Browse by Format Type

2023

Whittaker, Bob (2023) A Sweet Use of Adversity – National Servicemen in Vietnam. [USQ Project]

2022

Coonan, Tom (2022) A New Supplementary Binder in Foamed Bitumen Stabilisation. [USQ Project]

Coogan, Tim (2022) A Water Sensitive Urban Design approach to mitigate the effects of Rainfall Derived Infiltration and inflow on existing sewerage systems. [USQ Project]

Schuster, Robert (2022) Airborne Observation Controller. [USQ Project]

Jennings, Clinton (2022) An integrated “Mine to Mill” automation methodology applied to Sanbrado. [USQ Project]

Alves, Billy Michael (2022) Analysis of Inflow and Infiltration in a Low-Pressure Sewer System. [USQ Project]

Ford, Albie (2022) Analysis of Traffic Speed Deflectometer (TSD) data on State Highways in Southland, New Zealand. [USQ Project]

Hill, Hamish (2022) Australian Carbon Credit Unit Calculator for Concrete Recycling Facility Use. [USQ Project]

Rayner, Andrew (2022) Behaviour of GFRP Reinforced Concrete Slab on Ground. [USQ Project]

Wyper, Rye (2022) Benefits and Challenges of Applying Travelling Wave Technology to Sub-transmission Networks. [USQ Project]

Keenan, Mike (2022) Bridge load assessment using machine learning and weigh-in-motion data. [USQ Project]

Armanasco, Matthew (2022) Cardiac Biometric Authentication Using Channel State Information. [USQ Project]

Cooper, Brodie (2022) CFD Analysis of a Primary Nozzle Vortex Generator on Steam Ejector Performance. [USQ Project]

Henderson, Adam (2022) Combination Harvest and Bale Machinery’s Impact on Cotton Productivity in High Clay Cotton Fields of Northern NSW. [USQ Project]

Hollingshead, Fraser (2022) Compaction density of partially saturated soils. [USQ Project]

French, Corey R. M. (2022) Comparative study of modular construction methodologies within residential and commercial applications. [USQ Project]

Gough, Tom (2022) Compressive Behaviour of Short Engineered Cementitious Composite Columns Containing Recycled Polyethylene Terephthalate Aggregate. [USQ Project]

Fritz, Patrick (2022) Design Analysis of Guy Wires of Communication Towers: Industry Based Project Proposed by Raytheon Australia. [USQ Project]

Drummond, Gordon Alexander (2022) Design and Manufacture of Scaled FSAE Chassis Using Generative Design and Topology Techniques. [USQ Project]

Allen, Gregory (2022) Design of a Small-Scale Pyrolysis Machine. [USQ Project]

Shrestha, Ashesh (2022) Design of low-density high performing lattices. [USQ Project]

Ahlers, Corey (2022) Development Of an Adaptive Control Mechanism to Enable Automated Irrigation on Gantry Robots. [USQ Project]

Tomac, Beau (2022) Development of an Improved Concrete Defect Object Detection Method for Edge AI Inference Technology. [USQ Project]

Sharpe, Kyal (2022) Development of Smart Sewer Pipeline Fault Detection Method using CCTV Inspection Data and Deep Learning. [USQ Project]

Middenway, Jayden (2022) Digital fabrication with collaborative robotics. [USQ Project]

McLaughlin, Ayrton (2022) Effective techniques for reducing the effects of skilled labour shortages in the Australian construction sector. [USQ Project]

O'Donoghue, Grant (2022) Evaluation of engineering solutions to protect Cairns from coastal inundation due to storm surge and sea level rise. [USQ Project]

Schneekloth, Jenelle (2022) Evaluation of geocomposite reinforced pavement for suitability in Queensland roads. [USQ Project]

Perkins, Shaun (2022) Evaluation of Issues Affecting Stabilised Granular Pavements. [USQ Project]

Sheehan, Michael (2022) Fabrication and design of a Stirling Engine powered by hydrogen. [USQ Project]

O'Keeffe, Myles E. (2022) Feasibility of using Thermoelectric Generators to Improve Fuel Efficiency in Existing In-service Vehicles. [USQ Project]

Wells, Keith (2022) Geometry Refinement of Venturi Flow Meters to Reduce Energy Losses in Water and Air Applications. [USQ Project]

Rath, Jaymes (2022) Identifying and implementing best practice models for management of unsealed road networks in NSW Local Government to achieve sustainability. [USQ Project]

Denman, Michael (2022) Identifying the Types and Causes of Construction Defects in Multi-Unit Dwellings. [USQ Project]

Green, Sam (2022) Investigation into implement status awareness for autonomous tractors. [USQ Project]

Sale, Maggie (2022) Lessons Learnt from Bridge Reconstructions Post Successive Disaster Events in the Eurobodalla LGA. [USQ Project]

Francis, B. (2022) Lunar Resources: Geosensing for Autonomous Exploration. [USQ Project]

Bischof, Lachlan (2022) Off-Highway Platooning Sensor Selection and Survivability. [USQ Project]

Wium, Coenraad (2022) Optimal Model Designs for Community Batteries. [USQ Project]

Baker, Ted (2022) Optimisation of a Hydro-Pneumatic Accumulator using Computational Fluid Dynamics. [USQ Project]

Elliot, Jake Cameron (2022) PCB standards. [USQ Project]

Shrestha, Nabin (2022) Remote Controlled Motorised Laser Alignment Trolley. [USQ Project]

Ferriday, Daniel Goward (2022) Scour Risk Assessment of the O. O. Madsen Bridge During Flood. [USQ Project]

Downing, Elizabeth (2022) Shear Strength Properties of Clean and Clay Infilled Rock Joints: An analysis of the impact of moisture content under CNL conditions. [USQ Project]

Donnelly, Adam John (2022) SICK vs Intrinsic. [USQ Project]

O'Connor, Danny (2022) Soil compaction dependence on sub-field spatial soil constraint variability. [USQ Project]

Faivre, Yohanne (2022) SPT - CPT Correlation in South East Queensland, Australia. [USQ Project]

Irving, Jonathan (2022) The analysis of torque required for sealing of threaded brass flare fittings. [USQ Project]

Di Mauro, Matthew N. (2022) The Comparative Analysis of the Design of Shredder Hammer Tips and Bars in Sugar Milling Applications. [USQ Project]

Bourke, Christopher (2022) UAS autonomous drop zone assessment and adaptive delivery. [USQ Project]

Ansell, Cameron (2022) Understanding ballasting agent dynamics when recycled in a ballasted flocculation process and impact on performance. [USQ Project]

Hall, Nick (2022) Unsealed Road Grading Techniques. [USQ Project]

McManus, Brendan (2022) Use of Expanded Polystyrene (EPS) Integrated with Steel Fibres as Coarse Aggregate Replacement in Concrete. [USQ Project]

Chambers, Brad (2022) Vibration Analysis of an Excavator to Investigate the Effects on the Operator. [USQ Project]

Wilson, Stephanie (2022) Water Budgeting & Urban Water Demand Management in Townsville. [USQ Project]

2021

Cale, Florentino (2021) A Case Study in Failure Analysis and Material Selection of Corrosion Under Insulation (CUI) of Piping Components in Oil and Gas. [USQ Project]

Remington, Callum (2021) A comparative study on determining primary and secondary stress levels in boiler valve bodies between FEA simulations, RemLife, and the ASME BPVC Section III Division I NB approach. [USQ Project]

Batstone, Seamus (2021) A review of smoke dispersion models for smoke pollution hazard mitigation associated with controlled, forest fuel reduction burns. [USQ Project]

Amerri, Ali (2021) A Simulation Study on Bamboo Fiber Based Composite Bricks. [USQ Project]

Reitano, Kieran (2021) Advanced Process Control Applications in Complex Industrial Processes. [USQ Project]

Quinlivan, Patrick (2021) Albury Wodonga Bus Network Assessment Model. [USQ Project]

Somerville, Jarrod (2021) Alluvial Geology of North-West Sydney and its Impact on Development. [USQ Project]

George, Phillip (2021) An Investigation into design and construction of a leachate dam in Lismore. [USQ Project]

Crosby, James (2021) Analysis of Flow Characteristics Within USQ's Icing Wind Tunnel. [USQ Project]

Clarke, Michael (2021) Analysis of improving Railway transition zones in the Queensland Rail network: intervention in super structure components. [USQ Project]

Young, Lauren (2021) Analysis of the Suitability of Roundabouts for Heavy Vehicles driving at High Speeds in Queensland. [USQ Project]

Brisolin, Jacob (2021) Application of Automated Road Fault Detection for Improved Asset Maintenance Planning. [USQ Project]

Kapor, Alex (2021) Apply Advanced Process Control to Fine Screening Circuit in Large Mineral Processing Plant. [USQ Project]

Heap, Harvey (2021) Behaviour of GFRP-Reinforced Precast Concrete Decks Under Uniform Loading. [USQ Project]

Thrower, Ryan (2021) BIM standardisation and its effect on project delivery in the Australian civil design and construction industry. [USQ Project]

Gould, Jackson (2021) Bucking Units - A More Effective Approach. [USQ Project]

Hardless, Benedict (2021) Cognitive Radio for Improved NBN Access in Regional Areas. [USQ Project]

Xeros, Saxon R. (2021) Comparative Evaluation of the In-Plane Shear Behaviour of GFRP Composite Wall Systems With and Without Window Openings. [USQ Project]

Warry, Nicholas (2021) Design and Feasibility Study of Hydro Generators at Various Stages of Mains Water Supply. [USQ Project]

Heath, Michael (2021) Design of an Ultra-Compact and Lightweight Wheelchair to Carry onto Passenger Planes. [USQ Project]

Reynolds, Brayden (2021) Design optimisation of drag struts for seismic and wind loading in multi-storied structures. [USQ Project]

Dixon, Andrew Peter (2021) Develop a framework for residential construction cost estimating in the Australian market. [USQ Project]

Walker, Jessica (2021) Developing a Benchmark for the Energy Efficiency of Residential Modular Housing Designs. [USQ Project]

Blessing, Benn (2021) Developing a software interface between Dräger Winaccess API and influxDB Time series database. [USQ Project]

Reid, Amber Hope (2021) Development of an Innovative Flooring System for Residential and Light Industrial Buildings. [USQ Project]

Gooneratne, Shaun (2021) Digitally Fabricated Reduction Drive for Low-Cost Robotics Applications. [USQ Project]

Carter, Joshua (2021) Drone Swarm Simulation for Tracking High Capability Malicious Drone. [USQ Project]

Siddans, Ryan (2021) Effectiveness of earth mat when jointing high voltage underground cables (33 kV and above). [USQ Project]

Priebbenow, Aidan (2021) Effects of joining systems and sheathing on the in-plane shear behaviour of modular composite wall systems. [USQ Project]

Towers, Haley (2021) Evaluation of Signalisation as a Treatment for Roundabouts. [USQ Project]

Hollingworth, Leigh (2021) Evaluation of the Performance of Recycled Concrete Aggregate in Fresh Concrete for Manufacturing Fence Posts. [USQ Project]

Jadan, Dima (2021) Evaluation of the Suitability of Fibre Composites for Road Bridges. [USQ Project]

Hartmann, Gregory (2021) Examining the Re-entry of a Tumbling Object During Freefall. [USQ Project]

Cain, Joshua (2021) Feasibility of Fibre-Reinforced Polymer (FRP) Composites for Engine Pushrods. [USQ Project]

Brian, Ashley (2021) Feasibility on Vertical Column Gravity Separation of Class O Fluids. [USQ Project]

Chambers, Aaron (2021) Feasibility Study to Upgrade DOL Driven Pumps to Variable Speed Drives. [USQ Project]

Whiting, Ella (2021) Fracture Toughness of Hybrid Hierarchical Honeycombs. [USQ Project]

Clarke, Terrence (2021) Heat Exchanger Performance and Optimisation. [USQ Project]

Bell, Wayne (2021) Hydrologic Catchment Modelling to Supplement Potable Water Supply in Central Western NSW. [USQ Project]

Jawad, Poonam (2021) Identification of the effectiveness of various commercial COVID -19 Masks using ANSYS software. [USQ Project]

Jennings, Nicholas (2021) Identifying Abnormalities in Indoor Environments using Obstacle Detection Programming. [USQ Project]

Kellner, Nicholas (2021) Investigating Urban Stormwater Collection for Potable use; a Feasibility Study for Gloucester, NSW. [USQ Project]

Eager, Drew (2021) Investigation of Potential Benefits of BIM to Provide Efficiencies in the AEC Industry. [USQ Project]

Singh, Anshdeep (2021) Investigation on the properties of concrete with Expanded Polystyrene. [USQ Project]

Guthrie, James Stuart (2021) Low-cost data logger for electrical respiration sensor. [USQ Project]

Wallin, Anthony (2021) Machine Vision for Locomotive Control. [USQ Project]

Smith, Jabin (2021) Monitoring Elderly Falls in the Home Using Computer Vision. [USQ Project]

Price, Daniel (2021) Natural Language Processing to support Nurse-to-Patient allocation in acute care. [USQ Project]

Coutts, Aaron (2021) Optimal fuel cost controller design for a helicopter/twin rotor system. [USQ Project]

Welsh, Daniel (2021) Optimal Sizing of Stand Alone Power Systems to Avoid Capital Expenditure on Rural Distribution Networks. [USQ Project]

Staats, Thomas Patrick (2021) Photogrammetry UAV and terrestrial LiDAR, A comparative review in Volumetric surveys. [USQ Project]

Batterham, Jesse (2021) Power Assist Add-on for Manual Wheelchairs. [USQ Project]

Castles, Simon (2021) Precision RTK GNSS for low-cost robotic systems. [USQ Project]

Smith, Callum (2021) Predictions for the Hydrological Performance of the Parua Stream Dam. [USQ Project]

Browne, Thomas (2021) Resilience of Existing Drainage Networks to Climate Change Effects. [USQ Project]

Compton, Peter (2021) SCADA Test Environment for Cybersecurity Analysis of Critical Infrastructure Systems. [USQ Project]

Ball, Ryan (2021) Shear strength properties of sand with fines for various moisture contents. [USQ Project]

Alshammari, Mehsal (2021) Simulation of impact behaviour of polymer composite. [USQ Project]

Altamimi, Fares (2021) Simulation on fatigue behavior of fiber composites considering the common defects. [USQ Project]

Ruelcke, Chris (2021) Structural design and considerations of steel modularized and transportable substations. [USQ Project]

Stringer, Samuel Hall (2021) The Ability to Produce Type II Protection Using a Variable NER. [USQ Project]

Wallis, Matthew (2021) The Efficiencies that Building Information Modelling (BIM) 3D Visualisation can provide the residential sector of the Australian Construction Industry. [USQ Project]

Bellew, David (2021) The roles of energy networks in providing a sustainable delivery of the ACT Government's target for net zero emissions. [USQ Project]

Higo, Kieran (2021) Time-optimal Controller Design for An Auto TCD Probe. [USQ Project]

Bielefeld, Kristin (2021) Torsional Behaviour of Precast Concrete Planks Reinforced with Glass Fibre Reinforced Polymer Bars. [USQ Project]

Sims, Daniel (2021) Turbofan Engine Crystal Icing: Computational Fluid Dynamics Study. [USQ Project]

Raymond, Tom (2021) Uninterrupted Power from Wind for an Off-grid Communication Setup. [USQ Project]

Priest, Eli (2021) Unique Identification of Bluetooth Transmitters Through RF Fingerprinting. [USQ Project]

2020

Stanford, Rawdon (2020) A comparison of 'AS/NZS 1170.2:2011 Wind Actions' and structural analysis software packages for design of structures. [USQ Project]

Mylrea, Cliff (2020) A Reliability Centered Maintenance program incorporating probabilistic based simulation. [USQ Project]

Moore, Cassandra (2020) A Verification of AprilTags for a Pharmacy Application. [USQ Project]

Witton, Caleb (2020) Acoustic measurement methods in forced flow vortex dispersion within a paint manufacturing process. [USQ Project]

Hundloe, Kyle (2020) An assessment of durability and mechanical properties of post-consumer polypropylene fibre reinforced concrete. [USQ Project]

Courtis, Peter (2020) An investigation of small-scale wave energy converters for marine sensors. [USQ Project]

Mbambe, Putumani (2020) An investigation of the key barriers preventing development of Small Medium Enterprises (SMEs) in the South African construction industry. [USQ Project]

Flores, Manuel (2020) Applying Urban Stormwater Modelling to Aquaculture Prawn Farm Effluent in Queensland. [USQ Project]

Thomson, Brendon (2020) Asset Management Planning for New Zealand Local Roads. [USQ Project]

Rousseau, Pierre (2020) Automated Identification of Insect Pests in Traps. [USQ Project]

Nowak, Adrian (2020) Building Information Modelling (BIM) and its adoption and effectiveness as a tool in the management of constructions projects in Australia. [USQ Project]

Vaughan, Patricia (2020) Case Study: Bring back 'the Gap'. [USQ Project]

Abougamil, Reda Abdelshafy Abouzied (2020) Causes of Delays and Disputes in the Saudi Arabian Construction Industry Compared with the Degree of Delays and Disputes in the UK Construction Industry. [USQ Project]

Aldhefiri, Nader A. S. J. Kh (2020) Comparison of Engine Performance, Emissions and Nozzle Spray Pattern of Different Biofuels. [USQ Project]

McConnell, Brayden (2020) Comparison of SLAM algorithms and neural networks for autonomous navigation in simulated environments. [USQ Project]

Schnebli, Benjamin (2020) Continuously Variable Ratio Rocker Arms. [USQ Project]

Cawdell-Smith, Jack H. (2020) Critical Factors Affecting Sustainability in Australian Civil Construction Industry: An Investigation into Sustainability Culture. [USQ Project]

Pfeiffer, Viktoria (2020) Dam water extraction analysis for Toowoomba under increasing demand. [USQ Project]

Cowles, Drew (2020) Design and Development of a Fault Identifying Residual Current Device. [USQ Project]

Whittering, Matthew (2020) Design and Evaluation of a Recirculating Aquaponic System. [USQ Project]

Cooney, Benjamin Owen (2020) Design of a Rig for Automated tissue discrimination in beef striploin during trimming operations. [USQ Project]

Grazioli, Haydn (2020) Developing an Asset Prioritization System for Hinchinbrook Shire Council’s Water and Sewerage Assets. [USQ Project]

Torrance, Logan (2020) Development of Comparative Test Protocols for the Assessment of Autonomous Tractor Performance. [USQ Project]

McEvoy, Daniel J. (2020) Drag reduction and wake mitigation in wind turbines using riblet microstructures. [USQ Project]

King, Alexander (2020) Effect of Thermal Boundary Layer Below Water Surfaces on Evaporation. [USQ Project]

King, Mitchell (2020) Effective Corporate Social Responsibility for Australian SMEs (Small to Medium-Sized Enterprises) in the Building & Construction Industry. [USQ Project]

Chapman-Vagg, Kaz (2020) Effective Road Pavement Reconstruction in Fraser Coast Region QLD. [USQ Project]

Cameron, Adrian (2020) Effects of sewage effluent on soil constraints in the Tamworth Region of New South Wales. [USQ Project]

Paton, Bradley (2020) Electrical Control Systems and Invertor Development for a 10kW Wind Turbine. [USQ Project]

Angove, Trent (2020) Energy Performance Analysis of a Six Green Star Building. [USQ Project]

Haywood, Chad (2020) Energy Return on Investment (EROI) of an Australian Wind Farm. [USQ Project]

Arnold, C. (2020) Eye of the swarm: real-time analysis of factors affecting dynamic UAV pursuit of a moving target. [USQ Project]

Osgood, Michael (2020) Feasibility Assessment of Using Water Storage Sources to Improve the Efficiency of Air-Conditioning Systems. [USQ Project]

Walsh, Justin (2020) Feasibility of polymer coated femoral stems and pre-cooling for improved triboperformance and stress distribution. [USQ Project]

Tomkinson, Christopher (2020) High volume drone collision avoidance with cooperative formation flying. [USQ Project]

van Neuren, Craig S. (2020) How Building Information Modelling software (BIM) is being used in the Architectural and Engineering (AE) industry and how the use of this software is impacted by the AE industries own understanding of BIM - A South East Queensland (SEQ) Perspective. [USQ Project]

Webb, Alister (2020) Hypersonic Nozzle Characterisation Using CFD. [USQ Project]

Williams, Sally (2020) Influence of Water-Grout Ratio and Curing Time on Pull-Out Load of Rock Bolt Systems. [USQ Project]

Carson, Matthew Glenn (2020) Investigating the Beneficial Effects of Alternate Fines in Concrete. [USQ Project]

Wall, Nicholas (2020) Investigation into the Effect of Bonding Methods for 3D Printed Titanium in Scarf Ribbon Repairs with a Composite Parent. [USQ Project]

Visser, Tyson (2020) Investigation into the effect of partial cement replacement with waste ceramic powder on the brick-mortar bond. [USQ Project]

Barrett, Matthew (2020) Investigation of millimetre FMCW radar for improved situational awareness for fire fighting vehicles. [USQ Project]

Brady, Milasari (2020) Investigation on Mechanical and Durability Properties of Recycled Concrete. [USQ Project]

Li, J. (2020) Land Preservation for Future TransportInfrastructure in Metropolitan Queensland. [USQ Project]

Cornish, Alan Christian (2020) Low Load Frequency Support Capability - Collie Power Station. [USQ Project]

Maunder, Brayden (2020) Low Velocity Projectile Impact Testing of the Thunderbolt Shield. [USQ Project]

Picking, Ethan (2020) Low-cost compact Modbus TCP based device configuration/interrogation tool. [USQ Project]

Johnston, Mitchell (2020) Machine data collection and analysis for system fault rectification. [USQ Project]

Montgomery, Zachary (2020) Mapping rollercoaster forces using acceleration and GNSS data. [USQ Project]

McCluskey, Jonathan (2020) Philosophy and Design of Reverse Osmosis Membrane Replacement. [USQ Project]

Perez, David Anthony (2020) Plug in electric vehicle charger controller utilising internet of things to improve network efficiencies. [USQ Project]

Hopkins, Andrew (2020) Pre-Emptive Detection of Mobile Phone Use In-Vehicle. [USQ Project]

Chamberlain, Michael (2020) Re-purposing LED Light bulbs. [USQ Project]

Straker, Jonathon (2020) Real-time Pollen Detection by Intrinsic Protein Fluorescence. [USQ Project]

Maloney, Joshua (2020) Rural Catchment Modelling: Application in Ungauged Catchments. [USQ Project]

Hickson, Jason (2020) Scanning of Timber Dimensions within High Ambient Lighting. [USQ Project]

Long, Dean (2020) Simulation of the Effects of Wind on the Dragon Kayakers in Competition. [USQ Project]

Pitt, Peter (2020) Smart Shaving Mirror. [USQ Project]

Zanetich, Nikolas (2020) Solid Oxide Fuel Cell Hybrid Systems as a Distributed Cogeneration Solution. [USQ Project]

Antonio, Simbarashe (2020) ST18 Autonomous enhancement strategies (detection of wall impacts and development of a self-cleaning laser scanner). [USQ Project]

Erasmus, Vernon Marc (2020) Stability analysis on a fossil fuel ash dam using a 3D numerical method. [USQ Project]

Armstrong, Gerard (2020) Structural and Aerodynamic Load Prediction of a Hypersonic Rocket with Variations in Angle of Attack. [USQ Project]

