Browse by Format Type

'Online learning environment' using ASP.NET

Vriesema, Timothy Ross (2004) 'Online learning environment' using ASP.NET. [USQ Project]

2+1 Rural Highway Treatments in Queensland, Australia

Bartolo, Jack (2017) 2+1 Rural Highway Treatments in Queensland, Australia. [USQ Project]

3D Terrestrial laser scanning for application in earthwork and topographical surveys

Heng, Fook Hai (2008) 3D Terrestrial laser scanning for application in earthwork and topographical surveys. [USQ Project]

3D fluid modelling of the O.O. Madsen Bridge during flood

Knipe, Russell Alexander (2014) 3D fluid modelling of the O.O. Madsen Bridge during flood. [USQ Project]

3D hydrologic features mapping with imaging rover

Pettersson, Declan (2016) 3D hydrologic features mapping with imaging rover. [USQ Project]

3D modelling for surveying projects using unmanned arial vehicles (UAVs) and laser scanning

Redding, Bradley (2016) 3D modelling for surveying projects using unmanned arial vehicles (UAVs) and laser scanning. [USQ Project]

3D terrain visualisation and virtual fly-through for tourism conservation using Geographic Information Systems (GIS)

Knox, Donna (2004) 3D terrain visualisation and virtual fly-through for tourism conservation using Geographic Information Systems (GIS). [USQ Project]

50 kW eddy current brake

Bavarin, Rudolph Edouard (2006) 50 kW eddy current brake. [USQ Project]

A Case Study in Failure Analysis and Material Selection of Corrosion Under Insulation (CUI) of Piping Components in Oil and Gas

Cale, Florentino (2021) A Case Study in Failure Analysis and Material Selection of Corrosion Under Insulation (CUI) of Piping Components in Oil and Gas. [USQ Project]

A Comparative Study of and Modern Techniques for Accurate Internal Space Measurements

Barre, Christopher (2018) A Comparative Study of and Modern Techniques for Accurate Internal Space Measurements. [USQ Project]

A Comparative Study on UAV Photogrammetry

Hager, Marcus Timothy (2017) A Comparative Study on UAV Photogrammetry. [USQ Project]

A Comparison Analysis into Flange Survey Techniques

Lee, Greg (2019) A Comparison Analysis into Flange Survey Techniques. [USQ Project]

A Cost Benefit Analysis of Vertical Measurement Tools for Differential Levelling

Champion, Scott (2017) A Cost Benefit Analysis of Vertical Measurement Tools for Differential Levelling. [USQ Project]

A Distributed Sensor Array for Rapid and Low Cost Oceanic Air Crash Localisation

Welsby, Trevor (2017) A Distributed Sensor Array for Rapid and Low Cost Oceanic Air Crash Localisation. [USQ Project]

A MATLAB-based framework for engineering design evaluation via virtual prototyping

Bernardel, George (2004) A MATLAB-based framework for engineering design evaluation via virtual prototyping. [USQ Project]

A New Supplementary Binder in Foamed Bitumen Stabilisation

Coonan, Tom (2022) A New Supplementary Binder in Foamed Bitumen Stabilisation. [USQ Project]

A Qualitative Assessment of Close Range Photogrammetry for use in measuring Stratas/Stratums

Wahbe, Martin (2017) A Qualitative Assessment of Close Range Photogrammetry for use in measuring Stratas/Stratums. [USQ Project]

A Reliability Centered Maintenance program incorporating probabilistic based simulation

Mylrea, Cliff (2020) A Reliability Centered Maintenance program incorporating probabilistic based simulation. [USQ Project]

A Review of a cadastral boundary adjustment software program

Mayo, Benjamin Marc (2008) A Review of a cadastral boundary adjustment software program. [USQ Project]

A Simulation Study on Bamboo Fiber Based Composite Bricks

Amerri, Ali (2021) A Simulation Study on Bamboo Fiber Based Composite Bricks. [USQ Project]

A Study on the Effect of External Parameters on Expansive Soils

Flood, Zack (2018) A Study on the Effect of External Parameters on Expansive Soils. [USQ Project]

