosas, Angela Beatriz Rodriques (2014) Experimental investigation on the alkali silica reaction effect on concrete strength degradation. [USQ Project]

Wilton, Joshua (2014) Foam bitumen stabilisation in north west NSW. [USQ Project]

Guse, Hayden Alexander (2014) Great artesian basin (GAB) water cooling systems for municipal supplies. [USQ Project]

Makireddi, Surya (2014) Groundwater recharge prediction for broad scale irrigation modelling: a case study in the M.I.A-main canal irrigated areas. [USQ Project]

Makireddi, Surya (2014) Groundwater recharge prediction for broadscale irrigation modelling: a case study in MIA-Main Canal irrigated areas. [USQ Project]

Newman, Matthew (2014) High speed rail in Australia: a case study for a Sydney- Wollongong link. [USQ Project]

Wady, Ivan (2014) Inflow/infiltration strategic management project. [USQ Project]

Stanton, Vernon (2014) Investigation of the effect of positive and negative crossfalls on road safety at roundabouts. [USQ Project]

Norman, Grant (2014) Investigations into Cambooya’s water supply pressure with respect to local contributing bores. [USQ Project]

Coburn, Adam John (2014) Laser scanning for forest structure analysis. [USQ Project]

Clayton, Scott (2014) Lateral earth pressure problems involved with cantilever retaining structures and stability of those structures. [USQ Project]

Bradford, Thomas J. (2014) Low-cost eye tracker. [USQ Project]

Grigg, Andrew (2014) Mapping changes in landscape-scale patterns of vegetation in coal seam gas development areas. [USQ Project]

Watson, George Kenneth (2014) Measurement of waste in concrete construction using lean construction methodologies. [USQ Project]

Hatch, Daniel Roy (2014) Modal testing of existing supermarket floor systems and predictive finite element modelling for better design. [USQ Project]

Hancock, Nashua Thomas (2014) Natural disaster risk management in South Asia a dissertation. [USQ Project]

Williams, Wesley James (2014) Numerical simulations of water surfaces for improved evaporation prediction. [USQ Project]

Holzner, Katherine (2014) Rigid central safety barriers in constrained road environment. [USQ Project]

Franks, Chris (2014) Safety and efficiency benefits of implementing zip merge treatments in NSW. [USQ Project]

Power, Scott (2014) The affect of lighting interchange ramps on safety – a study of the M1. [USQ Project]

King, Bernie-Anne (2014) The effect of road roughness on traffic speed and road safety. [USQ Project]

Miller, Nadya (2014) The impact of a new light rail network upon walkability in a central business district. [USQ Project]

Carey, Tyler (2014) The thermal performance of an earth sheltered shipping container. [USQ Project]

Kraljik, David (2014) The value of public space – a town square in a small urban community. [USQ Project]

Byrd, B. (2014) Using desktop hydrologic data to predict fish presence in streams in northern British Columbia. [USQ Project]

Freeman, Bryan (2013) A preliminary feasibility study for transporting Surat Basin export coal using Maglev technology. [USQ Project]

Kirjan, Jeremy Nicholas (2013) Use of wire extensometers for monitoring pavement performance in areas of slope instability. [USQ Project]

Eaton, Timothy (2013) Exploring the application of closed form solutions in geotechnical problems. [USQ Project]

Bowles, Yvonne Elizabeth (2013) A consistent approach to headlight screens in NSW. [USQ Project]

Bell, Mitchell (2013) Accuracy of a machine guided grader. [USQ Project]

Stanley, Thomas (2013) Assessment of the FARO 3D focus laser scanner for forest inventory. [USQ Project]

Sussanna, Vittorio (2013) AUSGeoid09 performance in mountainous regions. [USQ Project]

Savage, Andrew (2013) Brisbane City Council strategic planning: delivery of sustainable transport. [USQ Project]

Brailsford, Steven (2013) Cathodic protection of reinforced concrete bridges in the marine environment as an asset management tool. [USQ Project]

Horan, Darryl (2013) Comparison of a traditional and a distributed storage water supply network for an isolated system. [USQ Project]

Johnson, Peter (2013) Comparison of direct rainfall and lumped-conceptual rainfall runoff routing methods in tropical North Queensland – a case study of Low Drain, Mount Low, Townsville. [USQ Project]

Kohn, Nicholas (2013) Effects of proposed bioretention system on existing waterbird habitat. [USQ Project]

Reynolds, Peter William (2013) Engineering correlations for the characterisation of reactive soil behaviour for use in road design. [USQ Project]

Metcalfe, Patrick James (2013) Evaluation of remotely piloted aircraft in surveying applications. [USQ Project]

Sebby, Melcuam (2013) Evaluation of roads safety processes currently used in Queensland. [USQ Project]

Cleaver, Benjamin L. (2013) Evaluation of the performance of web-based GNSS post processing systems. [USQ Project]

Neumann, Philip (2013) Evaluation of the strength characteristics of recycled bituminous pavement materials. [USQ Project]

Jenaway, Brett (2013) Evolution of stadiums: a study in the design and construction of ancient and modern stadia. [USQ Project]

Serra, Michael Peter (2013) Geotechnical stability analysis using student versions of FLAC, PLAXIS and SLOPE/W. [USQ Project]

Crawford, Peter Alexander (2013) Improving surfing conditions in conjunction with coastal erosion protection. [USQ Project]

Dinsmore, Robert Colin (2013) Investigating the impact of the Request For Information process in construction. [USQ Project]

Dann, William (2013) Investigation into traffic controller health and safety at road works in Queensland. [USQ Project]

Green, Nathan Andrew (2013) Investigation of cyclist safety within the Brisbane Bicycle Hire Scheme. [USQ Project]

Wicks, Jaymee (2013) Investigation of factors influencing maximum biogas production of abattoir wastewater. [USQ Project]

Burke, Maxwell James (2013) LiDAR data for DEM generation and flood plain mapping. [USQ Project]

Dillon, Megan (2013) Little streets in small cities: the role of laneway activation in regional Queensland CBD revitalisation. [USQ Project]

Hartwig, Andrew (2013) Management of low traffic volume roads unsealed road classification system. [USQ Project]

Fletcher, Wade Daniel (2013) MUSIC model accuracy in predicting stormwater quality. [USQ Project]

Sams, Mathew Steven (2013) Numerical and physical modelling of a 2D tunnel heading at collapse. [USQ Project]

Blyth, James Ian (2013) Optimising earth dam design in seasonal freeze-thaw climates. [USQ Project]

Zeller, Mark Nicholas (2013) Reduced road lighting standards during times associated with low traffic volumes. [USQ Project]

Zahl, Michael Stuart (2013) RTK GNSS in cadastral surveying. [USQ Project]

Campbell, Eyre (2013) Simulation of sawmill yields at Hyne Tuan Pine Mill. [USQ Project]

Spilsbury-Brinkmann, Casey (2013) The economic feasibility of upgrading Moree’s light industrial area to legally cater for restricted access vehicles. [USQ Project]

Madanavosa, Savenaca (2013) The effect of efflorescence on the mechanical properties of geopolymers. [USQ Project]

Smith, Wesley (2013) The role of private enterprise in transforming the water, sanitation and hygiene sector in rural sub-Saharan Africa. [USQ Project]

Spurling, Harrison (2013) Water sensitive urban design for sustainable road development. [USQ Project]

Gaffney, Allister Henry (2013) Water sensitive urban design for the Spring Creek catchment and MUSIC sensitivity analysis. [USQ Project]

Hautsalo, Kari (2013) Evaluation of the performance of different global satellite navigation systems (GNSS) for Australian GNSS users. [USQ Project]