Burge, Matthew (2020) SwarmFarm Robotics Dock and Refill Station. [USQ Project]

Marshall, William (2020) Tactile sensing instrument design for discriminating features of deforming tissue structures within beef striploin. [USQ Project]

Sandl, Cassandra (2020) The Adaption of Dynamic Shape Display Technology for use with Virtual Reality Treadmills. [USQ Project]

Gadalla, Ahmed (2020) The Effects of Extreme Weather Events on Flexible Pavement. [USQ Project]

Lobwein, Mark (2020) The investigation of stormwater runoff by utilising a combination of green infrastructure in different sized urban residential catchment. [USQ Project]

Gwaya, Oswald (2020) The role of steel fibres on the compressive and tensile properties of concrete. [USQ Project]

Qalilawa, Peter William Edward (2020) The use of model software that incorporates pressure-reducing valves in the Suva-Nausori Water Distribution System to minimize water disruption. [USQ Project]

Mendonca, Jessica (2020) To define and model meteorological drought in the Northern Agricultural Region of Western Australia. [USQ Project]

Dunn, Glen (2020) Volt var regulation algorithm using distributed transformer low voltage analogues. [USQ Project]

2019

Lee, Greg (2019) A Comparison Analysis into Flange Survey Techniques. [USQ Project]

McTegg, Stephen (2019) A criteria based approach to unmanned aerial vehicle regulations. [USQ Project]

Sharkey, Luke (2019) Accuracy Assessment of the Riegl VMQ-­‐1HA Mobile Laser Scanner. [USQ Project]

Almuhaini, Hamad (2019) Adhesive wear of rubber in mining application under dry contact condition. [USQ Project]

Buckley, Paul (2019) An investigation into the feasibility of micro scale pyrolysis powered by renewable energy. [USQ Project]

Robertson, Samuel (2019) An investigation into the reduction of ongoing maintenance costs by sealing fullwidth on two-way, rural roads. [USQ Project]

Rowles, Mitchell (2019) Analysis of Influencing Factors of Construction Project Complexity from Different Stakeholders Perspectives. [USQ Project]

Whittington, Mitchell (2019) Analysis of Mobile Laser Scanning (MLS) Ground Control Methods and Achievable Accuracies. [USQ Project]

Nooriafshar, Darius (2019) Applying Systems Engineering Approaches to the Management of Electrical Engineering Projects. [USQ Project]

Lazarevic, Aleksandar (2019) Assessment of Automatic Target Recognition Against Manual Aiming in Conventional Establishment of Survey Control. [USQ Project]

Pont, Jason (2019) Autonomous navigation of a partially unknown environment. [USQ Project]

Viero, Morgan (2019) Capacitive Voltage Transformer Monitoring and Failure Mode Analysis. [USQ Project]

Wright, Craig (2019) Chemically Bonded Excavator Bucket Redesign. [USQ Project]

Copley, Matthew Kevin (2019) Comparison between robotic total station reflector-less measurement and terrestrial laser scanning for building modelling. [USQ Project]

Wass, Jack (2019) Comparison of land vs floating evaporation pans to measure evaporation from dairy farm effluent ponds in the Waikato Region, New Zealand. [USQ Project]

Krautz, Nathan (2019) Comparison of TLS to total station accuracy for tree parameter measurement in biomass estimation. [USQ Project]

Beavis, Callum (2019) Comparison of Vertical Positional Uncertainties between AUSGeoid09 and AUSGeoid2020 in South East Queensland. [USQ Project]

Montes, Juan (2019) Computer Model for Sensor-Less Daylight Harvesting. [USQ Project]

Cassim, Ahamed Asraz Aslam (2019) Conceptual design of the non-assisted wheelchair, for improved functionality and ergonomics for public spaces. [USQ Project]

Fisher, Matthew (2019) Condition Monitoring for Predictive Maintenance Purposes. [USQ Project]

Ball, Jonathon (2019) Condition Monitoring using a Low Power Wide Area Network based on LoRaWAN. [USQ Project]

Swift, Alexander Robert John (2019) Conflict of Interest: The Dual-Role Superintendent / Lead Designer in Construct Only Contracts. [USQ Project]

De La Rosa, Oscar Garrido (2019) Conversion of Cadastral Survey Information into LandXML Files using Machine Learning. [USQ Project]

Prasad, Nirbhay (2019) Crusher Dust as Man Sand Replacement of Natural Sand. [USQ Project]

Weedon, Brent (2019) Design and implentation of axial-flux permanent magnet machine for use in wind turbine applications. [USQ Project]

Alharbi, Faisal (2019) Design of a Brushless DC drive for unmanned aerial vehicles. [USQ Project]

Egan, Joshua (2019) Detection and analysis of disruption or discontinuities to Continuously Operating Reference Stations (CORS). [USQ Project]

Greenbank, Luke (2019) Determining the Effectiveness of Vortex Generators with regards to Automotive Applications. [USQ Project]

Mohajer, Arman (2019) Developing a model for sustainable IT infrastructure in a rural setting in Northern India. [USQ Project]

Browne, Nicholas Raymond (2019) Developing a model for the utilisation of auxiliary through lanes at signalised intersections. [USQ Project]

Wood, Timothy (2019) Development of an Asset Prioritisation Framework for Gympie Regional Council’s Water and Sewerage Assets. [USQ Project]

Broad, Jacob (2019) Drag Force Analysis of Vehicle Roof Accessories. [USQ Project]

Narayan, Sanjay (2019) Earthing Systems and Earth Fault Protection in Power System Distribution Network. [USQ Project]

Way, Erin (2019) Effects of Climate Change and Land Use on Rainfall and Management of Flooding in an Urban Coastal Catchment. [USQ Project]

Walker, Samuel (2019) Estimation of peak flow in Queensland using Quantile Regression Technique and ARR 2019. [USQ Project]

Byrne, Mitchell John (2019) Evaluation Of A Self-Built, Low-Cost, RTK UAV System To Produce Digital Elevation Models. [USQ Project]

Tan, Jacob (2019) Evaluation of Issues in Using Advanced and Sustainable Engineering Materials. [USQ Project]

Blundstone, Geoffrey (2019) Feasibility of improving cycle infrastructure in Fortitude Valley Brisbane. [USQ Project]

Ferrari, Amy (2019) Feasibility of Remote Earth Monitoring for SWER Systems. [USQ Project]

Maruping, Pako Omogolo (2019) Flexural behaviour of Graphene-reinforced concrete beams. [USQ Project]

Matthews, Brendan Shane (2019) Flexural Investigation and Design of Stressed-Skin Panels With an Autoclaved Aerated Concrete (AAC) Core. [USQ Project]

Oliver, Jarred (2019) Harmony Analysis in A'Capella Singing. [USQ Project]

Becker, Peter (2019) Home Based Solar and Battery Optimisation. [USQ Project]

Braddon, Megan (2019) How might an underground working environment effect laser scan data when assessing Joint Roughness Coefficient, and is it feasible to use a mobile platform? [USQ Project]

Mpofu, Mkululi (2019) Impact of Large-Scale Solar Energy Penetration on the Electricity Network With a View of Replacing Synchronous Generators. [USQ Project]

Tomarchio, Mark Daniel (2019) Improved theory for the design of high-speed roundabouts to suit heavy vehicles. [USQ Project]

Leckie, Cameron (2019) Improving infiltration modelling for crusting soils. [USQ Project]

Smouha, Jonathan (2019) Independent Evaluation of the Leica GS18 T Tilt-Compensated GNSS RTK Rover. [USQ Project]

Whitby, Mathew (2019) Infill Development Impact on the Capacity of Regional Drainage Networks. [USQ Project]

Tabwere, Rimeta (2019) Investigating productivity of double slope solar still with sponge cubes. [USQ Project]

Lu, Peter (2019) Investigating the life cycle costs of road culverts in difference asset management schemes. [USQ Project]

Channer, Liam (2019) Investigating Wave Rotor Performance Characteristics and Design for Air Pumping Applications. [USQ Project]

Martin, Brent (2019) Investigating what effect two face measurement has on Reflectorless EDM with respect to angle of incidence and determining the critical incident angle. [USQ Project]

Karaka, Jayden Manawa (2019) Investigation into the effects of stormwater attenuation within the lower third of a catchment on downstream waterways. [USQ Project]

Mitchell, Riley Malcolm (2019) Investigation into the Influence of Double Bagging Processes on Co-cured Scarf Repairs. [USQ Project]

Lariviere, Bernard (2019) Investigation of Time of Concentration within a ballast track environment for efficient Storm Water Drainage. [USQ Project]

Cormick, Jacob (2019) Land Subsidence Detection and Monitoring Using InSAR in Australia. [USQ Project]

Train, Aidan (2019) Lot Infiltration Trenches Impacts on Water Quality. [USQ Project]

Mathews, Jared (2019) Low-cost Firmness Based Avocado Ripeness Tester. [USQ Project]

Colagiuri, Luciano (2019) Low-investment EMI pre-compliance for COTS technology insertion into submarine combat systems. [USQ Project]

Dinham, Aaron (2019) Management of unsealed roads in drought conditions. [USQ Project]

Hobbs, Amy (2019) Measuring Changes in Sea Level Around Antarctica. [USQ Project]

Tait, Matthew (2019) Methodology To Obtain Homogeneous Temperature Distribution Across A Revers Flow Offset Barbecue. [USQ Project]

Strange, Enoch Matthew (2019) Monitoring survey of heritage listed fencing using terrestrial laser scanners and CloudCompare software. [USQ Project]

Hooper, Jason (2019) Off-grid Solar Power Design and Battery Storage Optimisation. [USQ Project]

Parker, Brent Alexander (2019) Optimisation for the Positioning of the Proposed Eurobodalla Southern Storage Future Water Treatment Plant. [USQ Project]

Elsasser, M. (2019) Optimised renewable generator schemes to improve the utilisation of network assets while maintaining safe operation of primary plant in accordance with the National Electricity Rules. [USQ Project]

Johnston, Grant (2019) Optimization of a SNCR/LN NOx Reduction System using Model Predictive Control. [USQ Project]

Eberhard, Marek (2019) Overall Performance and Emission Effects of Light Naphtha Additives in a Diesel Engine. [USQ Project]

Verrall, Jacob (2019) Performance Evaluation of GFRP Reinforced Railway Sleepers. [USQ Project]

Zhou, Xuebo (2019) Pipeline Monitoring Surveys with Modern Technology. [USQ Project]

Taylor, Simeon (2019) Preliminary design of a device to control the orientation of a 250Kg craned load around the vertical axis. [USQ Project]

Venaglia, Michael (2019) Quantify and Explain the Differences in Horizontal Accuracies Between Commercial CORS Networks. [USQ Project]

Brooker, Rob (2019) Real-Time Collision Avoidance for Programmable Machines from 3D Model Analysis. [USQ Project]

Cowling, Joel (2019) Redefining the intervention level for upgrading unsealed roads to sealed roads in Rural NSW, main focus, Parkes Shire Council. [USQ Project]

Kuzniarski, Conan (2019) Remote Sensed Monitoring of Seagrass Cover in the Gippsland Lakes, Victoria, Australia. [USQ Project]

Yousif, Talal (2019) Renewable Alternative Fuel for Diesel Engine. [USQ Project]

Noller, Lachlan (2019) Restart of a 2D Hypersonic Inlet a Mach 6 using Active Slot Flow Control. [USQ Project]

Gruber, Gregory William John (2019) Review of DJI Phantom 4 RTK for the Surveying Industry. [USQ Project]

Andrews, Cameron (2019) Rolling Shear Properties of F2 Hybrid Pine used in Cross Laminated Timber (CLT). [USQ Project]

Keily, Rhys (2019) Sewer inflow and infiltration for catchments with high rainfall and aging infrastructure. [USQ Project]

Easterbrook, Damian (2019) Single Spatial Sensor Control of Robotic Arms. [USQ Project]

Armstrong, David (2019) Smart Model/Package for Home Based Solar Grid System Design. [USQ Project]

McCorquodale, Glenn (2019) Soil Moisture and Nitrogen Estimation Using Plant Growth Statistics. [USQ Project]

Phan, Thuong (2019) Structural Behaviour of Graphene-Epoxy Coated Timber Members. [USQ Project]

Sharp, Clancy (2019) Sugarcane Yield Estimation by UAV Photogrammetry Survey. [USQ Project]

Cook, Benjamin John (2019) Suitability of low-cost UAVs in surveying applications. [USQ Project]

Fiedler, Aaron (2019) Suitability of polyester-based thermoplastic polyurethanes as a fuel-resistant asphalt binder in flexible aviation pavement surfaces. [USQ Project]

Alaoud, Huseen M. H. A. E. A. (2019) Testing Australian commercially available biodiesel properties, combustion, performance and emission characteristics. [USQ Project]

Anderson, Liam Jacob Frylink (2019) The Effect of GFRP Bar Diameter on the Compressive Behaviour of Hollow Circular Concrete Columns with Hollow Composite Section. [USQ Project]

Ng, Michael (2019) The Effect of Reinforcement Ratio on the Compressive Behaviour of Glass Fibre Reinforced Polymer (GFRP) reinforced Concrete Columns with Hollow Composite Reinforcing Section (HCRS). [USQ Project]

McNamara, Peter (2019) The effect of wide centreline treatments on run-off-road left incidents on rural Queensland highways and potential for a review of road shoulder width guidelines. [USQ Project]

Morgan, Gene (2019) The effectiveness of energy recovery ventilators (ERV) for air conditioning systems in multi-purpose halls in North Queensland. [USQ Project]

Murad, Abdullah (2019) The experimental & simulation investigation of engine performance characteristics of conventional diesel and waste plastic fuel. [USQ Project]

Jolley, Kim (2019) The Potential Impact of Autonomous Vehicles on Urban Form and Land Use in Sydney (CBD) - A Case Study. [USQ Project]

Daley, Dylan Craig (2019) The Use of Geopolymers for Stabilising Expansive Soils. [USQ Project]

Regan, Darryl (2019) The Viability of Small-Scale Wind Turbines for Domestic Use in South East Queensland. [USQ Project]

Thomson, Sean (2019) Utilising a Mobile Device to Aid in Early Diagnosis of Corneal Abnormalities. [USQ Project]

Jacobson, Matthew (2019) Validation of the SCS TR-55 method on Whangarei District Watersheds and Soil Types. [USQ Project]

Brisby, Michael (2019) What is the Impact of Light Rail on Pedestrian Mobility and Safety in a CBD – Case Study George Street, Sydney. [USQ Project]

2018

Jurman, Shaun (2018) A case study approach to modular housing design & manufacturing systems. [USQ Project]

Barre, Christopher (2018) A Comparative Study of and Modern Techniques for Accurate Internal Space Measurements. [USQ Project]

Kirkpatrick, Gail (2018) A predictive tool for water utilities to gauge electricity expenditure in a dynamic energy market. [USQ Project]

Roberts, Andrew (2018) A study of the accuracy of oblique image capture in UAV Photogrammetry. [USQ Project]

Cook, Matthew Peter (2018) A study on formability issues in advanced high strength steel. [USQ Project]

Flood, Zack (2018) A Study on the Effect of External Parameters on Expansive Soils. [USQ Project]

Robertson, Alister (2018) A Sustainable Approach to Single Lot Residential Stormwater Disposal. [USQ Project]

Minchev, Grant (2018) A Sustainable Focus on Rural Town Main Streets & Highway Initiatives. [USQ Project]

Kereczko, John (2018) AC Chopper Series Voltage Reg Applications. [USQ Project]

Burgess, Liam P. (2018) Accurate 3-D Modelling from DSLR Images for Residential Design Purposes. [USQ Project]

McCairns, Michael (2018) Achieving effective control of deaeration chemical dosing using artificial neural networks. [USQ Project]

Conway, Benjamin (2018) An Analysis of Thermal Storage of Solar Energy. [USQ Project]

Cook, Alex (2018) An Analysis on the Effect of Free Station Traversing on the Uncertainties Associated with Control Points, in both an Open and a Closed Traverse. [USQ Project]

Steel, Simon (2018) An Assessment of Elsholz Redirective Concrete Kerb on Road Safety. [USQ Project]

Herbert, James Feleciano (2018) An Instrumented Approach to the Classification of Alcoholic Beverages: Combining PTR-ToF Mass Spectrometry, with Machine Learning. [USQ Project]

Ogilvie, Heath Stewart (2018) An Investigation Aimed at Improving Subsidence Monitoring by Combining LiDAR with Traditional Survey Methodologies. [USQ Project]

Scott, Cameron (2018) An investigation into an alternative on-site stormwater detention structure to increase capacity and reduce spatial footprint and economic impact. [USQ Project]

Smith, Lachlan (2018) An Objective Criteria for the Determination of Non-Tidal Riparian Boundaries in NSW. [USQ Project]

Whittle, William (2018) Analysis of a Thermal Oxidiser Systems’ Behaviour using Numerical Methods. [USQ Project]

Hagan, Mark (2018) Analysis of Traffic Control Systems for better coordination of Traffic Signals. [USQ Project]

McLean, Aaron (2018) Analysis of Traffic Flow through Roundabouts for Improving Performance. [USQ Project]

Ma, Xin (2018) Applications of Photogrammetric UAVs in Surveying Area: a comparison on topography survey, using UAV method and Conventional surveying method. [USQ Project]

Kimber, Robert Allen (2018) Applied Neural Network Modelling of Mobile Plant Equipment for use in Predictive Maintenance. [USQ Project]

Sands, Jeremy (2018) Automating Processes for Cross-checking Plans and Invert Levels for Laying Drainage Mains on Grade. [USQ Project]

Chandigere, Tarisai (2018) Backup Relay for 66kV Hub Substation Protection in the High Voltage Distribution Network. [USQ Project]

Baker, Angel Lee (2018) Behaviour of GFRP Reinforced Concrete Railway Sleepers: Finite Element and Fibre Model Analyses. [USQ Project]

McMahon, Sean (2018) Camera-based plant sensing system for estimating crop maturity. [USQ Project]

Almutairi, Fahad M. H. M. H. (2018) Castor oil biodiesel for diesel engine. [USQ Project]

Hughes, Brittany (2018) CBD Revitalisation - The Relationship Between Laneway Activation and Sense of Place. [USQ Project]

Singh, Hardeep (2018) Challenges in Project Management of Infrastructure Projects in Fiji. [USQ Project]

Campbell, Thomas (2018) Characteristics of Oil Contaminated Fine Aggregates in Concrete, Reinforced with Helix Micro-Rebar. [USQ Project]

Heslin, Terry (2018) Comparative evaluation of the axial behaviour of circular and square hollow concrete columns reinforced with GFRP bars. [USQ Project]

Singla, Prince (2018) Comparative study on precast concrete and cast in-situ reinforced concrete panels for building construction in Queensland. [USQ Project]

Fulton, David (2018) Comparison of the Practical Application of ARR1987 and ARR2016 for Urban Stormwater Catchments in Bundaberg. [USQ Project]

Baartz, Rory (2018) Concept design of cargo aircraft on-board loader. [USQ Project]

Hutchison, Alana (2018) Conceptual Design of a Digital Meter for Power, Gas and Water Utilities. [USQ Project]

Calcutt, Ryan (2018) Contribution of Facilities Management Services to Green Building Rating Score. [USQ Project]

Finnerty, Sean (2018) Cooling of high temperature bore water using thermoelectric generated power. [USQ Project]

Almarri, Abdulaziz (2018) Coordinated Control of UAV Swarm Using Multi Agent Control Scheme [Part II]. [USQ Project]

Jeanes, Gareth (2018) Cost Effective Polyethylene Terephthalate (PET) Object Orientation Detection System. [USQ Project]

Orme, Thomas (2018) Cryogenic Temperature Measurement for LNG Loading. [USQ Project]

McNalty, Luke (2018) Design and development of a stair specific assistive aid. [USQ Project]

Oon, Benjamin (2018) Design and Refinement of a Trailer Mounted Crane. [USQ Project]

Smith, Michael (2018) Design of a Smart Parking System for a Regional University Car Park. [USQ Project]

Mackay, Roydon (2018) Design of an industrial vehicle mounted filtration system for sewer cleaning. [USQ Project]

Kamdar, Obaid Ishrat (2018) Design of Multifunctional Cycle Frame. [USQ Project]

Curtis, Timothy Davidson (2018) Detecting and Mapping Crop Stress using Sentinel Remote Sensing Imagery. [USQ Project]

Stanton, Michael (2018) Developing a Maintenance Framework for Culverts. [USQ Project]

Power, Jay (2018) Development of an Asphalt Pavement Quality System. [USQ Project]

Cooper, Dean (2018) Development of Precast Concrete Boat Ramp Planks Reinforced with GFRP Bars. [USQ Project]

Benn, Joshua (2018) Differential Interferometric Synthetic - Aperture Radar (DInSAR) for disused mine subsidence monitoring and detection. [USQ Project]

Gibbs, Alexander (2018) Direct Volume Computation Using UAV Point Cloud Data & A Known DTM. [USQ Project]

Shu, Ji Linn (2018) DTM Accuracy Comparison Between Onboard RTK GNSS UAV versus Low Cost Quadcopter UAV at Different Geomorphological Sites: A Malaysian Approach. [USQ Project]

Oosthuizen, Alexandra L. (2018) Effect of Concrete Compressive Strength on the Behaviour of GFRP Reinforced Hollow Concrete Columns. [USQ Project]

Alwazzan, Essa (2018) Effect of fibre content on compressive and flexural properties of coconut fibre reinforced epoxy composites. [USQ Project]

Cole, David Michael (2018) Effect of intersection angle on a time-gap based intersection sight distance model. [USQ Project]

Lilley, Andrew (2018) Effects of Chemically Treated Recycled Water on the Setting Process and Overall Behaviour of Concrete Beams. [USQ Project]

Evans, Michael (2018) Effects of varying ground water levels on laterally loaded bored piles. [USQ Project]

Murray, Adam (2018) Electron Tube performance monitoring via remote means. [USQ Project]

Selezneva, Natalie (2018) Encapsulated Phase Change Material for Temperature Control and Verification of Solar Disinfection Treatment. [USQ Project]

Roulstone, Scott (2018) Energy Efficiency Through Home Automation. [USQ Project]

Clark, Peter (2018) Estimating the Input Voltage and Current of Transformers from Output Side Measurements. [USQ Project]

Thimios, Jace (2018) Evaluating the impact of new technology on construction project performance, methodologies and productivity: An insight into the forthcoming era of change projected for the construction industry. [USQ Project]

Lester, Trenton (2018) Evaluation of the Effect of Vegetation Sky Obstructions and Multipath on AUSPOS and Trimble CenterPoint RTX Post-Processing. [USQ Project]

Ginakis, Philip (2018) Evaluation of the Irrigation Hydraulics Assessor (IHA) as a Pipeline Behaviour Estimation Tool. [USQ Project]

O'Callaghan, Jack Maurice (2018) Evaluation of UAV vs Conventional Surveying methods in locating Waste Material at a Landfill site. [USQ Project]

Mitchell-Donnelly, Jonathan (2018) Exoskeleton Arm Control system: Design, Construct and Evaluate. [USQ Project]

Lincoln, Mitchell (2018) Fatigue Analysis of Tower Crane Grillage Wall Bracket Connection. [USQ Project]