A Sustainable Approach to Single Lot Residential Stormwater Disposal

Robertson, Alister (2018) A Sustainable Approach to Single Lot Residential Stormwater Disposal. [USQ Project]

A Sustainable Focus on Rural Town Main Streets & Highway Initiatives

Minchev, Grant (2018) A Sustainable Focus on Rural Town Main Streets & Highway Initiatives. [USQ Project]

A Sweet Use of Adversity – National Servicemen in Vietnam

Whittaker, Bob (2023) A Sweet Use of Adversity – National Servicemen in Vietnam. [USQ Project]

A Verification of AprilTags for a Pharmacy Application

Moore, Cassandra (2020) A Verification of AprilTags for a Pharmacy Application. [USQ Project]

A Water Sensitive Urban Design approach to mitigate the effects of Rainfall Derived Infiltration and inflow on existing sewerage systems

Coogan, Tim (2022) A Water Sensitive Urban Design approach to mitigate the effects of Rainfall Derived Infiltration and inflow on existing sewerage systems. [USQ Project]

A biomechanical analysis for improved ergonomics in metal detector products using trajectory optimisation

Smith, B. (2010) A biomechanical analysis for improved ergonomics in metal detector products using trajectory optimisation. [USQ Project]

A case study approach to modular housing design & manufacturing systems

Jurman, Shaun (2018) A case study approach to modular housing design & manufacturing systems. [USQ Project]

A civil engineering feasibility study on a sustainable pumped hydroelectricity plant at Wivenhoe

Davis, Aaron (2016) A civil engineering feasibility study on a sustainable pumped hydroelectricity plant at Wivenhoe. [USQ Project]

A comparative review of attributes of engineers in senior management roles

Price, Daniel (2007) A comparative review of attributes of engineers in senior management roles. [USQ Project]

A comparative study of using an Unmanned Aerial Vehicle (UAV) in surveying projects

Davison, Andrew (2017) A comparative study of using an Unmanned Aerial Vehicle (UAV) in surveying projects. [USQ Project]

A comparative study on determining primary and secondary stress levels in boiler valve bodies between FEA simulations, RemLife, and the ASME BPVC Section III Division I NB approach

Remington, Callum (2021) A comparative study on determining primary and secondary stress levels in boiler valve bodies between FEA simulations, RemLife, and the ASME BPVC Section III Division I NB approach. [USQ Project]

A comparison of 'AS/NZS 1170.2:2011 Wind Actions' and structural analysis software packages for design of structures

Stanford, Rawdon (2020) A comparison of 'AS/NZS 1170.2:2011 Wind Actions' and structural analysis software packages for design of structures. [USQ Project]

A comparison of AUSGeoid09 and AUSGeoid98 in the Hawkesbury Valley

Marion, Michael (2011) A comparison of AUSGeoid09 and AUSGeoid98 in the Hawkesbury Valley. [USQ Project]

A comparison of DGPS correction sources in South Eastern Queensland

Rolph, David Gordon (2006) A comparison of DGPS correction sources in South Eastern Queensland. [USQ Project]

A comparison of depth sounder positioning techniques for hydrographic/bathymetric surveys

Strahley, Matthew (2011) A comparison of depth sounder positioning techniques for hydrographic/bathymetric surveys. [USQ Project]

A comparison of mobile phone 3D images and total station data for spatial interpretation of structures

Dark, Michael (2017) A comparison of mobile phone 3D images and total station data for spatial interpretation of structures. [USQ Project]

A comparison of remotely sensed terrestrial spatial information

Dorahy, Will Paul (2008) A comparison of remotely sensed terrestrial spatial information. [USQ Project]

A comparison of the limitations and accuracy of both obstructed prism and obstructed non-prism measurements

Hooson, Mitchell D (2015) A comparison of the limitations and accuracy of both obstructed prism and obstructed non-prism measurements. [USQ Project]

A comprehensive study of footing on c-φ soil slopes - numerical and physical modelling

Cole, Andrew James Shorten (2009) A comprehensive study of footing on c-φ soil slopes - numerical and physical modelling. [USQ Project]