Veivers, Shannon (2018) Fault Analysis of Vision System on Autonomous Blast Hole Drills. [USQ Project]

Mueller, Karl (2018) Feasibility Analysis of a Novel Method for Bovine Carcase Fat Thickness Estimation. [USQ Project]

Sami, Sanil V. (2018) Feasibility of Developing a Licensing Scheme for Fijian Contractors and Sub-Contractors. [USQ Project]

Phillips, James (2018) Guardian Angel: Reactive Wearables and Clothing. [USQ Project]

Hook, Warren (2018) Home based solar power generation, storage, and localised energy grids. [USQ Project]

Potts, Jayde (2018) Hybrid wind solar power study for remote rail communications sites. [USQ Project]

Sehmish-Lahey, Laura (2018) Identification of Kangaroos using Machine Vision. [USQ Project]

Hoskins, Paul Francis (2018) Identifying Rights, Obligations and Restrictions on Freehold Land in Queensland. [USQ Project]

Nyakureba, Mike (2018) Impact of Harmonics from 12-pulse Converter-Fed DC Drives. [USQ Project]

Beff, Susan (2018) Impacts of Implementing High Efficiency Sediment Basins for Land Development Sediment Control within the Canberra Region. [USQ Project]

Bien, Robert (2018) Implementing a Combined Structural Design and Detailing Workflow to Improve Project Outcomes. [USQ Project]

Bontch-Osmolovskaia, Daria (2018) Improved Mixing Closure for Multiple Mapping Conditioning Turbulent Combustion Model. [USQ Project]

Alwazzan, Ali (2018) Improving biodiesel combustion using commercial diesel treatment additive. [USQ Project]

Gibbs, Adam (2018) Industrial Automation Human-Machine Interface Design for Disabled Workers. [USQ Project]

Dlodlo, Nkomozombango (2018) Integration of Trimble V10 Imaging Rover on terrestrial survey. [USQ Project]

Charan, Vikash Sikendra (2018) Investigate the effect of harmonics on high voltage regulators. [USQ Project]

Sheriff, Bradley (2018) Investigating Scour Behaviour Around Culverts Using a Validated Numerical Model. [USQ Project]

Hadonou, Patient (2018) Investigating the maintenance costs and condition states of deteriorated small road structures. [USQ Project]

Barnes, Michael (2018) Investigating the Transient Sonochemical Efficiency of a Magnetostrictive Transducer under Resonant Conditions. [USQ Project]

Becker, Keegan (2018) Investigation into the effect of materials and angle of incidence on reflectorless measurements. [USQ Project]

Leslie, Michael James (2018) Investigation of Modern Wireless Communication Technologies to facilitate Distribution System SCADA as part of the Intelligent Grid in South-East Queensland. [USQ Project]

Rudd, Nathan (2018) Investigation of the quantity of error caused by vegetation coverage with UAV. [USQ Project]

Davis, Wesley (2018) Leadership and the development of Local Government Engineering Managers. [USQ Project]

Coman, Aaron (2018) Linear Bending Behaviour of Functionally Graded Polymer Composite Beams Reinforced with Graphene Nanoplatelets. [USQ Project]

Pamogas, Nathan (2018) Long-term Flexural Performance of Epoxy-coated GFRP Composite Laminates. [USQ Project]

Kent, Mathew (2018) Machine vision and data acquisition for the optimisation of black soldier fly breeding. [USQ Project]

Weise, Matt Ryan (2018) Mechanical Behaviour of Wagners Composite Fibre Bridge Decking under Point Load Testing. [USQ Project]

Ebrahim, Zainab Alsayed (2018) Mechanical behaviours of grout mixed with fly ash for strata reinforcement. [USQ Project]

Ram, Asis (2018) Model an inverter system with demand response capability aligned with the framework detailed in AS 4755.1:2017 using DIgSILENT PowerFactory modelling software. [USQ Project]

Lu, David (2018) Modelling Digital Cadastral Boundary for Building Subdivisions in Victoria. [USQ Project]

Franzen, Thomas (2018) Network Management of Low Volume Local Roads in NSW. [USQ Project]

Greene, Isaac (2018) Numerical Investigation on the Behaviour of Floodways Under Extreme Flood Events. [USQ Project]

Chung, Dennis Ming Tak (2018) Numerical investigation on the effect of scouring on the structural behaviour of corrugated steel culvert. [USQ Project]

Gallon, Warren (2018) Optimal location for a UHPQC in a distribution network for minimisation of harmonics and reactive power improvements. [USQ Project]

O'Brien, Benjamin James (2018) Optimising Rural SWER Distribution Systems in Queensland. [USQ Project]

Irwin, Jacob (2018) Orthotic Prosthetics Using Active Mechanical Systems. [USQ Project]

Harawira, Matthew (2018) Pilot plant to investigate and evaluate the potential of domestic heating using low cost solar generation as a supplemental heat source. [USQ Project]

Stahlhut, Madison (2018) Potential for Energy Generation using Pumped Storage Hydropower in the Toowoomba Water Supply. [USQ Project]

Gabriel, Kelly (2018) Potential of Softwood Engineered Timber with Graphene. [USQ Project]

Redenbach, Mitchell (2018) Practical Applications of Low-Cost Water Level Flood Early Warning Systems. [USQ Project]

Winter, Robert (2018) Quantifying errors in reflectorless electronic distance measurement for various environments. [USQ Project]

King, Charles (2018) Reducing Close Out Defects in Commercial Construction. [USQ Project]

Laing, Mac (2018) Remote Livestock Monitoring Utilising Internet of Things Technology. [USQ Project]

Hyde, Justin (2018) Road Safety Research at Unsignalised Intersections within Wagga Wagga. [USQ Project]

Sansom, Benjamin (2018) RSPEC and Pavement conformance analysis using a photogrammetric mapping system from an UAV. [USQ Project]

Nash, Joseph (2018) Safety Benefits of Narrow Median Wire Rope Safety Barriers on Rural Highways. [USQ Project]

Bone, Cameron (2018) Shear Behaviour of Precast Concrete Beam with Hollow Composite Reinforcing Systems. [USQ Project]

Alenezi, Faisel M. H. A. A. (2018) Shear strength properties of low roughness rock joints. [USQ Project]

Nolan, Patrick (2018) Shunt Reactor Switching Transient Analysis. [USQ Project]

Will, Nicholas (2018) Simple communication mesh for disaster zones. [USQ Project]

Fairhall, Thomas (2018) Slenderness Effect on the Behaviour of Hollow Circular Concrete Columns Reinforced with GFRP Bars. [USQ Project]

Van Den Heever, Willem Christoffel (2018) Smart Collision Avoidance System for mining using LTE for inter-vehicular communication. [USQ Project]

O'Sullivan, Kyra (2018) Soil physical and chemical properties as effected by long-term land application of paunch. [USQ Project]

Gwalter, David (2018) Spatial Audit and Analysis of Cycling and Pedestrian Routes in Regional NSW. [USQ Project]

Young, Christine (2018) Speech Analysis for Identification of Emotion. [USQ Project]

Macdonald, Robert (2018) Strength Properties of Fused Deposition Modelling Components Produced with XT-CF20 Carbon Fibre Filament. [USQ Project]

Kelly, Michael (2018) Survey and calculation of volumes of fined grained materials using ‘non-contact’ methods. [USQ Project]

Alfahed, Abdullah (2018) Tensile Strength Properties of Grout Products Commonly Used in Australian Civil and Mining Industries. [USQ Project]

Pedroza, Daniel (2018) Terrestrial Laser Scanners and its applications for pavement conformance in accordance to Roads and Maritime Services QA Specifications G71 – Construction Surveys. [USQ Project]

Fredericks, Beau (2018) Testing and Investigating the Angular Accuracy and Efficiency of the Trimble SX10 Camera Pointing System. [USQ Project]

McCowen, Andrew (2018) The Design and Feasibility of an Autonomous Livestock Handling and Monitoring Device Using Modern Object Tracking Technology. [USQ Project]

Douglas, Scott (2018) The development of a systematic framework to guide the inspection process of levees, specific to the climatic and environmental conditions of rural Queensland. [USQ Project]

Alrashidi, Batel (2018) The effect of octane number and energy content of the fuel containing ethanol as additive on combustion properties, engine performance and emission. [USQ Project]

Mahony, Michaela Bronte (2018) The Monitoring and Analysis of Rainfall Excess for Hydrologic Modelling. [USQ Project]

Mellor, Riley (2018) The Need for Real-Time Progress Reporting in Relation to Time, Cost and Quality. [USQ Project]

Bredenkamp, David (2018) The Readjustment of a Geological Coal Model Through Mapping an Open Cut Highwall Using UAV System to Generate Theoretical Boreholes. [USQ Project]

Stack, Nicholas (2018) The Role of Distributed Battery Storage to Augment & Support the Network during Peak Demand. [USQ Project]

McGeary, Rowena (2018) The Soil-Water Cost of Heavy Machinery Traffic on a Vertosol. [USQ Project]

Blackburn, Ben (2018) The Survey Uncertainty of Existing Boundaries. [USQ Project]

Tanwangco, Christian (2018) The use of a Terrestrial Laser Scanner and Visual Alignment In Urban Cadastral Surveys. [USQ Project]

Almutairi, Mezaid F. M. (2018) Time Optimal Controller Design and Implementation for an Auto TCD Probe. [USQ Project]

Bell, Mark (2018) Transient Behaviour of Three Phase STATCOMs. [USQ Project]

Anderson, Peter (2018) Type 1-4 Wind Turbine Generators: Fault Analysis for Grid Integration. [USQ Project]

Finan, Michael (2018) Understanding the Performance of 3D Printed Carbon Fibre Reinforced Polymer (CFRP) and Carbon Continuous Fibre Filament (CFF). [USQ Project]

Schiller, Tianna (2018) Use of Dynamic Performances for Structural Health Monitoring of Concrete Structures. [USQ Project]

Whiteley, Jason (2018) Use of small sphere targets to georeference Terrestrial Laser Scan, Photogrammetry and Total Station point clouds within a rail corridor environment. [USQ Project]

Stephens, Kristopher (2018) Using Non-Infrared UAV Imagery To Assess The Health of Dairy Farming Pasture. [USQ Project]

Bolte, Aaron (2018) Using Reactive Power To Prevent Excessive Rise In Feeder Voltage Due To Grid-Connected PV Generation. [USQ Project]

Darr, Lachlan (2018) Utilisation of Turbo Roundabouts to Increase Safety at Existing Two-Lane Roundabouts in Queensland. [USQ Project]

Steggles, Benjamin (2018) Virtual Learning Environment for Emergent Behaviour AI and Transference into Real-World Application. [USQ Project]

Watson, Alexei (2018) Voltage Control of Rural Networks by Virtual Power Plant. [USQ Project]

Yong, Hwa Khai (2018) Waste Car Tyre Chips as Soil Stabilisers. [USQ Project]

Ryan, Brendan (2018) Wave Gauge: Characterising vessel movements and their erosive components. [USQ Project]

Campbell, Edward (2018) Wi-Fi weather alarm for notification of optimal crop spraying conditions in agriculture. [USQ Project]

2017

Bartolo, Jack (2017) 2+1 Rural Highway Treatments in Queensland, Australia. [USQ Project]

Davison, Andrew (2017) A comparative study of using an Unmanned Aerial Vehicle (UAV) in surveying projects. [USQ Project]

Hager, Marcus Timothy (2017) A Comparative Study on UAV Photogrammetry. [USQ Project]

Dark, Michael (2017) A comparison of mobile phone 3D images and total station data for spatial interpretation of structures. [USQ Project]

Champion, Scott (2017) A Cost Benefit Analysis of Vertical Measurement Tools for Differential Levelling. [USQ Project]

Welsby, Trevor (2017) A Distributed Sensor Array for Rapid and Low Cost Oceanic Air Crash Localisation. [USQ Project]

Wahbe, Martin (2017) A Qualitative Assessment of Close Range Photogrammetry for use in measuring Stratas/Stratums. [USQ Project]

Bill, Nana (2017) Accounting for Climate Variability in the Design of Rain-fed Water Supply Systems in Papua New Guinea. [USQ Project]

Van Bael, Tammee (2017) An Accessibility Investigation of the Gold Coast Light Rail System. [USQ Project]

Bartlett, Luke (2017) An Accuracy Comparison between GPS Surveying and UAV Surveying on Seawall Monitoring. [USQ Project]

Miles, Stuart (2017) An Investigation into harvesting electrical energy from plants through the Rhizo-deposition process in Australian environmental and climatic conditions. [USQ Project]

van Rensburg, Henriette Janse (2017) An investigation into increasing the fatigue life of an electric shovel dipper handle. [USQ Project]

Pinkstone, Jared William (2017) An Investigation into the use of a RTK GNSS and a Digital Depth Sounder for Mapping a Tidal River Bed. [USQ Project]

Norley, Jake (2017) Analysis of a High Performance Hydraulic System by Numerical Methods. [USQ Project]

McEvoy, Chris (2017) Analysis of Engineered Cementitious Composite Bond Strength for Grouting Reinforcement to Concrete Members. [USQ Project]

Peters, Ken Kehinde (2017) Analysis of Kinetic Energy Recovery System Retrofit in conjunction with an Internal Combustion Engine Vehicles. [USQ Project]

Lamont, Julian (2017) Analysis of the Accuracy of Emerging Consumer Photogrammetry Techniques. [USQ Project]

Harris, Matthew (2017) Assess the Viability of Aerial Baiting for Dingoes in South West Queensland Using GIS Based Weighted Linear Combination Modelling. [USQ Project]

Harris, Jesse (2017) Assessing the impacts of Multi-Combination Vehicles on Motorways. [USQ Project]

Karunaharan, Janahan (2017) Asset Management Modelling. [USQ Project]

Kohn, Hayden (2017) Automation & Optimisation of Soil Hardness Testing Device. [USQ Project]

Aqeil, Mohammad Tahir (2017) Autonomous Solar Panels Cleaning System. [USQ Project]

Reibelt, Tyla (2017) Behaviour of concrete columns with different levels of steel corrosion and repaired with a composite Jacket. [USQ Project]

Pierini, Adrienne (2017) Chemical Stabilisation Alternatives for Marginal Materials Found Within the Cobar Region. [USQ Project]

Butaish, Mohammed Naji (2017) Choice of Vehicle Type for the USQ Pool Car Fleet. [USQ Project]

Lawrence, Rachael (2017) Climate Projection of Extreme Sea Level Events Along the Queensland Coast. [USQ Project]

Khan, Imran Asghar (2017) Commissioning and Testing of Protection Relays for Distribution Systems. [USQ Project]

Porter, Jacob (2017) Compressive behaviour of reinforced concrete columns with a prefabricated fibre reinforced jacket. [USQ Project]

Johnstone, Paul (2017) Conceptual Design of a Total Wrist Arthroplasty. [USQ Project]

Hawkins, Samuel Richard (2017) Control of Underground Mining Coal Dust Using Wetting Agents. [USQ Project]

Hawkins, Matthew (2017) Cricketing Head Injury Analysis and Conceptual Prevention Design. [USQ Project]

Kumar, Navneet Vishal (2017) Critical Factors Affecting Construction Productivity in Fiji. [USQ Project]

Thomson, Philip (2017) Design flood estimation based on GRADEX. [USQ Project]

Berry, Claire (2017) Design of a Human Powered Lift for Improved Safety when Working at Heights. [USQ Project]

Leslie, Andrew (2017) Design of high accuracy wireless tilt sensor system for measuring rail sleeper movement in remote areas. [USQ Project]

Bevis, Justin (2017) Detection of High Impedance Earth Faults Utilising Metering Assets. [USQ Project]

Sondhi, Ankit (2017) Develop a policy to address the risk of rear-end crashes on high-speed rural road. [USQ Project]

Dutton, Simon (2017) Development and Performance Assessment of an Animal Monitoring System. [USQ Project]

Hutchinson, Evan John (2017) Development of a low cost modular IEC61850 simulation system using touchscreen Raspberry Pi. [USQ Project]

Nolan, Shane (2017) Development of a low cost, remotely accessible condition monitoring system for a power transformer. [USQ Project]

Somasundaraswaran, Aruthra (2017) Development of Crash Modification Factors Using Selected Remedial Measures at Signalised Cross Intersections in Toowoomba. [USQ Project]

Knight, Richard L. (2017) Development of Low CO2 Durable Concrete Using Geopolymer and Related Chemically-Activated Cements. [USQ Project]

Dashchinskiy, Mikhail (2017) Early Detection and Prevention of Catastrophic Failures of Industrial Engines. [USQ Project]

Baker, Kurt (2017) Effectiveness of Bitumen Emulsion as a Stabilisation Agent in Recycled Sealed Rural Roads. [USQ Project]

Everett, Lucas (2017) Effectiveness of Variable Speed Limit Control Devices in Queensland. [USQ Project]

Govan, Joel Blake (2017) Effluent Water Reuse for Townsville. [USQ Project]

Morris, Steven (2017) Electronic GateMate. [USQ Project]

Parry, Ian Bruce (2017) Estimating the State of Charge of the Nickel Iron Battery. [USQ Project]

Brigg, Hayden (2017) Estimation of Peak Design Discharges within the Mackay Region. [USQ Project]

Wickramasinghe, Manod (2017) Evaluation of DTM Accuracy Based on Different Flying Heights of UAV on a Uniform Surface. [USQ Project]

Truasheim, Nathanael (2017) Evaluation of the Emergency Vehicle Priority System on the Sunshine Coast. [USQ Project]

Marriott, Phillip (2017) Evaluation of Trimble Active Targets with an obstructed line of sight. [USQ Project]

Tingle, Leigh Robert James (2017) Evaluation of Unmanned Aerial Vehicle (UAV) Data Accuracy for the Surveying Profession. [USQ Project]

Lawler, Mitchell (2017) Experimental Analysis of the Performance and Emissions of Waste Cooking Oil Biodiesel with ABE Additive as an Alternative to Mineral Diesel. [USQ Project]

Martin, John (2017) Fabric Filter Shaker Drive Crank Assembly Operation Analysis. [USQ Project]

Blades, Tyson (2017) Fatal crashes at T-junctions within New South Wales. [USQ Project]

Maguire, Brett (2017) Finite element simulation of a Sustainable Hybrid Sandwich Panel under bending using Strand7. [USQ Project]

Xeros, Alastair G. (2017) Flexural Behaviour of Precast Concrete Slabs Reinforced with Hollow Composite Systems. [USQ Project]

Kocoski, Micheal (2017) Future management of survey infrastructure within NSW. [USQ Project]

Stewart, Simon Hugh (2017) Future Trend of Retaining Walls in South East Queensland. [USQ Project]

Ogilvie-O'Neil, David (2017) Fuzzy Solar Hot Water Heater Controller. [USQ Project]

AL Majdali, Musaed M. SH. M. SH. (2017) GSM Based Automatic Digital Metering for Power and Gas Utilities. [USQ Project]

Wyper, Mitchell Wayne Robert (2017) Guidelines for Condition Monitoring of Vacuum Circuit Breakers at Distribution Voltages. [USQ Project]

Canning, Justin (2017) Helicopter Vibration Monitoring During Patient Transport. [USQ Project]

Snuderl, Leon (2017) Hot Graphite Models in Axisymmetric Configurations for Re-entry Simulation in Wind Tunnels. [USQ Project]

Higgs, Callan (2017) Human Comfort - CFD Modelling to Provide Energy Efficient Air-Conditioning in a Modern Office. [USQ Project]

Leggat, Nicholas Aiden (2017) Hydraulic Investigation into the Practical Applicability of the ISLEX Smart Siphon. [USQ Project]

Buckle, James (2017) Identification of Infiltration within Albury Sewerage Infrastructure. [USQ Project]

Hampson, Kevin (2017) Impedance Spectroscopy Meter for Batteries Meter Development and Testing on Ni-Fe Batteries. [USQ Project]

Bowkett, Norman (2017) In situ testing of hot water system sacrificial anodes. [USQ Project]

Alshammari, Fahad M. M. S. N. S. (2017) Influence of ageing process on the adhesive wear behaviour of kenaf fibre reinforced epoxy composites. [USQ Project]

Albasheer, Yaqoup (2017) Influence of fibre length on mechanical properties of natural and synthetic fibres reinforced epoxy composites. [USQ Project]

Chigondo, Brian (2017) Integration of a Light Rail Transit with Autonomous (driverless) Vehicles. [USQ Project]

Black, Jared (2017) Investigating the cause of Requests for Information (RFIs) in Civil Construction Projects. [USQ Project]

Haskard, Rhys (2017) Investigation into ICSM’s guideline for conventional traverse surveys. [USQ Project]

McDonnell, Jessica (2017) Investigation into the effects of microwave drying soil. [USQ Project]

Bahri, Nikita (2017) Investigation of methane production by anaerobic co-digestion of food waste, fats, oil & grease, and thickened waste activated sludge using Automatic Methane Potential Test System. [USQ Project]

Hignett, Logan John (2017) Investigation of the effect of Naturally Occurring Asbestos (NOA) on Civil Engineering Projects. [USQ Project]

Devi, Ashtika (2017) Investigation on the management and maintenance of engineering assets of the biomedical industry. [USQ Project]

Allen, David (2017) Laser Scanning, Reflectorless and Image Point Creation in the Built Environment. [USQ Project]

Elphick, James (2017) Latent Heat Storage in Solar Water Heating Systems. [USQ Project]

Gibbons, Benjamin (2017) Lifecycle costs and maintenance of gross pollutant traps for rural local government areas. [USQ Project]

Evans, Travis (2017) Low-Cost Slip Angle Sensor for Use in Analysing Vehicle Handling Characteristics. [USQ Project]

Redmond, Thomas W. (2017) Management of Compost Amendments to Sustainable Sugarcane Under Marginal Quality Irrigation. [USQ Project]

Cain, Michael (2017) Management of Unsealed Roads within the Narrabri Shire Council Local Government Area. [USQ Project]

Alcorn, Matthew (2017) Mapping and Spatial Analysis of Land Cover Dynamics of Threatened Grassland Ecosystems in the Condamine River Catchment. [USQ Project]

Kong, Weibin (2017) Measuring tree DBH & height by using terrestrial laser scanner for forest management. [USQ Project]

Alfadhly, Saad (2017) Mechanical and tribological performance of epoxy composites based on waste ceramic powder. [USQ Project]

Trangmar, Alex (2017) Mechanical Battery Designed for Domestic Solar Power Storage. [USQ Project]

Alkandari, Hamed (2017) Mechanical behaviours of grout for strata reinforcement. [USQ Project]

Saleh, Ali (2017) Medication Robot (Path Finding). [USQ Project]

Seymour, Jeremy (2017) Mine Subsidence Survey by UAV and Photogrammetry. [USQ Project]

Campbell, Alexander (2017) Modelling alternate approaches for calculating friction head loss in water distribution pipelines. [USQ Project]

Carrie, Logan (2017) Modelling of a Portable Air Conditioner. [USQ Project]

Kingston, Mitchell (2017) Monitoring the Progress of Mine Site Vegetation Rehabilitation Using Satellite Imagery. [USQ Project]

Godwin, Joshua (2017) Multi-Stations, Trimble SX10 laser scanning applications, capabilities and relevant accuracies. [USQ Project]

Nichol, Matthew (2017) NSW Control Network: User Errors vs Network Errors Using CORSNet New South Wales. [USQ Project]

Crossen, Megan (2017) On-Farm Management Practices on Nutrient Pollution Control and an Impact Assessment on Water Quality. [USQ Project]

Richardson, Simon (2017) Optimal Erosion Weir Design Selection. [USQ Project]

Madzongo, Brighton (2017) Optimisation of Wear Resistance of Non-metallic Wear Parts in Pumping Components. [USQ Project]

Haniotis, Tyson (2017) Performance of High Strength Crumb Rubberised Concrete. [USQ Project]

McLeod, Julia (2017) Performance of water sensitive urban design bioretention installations on the Gold Coast. [USQ Project]

Arnold, Trent (2017) Performance Rating of Residential Builders. [USQ Project]

Pearce, Gary (2017) Physio-Exercise-Bike Adaptation for use by person with restricted knee-bending range. [USQ Project]

Alqallaf, Khalil S. E. KH. E. S. M. (2017) Power Quality Analysis of USQ Ipswich. [USQ Project]

Almutairi, Torki A. M. A. R. Z. (2017) Properties of Cement and Geopolymer Mortars Reinforced with Glass Fibres. [USQ Project]

Mchugh, Brendan (2017) Quantisation of Coal Slot Bunker Contents. [USQ Project]

Muhldorff, Joshua (2017) Real-Time Strategy Game Control for Mobile Robots. [USQ Project]

Kidd, Andrew (2017) Redesign of Brisbane City Council's Type 3 Asphalt and Development of Mix Specific Flexural Master Curves. [USQ Project]

Borzou, Rahmin (2017) Rehabilitation of Timber Bridge Piles with Splitting Failure Mechanism. [USQ Project]

Martin, Jackson John Raymond (2017) Reliability of Internal Co-ordinate Quality Indicator Values for Trimble RTK GNSS measurements. [USQ Project]

May, Andrew William (2017) Renewable energy generation potential of stormwater detention basins. [USQ Project]

Adams, Joshua Lindsay (2017) Renewable energy site selection tool. [USQ Project]

Adams, Joshua Lindsay (2017) Renewable Energy Site Selection Tool. [USQ Project]

Kinney, David (2017) Renewable Energy: InfraRed Monitoring of Dust Impact on Solar Panel Efficiency. [USQ Project]

Pollock, Denver (2017) Residual Chlorine Improvement in Woodhill Water Supply Zone. [USQ Project]

Hackett, Thomas (2017) Review of STATCOM technology and their applications in power networks. [USQ Project]

Walsh, Alec (2017) Road Ice Skid Resistance Treatments on Upper Natone Road, Tasmania. [USQ Project]

Martin, James (2017) Road network improvement and maintenance strategy for the Port of Burnie. [USQ Project]

Paige, Callan (2017) Roadwork signage analysis and general road user driving behaviour through construction sites. [USQ Project]

Davy, Brendan (2017) Scramjet Engine Fluidic Thrust Balancing to Achieve Side Loading. [USQ Project]

Morrant, Rodney (2017) Solar thermoelectric power generation in a vacuum and with water cooling. [USQ Project]

Richards, Gregory Ian (2017) Spinning Reserve and Renewable Energy Penetration: How much spinning reserve does South Australia need? [USQ Project]

Vandersee, Kingsley (2017) Stability of Self-Propelled Sprayer Booms. [USQ Project]

Gresham, David Raymond (2017) Static and Dynamic Seal Friction in High Performance Hydraulic Systems. [USQ Project]

Ryan, Meredith (2017) Stormwater Management Solutions for Flat Terrain. [USQ Project]

Daly, Mark Thomas (2017) Sustainability of Microgrids for Island Communities: Rural Electrification Strategies for Fraser Island. [USQ Project]

Delaforce, Jack T. (2017) Test harness development to analyse the performance of an algorithmic based High Voltage Fault Detection, Isolation and Restoration application. [USQ Project]

Alrashidi, Meshari (2017) The adhesive wear behaviour of UHMWPE for knee replacement applications. [USQ Project]

Hancock, Jarred (2017) The Development of Building a Cadet Training Manual. [USQ Project]

Albuloushi, Ali (2017) The Effect of Engine Compression Ratios on Diesel Engine Performance and Emission Fueled with Waste Cooking Biodiesel. [USQ Project]

Quihampton, William (2017) The effect of flight height, image overlap and the number of GCPs used on the accuracy of an aerial photogrammetry survey over a road surface, with an assessment of the suitability of aerial photogrammetry for road conformance testing. [USQ Project]

Wellings, Mansell (2017) The effect of high powered ultrasonic treatment on an Australian anaerobic digester. [USQ Project]

Almeshkhas, Abdullah (2017) The Factors that Affect the Labour Productivity in Construction in Kuwait in the Residential Sector. [USQ Project]

Almeshkhas, Abdullah (2017) The Factors that Affect the Labour Productivity in Construction in Kuwait in the Residential Sector. [USQ Project]

Aloraifan, Saud (2017) The influence of Nano-Graphite as lubricant additive on lubricity of canola oil and tribological behaviour of mild steel. [USQ Project]

Alanezi, Dhari S. Gh. H. H. (2017) The influence of NaOH and fibre length on the load transfer in sugarcane bagasse fibre/ polymer composites. [USQ Project]

Alshammari, Fahad Z. KH. KH. M. (2017) The influence of the fibre orientation on material removal of fibre reinforced polymeric composites due to shear force under sliding operating conditions. [USQ Project]

Drake, Michael (2017) The Introduction of a Rural Enhanced Auxiliary Left-turn (EAUL) Treatment at Geometrically Constrained Locations in NSW. [USQ Project]

Flynn, Julian (2017) The use of Nearmap Imagery in Two Dimensional Topographic Surveying Applications. [USQ Project]

Clark, Renai (2017) To seal or not to seal in Kingborough? [USQ Project]

Almutairi, Mohammed (2017) Two strokes engine performance using waste cooking oil. [USQ Project]

Abernethy, Toby (2017) Understanding the relationship between Quality and Cost (and to a lesser extent Time) in construction projects, with the aim of preventing the occurrence of Quality problems. [USQ Project]

Munro, Benton (2017) Uniformity and Energy Use of Australian Lateral Move Irrigation Machines. [USQ Project]

Robb, William (2017) Use of Shape Memory Polymers (SMP) in an Engineering Application. [USQ Project]

Biviano, Jordan James (2017) Using Stereo Images from an Imaging Total Station to Autonomously Produce 3D Real World Coordinates. [USQ Project]

Saunders, Danielle (2017) Wide area protection using synchrophasors. [USQ Project]

2016

Pettersson, Declan (2016) 3D hydrologic features mapping with imaging rover. [USQ Project]

Redding, Bradley (2016) 3D modelling for surveying projects using unmanned arial vehicles (UAVs) and laser scanning. [USQ Project]

Davis, Aaron (2016) A civil engineering feasibility study on a sustainable pumped hydroelectricity plant at Wivenhoe. [USQ Project]

Keightley, Anthony J (2016) A numerical investigation into sinkhole formation. [USQ Project]

Dhakal, Bibek (2016) A trade-based approach for defects management in residential construction. [USQ Project]

Lowry, Mark (2016) A validation of the model for effluent disposal using land irrigation (MEDLI). [USQ Project]

Rendle-Short, Kendric (2016) Alternator interrupting circuit for improving fuel economy. [USQ Project]

Noon, Jarred (2016) An assessment of the deceleration on horizontal curve component of the Austroads operating speed estimation model. [USQ Project]

Boylan, Richard (2016) An evaluation of the performance of two different global satellite navigation systems, Trimble’s CenterPoint RTX and a conventional network RTK system. [USQ Project]

Archbold, Scott (2016) An investigation into the accuracies and limitations of different methods of connecting to datum. [USQ Project]

King, Matthew (2016) An investigation into the potential benefit/value of Ipswich CBD residential revitalisation. [USQ Project]

Mccullagh, Harry James (2016) An investigation of the predictive accuracy of salinity forecast using the source IMS for the Murray-Darling river. [USQ Project]

Sedgman, Kristan (2016) Analysis of circular section blade profiles in a simple peripheral drag VAWT: design investigations and performance modelling. [USQ Project]

Stainwall, Haren (2016) Analysis of culverts during extreme flood events. [USQ Project]

Richardson, Megan (2016) Analysis of road crashes at roundabouts in Toowoomba. [USQ Project]

Milton, Ross (2016) Analysis of road safety trends at signalised intersections in Toowoomba. [USQ Project]

Rusconi, Luke (2016) Analysis of steady state vs dynamic modelling of groundwater mounding in development areas in WA. [USQ Project]

Patel, Jayesh (2016) Analysis of the potential for 100% renewable energy supply to Groote Eylandt. [USQ Project]

Carson, Bradley (2016) Analysis of wall formwork in the Australian multi-storey construction industry. [USQ Project]

Baker, Trent (2016) Analysis on the behaviour of FRP reinforced concrete railway sleepers. [USQ Project]

Robertson, Thomas (2016) Application of MODIS and Google earth data to assess the health of the Mitchell grasslands through web based GIS. [USQ Project]

Beccarelli, Ryan (2016) Arduino modbus simulator. [USQ Project]

Zador, Tari (2016) Assessing spatial mismatch patterns in the Gold Coast. [USQ Project]

Watson, Liam Douglas (2016) Asset condition monitoring of Gympie regional council’s road network. [USQ Project]

Byles, K. (2016) Automated shark detection using computer vision. [USQ Project]

Hoang, Hung (2016) Automatic Circuit Recloser (ACR) communications using P25 RMU (Radio Modem Unit). [USQ Project]

Smith, C. Morgan (2016) Battery SMART charge controller/combined co-gen grid connected inverter design and simulation. [USQ Project]

Wiya, Robert (2016) Behavior of concrete when using RAP (Reclaimed Asphalt Pavement) as a coarse aggregate material. [USQ Project]

King, Job (2016) Behaviour of concrete with oil contamination and reinforced with fibres. [USQ Project]

Guy, Ross (2016) Best practice management of industrial process control alarm floods. [USQ Project]

Wentworth, B. (2016) Circuit breaker simulated operation & behaviour under faulted power system conditions. [USQ Project]

Broome, Lachlan (2016) Comparison between terrestrial close range photogrammetry and terrestrial laser scanning. [USQ Project]

Saika, K. (2016) Design analysis of the bearing component of the hip joint prosthesis to improve distribution of forces and frictional wear. [USQ Project]

Stephenson, Ryan (2016) Design and implementation of web-based keystroke analytics for user verification. [USQ Project]

Border, Fraser (2016) Design methodology evaluation: an investigation into the 'right' data for situational awareness of RTS-based tele-robotic systems in limited network environments. [USQ Project]

Fell, Bradley (2016) Design of a portable bushfire attenuation fence. [USQ Project]

Sutcliffe, Wayne (2016) Design of a truss bridge for low cost using structural topology optimisation. [USQ Project]

Martin, Gabriel (2016) Design of an optical access engine and pneumatic head clamp. [USQ Project]

Lister, James (2016) Design of high modulus asphalt overlay for concrete pavements. [USQ Project]

Wilson, Matthew (2016) Deterioration of timber bridges using a Fault Tree Analysis. [USQ Project]

Nankervis, Gary A. (2016) Development of a computer simulation for scouring around bridge piers. [USQ Project]

Jackson, Scott (2016) Development of a sustainable footpath material using recycled road profile, natural soils and PolyCom stabilising aid. [USQ Project]

Priest, Andrew James (2016) Development of stormwater asset management plan for local council. [USQ Project]

Lazzarini, Sarah-Jane (2016) Development stages of a road management strategy suitable to the Burdekin shire. [USQ Project]

Dobson, Lindsay (2016) Dumper derailment investigation and development of custom check rail. [USQ Project]

Hourigan, Karen (2016) Effect of distributed photovoltaic embedded generation on the electricity distribution network. [USQ Project]

McDonnell, James (2016) Effect of time interval variations on network RTK in a high multipath environment. [USQ Project]

Cuckson, Christopher (2016) Effectiveness of the Wide Centreline Treatment on two-way rural roads. [USQ Project]

Cuell, Jonathan (2016) Effects of on-site detention systems on urban drainage catchments. [USQ Project]

Adcock, Glen (2016) Electro-thermal modelling of large PV array degradation for thermography and peak power conditioning monitoring. [USQ Project]

Gauld, Jason Andrew (2016) Energy & carbon audit of the Scenic Rim Regional Council. [USQ Project]

James, Jake (2016) Evaluation of the use of safety barriers on roundabouts. [USQ Project]

Miller, James (2016) Examining the Hansen Global Forest Change (2000 - 2014) dataset within an Australian local government area. [USQ Project]

Jarvinen, Jarkko (2016) Extraction of ECGs for twin pregnancies. [USQ Project]

Farahbakhsh, Iman (2016) Finite element modelling of a sustainable hybrid natural fibre sandwich panel under bending. [USQ Project]

McLinden, Joshua (2016) Functional design report: Corry’s road sewerage augmentation. [USQ Project]

Freeman, Belinda (2016) Future public transport options for Toowoomba for the next twenty years. [USQ Project]

Peng, Zhuohao (2016) Geodesic dome structural analysis and design. [USQ Project]

Shephard, Steven (2016) Home based solar power generation, storage and localised grids. [USQ Project]

Notley, Lindsay (2016) Identification of cement manufacturing raw materials using machine vision. [USQ Project]

Collins, Matthew (2016) Identification of the spectral signature of noxious weed St. John’s wort and development of a tracking methodology via remote sensing. [USQ Project]

Smith, Benjamin James (2016) Identifying best practice pavement design for an unsealed road network to achieve sustainability improvements. [USQ Project]

Taylor, Scott (2016) Implementation of negative phase sequence protection in the high voltage distribution network. [USQ Project]

Mason, Alex (2016) Improved transfer chute design using DEM software to predict material flow behaviour. [USQ Project]

Reeson, Andrew (2016) Improvement of production of double disc planters. [USQ Project]

De Leon, Adrian (2016) Improving caravan design by modelling of crosswind. [USQ Project]

Mear, Benjamin (2016) Improving design standards for passing lanes on rural highways in Queensland. [USQ Project]

Molloy, Aron (2016) Improving project delivery: through the application of project management techniques. [USQ Project]

Williams, Alexander (2016) Improving Queensland speed zoning practices. [USQ Project]

Richardson, Joseph (2016) Improving the transition of a successful tender from estimating to project management phases. [USQ Project]

Tippett-Whiteman, Austin (2016) Integrating scheduling with quality to minimise defects in construction. [USQ Project]

Walker, Sam (2016) Integration effectiveness between engineering teams on complex defence programs. [USQ Project]

Thompson, Zaine (2016) Integration of Trimble V10 imaging rover with R10 GNSS receiver for data collection under dense tree canopies. [USQ Project]

Rosnell, Alexander (2016) Investigating design and construction issues for precast concrete bridge over Bookookoorara creek. [USQ Project]

Heath, Brendon (2016) Investigation into the flexural characteristics of cold formed steel filled with rubberised concrete. [USQ Project]

Lynch, Joshua David (2016) Investigation of dam wall deformation surveys. [USQ Project]

Rosendale, Shaun (2016) Investigation of low voltage regulation opportunities on the distribution network. [USQ Project]

Cherry, Rebecca (2016) Investigation of road wearing surface systems for glue laminated softwood timber bridge decks. [USQ Project]

Chou Pei-Chen, Peggy (2016) Investigation of scour mitigation methods for critical road structures. [USQ Project]

Fergusson, Paul (2016) Light Fidelity (Li-Fi) prototype with Raspberry Pi. [USQ Project]

Ryan, M. J. (2016) Low cost passive radar through software defined radio. [USQ Project]

Bailey, Donald (2016) Mansell power lifter actuator failure analysis. [USQ Project]

Dethan, Jacob Febryadi Nithanel (2016) Mathematical modelling of the nickel iron battery. [USQ Project]

Laurent, Anthony (2016) Modelling and analysis of multi-junction photovoltaic cells using MATLAB/Simulink for the improvement of conversion efficiency. [USQ Project]

Taylor, David (2016) Modelling supply channel seepage and analysing the effectiveness mitigation options. [USQ Project]

Verrall, Daniel Graham (2016) Modelling water allocation increases using climate predictions. [USQ Project]

Gall, Michael (2016) Non-invasive methods for testing the integrity of bulkheads and/or deckheads during a fire. [USQ Project]

Close, Andrew James (2016) Operational characteristics of surge arresters within high voltage substations. [USQ Project]

Lund, Nicholas (2016) Optimisation of long line GNSS networks using Geoscience Australia’s AUSPOS service and static baselines. [USQ Project]

Dortmans, Justin (2016) Overcoming asymmetrical communication delays in line current differential protection circuits. [USQ Project]

Beaumont, Matthew (2016) Pacific highway glenugie: case study of the use of heavy duty granular pavement in northern NSW. [USQ Project]

Nicholson, Phillip (2016) Power quality improvement using a STATCOM inverter. [USQ Project]

Beutel, Kurt Gavin (2016) Power utility remote device communications using a Low Power Wide Area Network (LPWAN) based on the LoRa communications standard. [USQ Project]

Stephens, John (2016) Projectile mass distribution following impacts on hardened steel plate. [USQ Project]

Hathaway, Samuel B. (2016) Real world 3D accuracy achievable of Australian standard 5488-2013 classification of subsurface utility information using electromagnetic field detection. [USQ Project]

Mepham, Matthew (2016) Recent trends of stabilisation methods: a case study for rural roads by councils in the New England region of NSW. [USQ Project]

Hafey, Matthew (2016) Reduction of fertiliser losses in agriculture. [USQ Project]

Wicks, Jorja (2016) Remote access intravenous pump emulator training system. [USQ Project]

Gleeson, Jarrad (2016) Remotely operated telepresent robotics. [USQ Project]

Russell, Stephen (2016) Review of shared zones as a solution to grade and space restrictive residential streets. [USQ Project]

Cohen, Jethro (2016) Review of timber bridge maintenance practices on Queensland state controlled road networks. [USQ Project]

Adams, Justin Mitchell (2016) Risk management in the construction of communication towers. [USQ Project]

Monz, Bernard (2016) Robot Cat – a free-fall analyses. [USQ Project]

Stephens, Benjamin (2016) Sensor to improve detection of line break or earth faults for Victorian answer lines. [USQ Project]

Steel, James (2016) Signal processing techniques for machine condition monitoring. [USQ Project]

Kohler, Jarred (2016) Soil stabilisation in road pavements. [USQ Project]

Evans, Michael (2016) Species distribution modelling of the Glossy Black Cockatoo in Queensland’s Condamine region. [USQ Project]

Bell, Alexander (2016) Stability analysis of shallow undrained tunnel heading using finite element limit analysis. [USQ Project]

Fraser, Andrew (2016) Study of blast effects on structures. [USQ Project]

Shrestha, Suman (2016) Study of effects of coarse grain contents on Atterberg limits and expansiveness of the clay. [USQ Project]

Petersen, David (2016) Studying the effects of non-uniform stress distributions on soil heave. [USQ Project]

Price, Timothy (2016) Synchronization of multiple DVB-T USB receivers for use in common radio astronomy applications. [USQ Project]

Jelacic, Antonio (2016) Terrestrial laser scanner for 3D modelling of USQ Toowoomba campus. [USQ Project]

Anderson, Elizabeth (2016) The application of visualisation techniques for stratum and strata boundaries within the New South Wales digital cadastre. [USQ Project]

James, Jeffrey (2016) The effect of materials and conditions on reflectorless electronic distance measurements from a Total station. [USQ Project]

Poulton, Ashley (2016) The effect of resurfacing on the lateral resistance of narrow gauge low profile concrete sleepers. [USQ Project]

Roberts, David (2016) The effects of control point shape and distribution in the creation of a numeric cadastral data base. [USQ Project]

Pease, Adam (2016) The impacts construction traffic has on pavements within residential subdivisions. [USQ Project]

Woolley, Reece (2016) The performance evaluation of bridge culverts reinforced with GFRP bars. [USQ Project]

Alajmi, Abdalrahman R. E. S. (2016) Theoretical study of the effect of fibre orientations and porosity on heat conductivity of reinforced polymer composites. [USQ Project]

McFadden, Patrick (2016) Tidal predictions in ungauged estuaries for boat-ramp access windows. [USQ Project]

Armstrong, Brent (2016) Towards 2020: an energy-neutral council works depot. [USQ Project]

Skehan, Ned (2016) Towards two-dimensional infiltration measurement in complex and variable soil environments. [USQ Project]

West, David (2016) Tracking machinery to investigate the effect of compaction during sugar cane harvesting. [USQ Project]

Breinl, Anton (2016) UAVs in pipeline design and rehabilitation of construction corridors. [USQ Project]

Costello, Brad (2016) Underground check survey. [USQ Project]

Brennan, Matthew Aaron (2016) Use of recycled concrete and lime to improve marginal subgrades in the Toowoomba Regional Council. [USQ Project]

Hawkins, Jared (2016) Using engineering cementitious composites as an adhesive for near-surface mounted FRP bars strengthening concrete/masonry structures. [USQ Project]

Akbari, Seyedmojtaba (2016) Using Internet of Things for vehicle’s emission monitoring. [USQ Project]

Thorley, Mark (2016) Using renewable DC energy sources: improving domestic energy efficiency. [USQ Project]

Mosetter, Steven (2016) Using UAVs and machine vision in the early detection of combine harvester fires. [USQ Project]

Smith, Cameron (2016) Utilisation of rice husk ash and fly ash as a partial replacement for cement in self-consolidating concrete. [USQ Project]

McCarthy, William (2016) Validation of commercial precision spraying technology. [USQ Project]

Starkey, Dean (2016) Vibroacoustic transformer condition monitoring. [USQ Project]

Birkett, Russell Johnsen (2016) Video processing road safety system. [USQ Project]

Gann, Nicholas (2016) Visualisation of a 3D cadastre using terrestrial laser scanning. [USQ Project]

Smith, Sathya (2016) Wearable technology and gesture recognition for live performance augmentation. [USQ Project]

Alenezi, Fahad T. A. S. M. (2016) Workability and compressive strength of eco-friendly concrete based on waste ceramic particles. [USQ Project]

2015

Hooson, Mitchell D (2015) A comparison of the limitations and accuracy of both obstructed prism and obstructed non-prism measurements. [USQ Project]

Nash, Lachlan (2015) A review of warrants for traffic barriers in divided carriageway medians. [USQ Project]

Strack, Anita Leigh (2015) A review on Australian mine haul road design procedures. [USQ Project]

Robinson, Adam (2015) A study into the behaviour of FRP bolted connections. [USQ Project]

Carlin, Steven (2015) An analysis of kinetic energy recovery systems and their potential for contemporary internal combustion engine powered vehicles. [USQ Project]

Fitzgerald, Samuel Jesse (2015) An assessment of rural road network resilience as a critical infrastructure for coal seam gas development in regional Queensland. [USQ Project]

Paul, Gregory (2015) An evaluation of traffic calming devices for major highways passing through rural Australian communities. [USQ Project]

Hancock, Robert John (2015) An investigation into LandXML for implementation of 3D Cadastre in eSurvey. [USQ Project]

Accendere, Robert Peter (2015) An Investigation into the testing and commissioning requirements of IEC 61850 Station Bus Substations. [USQ Project]

Purvis, Alan (2015) An investigative study of road construction contract variations. [USQ Project]