A consistent approach to headlight screens in NSW

Bowles, Yvonne Elizabeth (2013) A consistent approach to headlight screens in NSW. [USQ Project]

A cost benefit analysis of rural residential water supply – constant flow vs. full pressure

Dakers, Nicole (2009) A cost benefit analysis of rural residential water supply – constant flow vs. full pressure. [USQ Project]

A criteria based approach to unmanned aerial vehicle regulations

McTegg, Stephen (2019) A criteria based approach to unmanned aerial vehicle regulations. [USQ Project]

A four quadrant adjustable speed drive for series wound DC motors

Thompson, Dean (2005) A four quadrant adjustable speed drive for series wound DC motors. [USQ Project]

A habitat suitability index model for the trapdoor spider species, 'Arbanitis variabilis'

Trent, Stephen Wade (2005) A habitat suitability index model for the trapdoor spider species, 'Arbanitis variabilis'. [USQ Project]

A laboratory experiment based on the ‘Segway’

Motswagae, Tshepo (2011) A laboratory experiment based on the ‘Segway’. [USQ Project]

A model to establish a global navigation satellite system (GNSS) testing and validation center at the University of Southern Queensland

Tanoi, Levei (2005) A model to establish a global navigation satellite system (GNSS) testing and validation center at the University of Southern Queensland. [USQ Project]

A new internal combustion engine configuration - opposed piston with crank offset

Malpress, Ray (2007) A new internal combustion engine configuration - opposed piston with crank offset. [USQ Project]

A numerical investigation into sinkhole formation

Keightley, Anthony J (2016) A numerical investigation into sinkhole formation. [USQ Project]

A practical comparison of VISSIM and SIDRA for the assessment of development impacts

Fichera, Anthony (2011) A practical comparison of VISSIM and SIDRA for the assessment of development impacts. [USQ Project]

A predictive tool for water utilities to gauge electricity expenditure in a dynamic energy market

Kirkpatrick, Gail (2018) A predictive tool for water utilities to gauge electricity expenditure in a dynamic energy market. [USQ Project]

A preliminary analysis of the effectiveness of the new QLD GDL program

Randall, Neil William (2011) A preliminary analysis of the effectiveness of the new QLD GDL program. [USQ Project]

A preliminary feasibility study for transporting Surat Basin export coal using Maglev technology

Freeman, Bryan (2013) A preliminary feasibility study for transporting Surat Basin export coal using Maglev technology. [USQ Project]

A quality assurance system at the Land Survey and Mapping Unit (Malta)

Rizzo Naudi, Antonello (2005) A quality assurance system at the Land Survey and Mapping Unit (Malta). [USQ Project]

A review and update of the supply chain documentation within Amcor Flexibles

Reinbott, Nigel (2009) A review and update of the supply chain documentation within Amcor Flexibles. [USQ Project]

A review of smoke dispersion models for smoke pollution hazard mitigation associated with controlled, forest fuel reduction burns

Batstone, Seamus (2021) A review of smoke dispersion models for smoke pollution hazard mitigation associated with controlled, forest fuel reduction burns. [USQ Project]

A review of the application of adverse possession within the Torrens system of land regulation in Australia

Mulliss, Michael Stephen (2009) A review of the application of adverse possession within the Torrens system of land regulation in Australia. [USQ Project]

A review of warrants for traffic barriers in divided carriageway medians

Nash, Lachlan (2015) A review of warrants for traffic barriers in divided carriageway medians. [USQ Project]

A review on Australian mine haul road design procedures

Strack, Anita Leigh (2015) A review on Australian mine haul road design procedures. [USQ Project]

A study and evaluation on SMART Project, Malaysia

Kannapiran, Ram Kumar M. (2005) A study and evaluation on SMART Project, Malaysia. [USQ Project]

A study and evaluation on Seri Wawasan bridge in Putrajaya, Malaysia

Lee, Chang Long (2005) A study and evaluation on Seri Wawasan bridge in Putrajaya, Malaysia. [USQ Project]