Porter, Simon (2015) Analysing geotechnical aspects of concrete pipe culverts. [USQ Project]

Pathiranage, Thilini (2015) Analysis of bridge failure due to Cyclone Marcia in Central Queensland using fault tree method. [USQ Project]

Jordan, Bradley (2015) Analysis of bridges subjected to flood loadings based on different design standards. [USQ Project]

Walker, Scott (2015) Analysis of the behaviour of composite transom decks for railway bridges. [USQ Project]

Trent, Stephen Wade (2015) Assessment of habitat factors and development of a species distribution model for the long nosed potoroo (Potorous tridactylus tridactylus) in SEQ. [USQ Project]

Butler, Michael (2015) Asset management framework for NSW local government. [USQ Project]

Richardson, Mark (2015) Automatic splint to prevent self-harm in autistic and brain injured people. [USQ Project]

Kaliyev, Vladislav (2015) Axial Flux Permanent Magnet coreless machine. [USQ Project]

Patterson, Melanie (2015) Building Information Modelling: an explorative study. [USQ Project]

Robertson, Matthew (2015) Circular geopolymer concrete columns with composite rebars. [USQ Project]

Cormick, Adam (2015) Comparing different heating methods for determination of moisture content in soils. [USQ Project]

Kirby, Christopher (2015) Comparison of PV maximum power point. [USQ Project]

Little, Richard A (2015) Condition monitoring of rotating machinery - vibration analysis. [USQ Project]

Alsinan, Abdulaziz (2015) Conductivity of wall materials based on natural fiber. [USQ Project]

Quinton, Matthew (2015) Controller Area Network to Modbus network bridge to interface gas detection units with Building Management Systems. [USQ Project]

Linnan, Nicholas (2015) Creating a performance management system for contractors to assess subcontractors. [USQ Project]

Murdoch, Robert (2015) Creating a simplified model of the Alkali-Silica Reaction in concrete by utilising finite element modelling techniques. [USQ Project]

Spurry, Nicholas (2015) Critical analysis of RCM in an Australian ANSP context. [USQ Project]

Kilpatrick, Glen R (2015) DEM generation and hydrologic modelling using LiDAR data. [USQ Project]

Jiang, Jennifer (2015) Demand Management Storage Project (DMSP) – an application of grid scale battery energy storage systems. [USQ Project]

Burtenshaw, Ryan (2015) Developing an activity-based user interface for remote experimentation for science education in schools. [USQ Project]

Olsen, Campbell (2015) Development and execution of asset criticality framework: a study of water and wastewater infrastructure at Toowoomba Regional Council. [USQ Project]

Coppock, James (2015) Development of a Raspberry Pi based, SDI-12 sensor environmental data logger. [USQ Project]

Triaca, Bryan F (2015) Disposable stormwater sampling device for water quality hazard detection. [USQ Project]

Tunnah, Patrick (2015) Diversion of stormwater first flush: an alternative method of managing pollution to urban waterways. [USQ Project]

Murphy, Ryan (2015) Dynamic conductor ratings: annealing properties of homogenous conductors across varying climatic conditions. [USQ Project]

Kerr, James (2015) Dynamic response testing method of damage detection in fibre composite structures. [USQ Project]

Ford, Joseph (2015) Effect of environmental surroundings on accuracy and precision of total station measurements. [USQ Project]

Bein, Vincent (2015) Effect of time interval variations on RTK derived distances. [USQ Project]

Timms, Ashlii (2015) Effects of elevated temperature and simulated environmental conditions on the properties of epoxy based polymer resin. [USQ Project]

Lang, Jason (2015) Energy efficiency improvement in coal fired power plant through operational optimisation. [USQ Project]

Santarossa, Matthew (2015) Energy Management & Automated Analytics. [USQ Project]

Wilson, Aaron P (2015) Establishing a mix design procedure for Geopolymer concrete. [USQ Project]

Ismail, Wafeek (2015) Evaluating the differences and accuracies between GNSS applications using PPP. [USQ Project]

Davey, Wade (2015) Evaluating the effectiveness of Intelligent Transport Systems at reducing speeds through roadwork sites in Australia. [USQ Project]

Tobler, Jake P (2015) Evaluation of EverFE software for designing Australian concrete pavements. [USQ Project]

Evans, Jesse Troy (2015) Evaluation of photogrammetric measurements obtained using imaging rovers and imaging theodoli. [USQ Project]

Farrugia, Daniel (2015) Evaluation of signalised intersections in NSW with right turn filters. [USQ Project]

Asghar, Muhammad Athar Aqeel (2015) Evaluation of strength characteristics of recycled bituminous pavement materials. [USQ Project]

Maskall, Jonathon (2015) Exploration of evaporation mitigation measurement techniques. [USQ Project]

Sadanala, Swapan (2015) Failure analysis of total hip replacement and the feasibility of fibre composites as an alternative material. [USQ Project]

Anderson, Oliver Josh (2015) Feasibility assessment of low cost stereo computer vision in clay target shooting coaching. [USQ Project]

Pearson, Kelly (2015) Feasibility of improved traffic flow on Cohoe Street, Toowoomba by intersection improvements. [USQ Project]

Collier, Shane Michael (2015) Finite element analysis of a hybrid natural fibre sandwich wall panel loaded with in-plane shear. [USQ Project]

Mohammed, Rafiqul Islam (2015) Finite element analysis of fillet welded joint. [USQ Project]

Costantini, Daniel (2015) Green IT - dynamic network topologies. [USQ Project]

Raleigh, Andrew (2015) How to mitigate the effects of scour on bridge piers through the use of combined countermeasures. [USQ Project]

Snelgar, Daniel (2015) Implementing Industry Best Practice Alarm Management. [USQ Project]

Wall, Rhyan (2015) Improved cooling system for USQ's small scale icing wind tunnel. [USQ Project]

Pescod, Rhys (2015) Improvements to the calibration of Electronic Distance Measurement Equipment (EDME). [USQ Project]

Lumsden, Glenn (2015) Industrial wireless network mapping. [USQ Project]

Vever, Thierry-Jacques Patrick (2015) Insulated container testing & rating system development. [USQ Project]

Agoritsas, Stavroula (2015) Investigating the accuracy of terrestrial laser scanning within a rail environment. [USQ Project]

Pike, Samuel (2015) Investigation into the delamination of composite laminates on aircraft rudders due to fluid ingress and icing. [USQ Project]

Graham, Sharon (2015) Investigation into the economic feasibility of grid-tied photovoltaic panel and storage systems. [USQ Project]

Fairley, Melissa (2015) Investigation of seepage in water supply distribution channels in St George, Queensland. [USQ Project]

Epselis, Jonathan (2015) Investigation of the relationship between speed and separation width for head-on crashes in New South Wales. [USQ Project]

Eaton, John (2015) Investigations into the effect of contaminants on permeable concrete effectiveness during its life cycle. [USQ Project]

Timings, Philip (2015) Isolated grid solar-battery support for SWER. [USQ Project]

Couch, Greg (2015) Key infrastructure review (Newcastle, NSW) vulnerability to a Tsunami. [USQ Project]

Jessup, Cameron (2015) Launceston’s Combined Sewerage System – investigation and strategy development. [USQ Project]

Field, Shaun (2015) Machine vision and sensing with an Android. [USQ Project]

Roberton, Stirling (2015) Managing field moisture to reduce the soil compaction risk at cotton harvest. [USQ Project]

Cummings, Shane (2015) Modelling the behaviour of floodways subjected to flood loadings. [USQ Project]

McIntyre, Jamie (2015) Monitoring and removal of natural organic matter (NOM) from Toowoomba water sources. [USQ Project]

Fleming, Desmond James (2015) Object-oriented image analysis of cotton cropping areas in the Macintyre Valley using satellite imagery. [USQ Project]

Cook, Garth Anthony (2015) On-site detention methods & the cumulative effect. [USQ Project]

Beutel, Amy (2015) Optimal mix design for epoxy resin polymer concrete. [USQ Project]

Mansell, Chloe (2015) Optimisation of multicore processor and GPU for use in embedded systems. [USQ Project]

Kubler, Kristy A C (2015) Optimisation of off-highway truck fuel consumption through mine haul road design. [USQ Project]

Curran, Samuel James (2015) Optimized scheduling of water distribution network to reduce energy costs. [USQ Project]

Diffin, Luke (2015) Own identification of contributing factors for the success of toll roads in Australia under Public Private Partnerships. [USQ Project]

Hancock, Craig Ross (2015) Own mechanism for solving disputes over retaining walls near property boundaries. [USQ Project]

Lucas, Ryan (2015) Piecewise adaptive controller design for position control of magnetic levitation system. [USQ Project]

Wager, Thomas (2015) Planning support systems for complex infrastructure development. [USQ Project]

Moes, Denika (2015) Power-Law flood frequency analysis of selected Queensland stream gauges. [USQ Project]

Salonen, Marcus (2015) Prediction of timber bridge girder strength and stiffness using stress wave analysis. [USQ Project]

Connell, David John (2015) Production of semi-real time media-GIS contents of natural disasters using MODIS satellite data. [USQ Project]

Labrosse, Alexander (2015) Progress towards sustainable road construction – An investigation into the Roads and Maritime Services of New South Wales and Sustainability Rating Tools. [USQ Project]

Koenig, Nathan (2015) Project Management Maturity in Local Government. [USQ Project]

Seeney, Luke (2015) Project performance measures for civil construction projects associated with different procurement strategies. [USQ Project]

Sparksman, Peter John (2015) Quantifying the time and cost associated with the Request for Information (RFI) OR Technical Query (TQ) process - a designers perspective. [USQ Project]

Cox, Raymond (2015) Real-world comparisons between target-based and targetless point-cloud registration in FARO Scene, Trimble RealWorks and Autodesk Recap. [USQ Project]

McQuade, Samuel R (2015) Recyclable disposable helmet design. [USQ Project]

Browne, Michael Charles (2015) Recycled rubber access cover riser. [USQ Project]

Wilson, Ronald J (2015) Redefining the standard compaction test to better describe the usage of cotton picking machines on Australian vertosols. [USQ Project]

Saxby, Ian Michael (2015) Regulating rescue package descent through controlled autorotation. [USQ Project]

Marsh, Scott (2015) Remote identification of overhead conductor materials. [USQ Project]

Hohenhaus, Paul (2015) Remote management of safety systems in power utility installations. [USQ Project]

Cooper, David (2015) Sensor platform for monitoring conveyor belt rollers. [USQ Project]

Coverdale, Constance (2015) Soil nitrogen supply rates during a cotton season. [USQ Project]

George, Timothy Colin (2015) Soil pore blockage as influenced by livestock effluent with specific focus on colloids. [USQ Project]

Smith, Mitchell (2015) Southeast Queensland storm tide response to ex tropical cyclone Oswald. [USQ Project]

de Freitas Pessoa, Daniel (2015) STATCOM DC bus voltage control and switching strategy analysis. [USQ Project]

Alajmi, Rashed (2015) Study on sisal fibres as insulator in building materials. [USQ Project]

Alajmi, Faisal (2015) Study on tribological performance of mild steel under canola bio-lubricant conditions. [USQ Project]

Smeaton, Curtis (2015) Surveying applications of photogrammetric UAVs - a comparison with conventional survey techniques. [USQ Project]

Price, David (2015) Sustainable road development and management. [USQ Project]

Richardson, Kieran (2015) System design of a hydrogen induction system as a retrofit item compatible with existing internal combustion engines. [USQ Project]

Braden, Ashleigh (2015) The effect of fibres on the properties of concrete with oil contaminated sand. [USQ Project]

Lieschke-Mercer, Yvette (2015) The feasibility of using constructed wetlands systems for urban wastewater. [USQ Project]

Mattsson, Bradley I (2015) The identification of all rights, obligations, and restrictions on freehold land in South Australia. [USQ Project]

Belbin, Heidi (2015) The use of low-cost photogrammetry techniques to create an accurate model of a human skull. [USQ Project]

Flannery, Aiden Michael (2015) Thermally insulated structural sandwich panels for roofing applications. [USQ Project]

West, Jared (2015) Transitioning roadways from high-speed to low-speed environments when approaching regional towns in North Queensland. [USQ Project]

Green, Matthew (2015) Uniformity performance of non-standard overlapped center pivot and lateral move sprinklers. [USQ Project]

Rizzo, Giuseppe Ferdinando (2015) Use of biochar geostructures for urban stormwater water cleanup. [USQ Project]

Bernier, Amy (2015) Use of fibre-optic (FBG) sensors in structural health monitoring – high grade reinforced concrete beams. [USQ Project]

Kelderman, Simon (2015) Using a sprinkler infiltrometer and the GAML model to predict moving sprinkler performance in the field. [USQ Project]

Bellars, Andrew (2015) Vehicle energy usage. [USQ Project]

Fraser, Carl (2015) Vulnerability of bridges in extreme flood events based on element failure. [USQ Project]

Weinheimer, Ina (2015) Wastewater treatment using tidal flow wetlands. [USQ Project]

2014

Knipe, Russell Alexander (2014) 3D fluid modelling of the O.O. Madsen Bridge during flood. [USQ Project]

Hogan, Matthew Julian (2014) A test facility for assessing the performance of IEC61850 substation automation designs. [USQ Project]

Knight, Tracey Anne (2014) Alkali-silica reaction in concrete bridge piles: strengthening with fibre-reinforced polymers. [USQ Project]

Knight, Tracey Anne (2014) Alkali-silica reaction in concrete bridge piles: treatment and strengthening with fibre-reinforced polymers. [USQ Project]

Marland, Michael (2014) Alternatives to SF6 in HV circuit breaker insulation. [USQ Project]

Boully, Jacinda (2014) An analysis of human behaviour which can cause fatalities in the bus and train tunnel during a tunnel fire event. [USQ Project]

O'Callaghan, Adam (2014) An analysis of roadbase materials used in foamed bitumen stabilisation. [USQ Project]

Baxter, Melissa Hope (2014) An energy and carbon audit of Mornington Peninsula Shire Council. [USQ Project]

Goold, Bradley (2014) An innovative intelligent system for child care & safety applications using ZigBee Wireless Sensing Networks. [USQ Project]

Dudman, Benjamin (2014) Aquaplaning assessment and mitigation in flat terrains. [USQ Project]

Sheridan, Liam (2014) Aquaplaning: an investigation of surface flow calculation. [USQ Project]

Dugdale, Paul Nicholas (2014) Arc flash protection of a low voltage motor control centre. [USQ Project]

Liddell, Benjamin Steven (2014) Assessing the true cost of design variations – a designer’s perspective. [USQ Project]

Nicol, Lachlan Keith (2014) Behaviour of fibre composite walkways and grating. [USQ Project]

Anumula, Sreekanth (2014) Communications for smart grid substation monitoring using WIMAX protocol. [USQ Project]

Single, John H. (2014) Cost effective pavement reconstruction or rehabilitation profile(s) in Townsville. [USQ Project]

Atkinson, Jack Allan (2014) Dam deformation surveys with modern technology. [USQ Project]

Kennedy, Isaac (2014) Design and development of a fibre-optic microphone. [USQ Project]

Napier, Luke W. P. (2014) Develop process bus architecture for integrating sampled value IEDs. [USQ Project]

Brits, Chane (2014) Developing a numerical model for the design of sheet pile walls. [USQ Project]

McKenzie, Seren (2014) Development of a road safety plan for Scenic Rim Regional Council. [USQ Project]

Pichlis, Matt V. (2014) Development of advanced turbulent combustion models. [USQ Project]

Hesse, Gareth Grant (2014) Development of ductile and ultra-high performance engineered cementitious composite (ECC) with lightweight microsphere additive. [USQ Project]

Atkinson, Andrew Peter (2014) Effect of variations in load profile on power transformer cyclic ratings. [USQ Project]

Sanders, Thomas (2014) Effective road pavement rehabilitation design for local government roads within the Sunshine Coast region. [USQ Project]

Wright, Christopher John Brockway (2014) Evaluation of issues for small and medium-sized enterprises in the use of advanced and green engineering materials. [USQ Project]

O'Sullivan, Daniel (2014) Evaluation of precise point positioning services. [USQ Project]

Rosas, Angela Beatriz Rodriques (2014) Experimental investigation on the alkali silica reaction effect on concrete strength degradation. [USQ Project]

Sambamo, Richard (2014) FEA analysis of tractor axle modification. [USQ Project]

Surendar, Swetha (2014) Flexural behaviour of sandwich panels under elevated temperature. [USQ Project]

Alqahtani, Rafi Ali (2014) Flexural properties of sisal fibre/epoxy Composites. [USQ Project]

Wilton, Joshua (2014) Foam bitumen stabilisation in north west NSW. [USQ Project]

Altamar, Rashed (2014) Fracture behaviour of fibre/polymer composites based on synthetic and natural fibres. [USQ Project]

Guse, Hayden Alexander (2014) Great artesian basin (GAB) water cooling systems for municipal supplies. [USQ Project]

Makireddi, Surya (2014) Groundwater recharge prediction for broad scale irrigation modelling: a case study in the M.I.A-main canal irrigated areas. [USQ Project]

Makireddi, Surya (2014) Groundwater recharge prediction for broadscale irrigation modelling: a case study in MIA-Main Canal irrigated areas. [USQ Project]

Newman, Matthew (2014) High speed rail in Australia: a case study for a Sydney- Wollongong link. [USQ Project]

Senokonoko, Kemueli Bainivalu (2014) Hydraulic modelling of the water distribution system of Tavua-Vatukoula, Fiji. [USQ Project]

Moorhouse, David (2014) Hyper-spectral imaging for airborne meteorite detection. [USQ Project]

Fowler, Michael John (2014) Hypersonic rocket manoeuvre in the TUSQ facility. [USQ Project]

Sunzu, Tony Bonaventure (2014) Improving electricity network utilisation with distributed energy storage systems. [USQ Project]

Vadalma, Anthony (2014) Infant transport incubator cold performance. [USQ Project]

Wady, Ivan (2014) Inflow/infiltration strategic management project. [USQ Project]

Nguyen, Liem (2014) Investigation in failure analysis and materials selection in total hip replacement prosthesis. [USQ Project]

Blyth, Mitchell (2014) Investigation into sub five minute time of concentration in urban drainage design. [USQ Project]

Camilleri, Heath A. (2014) Investigation of energy storage media to improve network voltage regulation. [USQ Project]

Stanton, Vernon (2014) Investigation of the effect of positive and negative crossfalls on road safety at roundabouts. [USQ Project]

Norman, Grant (2014) Investigations into Cambooya’s water supply pressure with respect to local contributing bores. [USQ Project]

Kruger, Rick William (2014) Kinetic energy recovery in motor vehicles using compressed gas. [USQ Project]

Coburn, Adam John (2014) Laser scanning for forest structure analysis. [USQ Project]

Coburn, Adam John (2014) Laser scanning for forest structure analysis. [USQ Project]

Clayton, Scott (2014) Lateral earth pressure problems involved with cantilever retaining structures and stability of those structures. [USQ Project]

Topp, Michael James (2014) LiDAR data for DEM generation and flood plain mapping. [USQ Project]

Windebank, Mark (2014) Locomotive cooling system strategy optimisation. [USQ Project]

Bradford, Thomas J. (2014) Low-cost eye tracker. [USQ Project]

Stern, Nathan (2014) Machine vision detection of crop diseases. [USQ Project]

Keys, Callum Kirby (2014) Mansell power lifter control circuitry redesign. [USQ Project]

Grigg, Andrew (2014) Mapping changes in landscape-scale patterns of vegetation in coal seam gas development areas. [USQ Project]

Watson, George Kenneth (2014) Measurement of waste in concrete construction using lean construction methodologies. [USQ Project]

Wooldridge, Damien Christopher (2014) Methods of feeding out white cottonseed to livestock. [USQ Project]

Robe, Matthew (2014) MiniROV. [USQ Project]

Hatch, Daniel Roy (2014) Modal testing of existing supermarket floor systems and predictive finite element modelling for better design. [USQ Project]

Groves, Lachlan (2014) Monitoring of remote stock watering points by still images using UHF. [USQ Project]

Hancock, Nashua Thomas (2014) Natural disaster risk management in South Asia a dissertation. [USQ Project]

Watson, P. (2014) Non-contact visual soil moisture content estimation. [USQ Project]

Seccombe, Kieran Robert (2014) Numerical modelling of mining subsidence. [USQ Project]

Williams, Wesley James (2014) Numerical simulations of water surfaces for improved evaporation prediction. [USQ Project]

Dray, Kevin (2014) Optical access engine development. [USQ Project]

John, Benjamin Allan (2014) Optimisation of an electric powered air-gliding skateboard. [USQ Project]

Shepherd, Nathan (2014) Optimisation of outside air pre-cooling via underground conductive heat transfer. [USQ Project]

Pratt, Andrew (2014) Prevention of electrical accidents with safe personal protective bonding and earthing. [USQ Project]

Manthey, Byron (2014) Pre–treatment of coal seam gas produced water. [USQ Project]

Darton, Alex (2014) Quantification of the measurement error associated with in situ measurements of water absorption and attenuation using the AC-9 instrument. [USQ Project]

Fuata, James (2014) Quantifying the effects of convective aerodynamic heating over a double swept-wedge configuration at Mach 6. [USQ Project]

Mayne, Caleb (2014) Reliability-centered maintenance analysis of a Rio Tinto iron ore locomotive engine. [USQ Project]

McLaughlin, David (2014) Resonator probe for photoacoustic measurement. [USQ Project]

Holzner, Katherine (2014) Rigid central safety barriers in constrained road environment. [USQ Project]

Franks, Chris (2014) Safety and efficiency benefits of implementing zip merge treatments in NSW. [USQ Project]

Taylor, Patrick (2014) Supercritical carbon dioxide geothermal energy system analysis. [USQ Project]

Taylor, Patrick (2014) Supercritical CO2 geothermal energy system analysis. [USQ Project]

Nagel, Gregory (2014) System dependant IDMT settings: direct buried underground cable. [USQ Project]

McDowell, Nigel A. J. (2014) Teleprotection signalling over an IP/MPLS network. [USQ Project]

Edwards, D. (2014) Terrestrial laser scanning for 3D zone substation modelling and safety clearances. [USQ Project]

Light, Brenton (2014) Terrestrial laser scanning for building information modelling (BIM) development and application. [USQ Project]

Power, Scott (2014) The affect of lighting interchange ramps on safety – a study of the M1. [USQ Project]

King, Bernie-Anne (2014) The effect of road roughness on traffic speed and road safety. [USQ Project]

Tomasel, Aden (2014) The energy storage potential of a hybrid renewable generation grid connected to a pumped hydro-generation plant for effective connection into the energy market, off peak switchable developing load demand market and act as ancillary regional voltage support and bulk water supply. [USQ Project]

Miller, Nadya (2014) The impact of a new light rail network upon walkability in a central business district. [USQ Project]

Stager, Martin Franz (2014) The impact of compact urban form on the provision of public road transport. [USQ Project]

Carey, Tyler (2014) The thermal performance of an earth sheltered shipping container. [USQ Project]

Kraljik, David (2014) The value of public space – a town square in a small urban community. [USQ Project]

Sweeney, Juliana (2014) Topological optimisation of large reinforced concrete box culverts under SM1600 loads. [USQ Project]

Fairbanks-Smith, Michael S. (2014) Use of fibre-optic (FBG) sensors in the structural health monitoring of a battlefield helicopter rotor blade. [USQ Project]

Byrd, B. (2014) Using desktop hydrologic data to predict fish presence in streams in northern British Columbia. [USQ Project]

Sahay, Akshay Jaishil ORCID: https://orcid.org/0000-0002-8626-2313 (2014) VAR controller for STATCOM solar inverter. [USQ Project]

Yadav, Orunganti Vara Prasad (2014) Voltage control in micro-grids. [USQ Project]

2013

Bowles, Yvonne Elizabeth (2013) A consistent approach to headlight screens in NSW. [USQ Project]

Freeman, Bryan (2013) A preliminary feasibility study for transporting Surat Basin export coal using Maglev technology. [USQ Project]

Long, Derek ORCID: https://orcid.org/0000-0001-9414-5064 (2013) A.R Drone vision-guided searching. [USQ Project]

Bell, Mitchell (2013) Accuracy of a machine guided grader. [USQ Project]

Peckett, Damian (2013) Adaptive Markov decision control of high-frequency drip irrigation systems. [USQ Project]

Mehoub, Gabrel (2013) Adhesive wear and frictional behaviour of glass fibre reinforced thermoset composites. [USQ Project]

Sana, Newman (2013) Air particle monitoring using image processing. [USQ Project]

Basson, Johan (2013) Analysis of the aerodynamic attributes of motor vehicles. [USQ Project]

Stanley, Thomas (2013) Assessment of the FARO 3D focus laser scanner for forest inventory. [USQ Project]

Sussanna, Vittorio (2013) AUSGeoid09 performance in mountainous regions. [USQ Project]

Kerr, Mitchell (2013) Axisymmetric scramjet inlet operation with varying cowl positions. [USQ Project]

Savage, Andrew (2013) Brisbane City Council strategic planning: delivery of sustainable transport. [USQ Project]

Brailsford, Steven (2013) Cathodic protection of reinforced concrete bridges in the marine environment as an asset management tool. [USQ Project]

Horan, Darryl (2013) Comparison of a traditional and a distributed storage water supply network for an isolated system. [USQ Project]

Johnson, Peter (2013) Comparison of direct rainfall and lumped-conceptual rainfall runoff routing methods in tropical North Queensland – a case study of Low Drain, Mount Low, Townsville. [USQ Project]

Rogers, S. (2013) Conjugate heat transfer analysis evaluation of a water cooled component for use in an electric arc furnace. [USQ Project]

McInally, Stuart Anthony (2013) Cost effective galvanising in remote areas. [USQ Project]

Ikin, James (2013) Design and development of a fibre optic microphone. [USQ Project]

Cox, Scott (2013) Design of remote laboratory experiments for integration into MEC2402 – stress analysis. [USQ Project]

Roberts-Apps, Adam (2013) Development of a coal wagon monitoring and control system. [USQ Project]

Szabo, Phillip (2013) Development of a pump efficiency monitor for use in cotton irrigation. [USQ Project]

Griinke, Tyler John (2013) Development of an artificial neural network (ANN) for predicting tribological properties of kenaf fibre reinforced epoxy composites (KFRE). [USQ Project]

Martin, Nathanael John (2013) Domestic lawn mower blade noise and influence of machine geometry. [USQ Project]

Skillington, Robert George (2013) DSP based lock-in amplifier. [USQ Project]

Kohn, Nicholas (2013) Effects of proposed bioretention system on existing waterbird habitat. [USQ Project]

Patel, Kunal J. (2013) Effects of transformer inrush current. [USQ Project]

Dobson, David (2013) Electro muscle stimulus system for wasted muscle rehabilitation. [USQ Project]

Reynolds, Peter William (2013) Engineering correlations for the characterisation of reactive soil behaviour for use in road design. [USQ Project]

Lovett, Jy (2013) Engineering design of a disposable water bottle for an Australian market. [USQ Project]

Metcalfe, Patrick James (2013) Evaluation of remotely piloted aircraft in surveying applications. [USQ Project]

Sebby, Melcuam (2013) Evaluation of roads safety processes currently used in Queensland. [USQ Project]

Hautsalo, Kari (2013) Evaluation of the performance of different global satellite navigation systems (GNSS) for Australian GNSS users. [USQ Project]

Cleaver, Benjamin L. (2013) Evaluation of the performance of web-based GNSS post processing systems. [USQ Project]

Neumann, Philip (2013) Evaluation of the strength characteristics of recycled bituminous pavement materials. [USQ Project]

Jenaway, Brett (2013) Evolution of stadiums: a study in the design and construction of ancient and modern stadia. [USQ Project]

Eaton, Timothy (2013) Exploring the application of closed form solutions in geotechnical problems. [USQ Project]

Serra, Michael Peter (2013) Geotechnical stability analysis using student versions of FLAC, PLAXIS and SLOPE/W. [USQ Project]

Houweling, F. (2013) Human interface device (HID) keyboard application for android. [USQ Project]

Burton-Ree, Nicholas (2013) Hydroelectric generators for third world countries. [USQ Project]

Lanigan, Christopher John (2013) Implementation of a condition monitoring program for high voltage (HV) assets for the Santos GLNG Project. [USQ Project]

Briskey, Kyle Gary (2013) Improving caravan design by modelling of airflow. [USQ Project]

Crawford, Peter Alexander (2013) Improving surfing conditions in conjunction with coastal erosion protection. [USQ Project]

Ellis, N. (2013) Inspection of power transmission lines using UAVs. [USQ Project]

Dinsmore, Robert Colin (2013) Investigating the impact of the Request For Information process in construction. [USQ Project]

Dann, William (2013) Investigation into traffic controller health and safety at road works in Queensland. [USQ Project]

Green, Nathan Andrew (2013) Investigation of cyclist safety within the Brisbane Bicycle Hire Scheme. [USQ Project]

Trevorrow, B. (2013) Investigation of digital audio manipulation methods. [USQ Project]

Wicks, Jaymee (2013) Investigation of factors influencing maximum biogas production of abattoir wastewater. [USQ Project]

Langes, Chris (2013) Investigation of shunt vehicle derailments. [USQ Project]

Burke, Maxwell James (2013) LiDAR data for DEM generation and flood plain mapping. [USQ Project]

Dillon, Megan (2013) Little streets in small cities: the role of laneway activation in regional Queensland CBD revitalisation. [USQ Project]

Tonkin, Kyle (2013) Make Garfield (6 axis robot arm) Smart through the design and implementation of voice recognition and control. [USQ Project]

Hartwig, Andrew (2013) Management of low traffic volume roads unsealed road classification system. [USQ Project]

Geary, A. (2013) Model and analysis of a broken conductor (source isolated) earth fault on radial 11kV distribution feeders. [USQ Project]

Fletcher, Wade Daniel (2013) MUSIC model accuracy in predicting stormwater quality. [USQ Project]

Sams, Mathew Steven (2013) Numerical and physical modelling of a 2D tunnel heading at collapse. [USQ Project]

Petersen, S. (2013) Numerical modelling of minor waterway barriers for fish passage in the Mary River catchment. [USQ Project]

Greig, Edward Stephen (2013) Numerical simulation of water waves in reservoirs affecting evaporation. [USQ Project]

Barrett, Roland (2013) Operating temperature of current carrying copper busbar conductors. [USQ Project]

Keller, Jason (2013) Optimisation of the spoked bicycle wheel. [USQ Project]

Blyth, James Ian (2013) Optimising earth dam design in seasonal freeze-thaw climates. [USQ Project]

Fan, Xinchen (2013) Piecewise adaptive controller design based on ECP model 730 magnetic levitation system. [USQ Project]

Orange, Lachlan (2013) Projectile impacts on hardened alloy steel plate. [USQ Project]

Zeller, Mark Nicholas (2013) Reduced road lighting standards during times associated with low traffic volumes. [USQ Project]

Pestano, Julius Rino (2013) Reducing road fatalities – vehicular ad hoc network. [USQ Project]

Dickmann, Keith (2013) Remote access laboratory design and installation. [USQ Project]

Alawad, Aziz (2013) Response surface methodology. [USQ Project]

Zahl, Michael Stuart (2013) RTK GNSS in cadastral surveying. [USQ Project]

Ennis, Rodney James (2013) ScramSpace hypersonic aerodynamic drag coefficient (CD) determined by free-flight experiments at TUSQ wind-tunnel. [USQ Project]

Birch, Byrenn James Colin ORCID: https://orcid.org/0000-0003-0625-2455 (2013) Simulation of fibre Bragg grating (FBG) reflection spectrums using OptiGrating. [USQ Project]

Campbell, Eyre (2013) Simulation of sawmill yields at Hyne Tuan Pine Mill. [USQ Project]

Herriman, Kayne (2013) Small compressed air energy storage systems. [USQ Project]

Couch, P. (2013) Subtransmission line cost reduction through optimised design, 132 kV Wellington-Dubbo case study. [USQ Project]

Pasanduka, Timothy (2013) Systematic procedure to determine line current differential relay settings with back up distance for a 500 kV ac three phase line. [USQ Project]

Janse van Rensburg, Barnard (2013) The development of a light weight composite conveyor belt idler roller. [USQ Project]

Spilsbury-Brinkmann, Casey (2013) The economic feasibility of upgrading Moree’s light industrial area to legally cater for restricted access vehicles. [USQ Project]

Madanavosa, Savenaca (2013) The effect of efflorescence on the mechanical properties of geopolymers. [USQ Project]

Smith, Wesley (2013) The role of private enterprise in transforming the water, sanitation and hygiene sector in rural sub-Saharan Africa. [USQ Project]

Timings, James (2013) Unmanned aerial vehicle static object detection. [USQ Project]

Ellis, S. (2013) Upgrade of datalogger system. [USQ Project]

Sutcliffe, John William (2013) Urban wind turbine characterization system. [USQ Project]

Kirjan, Jeremy Nicholas (2013) Use of wire extensometers for monitoring pavement performance in areas of slope instability. [USQ Project]

Spurling, Harrison (2013) Water sensitive urban design for sustainable road development. [USQ Project]

Gaffney, Allister Henry (2013) Water sensitive urban design for the Spring Creek catchment and MUSIC sensitivity analysis. [USQ Project]

Johnstone, C. (2013) Wireless communication between dataNode systems. [USQ Project]

White, Christopher (2013) Wireless grain silo monitoring and control. [USQ Project]

2012

Fagg, Ashton (2012) An intelligent vision system for wildlife monitoring. [USQ Project]

Klinge, Craig Desmond (2012) Behaviour of gang-nail plated timber joints in tension perpendicular to the grain. [USQ Project]

Handley, Robert (2012) Carbon offsetting through soil carbon sequestration for the coal mining industry: an application of a soil carbon modelling. [USQ Project]

Smith, Scott David (2012) Determination of a strategic planning approach for maintenance management of a major road network. [USQ Project]

Nielson, Fiona Jane (2012) Development and evaluation of a field mobility data capture system for condition assessment of assets. [USQ Project]

Nobbs, Rebecca (2012) Development of advanced SWER models for the Ergon Energy network. [USQ Project]

Jesshope, Douglas James (2012) Development of an electronically controlled thruster. [USQ Project]

O'Leary, Haydn (2012) Dynamic characterisation of cellular cores and sandwich beams. [USQ Project]

Reed, Mark Edward (2012) Effects of fibres and curing temperature on geopolymer concrete. [USQ Project]

Cameron, Rick (2012) Effects of on-board HHO and water injection in a diesel generator. [USQ Project]

Taylor, Jarrod Lee (2012) Evaluation of the capacity of signalised two lane roundabouts. [USQ Project]

Dang, Aaditi (2012) Herbicides wash off from cane trash by rainfall. [USQ Project]

Warren, Bradley (2012) Investigating mechanisms for effluent pond sealing: the effect of suspended organic particulate on soil hydraulic conductivity. [USQ Project]

Duffy, Michael Anthony (2012) Investigation into the impacts on 11kV feeder operation as a result of the increasing use of amorphous core transformers. [USQ Project]

Osbourne, Daniel B. (2012) IV infusion pump training emulator. [USQ Project]

Flynn, Christopher James (2012) MATLAB based energy market simulator. [USQ Project]

Willigen, Timothy (2012) Nuclear instruments in mineral processing. [USQ Project]

Thompson, Simon (2012) Numerical modelling of Big Tyres patented non-pneumatic wheel concept. [USQ Project]

Clarke, Adam James (2012) Robust deadbeat control of the non-linear magnetic levitation system using adaptive control techniques. [USQ Project]

Hemming, Steven (2012) Sandwich panels for slab applications. [USQ Project]

du Preez, Matthew (2012) Simulation of monolayer distribution for use in evaporation reduction. [USQ Project]

Wieck, Travis (2012) Soil chemistry equilibrium as influenced by solution volume and concentration. [USQ Project]

Black, Gerard Wiiliam (2012) The investigation of the sustainability of a regional approach to Water Sensitive Urban Design using a Triple Bottom Line Assessment. [USQ Project]

Whittaker, Adam (2012) The safety benefit of continuous narrow painted median strips. [USQ Project]

Bates, Matthew (2012) The selection of inegrated and sustainable waste processing techniques for application within Indonesia. [USQ Project]

Lonard, Craig Stephen (2012) Urban fringe agriculture and its potential contribution to sustainable cities: a case study of Western Sydney. [USQ Project]

Palmer, John Michael (2012) Wireless LAN based infrared remote control. [USQ Project]

2011

Marion, Michael (2011) A comparison of AUSGeoid09 and AUSGeoid98 in the Hawkesbury Valley. [USQ Project]

Strahley, Matthew (2011) A comparison of depth sounder positioning techniques for hydrographic/bathymetric surveys. [USQ Project]

Motswagae, Tshepo (2011) A laboratory experiment based on the ‘Segway’. [USQ Project]

Fichera, Anthony (2011) A practical comparison of VISSIM and SIDRA for the assessment of development impacts. [USQ Project]

Randall, Neil William (2011) A preliminary analysis of the effectiveness of the new QLD GDL program. [USQ Project]

Peters, Renee (2011) Advanced analysis of shallow foundations located near slopes. [USQ Project]

Heit, Andrew (2011) An investigation into the parameters that affect the swell factor used in volume and design calculations at Callide open cut coal mine. [USQ Project]

Temple-Watts, Philip (2011) An investigation into the suitability Of volunteered information to create a flood extent map. [USQ Project]

Keleher, Matthew (2011) Analysis of high-speed rural traffic crashes within the South-West district of Toowoomba regional council. [USQ Project]

O'Keeffe, Andrew (2011) Behaviour of polymer concrete for infilling fibre composite tubes. [USQ Project]

Hockey, Josh (2011) Biometric analysis for remote examination system. [USQ Project]

Leong, Ik Sung (2011) Broadband satellite internet service testing. [USQ Project]

Penman, Brian (2011) Calculation and comparison of the noise and latency of RTK observations using radio link and NTRIP. [USQ Project]

Truasheim, Barak (2011) CFD modelling of a pump intake. [USQ Project]

Tomkins, Brock William (2011) Chemical resistance of geopolymer concrete against H2SO4 & NaOH. [USQ Project]

Harrington, Daniel (2011) CSG water as a medium to grow marine microalgae for biofuel production. [USQ Project]

Seccull, Christopher (2011) Darwin residential end use pilot study. [USQ Project]

Walsh, Dan (2011) Design and retrofit a compressed gas powered engine to a motor scooter. [USQ Project]

Brown, Steven (2011) Design of a high-shear geopolymer concrete mixer. [USQ Project]

Alexis, Jeremie (2011) Developing a home-based functional application for an EEG-based brain computer interface. [USQ Project]

Kmita, Shane (2011) Echo cancellation in VoIP using digital adaptive filters. [USQ Project]

Wilson, Paul (2011) Effectiveness of lime stabilisation on reactive soils for main roads. [USQ Project]

Delahunty, Bruce (2011) Elevated highways – a solution to Brisbane’s traffic congestion? [USQ Project]

Zeller, Karl (2011) Evaluation of the operational characteristics of heavy vehicles at signalised intersections in Queensland. [USQ Project]

Mautoga, Marau (2011) Fracture toughness of glass powder reinforced vinyl ester resin post cured in a conventional oven using flexural test. [USQ Project]

Wilson, Wayne (2011) Housing affordability in Roma: can progress be made within the regulatory and policy framework? [USQ Project]

Morris, Mike (2011) Implementation of electronic measurement and recording of strata title field notes. [USQ Project]

Turnbull, Jon (2011) Improving the performance of the Nanango wastewater treatment plant. [USQ Project]

Case, Jiel (2011) Initial design of a high-performance and cost-effective mountain bike. [USQ Project]

Kemp, Ryan (2011) Investigates the effect of surface shear on pavements near road intersection. [USQ Project]

Craig, Aston J. (2011) Investigation into a fleet bearing monitoring system. [USQ Project]

Fenn, Scott P. (2011) Investigation into relocatable home design and construction. [USQ Project]

Bauer, Amelia (2011) Investigation into the biochemical methane potential of abattoir wastewater. [USQ Project]

McDonald, Matthew (2011) Investigation into the limitation of measuring to 360 Degree prisms using automatic target recognition technology. [USQ Project]

Bruce, Thomas (2011) Investigation of cost and performance characteristic of photovoltaic panels. [USQ Project]

Davydov, Alexey (2011) Investigation of the structural failure of plywood noise barriers. [USQ Project]

Dakin, Anthony (2011) Investigation of the suitability of finger jointed structural timber for use in nail plated roof trusses. [USQ Project]

Graham, Kim (2011) Local government greenhouse gas abatement reporting. [USQ Project]

Olm, David William Charles (2011) Management of road reconstruction and repair following a flooding disaster. [USQ Project]

Fitzgerald, Danial (2011) Managing the repair of transport infrastructure after a natural disaster. [USQ Project]

Tan, Yian Yian (2011) Measuring with Bees II: in home power and water monitoring. [USQ Project]

Mandava, Jagan (2011) Mechanical behaviour of polymeric composition based on available natural fibres in Australia. [USQ Project]

Ward, Tristan (2011) Multicore algorithms for image alignment. [USQ Project]

Pratt, Daniel (2011) Near infrared photogrammetric technique on structure beam monitoring. [USQ Project]

Ryan, Richard (2011) Optimisation of flow through a horizontal spiral baffled filter. [USQ Project]

Veenstra, Nathaniel (2011) Optimum strut-and-tie model for a cantilever curved wall. [USQ Project]

Meredith, Tyronne (2011) Options for the replacement of aging bridges under local authority control in rural areas of Queensland. [USQ Project]

Mohr, David (2011) Performance characterisation of pressure regulation devices used in broad-acre irrigation. [USQ Project]

Maher, Daniel (2011) Projection of computer design data onto digital photographs. [USQ Project]

McHugh, William (2011) Properties of nickel as a magnetostrictive material for ultrasonic conditions. [USQ Project]

Millard, Aaron (2011) Property rights, cadastral boundaries & coastal erosion in New South Wales. [USQ Project]

Evans, Darryl (2011) Prototype development for a procurement and electronic document management system. [USQ Project]

Brookshaw, Iain (2011) Real time implementation of obstacle avoidance for an autonomous mobile robot using monocular computer vision. [USQ Project]

Peauril, Joshua (2011) Recycling glass fibre composites – process and viability. [USQ Project]

Farrington, Jock (2011) Redesign of an FSAE race car’s steering and suspension system. [USQ Project]

Harriman, Adam J. (2011) Smart Grid for tomorrow’s electricity distribution. [USQ Project]

Dudley, Samuel (2011) Stability of underground tunnelling using relaxation techniques. [USQ Project]

Cox, Adam (2011) Stereo vision for webcams. [USQ Project]

Kilian, Simone (2011) Sugarcane bagasse reinforced thermoplastic composites. [USQ Project]

Rackemann, Benjamin (2011) The analysis and redesign of the spraycam sprayer to incorporate fibre composite pultrusions. [USQ Project]

Ledger, Allen (2011) The development of a high precision terrestrial laser scanner calibration range at USQ. [USQ Project]

Searle, Joshua (2011) The efficient use of building mechanical services for saving energy. [USQ Project]

Atem, Thiew (2011) The skid mounted substation. [USQ Project]

Lenton, Paul (2011) Use of near-infrared photogrammetry to determine crack and surface deformation in small structures. [USQ Project]

Heaton, Erin (2011) Use of vibration signature in structural health monitoring (composite/internal damages). [USQ Project]

Yin, Matthew (2011) Using local gravel sources and granular stabilisation for the production of pavement gravels in the Toowoomba region. [USQ Project]

Nixon, Phillip (2011) Using sun observations to set an azimuth combining and comparing Automatic Target Recognition in a Total Station with GPS observed time and position. [USQ Project]

Prasad, Nitesh Nitin (2011) Verification of simplified optimum designs for reinforced concrete beams. [USQ Project]

2010

Smith, B. (2010) A biomechanical analysis for improved ergonomics in metal detector products using trajectory optimisation. [USQ Project]

Cox, Jeremy Neil (2010) Advantages and practicality of using a 2D hydrodynamic model in comparison to a 1D hydrodynamic model in a flood prone area. [USQ Project]

Rowlings, David Selwyn (2010) An experimental and theoretical investigation of side weirs. [USQ Project]

Skipworth, Julian (2010) An investigation and quantitative analysis of the impacts on stream flow and fluvial erosion associated with urbanisation of a small catchment. [USQ Project]

Weyman-Jones, Ashley (2010) An investigation into the accuracy and limitations of automatic target recognition in total stations. [USQ Project]

Stanley, Matthew (2010) An investigation into the Australian height datum on Ballina Island. [USQ Project]

Madden-Holmes, Ben (2010) An investigation into the legislative changes affecting tidal boundaries in Queensland. [USQ Project]

Assiriyage, Buddhi Nuwan Lanka (2010) An investigation of aluminium/eproxy particulate composite system - impact/long-term behavior. [USQ Project]

Shaw, Mark Andrew (2010) An investigation of roles and development pattern of regional airports, Queensland Australia. [USQ Project]

Klibbe, Christopher Aaron (2010) An investigation on the high water mark as a land boundary. [USQ Project]

Alenazi, Saud Khlaif K. (2010) Analysis and taxonomy of network quality of service (QoS) concepts in the long term evolution/system architecture evolution (LTE/SAE) System. [USQ Project]

Clarke, Jason (2010) Analysis of data to develop models for spray combustion. [USQ Project]

Palmer, Matthew Alan (2010) Analysis of the feasibility of a 3D model for use in civil construction (creating a 3D model for the first span of a bridge). [USQ Project]

Coe, Daniel (2010) Asset management for Tamworth Regional Council’s sewer network. [USQ Project]

Stanton, Dale John (2010) Atterberg limits and their relationship to longitudinal cracking in granular pavements. [USQ Project]

Walker, Cameron (2010) Automated soil compaction machine for the preparation of Califorian bearing ratio and proctor specimens. [USQ Project]

Di Bella, Robert Michael (2010) Biogas generation from an anaerobic pond 'abattoir'. [USQ Project]

Mowat, David (2010) Callide C Power Station's generator protection system 'ride through capabilities' for various external faults. [USQ Project]

Donald, Michael Craig (2010) Comparative properties of epoxy/sawdust composites with palm oil cured by microwave and thermal treatment. [USQ Project]

Fahey, Lawrence John (2010) Decision support system for assessing the benefits of incorporating swabbing facilities into water pipelines. [USQ Project]