A study into the behaviour of FRP bolted connections

Robinson, Adam (2015) A study into the behaviour of FRP bolted connections. [USQ Project]

A study of building foundations in Malaysia

Leow, Jia Hui (2005) A study of building foundations in Malaysia. [USQ Project]

A study of pavement performance on the Gatton Bypass Duplication

O'May, David Victor (2007) A study of pavement performance on the Gatton Bypass Duplication. [USQ Project]

A study of the accuracy of oblique image capture in UAV Photogrammetry

Roberts, Andrew (2018) A study of the accuracy of oblique image capture in UAV Photogrammetry. [USQ Project]

A study of the ground and vegetation effects on the propagation of road traffic noise in south east Queensland

Grant, Robert Kenneth (2005) A study of the ground and vegetation effects on the propagation of road traffic noise in south east Queensland. [USQ Project]

A study on concrete faced rockfill dams

Lau, Chau Chin (2004) A study on concrete faced rockfill dams. [USQ Project]

A study on formability issues in advanced high strength steel

Cook, Matthew Peter (2018) A study on formability issues in advanced high strength steel. [USQ Project]

A test facility for assessing the performance of IEC61850 substation automation designs

Hogan, Matthew Julian (2014) A test facility for assessing the performance of IEC61850 substation automation designs. [USQ Project]

A touch-screen controlled 'Linear Predictive Synthesizer' for accessibility applications

Jordan, Benjamin W. D. (2009) A touch-screen controlled 'Linear Predictive Synthesizer' for accessibility applications. [USQ Project]

A trade-based approach for defects management in residential construction

Dhakal, Bibek (2016) A trade-based approach for defects management in residential construction. [USQ Project]

A two-dimensional analysis of the bearing capacity of footings near slopes

Arnold, Matthew David (2008) A two-dimensional analysis of the bearing capacity of footings near slopes. [USQ Project]

A validation of the model for effluent disposal using land irrigation (MEDLI)

Lowry, Mark (2016) A validation of the model for effluent disposal using land irrigation (MEDLI). [USQ Project]

A.R Drone vision-guided searching

Long, Derek ORCID: https://orcid.org/0000-0001-9414-5064 (2013) A.R Drone vision-guided searching. [USQ Project]

AC Chopper Series Voltage Reg Applications

Kereczko, John (2018) AC Chopper Series Voltage Reg Applications. [USQ Project]

AUSGeoid09 performance in mountainous regions

Sussanna, Vittorio (2013) AUSGeoid09 performance in mountainous regions. [USQ Project]

Abandoned shafts study (Charters Towers): a spatial solution

Nelson-White, Greg (2006) Abandoned shafts study (Charters Towers): a spatial solution. [USQ Project]

Accounting for Climate Variability in the Design of Rain-fed Water Supply Systems in Papua New Guinea

Bill, Nana (2017) Accounting for Climate Variability in the Design of Rain-fed Water Supply Systems in Papua New Guinea. [USQ Project]

Accuracy Assessment of the Riegl VMQ-­‐1HA Mobile Laser Scanner

Sharkey, Luke (2019) Accuracy Assessment of the Riegl VMQ-­‐1HA Mobile Laser Scanner. [USQ Project]

Accuracy assessment of 3D laser scanning data utilising different registration methods

Sinderberry, Mark (2007) Accuracy assessment of 3D laser scanning data utilising different registration methods. [USQ Project]

Accuracy assessment of VRS in a dynamic environment

Reynolds, Jeremy (2006) Accuracy assessment of VRS in a dynamic environment. [USQ Project]

Accuracy evaluation of 3-D laser imaging scans

Stephens, James Finlay (2004) Accuracy evaluation of 3-D laser imaging scans. [USQ Project]

Accuracy of a machine guided grader

Bell, Mitchell (2013) Accuracy of a machine guided grader. [USQ Project]

Accuracy of volumes from MX(moss) design software

Hughes, Neil (2006) Accuracy of volumes from MX(moss) design software. [USQ Project]