Reimers, Anthony Steven (2010) Design and Manufacture of a Mechanical Fatigue Testing Machine. [USQ Project]

Lewers, Glyn Alan (2010) Design of a frame/structure for a large wastewater treatment pond. [USQ Project]

Perry, Ramon (2010) Design of a small wind turbine for a rural community in Australia. [USQ Project]

Turner, Roland James (2010) Design of a Small Wind Turbine for a Rural Pumping Application. [USQ Project]

Miller, Justin (2010) Design of a wireless acquisition system for a digital stethoscope. [USQ Project]

Daly, James (2010) Design, construction and performance of buildings foundations on soft clays in the Brisbane region. [USQ Project]

Hicks, Ryan (2010) Developing Road Asset Management Systems Utilising Spatial Technologies. [USQ Project]

Walter, Nathan Johan (2010) Development of a bridge asset management plan for Southern Downs Regional Council. [USQ Project]

Gibbons, Anthony (2010) Development of a laser pointer mouse. [USQ Project]

Thomas, Benjamin Brett (2010) Development of a tournament management system. [USQ Project]

Wilson, Bede (2010) Development of an unmanned aerial vehicle for use during disaster situations. [USQ Project]

Tai, Ping (2010) Dielectric, thermal and mechanical properties of sawdust reinforced epoxy composites post-cured in microwaves. [USQ Project]

Martin, Joseph A. (2010) Driving problems encountered in the UAE by newly arrived expatriates and tourists. [USQ Project]

Caunce, Catherine May (2010) Effective road pavement design for expansive soils in Ipswich. [USQ Project]

Bailey, Thomas Sullivan (2010) Environmentally friendly natural waste materials for use in civil structures. [USQ Project]

Gibson, David Eric (2010) Evaluating comparative performance of various shaped bridge piers: experimental investigation of sediment transport and scouring. [USQ Project]

Kennedy, Jotham Ariel (2010) Experimental investigation into the uplift capacity of ground anchors in sand. [USQ Project]

Gould, Adam Mark (2010) Finite volume solution of the unsteady free surface flow equations. [USQ Project]

Philips, Cameron Charles MacGregor (2010) Gladstone Power Station demineralised water plant asset strategy development. [USQ Project]

NG, Benjamin Woon Soon (2010) Grid-Connected Solar Photovoltaic System. [USQ Project]

Commons-Fidge, Ian G. (2010) Grinding mill conceptual design developments. [USQ Project]

Coggan, Robert Walter (2010) High impedance earth fault modelling. [USQ Project]

Pufelski, Nadine (2010) How effective is microalgae treatment of different wastewaters for simultaneous nutrient removal and lipid production for bio-fuel? [USQ Project]

Cooper, Mark Dennis (2010) Improve waste recycling potential through the conversion of normal household waste into biogas. [USQ Project]

Hanson, Scott (2010) Improvement and performance of pavement gravels used by Toowoomba Regional Council for unsealed roads. [USQ Project]

Grygorcewicz, Jon-Paul Frederick (2010) Improvement of hydrocarbon dew point determination via gas chromatography. [USQ Project]

Baker, Stuart (2010) Induced draft (ID) fan lubrication system design review and proposed modification upgrade at Callide C Power Station. [USQ Project]

Jordan, Timothy J. (2010) Intrusion and anomaly detection in computer networks using signal processing approaches. [USQ Project]

Malvern, Jerome Liam (2010) Investigation of high impact capacity composite material for civil infrastructure. [USQ Project]

Zanetti, Ashley (2010) Investigation of pavement design for low volume rural roads. [USQ Project]

Muller, Zach Anthony (2010) Investigation of solar thermal energy alternatives and their applications to water heating and air cooling in the meat processing industry. [USQ Project]

Priebbenow, Paul (2010) Investigation of the Methods of Testing Lead-Acid Battery Health by means of Discharge and Impedance Testing. [USQ Project]

Barnett, Paul Jonathan (2010) Life cycle assessment (LCA) of liquefied natural gas (LNG) and its environmental impact as a low carbon energy source. [USQ Project]

Magarry, Anthony John (2010) Management of physical assets – advanced asset management planning. [USQ Project]

Huntley, Matthew Mark (2010) Mapping cycling pathways and route selection using GIS and GPS. [USQ Project]

Elphinstone, Aaron Daniel (2010) Optimisation of pigging infrastructure in design. [USQ Project]

Davies, Neil (2010) Pedestrian characteristics and control for the Toowoomba city centre master plan area. [USQ Project]

Gelding, Peter William (2010) Prioritising locations for investment based on threats to reptiles and ecosystems within the Condamine Catchment. [USQ Project]

Bishop, Damon Thomas (2010) Pump gland improvement project. [USQ Project]

Hansen, Leigh (2010) Quantifying the reduction in hydraulic conductivity of disturbed soil columns as a function of the salinity and sodicity of applied water. [USQ Project]

Frazer, Peter (2010) Relational contracting – investigation of relational contracting behaviours across various project delivery models. [USQ Project]

Piok, Dhieu Magot (2010) Remotely accessible 35 kVA diesel backup generator. [USQ Project]

Jones, Simon (2010) Stop-go mobile mapping. [USQ Project]

Slack–Smith, David (2010) Structural design, quotation and production support using parametric CAD tools and national/international standards for fluid storage systems. [USQ Project]

Bajracharya, Rohan Muni (2010) Structural evaluation of concrete-expanded polystyrene sandwich panels for slab applications. [USQ Project]

Turner, Alan (2010) Structural performance of cross laminated timber panels as walls. [USQ Project]

Nawratzki, Guy (2010) Suspension development for a short circuit racing car. [USQ Project]

Pola, Nigel Peter (2010) Synthesis of modified phenolic resins using renewable materials for advanced composites in civil engineering structures. [USQ Project]

Cameron, Kirsty (2010) Technical feasibility of a salinity trading scheme for the licensing of coal mine discharges in the Fitzroy Basin. [USQ Project]

Kiongoli, Said (2010) Testing the accuracy of machine guidance in road construction. [USQ Project]

Marstella, Joseph Edward (2010) The concept, analysis and critical thinking involved in flow net theory - a project based learning approach using cofferdams. [USQ Project]

Salomon, Jake (2010) The design and construction of an exercise device for use in physiotherapy of the arm. [USQ Project]

Morrison, Scott James (2010) The development and testing of a high precision ellipsoidal - Australian height datum deformation grid for real time GPS applications. [USQ Project]

Kirkland, Rhys (2010) The development of a small scale gas turbine to assist in the analysis of coal seam gas as an alternative stationary jet fuel for Australia. [USQ Project]

Haenke, Michael (2010) The development of a wind and solar power calculator for use within the private sector. [USQ Project]

Millers, Paul Gordon (2010) The effects of small distributed generation on the electrical distribution network. [USQ Project]

Day, Michael Peter (2010) The implications regional ecosystem mapping has on land development proposals in rural Queensland. [USQ Project]

Harch, Brian Joseph Luke (2010) The investigation into the optimisation of cross laminated timber panels for use in the Australia building industry. [USQ Project]

Seccombe, Andrew James (2010) The use of Fibre Bragg Grating (FBG) sensors in geotechnical applications. [USQ Project]

Hagan, Gavin Raye (2010) Tubular Screw Conveyor Modelling. [USQ Project]

Downing, Matthew (2010) Upon the construction of a remote controlled tracked reconnaissance vehicle. [USQ Project]

Duncan, Jeremy Bruce (2010) USB camera pedestrian counting. [USQ Project]

Caudell, Clinton Frank (2010) Visualising traditional boundaries in Papua New Guinea using GIS 'zones of uncertainty'. [USQ Project]

2009

Cole, Andrew James Shorten (2009) A comprehensive study of footing on c-φ soil slopes - numerical and physical modelling. [USQ Project]

Dakers, Nicole (2009) A cost benefit analysis of rural residential water supply – constant flow vs. full pressure. [USQ Project]

Reinbott, Nigel (2009) A review and update of the supply chain documentation within Amcor Flexibles. [USQ Project]

Mulliss, Michael Stephen (2009) A review of the application of adverse possession within the Torrens system of land regulation in Australia. [USQ Project]

Jordan, Benjamin W. D. (2009) A touch-screen controlled 'Linear Predictive Synthesizer' for accessibility applications. [USQ Project]

Milne, G. (2009) Airframe development and flight testing for entry into the 2009 Outback Challenge. [USQ Project]

Crone, Jeffrey John (2009) Alternate pavement types on reactive soils in the Ipswich Council area. [USQ Project]

Brice, Joshua (2009) An investigation into the Victorian permanent survey mark infrastructure. [USQ Project]

Wady, Vaughan (2009) An investigation of land and property information (NSW) proposed E-Plan process of digital survey plan lodgement in LandXML format. [USQ Project]

Goodwin, Brent (2009) Analyse original marks and occupation used to reinstate boundaries for identification surveys. [USQ Project]

Davis, Kieren Peter (2009) Application of an urban runoff model using surface specific parameters. [USQ Project]

Surtees, Mark Stephen James (2009) Bathymetric survey of flooded open cast mine workings. [USQ Project]

Plain, Matthew (2009) Behaviour of innovative fibre composite sandwich panels for structural applications. [USQ Project]

Pickford, Christopher Ian (2009) Behaviour of laminated fibre composite sandwich girders. [USQ Project]

Jones, Jeffrey Francis (2009) Comparison of robotic total stations for scanning of volumes or structures. [USQ Project]

Mayen, David Ayuen (2009) Composites from natural renewable resources in civil engineering: Epoxidized vegetable oil with epoxy resin, fly ash and sawdust fillers(mechanical, physical and structural properties). [USQ Project]

Lyle, Nathan Ross (2009) Comprehensive design charts for the footing on slope problem. [USQ Project]

Gould, Nicholas (2009) Conceptual design of a sustainable energy-waste solution for the residential sector. [USQ Project]

Drew, Aaron Matthew (2009) DEA control interface, power system analysis, synchronisation and load management controls - design, construction and commissioning. [USQ Project]

Campbell, Andrew Charles (2009) Deriving a high resolution DEM from ALOS PRISM data. [USQ Project]

Vaipulu, Seini 'Ela Uatekini (2009) Design a prototype solar dryer for drying sea cucumber. [USQ Project]

Fitzhenry, Ryan (2009) Design and develop virtual reality games utilising the 'anti‐gravity' arm support for stroke rehabilitation therapy. [USQ Project]

Howarth, Rowan (2009) Design and documentation of Bairnsdale regional landfill - Cell 3 Johnston’s Road, Bairnsdale. [USQ Project]

Kirsch, Joshua (2009) Design of a small wind turbine for electric power generation(1-5kW). [USQ Project]

Kuan, Siew Yeng (2009) Design, construction and operation of the floating roof tank. [USQ Project]

Assiriyage, Buddhi Nuwan Lanka (2009) Develop a computer-based system to assess and exercise the arm movement of stroke patients. [USQ Project]

O'Shannassy, Geoffrey Mark (2009) Development of a driver training simulator for use by stroke patients. [USQ Project]

Backman, Shane A. (2009) Development of a high voltage DLA test apparatus. [USQ Project]

Douglas, Nadine Sarah (2009) Development of an asset maintenance program for Darwin City Council. [USQ Project]

Camplin, Tony (2009) Development of methods to monitor continuously operating reference station antenna stability. [USQ Project]

Althaus, Kimberley (2009) Effect of irrigation management on nitrate movement under a lettuce crop. [USQ Project]

Grimm, Justin John (2009) Electromagnetic linear actuator - design, manufacture and control. [USQ Project]

Jones, Adam (2009) Enabling voice calls via a wireless broadband router. [USQ Project]

Manthey, Nathan William (2009) Environmentally friendly natural fibre composites with Qld. based vegetable oils. [USQ Project]

Cooney, Tyson (2009) Epoxidised resins from natural renewable resources. [USQ Project]

Wise, Timothy Glen (2009) Error resilient H.264 coded video transmission over wireless channels. [USQ Project]

Huq, Rezwanul (2009) Flexural strength of three types of glass powder reinforced vinyl ester composites. [USQ Project]

Korowa, Geoffrey (2009) Fracture toughness of glass powder reinforced vinyl ester resin. [USQ Project]

Burton, Bruce (2009) Griffin Road drainage diversion – feasibility study. [USQ Project]

Brandis, Cameron (2009) High voltage earthing system testing - an investigation into the effects of test lead coupling on test results. [USQ Project]

Sankowsky, Brendan (2009) Hydraulic conductivity response of soils to synthetic laundry greywater. [USQ Project]

Houghton, Richard (2009) Impact of tailings subsidence on rehabilitated landform erosional stability. [USQ Project]

Taylor, Benjamin Allan (2009) Improving accuracy of rainwater tank hydrologic yield estimation across Queensland. [USQ Project]

Wu, Chao di (2009) Investigate the best percentage by weight of glass powder, as fillers in phenolic resins by using tensile tests. [USQ Project]

Koschel, Michael (2009) Investigation into reliability of AUSPOS coordinate data (specifically height). [USQ Project]

Day, Anthony (2009) Investigation into the causes and possible remedies for the registered surveyor shortage in regional Queensland. [USQ Project]

Hosking, Alan (2009) Investigation into the effectiveness of reflectorless technologies on structural surveillance monitoring. [USQ Project]

Shears, Steven Edward (2009) Investigation of life cycle management of electromagnetic flow meters. [USQ Project]

Chan, Zee Hong (2009) Investigation of next generation IEEE 802.11n wireless local area networks (WLAN). [USQ Project]

Bichel, Mitchell Neil (2009) Investigation of the quality management system at Lockyer Valley Regional Council. [USQ Project]

McMahon, Craig Andrew (2009) Investigation of the quality of water treated by magnetic fields. [USQ Project]

Saunders, Michael Joseph (2009) Investigation of the relationship between experimental bridge piers and erosion within a flow. [USQ Project]

Ling, Damian James (2009) Investigation of the Riegl terrestial scanners - uses and limitations. [USQ Project]

Taylor, Alan Owen (2009) Investigation on the fatigue behaviour of pultruded fibre composites. [USQ Project]

Porter, Hannah Elizabeth (2009) Involvement of older drivers at crashes at unsignalised and signalised intersections. [USQ Project]

Smith, Travis (2009) Ipswich City Council development assessment: streamlining the process. [USQ Project]

Supandy, Mohammed (2009) Life cycle assessment of ultra pure water plant in semiconductor industry. [USQ Project]

Munro, Frazer (2009) Localised geoid modelling using GPS and precise levelling data. [USQ Project]

Taylor, Oliver John (2009) Market segmentation for improved efficiency of Ipswich water supply system. [USQ Project]

Eddine, Mustapha Jamal (2009) Measurement of fracture toughness, mechanical and electrical loss tangents of calcium carbonate reinforced vinyl ester composites. [USQ Project]

Dann, Jeffrey Michael (2009) Modernisation of an existing irrigation area. [USQ Project]

Mead, Stuart (2009) Numerical modelling of horizontal flow in sand filters. [USQ Project]

Yu, Yu Wah (2009) Pile driving analysis via dynamic loading test. [USQ Project]

Lascalles, Alex (2009) Potential impact of rising sea level on land ownership and government planning. [USQ Project]

Cunningham, Mitch (2009) Profiling coal on a conveyor belt for the automation of a train loadout facility. [USQ Project]

Willisch, S. (2009) Programming Sun(TM)SPOTs (Small Programmable Object Technology) in Java(TM). [USQ Project]

O'Shea, Darren (2009) Proposal to incorporate volumetric (three dimensional) subdivisions in Victoria. [USQ Project]

Blaby, Bradley Peter (2009) Re-establishment of the state border between New South Wales and Victoria. [USQ Project]

Kinast, Matthew (2009) Real-time data transmission and control of a Neocot over the internet. [USQ Project]

Christensen, Zane Michael (2009) Reduction of local scour around bridge piers: combined system of aerofoil and slot. [USQ Project]

Coaker, Leigh Herbert (2009) Reflector-less total station measurements and their accuracy, precision and reliability. [USQ Project]

Parry, Aaron (2009) Remote aerial data acquisition and capture project (RADAC). [USQ Project]

Scoines, Barry William (2009) Replacement of steam turbine drive with electric drive. [USQ Project]

Jeffery, Simon (2009) Review of failure mode, effect and criticality analysis (FMECA) on major equipment of the crushing and screening plant at the BORAL Quarry at Ormeau, Queensland. [USQ Project]

Hopson, Matthew (2009) SCADA and RFI interference on RTK surveys. [USQ Project]

Armstrong, Andrew Jonathan (2009) Sealing works performance study. [USQ Project]

Eckard, Lawrence Francois (2009) Setting up an engineering asset management system for a small local government council. [USQ Project]

Hugo, Sarah (2009) Simulation and analysis of MIMO-OFDM for a 4G cellular network. [USQ Project]

Coates, Gary (2009) Steering and suspension design for a SAE-A formula race car. [USQ Project]

Summerville, Cameron (2009) Structural performance of low grade timber slabs. [USQ Project]

Smith, Anthony Patrick (2009) Surveying and the law. [USQ Project]

Zerbst, Samuel David William (2009) Temperature effects on a fibre reinforced polymer material. [USQ Project]

Zhong, Xiaoliang (2009) Tensile strength of sawdust reinforced vinyl ester composites. [USQ Project]

Baker, Philip James (2009) The 50 kph speed limit in residential Toowoomba. [USQ Project]

Deas, Scott (2009) The accuracy of published co-ordinates on the 'Survey Mark Enquiry Service’(SMES)in Victoria using GPS observations. [USQ Project]

Maruping, Pako (2009) The design and construction of a large scale-force feedback joystick for the use in physiotherapy. [USQ Project]

Garratt, Blythe Jonathan (2009) The development of a wrist rehabilitation device for movement therapy. [USQ Project]

Rennie, Tristan James (2009) The effect of vandalism on fibre composite structures. [USQ Project]

Wall, Adrian (2009) The use of a terrestrial laser scanner in an open cut mining environment. [USQ Project]

Langdon, Aaron G. (2009) Traffic induced moisture entry into road pavements. [USQ Project]

Coulter, Allison Kerrie-Anne (2009) Use of Fiber Bragg grating sensors in structural health monitoring. [USQ Project]

Arnison, Christopher John (2009) Using ground penetrating radar (GPR) with multiple pass scans to improve 3D positional reliability of subterranean features. [USQ Project]

2008

Heng, Fook Hai (2008) 3D Terrestrial laser scanning for application in earthwork and topographical surveys. [USQ Project]

Dorahy, Will Paul (2008) A comparison of remotely sensed terrestrial spatial information. [USQ Project]

Mayo, Benjamin Marc (2008) A Review of a cadastral boundary adjustment software program. [USQ Project]

Arnold, Matthew David (2008) A two-dimensional analysis of the bearing capacity of footings near slopes. [USQ Project]

Padda, Ranjit Singh (2008) Air flow through two layered mesh at varying porosity and spacing. [USQ Project]

Fraser, Mark John (2008) Analysis of a no-till toolbar for a two wheeled tractor. [USQ Project]

Jesshope, Ashlee Elizabeth (2008) Bike tour plan for Toowoomba region. [USQ Project]

Boskovic, Selina (2008) Bioretention basin best practice design guidelines. [USQ Project]

Miller, P. (2008) Building a two wheeled balancing robot. [USQ Project]

Gardner, Craig (2008) Carbon nanotubes (CNT) as potentially a more effective material for photovoltaic (PV) converters. [USQ Project]

Thompson, Robert William (2008) Centreline tools upgrade. [USQ Project]

Wai-Ming, Yeung (2008) Confirmation program of safety inspection of lift components (CPSI). [USQ Project]

Crawford-Ross, Michael Richard (2008) Control of accumulator in a continuous processing line. [USQ Project]

Long, Geoffrey Michael (2008) Deriving land use and land cover maps from 2.5m SPOT 5 imagery. [USQ Project]

Steger, Jason P. (2008) Deriving transformation parameters for existing survey co-ordinate systems in the Australian Capital Territory. [USQ Project]

Pijpers, Louis Kennedy (2008) Design and implementation of a microprocessor-controlled BMX start gate. [USQ Project]

Springall, Glenn (2008) Design and implementation of a remotely accesible inrush current testing package for power (distribution)transformers. [USQ Project]

Strong, Simon James (2008) Design of a small wind turbine. [USQ Project]

Howard, Damian John (2008) Determination of property boundaries in NSW where monument movement has occurred. [USQ Project]

Alanne, Glen (2008) Developing a model to predict water main failures. [USQ Project]

Taylor, Scott (2008) Development and testing of a portable GNSS network solution using the magellan propark3. [USQ Project]

Hetherington, Chris (2008) Effectiveness of real time kinematic global navigation satellite system suveying (RTK GNSS). [USQ Project]

Clemence, Andrew John (2008) Error resilient JPEG2000 transmission over wireless fading channels. [USQ Project]

Vincec, Paul Michael (2008) Feasibility study: into the design, effectiveness & limitations of installing raingardens within an inner urban environment. [USQ Project]

Sawchuk, Mike (2008) Flexural strength SLG-reinforced phenolic composites cured in microwaves. [USQ Project]

Yavu, Isei Ledua (2008) Fracture toughness of phenolic resins composite by using saw dust as filler of percentage by weight. [USQ Project]

Mendis, Marina Shanil (2008) Functional observer for glucose regulation. [USQ Project]

Curran, Liam Patrick (2008) Global navigation satellite systems for geodetic network surveys. [USQ Project]

Lear, Foster Robert (2008) Hoist system for small boat stacker. [USQ Project]

Pickford, Jeffrey (2008) How to establish map projections to facilitate the use of GPS on ground-based surveys. [USQ Project]

Paech, Simon (2008) Human electromagnetic radiation exposure. [USQ Project]

Stevenson, Cameron Laurence (2008) Improving information management & project proposal automation at Data#3. [USQ Project]

Donohue, Rachael Michelle (2008) Inspiring high precision dam water depth measurement with novel 'bubbler’ designs. [USQ Project]

Gibson, Duane Nikalia (2008) Interaction of recycled concrete and geogrid reinforcement material 14m high reinforced earth wall. [USQ Project]

Cecil, Travis (2008) Investigate the best percentage by weight of glass powder, as fillers in phenolic resins using tensile tests. [USQ Project]

Hardy, Glen (2008) Investigation into the performance of first flush systems for diesel engine based pollution on roof runoff. [USQ Project]

Walton, Joshua Graeme (2008) Investigation of a variable ride height suspension for an automobile. [USQ Project]

Walters, Kieren A. (2008) Investigation of construction practices and test procedures for road pavements on expansive subgrades. [USQ Project]

Mead, Nicola (2008) Investigation of domestic water end use. [USQ Project]

Watson, Joshua Francis (2008) Investigation of the bearing capacity of shallow footings located near slopes. [USQ Project]

Zong, Xuejin (2008) Investigation of the best percentage by weight of glass powder as fillers, in phenolic resins using flexural tests. [USQ Project]

Nixon, Robert Jeffrey (2008) Investigation of the best percentage, by weight, of glass powder as filler in phenolic resin using three point bending test. [USQ Project]

Huston, Thomas Clifford (2008) Investigation on the adequacy of disinfection in Toowoomba's water supply network. [USQ Project]