Accurate 3-D Modelling from DSLR Images for Residential Design Purposes

Burgess, Liam P. (2018) Accurate 3-D Modelling from DSLR Images for Residential Design Purposes. [USQ Project]

Achieving effective control of deaeration chemical dosing using artificial neural networks

McCairns, Michael (2018) Achieving effective control of deaeration chemical dosing using artificial neural networks. [USQ Project]

Acoustic measurement methods in forced flow vortex dispersion within a paint manufacturing process

Witton, Caleb (2020) Acoustic measurement methods in forced flow vortex dispersion within a paint manufacturing process. [USQ Project]

Active vibration control

Lister, Gregory (2006) Active vibration control. [USQ Project]

Adaptive Markov decision control of high-frequency drip irrigation systems

Peckett, Damian (2013) Adaptive Markov decision control of high-frequency drip irrigation systems. [USQ Project]

Adhesive wear and frictional behaviour of glass fibre reinforced thermoset composites

Mehoub, Gabrel (2013) Adhesive wear and frictional behaviour of glass fibre reinforced thermoset composites. [USQ Project]

Adhesive wear of rubber in mining application under dry contact condition

Almuhaini, Hamad (2019) Adhesive wear of rubber in mining application under dry contact condition. [USQ Project]

Advance rate measurement for furrow irrigation

McCarthy, Cheryl ORCID: https://orcid.org/0000-0003-3297-7425 (2004) Advance rate measurement for furrow irrigation. [USQ Project]

Advanced Process Control Applications in Complex Industrial Processes

Reitano, Kieran (2021) Advanced Process Control Applications in Complex Industrial Processes. [USQ Project]

Advanced analysis of shallow foundations located near slopes

Peters, Renee (2011) Advanced analysis of shallow foundations located near slopes. [USQ Project]

Advanced wastewater treatment systems

Coppen, John (2004) Advanced wastewater treatment systems. [USQ Project]

Advantages and practicality of using a 2D hydrodynamic model in comparison to a 1D hydrodynamic model in a flood prone area

Cox, Jeremy Neil (2010) Advantages and practicality of using a 2D hydrodynamic model in comparison to a 1D hydrodynamic model in a flood prone area. [USQ Project]

Air flow through two layered mesh at varying porosity and spacing

Padda, Ranjit Singh (2008) Air flow through two layered mesh at varying porosity and spacing. [USQ Project]

Air particle monitoring using image processing

Sana, Newman (2013) Air particle monitoring using image processing. [USQ Project]

Airborne Observation Controller

Schuster, Robert (2022) Airborne Observation Controller. [USQ Project]

Airframe development and flight testing for entry into the 2009 Outback Challenge

Milne, G. (2009) Airframe development and flight testing for entry into the 2009 Outback Challenge. [USQ Project]

Albury Wodonga Bus Network Assessment Model

Quinlivan, Patrick (2021) Albury Wodonga Bus Network Assessment Model. [USQ Project]

Alkali-silica reaction in concrete bridge piles: strengthening with fibre-reinforced polymers

Knight, Tracey Anne (2014) Alkali-silica reaction in concrete bridge piles: strengthening with fibre-reinforced polymers. [USQ Project]

Alkali-silica reaction in concrete bridge piles: treatment and strengthening with fibre-reinforced polymers

Knight, Tracey Anne (2014) Alkali-silica reaction in concrete bridge piles: treatment and strengthening with fibre-reinforced polymers. [USQ Project]

Alluvial Geology of North-West Sydney and its Impact on Development

Somerville, Jarrod (2021) Alluvial Geology of North-West Sydney and its Impact on Development. [USQ Project]

Alternate pavement types on reactive soils in the Ipswich Council area

Crone, Jeffrey John (2009) Alternate pavement types on reactive soils in the Ipswich Council area. [USQ Project]

Alternatives to SF6 in HV circuit breaker insulation

Marland, Michael (2014) Alternatives to SF6 in HV circuit breaker insulation. [USQ Project]

Alternator interrupting circuit for improving fuel economy

Rendle-Short, Kendric (2016) Alternator interrupting circuit for improving fuel economy. [USQ Project]