Bissett, Michael James (2008) Investigation on utilising real time kinematic (RTK) global navigation satellite systems (GNSS) for electronic distance measurement (EDM) baseline calibration and traceability of measurement. [USQ Project]

Menetrier, Paul L. (2008) Machine vision based traffic monitoring with real time tracking. [USQ Project]

Kelman, Oliver (2008) Measuring and monitoring of grain silos using laser scanning and total stations. [USQ Project]

Lauder, Paul (2008) Performance evaluation of low-density parity-check codes. [USQ Project]

Salomon, David Scott (2008) Position control using a digital servo system. [USQ Project]

Rohde, Craig (2008) Preliminary water balance models of the Daly river catchment. [USQ Project]

Cleary, Edward Thomas (2008) Pulsed liquid jet for rock breaking. [USQ Project]

Whiteford, Mark (2008) Relationship contracting in the mineral processing industry. [USQ Project]

Lamari, Alfio Concetto (2008) Rolling stock bearing condition monitoring systems. [USQ Project]

Taylor, Timothy Noel (2008) Rural arterial road operating speed assessment. [USQ Project]

Tart, Benjamin (2008) Simulation of GPS car navigation systems in evaluating the impact of poor quality road data. [USQ Project]

Harris, Bruce Robert (2008) South East Queensland waterways, land use and slope analysis. [USQ Project]

Hugo, David (2008) Speech compression system for student feedback. [USQ Project]

Muorwel, Reec Rodolfo (2008) Supervisory control of material handling conveyor belt system. [USQ Project]

Shekhar, Shashi (2008) Tensile strength of sawdust reinforced phenolic resin composite materials. [USQ Project]

Cech, Samuel (2008) The commercial implications of the NZ surveyor-general's rules for cadastral survey 2008. [USQ Project]

Prasser, Nathan (2008) The development of a computer based system for the rehabilitation of arm movements of stroke patients. [USQ Project]

Carden, Scott Benjamin (2008) The development of an antigravity arm to assist in the rehabilitation of stroke patients. [USQ Project]

Goodall, Joshua Edward Allan (2008) The effect of the 50km/h implementation on local streets in Toowoomba. [USQ Project]

Drysdale, Dirk MacDonald (2008) The effectiveness of an aerofoil shaped pier reducing down stream vortices and turbulance. [USQ Project]

Waldock, David A. (2008) The maintenance of 'moment continuity' within structural concrete beam steps. [USQ Project]

Adams, Nicholas John (2008) The pedestrianisation of inner city Toowoomba. [USQ Project]

Ole, Zayne Kristian (2008) Track stability and buckling - rail stress management. [USQ Project]

Shellshear, Michael Stuart (2008) Urban stormwater treatment using chitosan. [USQ Project]

Watt, Andrew Thomas (2008) Validation of cooling grid model and testing of alternatives. [USQ Project]

Black, Jamie Richard (2008) Validation of the Sydnet, continuously operating reference stations for use in global navigation satellite system surveying. [USQ Project]

Shann, Blaise N. (2008) Variable rate bitumen spraying in road construction and resurfacing. [USQ Project]

Marais, Tom (2008) Virtual reference station (VRS) in South Africa. [USQ Project]

Kenna, Brian (2008) Water metering and revenue protection. [USQ Project]

2007

Price, Daniel (2007) A comparative review of attributes of engineers in senior management roles. [USQ Project]

Malpress, Ray (2007) A new internal combustion engine configuration - opposed piston with crank offset. [USQ Project]

O'May, David Victor (2007) A study of pavement performance on the Gatton Bypass Duplication. [USQ Project]

Sinderberry, Mark (2007) Accuracy assessment of 3D laser scanning data utilising different registration methods. [USQ Project]

Maunder, David (2007) An investigation into the establishment of a continuously operating GPS reference station at Dubbo City Council, Central West NSW. [USQ Project]

Wong Wan Sie, Winxie (2007) Analysis and design of curtain wall systems for high rise buildings. [USQ Project]

de Leeuw, Gert Johannes Schreuder (2007) Analysis of hydraulic transients in pipeline networks. [USQ Project]

Holzheimer, Carson Keith (2007) Automation of the rollingstock twist test. [USQ Project]

Harvey, Warren John (2007) Bridge approach guardrail prioritisation. [USQ Project]

Gallagher, Tony (2007) Clear zones in urban environments. [USQ Project]

H'ng, Po Lyn (2007) Comparative study of engineering leadership of senior engineers in Malaysia & Australia within the construction industry. [USQ Project]

Weis, Paul Raymond (2007) Cost effectiveness of street lighting. [USQ Project]

Walker, Bryan Patrick (2007) Cost-effective 3D modelling. [USQ Project]

Kleynhans, Claudius Justus (2007) Design and review of Millmerran coal handling plant. [USQ Project]

Weston, Bill Thomas (2007) Design and trial of an alternative option for suburban sewerage pump stations. [USQ Project]

Yok Meng, Tan (2007) Design of a microclimate ventilation system. [USQ Project]

Parkin, Damion Ian Harcourt (2007) Design of a rear suspension configuration for a live axle race car to achieve optimum handling characteristics. [USQ Project]

Hicks, Kevin Charles (2007) Design of aeration ploughing tool for poultry litter within shed to reduce odour generation. [USQ Project]

Stewart, Robert (2007) Design of electro-hydraulic controlled poppet valves. [USQ Project]

McKie, Scott (2007) Development of a portable high-wall lighting system. [USQ Project]

Birkbeck, A. (2007) Development of a remote laboratory system for external university students. [USQ Project]

Worrall, Andrew (2007) Development of quality assurance procedures for cadastral surveying using GPS technology. [USQ Project]

Jones, Bruce Thomas (2007) Dragline maintenance engineering. [USQ Project]

Bishop, Matthew Darrell (2007) Educational robot design. [USQ Project]

Mohr, Logan (2007) Effects and controls of lateral refraction in underground coal mines. [USQ Project]

McKay, Michael (2007) Electrical training package for mining area C. [USQ Project]

Sullivan, T. (2007) Embedded control system for biogas digesters. [USQ Project]

Schuh, Stephen Andrew (2007) Estimating rippability of Brisbane Tuff using quantitative and qualitative characteristics and a modified approach to an existing rippability rating method. [USQ Project]

Boitshoko, Daniel (2007) Extracting spatial information from aerial video imagery for monitoring riparian areas. [USQ Project]

Clarke, Lauren Elizabeth (2007) Factors in the selection of contractors for engineering works. [USQ Project]

Liyanawaduge, Nawanandana Chandrasiri (2007) GPS usage and infrastructure needs for machine guidance and control in the construction projects associated with QDMR. [USQ Project]

Coaker, Warren (2007) How engineers become CEOs - implications for education and training. [USQ Project]

Temple, Christopher Jed (2007) Impediments to identifying freehold land rights in N.S.W. [USQ Project]

Chow, Kai Wen (2007) Implications for engineers aspiring to become top-senior managers. [USQ Project]

Looi Zi Qing, Sean (2007) Improving the performance of an industrial cold room. [USQ Project]

Newman, Anthony (2007) Interactive map associated with tourism. [USQ Project]

Gustafson, Adrian Mark (2007) Investigation of a new generation degradable implant material. [USQ Project]

Martin, Christopher (2007) Ipswich City Council water supply infrastructure capacity high water usage and water meter accuracy. [USQ Project]

Muller, Ben (2007) Irrigation performance and water use efficiency of turf production. [USQ Project]

Ahmad, Abdul Hamid (2007) Life cycle assessment in semiconductor foundry. [USQ Project]

Ong, Chin How (2007) Life cycle assessment of cement in Malaysia. [USQ Project]

Wei, Lay Kian (2007) Life cycle assessment of CSR autoclaves lightweight concrete production in Malaysia. [USQ Project]

Booshand, Peter John (2007) Literature review of advanced research and innovation in the mining industry. [USQ Project]

Crowe, Daniel Leigh (2007) Management of physical assets at Purga Quarry. [USQ Project]

El Komy, Ahmed (2007) Millmerran Power Station ROM coal blockage removal system. [USQ Project]

Mitchell, Andrew (2007) On-line equipment condition monitoring based maintenance. [USQ Project]

Bollaart, Clement (2007) OPC cycle time analyser. [USQ Project]

Bichel, Daniel (2007) Optimisation of biodiesel stationary engine performance by modelling and simulating the running conditions. [USQ Project]

Chamberlain, Michael (2007) Optimisation of Gold Coast City’s chlorine dosing system for the southern region distribution network. [USQ Project]

Mackenzie, Matthew Robert (2007) PID controller optimisation using genetic algorithms. [USQ Project]

Saunders, Joseph Ian (2007) Porous weirs for flood mitigation. [USQ Project]

Lefhoko, Mmitsi (2007) Power station operations Millmerran power station feed water dissolved oxygen control. [USQ Project]

Breddin, Ian Stewart (2007) Property rights and the littoral zone in Queensland. [USQ Project]

Tan, Heng Tsin Stanley (2007) Recycling of used electronics in Singapore. [USQ Project]

Sullivan, Steven Michael (2007) Research, design and develop a pipe latching/unlatching device that can be used to help automate the pipe tripping process. [USQ Project]

MacMillan, Andrew Allan (2007) Respiration monitor and recording system. [USQ Project]

Steyn, Marius (2007) Review and redesign of Pilbara Iron 24MTA conveyor system. [USQ Project]

Lee, Wai Hung (2007) Shrinkage reduction of thermoset matrix particulate reinforced composites during hardening using low power microwave. [USQ Project]

Muir, Paul John (2007) Siphons as furrow irrigation measurement devices. [USQ Project]

Dunwoody, John Ernest (2007) Spatial analysis of woody vegetation land cover change in Crows Nest Shire, QLD. [USQ Project]

Bolitho, Gary (2007) TDR probes for the measurement of root zone soil moisture. [USQ Project]

Green, Christopher Ross (2007) Testing and analysis of fibre composite beams in a bridge structure. [USQ Project]

Weatherley, Mark Geoffrey (2007) The effect of compaction on the design life of rehabilitated insitu cement powder stabilised pavements. [USQ Project]

Mylne, George (2007) The effectiveness of a multiple-frequency global navigation satellite system (GNSS)on multipath mitigation. [USQ Project]

Hansen, Luke (2007) The use of waste cooking oil as an alternative fuel for the diesel engine. [USQ Project]

Dugdell, David Thomas (2007) Toowoomba road network review. [USQ Project]

O'Donnell, Clayton (2007) Total effect on the environment of electric/hybrid electric vehicle batteries. [USQ Project]

Kwok, Keen Whale (2007) Understanding progressive collapse and its effect to structural design. [USQ Project]

Davidson, Thomas Peter George (2007) Using tensile tests as benchmark, investigate the best percentage by weight of slg, as fillers, in Phenolic resins post-cured by microwaves. [USQ Project]

Heron, Katherine Margaret Monica (2007) Vortex shedding on bridge piers. [USQ Project]

Kang, Boon Geh (2007) Wall climbing robot. [USQ Project]

Johnston, George Finlay (2007) Wildlife vehicle collision GIS mapping & modelling. [USQ Project]

2006

Bavarin, Rudolph Edouard (2006) 50 kW eddy current brake. [USQ Project]

Rolph, David Gordon (2006) A comparison of DGPS correction sources in South Eastern Queensland. [USQ Project]

Nelson-White, Greg (2006) Abandoned shafts study (Charters Towers): a spatial solution. [USQ Project]

Reynolds, Jeremy (2006) Accuracy assessment of VRS in a dynamic environment. [USQ Project]

Hughes, Neil (2006) Accuracy of volumes from MX(moss) design software. [USQ Project]

Lister, Gregory (2006) Active vibration control. [USQ Project]

Charles, Andrew (2006) Ambient air temperature aeration controller. [USQ Project]

Hooper, James Andrew (2006) Analysis of catchment G in Oakey's sewer network. [USQ Project]

Worrall, Nofoaluma (2006) Analysis of providing affordable electricity supply for the outer islands in the Maldives. [USQ Project]

He, Mingqian Belinda (2006) Analysis of the recycling method for aluminum soda cans. [USQ Project]

Carter, Andrew William (2006) Application of geographical information system in underground coal mine to assist operational management. [USQ Project]

Hugo, Michael (2006) Automatic roller shell groover. [USQ Project]

Partridge, Toni Leigh (2006) Automation of a load-haul-dump (LHD) unit. [USQ Project]

Mokonopi, Kealeboga (2006) Balancing a two wheeled robot. [USQ Project]

Davey, Robert James (2006) Best percentage by weight of micro-spheres as fillers in phenolic resins, with fracture toughness as a benchmark. [USQ Project]

Gurney, Richard Noel (2006) Best percentage weight of microspheres as fillers in resin using three-point bending test. [USQ Project]

Armstead, Jared Kenneth (2006) Chassis development for the formula SAE racer. [USQ Project]

Treverrow, Daniel (2006) Comparison of injury criteria for human head impacts. [USQ Project]

Jacobs, Sunny (2006) Comparison of life cycle energy consumption of alternative irrigation systems. [USQ Project]

Napper, Bryce (2006) Computational fluid dynamics (CFD) investigation of the thermal efficiency of micro climate conditioning of a typical workstation. [USQ Project]

Lau, Chi Hing (2006) Construction technology for high rise buildings in Hong Kong. [USQ Project]

Fowler, Jason (2006) Cost effectiveness of suburban street lighting. [USQ Project]

Luke, Ricky (2006) Cost effectiveness of suburban street lighting. [USQ Project]

Millikan, Toby (2006) Current and future capacity of the Wirraglen Scout Reserve Wetlands to improve urban stormwater quality at Highfields. [USQ Project]

Lawless, Daniel Patrick (2006) Defining non-tidal riparian boundaries. [USQ Project]

Grassick, Bruce (2006) Design and construction of a solar collector for teaching purposes. [USQ Project]

Inderbitzin, Martin David (2006) Design review and analysis of Collinsville power station coal handling plant. [USQ Project]

Whittred, Daniel (2006) Developing a monitoring and control system for irrigation pumping units. [USQ Project]

Jiankulprasert, Manop (2006) Developing physical model for bearing capacity and flow net applications. [USQ Project]

Woods, Andrew (2006) Development and characterisation of an anechoic chamber. [USQ Project]

Hayllor, Nicholas (2006) Development of a low cost GPS guidance system for use in agriculture. [USQ Project]

Otto, Colin W. (2006) Development of a mobile vehicle classification system. [USQ Project]

Curtis, Benjamin Phillip (2006) Development of a noisy vehicle detection system. [USQ Project]

Sekhesa, Calvin Cally (2006) Development of a tool for estimating net emissions of greenhouse gases at farm and sub-catchment level. [USQ Project]

Gunton, Michael J. (2006) Development of an asset management strategy for the city of Mandurah WA. [USQ Project]

Cobb, Benjamin Jon (2006) Directional microphone array for security applications. [USQ Project]

Govender, Gansen (2006) Driver fatigue issues on State Highway 1 south of Whangarei - within region 1 of New Zealand. [USQ Project]

King, Joshua (2006) Dynamic tracking of a race car. [USQ Project]

Mustafa, Muhammad Zaki Bin (2006) E-tutorials for electrical engineering courses using Dreamweaver. [USQ Project]

Bartlett, Jeremy Adam (2006) Establishment of a priority infrastructure plan for the major road network in Laidley Shire. [USQ Project]

Shaw, Neil Geoffrey (2006) Evaluation of Ashtech ProMark2 survey system. [USQ Project]

McGuinness, Sean J. (2006) Evaluation of commercial EMF software. [USQ Project]

Tucker, Neil John (2006) Evaluation of the Queensland streets concept in residential streets in Logan City. [USQ Project]

Inglis, Rientz (2006) Evaluation of VRS-RTK GPS latency in a dynamic environment. [USQ Project]

Lee, Kuang Sheng (2006) Experimental study of the mechanical properties of particulate reinforced composite. [USQ Project]

Tinning, Eugene (2006) Field deployable shower unit by dual membrane filtration. [USQ Project]

Klein, Lindsay Edward (2006) Finite element analysis of a composite bridge deck. [USQ Project]

Eastaugh, Christopher S. (2006) Forest road decommissioning: modelling the effect on hydrological connectivity. [USQ Project]

Chan, Wooi Lieh (2006) Fracture analysis of vinyl ester composites cured under microwave conditions. [USQ Project]

Tierney, Daniel Robert (2006) Freight transport following an extreme rainfall event. [USQ Project]

Woo, Mun Kit (2006) Frequency synthesizer requirements for future cellular radio systems (06-026). [USQ Project]

McCosker, Daniel Patrick (2006) Guidelines for the use of electronic survey field notes and CAD computation files as legal records. [USQ Project]

Janusaitis, Stephen (2006) Impact response of flat and perforated plate. [USQ Project]

Ler, Eng Loo (2006) Intelligent building automation system. [USQ Project]

Geddes, Scott A. (2006) Internal model control (IMC) of a fruit drying system. [USQ Project]

Gianoulis, Cosmas (2006) Investigate the use of thermal protection for underground cables in Ergon Engery's electricity network. [USQ Project]

Seiler, Emile (2006) Investigating the economic viability and methods of harvesting and storing Leucaena. [USQ Project]

Sharp, Clayton Anthony (2006) Investigation of Toowoomba intersection crashes. [USQ Project]

Gray, Benjamin (2006) Issues with wireless 802.11 networks. [USQ Project]

Khan, Tawfiqul Hasan (2006) Iterative decoding for error resilient wireless data transmission. [USQ Project]

Mohan, Deepu (2006) Life cycle assessment of a SAW filter. [USQ Project]

Walker, Craig Louis (2006) Local and post-local buckling of steel tubes in thin-walled circular concrete-filed steel tubular columns. [USQ Project]

Leong, Suet-Leong (2006) Managing product development process for time market. [USQ Project]

Reynolds, Wade (2006) Mapping greens at City Golf Course. [USQ Project]

Lee, Boon Chong (2006) Measuring moisture content of biofilter media using capacitance. [USQ Project]

Free, Matthew (2006) Mobile manoeuvring robot. [USQ Project]

Stark, Kevin (2006) Modular robot communication interface. [USQ Project]

Cameron, Justin (2006) Next-generation 3D graphics engine design. [USQ Project]

Fritsch, Mark Timothy (2006) Non-trible GPS receivers and virtual reference stations (VRS). [USQ Project]

Tuxford, Andrew (2006) Numerical analysis of a closed face impeller. [USQ Project]

Rafiei, Ramin (2006) Optimisation of low-cost astronomical site testing techniques. [USQ Project]

Rae, Andrew Stewart (2006) Performance and stability analysis of an AC variable speed drive. [USQ Project]

Mohutsiwa, Donald A. (2006) PID tuning controller using internal model control method. [USQ Project]

Gall, Daniel (2006) Pitch control module microprocessor upgrade modification raytheon beechcraft bonanza A36. [USQ Project]

Ang, Soon Lim (2006) Predicting the crushing stress of composite materials. [USQ Project]

Allen, Glen Keith (2006) Problems of stone mastic asphalt use in north Queensland. [USQ Project]

Lian, Chua Poh (2006) Production operation system - key performance indicator. [USQ Project]

Brandon, Paul (2006) Quality assurance. [USQ Project]

Beer, Craig (2006) Quality assurance system in a small surveying firm. [USQ Project]

Lee, Chin Fung (2006) Quality review of unit technical logistic and maintenance processes. [USQ Project]

Pilane, Tshepo Skuuman (2006) Recycling consumer electrical and electronic equipment. [USQ Project]

Kamaruddin, Kamarul Faisal (2006) Security performance of a wireless LAN testbed. [USQ Project]

Scobie, Michael (2006) Sensitivity of capacitance probes to soil cracks. [USQ Project]

Dunbar, Barry (2006) Software simulator development for orthogonal frequency division multiplexing (OFDM) modulation. [USQ Project]

Watts, David Michael Graeme (2006) Speaker identification - prototype development and performance. [USQ Project]

Freeman, Barry (2006) Steering system and suspension design for a formula SAE-A racer. [USQ Project]

Morris, Anthony Brian (2006) Stormwater harvest and reuse for a wholesale nursery. [USQ Project]

Bolger, Paul (2006) Strengthening of headstocks with vertical clamping to enhance shear capacity. [USQ Project]

Gribble, Brett (2006) Stress relieving furnace modelling and analysis. [USQ Project]

Smith, Barton James (2006) System design for formula SAE-A racecar. [USQ Project]

McCarthy, Alison ORCID: https://orcid.org/0000-0003-4595-6447 (2006) Telemetry and communication systems for irrigation management. [USQ Project]

Bryde, Andrew Robert (2006) Terrestrial photo modelling. [USQ Project]

Harch, Nelson (2006) Testing mapping grade GPS carrier phase accuracy. [USQ Project]

Neubauer, Aaron John (2006) Testing of current flooring systems and materials. [USQ Project]

Kruger, Scott (2006) The design and optimisation of a prototype sailplane. [USQ Project]

Breust, Tristan David (2006) The design and structural analysis of a steel portal framed shed for the Darling Downs Historical Rail Society. [USQ Project]

Clarke, Daniel John (2006) The design of a three point linkage implement height control system. [USQ Project]

Massaro, Aaron (2006) The effect of water ratio on the mechanical properties of refactory materials. [USQ Project]

Holloway, Stephen John (2006) The effect of wide open bays on legal boundaries. [USQ Project]

Chan, Auc Fai (2006) The finite difference time domain method for computational electromagnetics. [USQ Project]

Chiu, Kwong Man Karen (2006) The use of recycled concrete aggregate in structural concrete around South East Queensland. [USQ Project]

Pejakovic, Derek (2006) Theatre booking system. [USQ Project]

Johnston, Kristine Leigh (2006) Treatment of mine water with colloidal suspensions. [USQ Project]

Kronk, Matthew Neil (2006) Ultimate strength of steel-concrete composite beams under combined bending and torsion. [USQ Project]

Figg, Matthew Lorne (2006) Using renewable plantation timber as a replacement option for unrenewable hardwood girders in bridges. [USQ Project]

Vella, Anthony (2006) Ventilation of highwall mining to control methane concentration at the Moura Mine. [USQ Project]

Stoeckl, Wayne Edmund (2006) Viability of a coordinated cadastre in New South Wales. [USQ Project]

Wallace, Darren James (2006) Water and wastewater strategic township plan Warragul, Victoria. [USQ Project]

Chan, Siew-Yuen (2006) Water leakage detection circuit in external chiller unit. [USQ Project]

Downey, Kym Therese (2006) Weather induced changes on domestic water consumption. [USQ Project]

2005

Thompson, Dean (2005) A four quadrant adjustable speed drive for series wound DC motors. [USQ Project]

Trent, Stephen Wade (2005) A habitat suitability index model for the trapdoor spider species, 'Arbanitis variabilis'. [USQ Project]

Tanoi, Levei (2005) A model to establish a global navigation satellite system (GNSS) testing and validation center at the University of Southern Queensland. [USQ Project]

Rizzo Naudi, Antonello (2005) A quality assurance system at the Land Survey and Mapping Unit (Malta). [USQ Project]

Lee, Chang Long (2005) A study and evaluation on Seri Wawasan bridge in Putrajaya, Malaysia. [USQ Project]

Kannapiran, Ram Kumar M. (2005) A study and evaluation on SMART Project, Malaysia. [USQ Project]

Leow, Jia Hui (2005) A study of building foundations in Malaysia. [USQ Project]