Ambient air temperature aeration controller

Charles, Andrew (2006) Ambient air temperature aeration controller. [USQ Project]

An Accessibility Investigation of the Gold Coast Light Rail System

Van Bael, Tammee (2017) An Accessibility Investigation of the Gold Coast Light Rail System. [USQ Project]

An Accuracy Comparison between GPS Surveying and UAV Surveying on Seawall Monitoring

Bartlett, Luke (2017) An Accuracy Comparison between GPS Surveying and UAV Surveying on Seawall Monitoring. [USQ Project]

An Analysis of Thermal Storage of Solar Energy

Conway, Benjamin (2018) An Analysis of Thermal Storage of Solar Energy. [USQ Project]

An Analysis on the Effect of Free Station Traversing on the Uncertainties Associated with Control Points, in both an Open and a Closed Traverse

Cook, Alex (2018) An Analysis on the Effect of Free Station Traversing on the Uncertainties Associated with Control Points, in both an Open and a Closed Traverse. [USQ Project]

An Assessment of Elsholz Redirective Concrete Kerb on Road Safety

Steel, Simon (2018) An Assessment of Elsholz Redirective Concrete Kerb on Road Safety. [USQ Project]

An Instrumented Approach to the Classification of Alcoholic Beverages: Combining PTR-ToF Mass Spectrometry, with Machine Learning

Herbert, James Feleciano (2018) An Instrumented Approach to the Classification of Alcoholic Beverages: Combining PTR-ToF Mass Spectrometry, with Machine Learning. [USQ Project]

An Investigation Aimed at Improving Subsidence Monitoring by Combining LiDAR with Traditional Survey Methodologies

Ogilvie, Heath Stewart (2018) An Investigation Aimed at Improving Subsidence Monitoring by Combining LiDAR with Traditional Survey Methodologies. [USQ Project]

An Investigation into design and construction of a leachate dam in Lismore

George, Phillip (2021) An Investigation into design and construction of a leachate dam in Lismore. [USQ Project]

An Investigation into harvesting electrical energy from plants through the Rhizo-deposition process in Australian environmental and climatic conditions

Miles, Stuart (2017) An Investigation into harvesting electrical energy from plants through the Rhizo-deposition process in Australian environmental and climatic conditions. [USQ Project]

An Investigation into the testing and commissioning requirements of IEC 61850 Station Bus Substations

Accendere, Robert Peter (2015) An Investigation into the testing and commissioning requirements of IEC 61850 Station Bus Substations. [USQ Project]

An Investigation into the use of a RTK GNSS and a Digital Depth Sounder for Mapping a Tidal River Bed

Pinkstone, Jared William (2017) An Investigation into the use of a RTK GNSS and a Digital Depth Sounder for Mapping a Tidal River Bed. [USQ Project]

An Objective Criteria for the Determination of Non-Tidal Riparian Boundaries in NSW

Smith, Lachlan (2018) An Objective Criteria for the Determination of Non-Tidal Riparian Boundaries in NSW. [USQ Project]

An analysis of human behaviour which can cause fatalities in the bus and train tunnel during a tunnel fire event

Boully, Jacinda (2014) An analysis of human behaviour which can cause fatalities in the bus and train tunnel during a tunnel fire event. [USQ Project]

An analysis of kinetic energy recovery systems and their potential for contemporary internal combustion engine powered vehicles

Carlin, Steven (2015) An analysis of kinetic energy recovery systems and their potential for contemporary internal combustion engine powered vehicles. [USQ Project]

An analysis of roadbase materials used in foamed bitumen stabilisation

O'Callaghan, Adam (2014) An analysis of roadbase materials used in foamed bitumen stabilisation. [USQ Project]

An assessment of durability and mechanical properties of post-consumer polypropylene fibre reinforced concrete

Hundloe, Kyle (2020) An assessment of durability and mechanical properties of post-consumer polypropylene fibre reinforced concrete. [USQ Project]

An assessment of rural road network resilience as a critical infrastructure for coal seam gas development in regional Queensland

Fitzgerald, Samuel Jesse (2015) An assessment of rural road network resilience as a critical infrastructure for coal seam gas development in regional Queensland. [USQ Project]

An assessment of the deceleration on horizontal curve component of the Austroads operating speed estimation model

Noon, Jarred (2016) An assessment of the deceleration on horizontal curve component of the Austroads operating speed estimation model. [USQ Project]

An autonomous bird deterrent system

Clarke, Timothy Lewis (2004) An autonomous bird deterrent system. [USQ Project]

An energy and carbon audit of Mornington Peninsula Shire Council

Baxter, Melissa Hope (2014) An energy and carbon audit of Mornington Peninsula Shire Council. [USQ Project]

An evaluation of the performance of two different global satellite navigation systems, Trimble’s CenterPoint RTX and a conventional network RTK system

Boylan, Richard (2016) An evaluation of the performance of two different global satellite navigation systems, Trimble’s CenterPoint RTX and a conventional network RTK system. [USQ Project]

An evaluation of traffic calming devices for major highways passing through rural Australian communities

Paul, Gregory (2015) An evaluation of traffic calming devices for major highways passing through rural Australian communities. [USQ Project]

An experimental and theoretical investigation of side weirs

Rowlings, David Selwyn (2010) An experimental and theoretical investigation of side weirs. [USQ Project]

An inexpensive hardware-based identification system for improved computer security

Quarisa, Matthew (2005) An inexpensive hardware-based identification system for improved computer security. [USQ Project]

An innovative intelligent system for child care & safety applications using ZigBee Wireless Sensing Networks

Goold, Bradley (2014) An innovative intelligent system for child care & safety applications using ZigBee Wireless Sensing Networks. [USQ Project]

An integrated “Mine to Mill” automation methodology applied to Sanbrado

Jennings, Clinton (2022) An integrated “Mine to Mill” automation methodology applied to Sanbrado. [USQ Project]

An intelligent vision system for wildlife monitoring

Fagg, Ashton (2012) An intelligent vision system for wildlife monitoring. [USQ Project]

An internet based SCADA system

Lynch, Jason Michael (2005) An internet based SCADA system. [USQ Project]

An investigation and quantitative analysis of the impacts on stream flow and fluvial erosion associated with urbanisation of a small catchment

Skipworth, Julian (2010) An investigation and quantitative analysis of the impacts on stream flow and fluvial erosion associated with urbanisation of a small catchment. [USQ Project]

An investigation into LandXML for implementation of 3D Cadastre in eSurvey

Hancock, Robert John (2015) An investigation into LandXML for implementation of 3D Cadastre in eSurvey. [USQ Project]

An investigation into an alternative on-site stormwater detention structure to increase capacity and reduce spatial footprint and economic impact

Scott, Cameron (2018) An investigation into an alternative on-site stormwater detention structure to increase capacity and reduce spatial footprint and economic impact. [USQ Project]

An investigation into increasing the fatigue life of an electric shovel dipper handle

van Rensburg, Henriette Janse (2017) An investigation into increasing the fatigue life of an electric shovel dipper handle. [USQ Project]

An investigation into the Australian height datum on Ballina Island

Stanley, Matthew (2010) An investigation into the Australian height datum on Ballina Island. [USQ Project]

An investigation into the Victorian permanent survey mark infrastructure

Brice, Joshua (2009) An investigation into the Victorian permanent survey mark infrastructure. [USQ Project]

An investigation into the accuracies and limitations of different methods of connecting to datum

Archbold, Scott (2016) An investigation into the accuracies and limitations of different methods of connecting to datum. [USQ Project]

An investigation into the accuracy and limitations of automatic target recognition in total stations

Weyman-Jones, Ashley (2010) An investigation into the accuracy and limitations of automatic target recognition in total stations. [USQ Project]

An investigation into the establishment of a continuously operating GPS reference station at Dubbo City Council, Central West NSW

Maunder, David (2007) An investigation into the establishment of a continuously operating GPS reference station at Dubbo City Council, Central West NSW. [USQ Project]

An investigation into the feasibility of micro scale pyrolysis powered by renewable energy

Buckley, Paul (2019) An investigation into the feasibility of micro scale pyrolysis powered by renewable energy. [USQ Project]

An investigation into the legislative changes affecting tidal boundaries in Queensland

Madden-Holmes, Ben (2010) An investigation into the legislative changes affecting tidal boundaries in Queensland. [USQ Project]

An investigation into the parameters that affect the swell factor used in volume and design calculations at Callide open cut coal mine

Heit, Andrew (2011) An investigation into the parameters that affect the swell factor used in volume and design calculations at Callide open cut coal mine. [USQ Project]

An investigation into the potential benefit/value of Ipswich CBD residential revitalisation

King, Matthew (2016) An investigation into the potential benefit/value of Ipswich CBD residential revitalisation. [USQ Project]

An investigation into the reduction of ongoing maintenance costs by sealing fullwidth on two-way, rural roads

Robertson, Samuel (2019) An investigation into the reduction of ongoing maintenance costs by sealing fullwidth on two-way, rural roads. [USQ Project]

An investigation into the suitability Of volunteered information to create a flood extent map

Temple-Watts, Philip (2011) An investigation into the suitability Of volunteered information to create a flood extent map. [USQ Project]

An investigation of aluminium/eproxy particulate composite system - impact/long-term behavior

Assiriyage, Buddhi Nuwan Lanka (2010) An investigation of aluminium/eproxy particulate composite system - impact/long-term behavior. [USQ Project]

An investigation of land and property information (NSW) proposed E-Plan process of digital survey plan lodgement in LandXML format

Wady, Vaughan (2009) An investigation of land and property information (NSW) proposed E-Plan process of digital survey plan lodgement in LandXML format. [USQ Project]

An investigation of roles and development pattern of regional airports, Queensland Australia

Shaw, Mark Andrew (2010) An investigation of roles and development pattern of regional airports, Queensland Australia. [USQ Project]

An investigation of small-scale wave energy converters for marine sensors

Courtis, Peter (2020) An investigation of small-scale wave energy converters for marine sensors. [USQ Project]

An investigation of the key barriers preventing development of Small Medium Enterprises (SMEs) in the South African construction industry

Mbambe, Putumani (2020) An investigation of the key barriers preventing development of Small Medium Enterprises (SMEs) in the South African construction industry. [USQ Project]

An investigation of the predictive accuracy of salinity forecast using the source IMS for the Murray-Darling river

Mccullagh, Harry James (2016) An investigation of the predictive accuracy of salinity forecast using the source IMS for the Murray-Darling river. [USQ Project]

An investigation on the high water mark as a land boundary

Klibbe, Christopher Aaron (2010) An investigation on the high water mark as a land boundary. [USQ Project]

An investigative study of road construction contract variations

Purvis, Alan (2015) An investigative study of road construction contract variations. [USQ Project]

Analyse original marks and occupation used to reinstate boundaries for identification surveys

Goodwin, Brent (2009) Analyse original marks and occupation used to reinstate boundaries for identification surveys. [USQ Project]

Analysing geotechnical aspects of concrete pipe culverts

Porter, Simon (2015) Analysing geotechnical aspects of concrete pipe culverts. [USQ Project]

Analysing the effect of speed variation on irrigation efficiency in travelling irrigators

Campbell, Nicholas (2005) Analysing the effect of speed variation on irrigation efficiency in travelling irrigators. [USQ Project]

Analysis and design of curtain wall systems for high rise buildings

Wong Wan Sie, Winxie (2007) Analysis and design of curtain wall systems for high rise buildings. [USQ Project]

Analysis and modeling of grouting and its application in civil engineering

Chan, Man Piu (2005) Analysis and modeling of grouting and its application in civil engineering. [USQ Project]

Analysis and taxonomy of network quality of service (QoS) concepts in the long term evolution/system architecture evolution (LTE/SAE) System

Alenazi, Saud Khlaif K. (2010) Analysis and taxonomy of network quality of service (QoS) concepts in the long term evolution/system architecture evolution (LTE/SAE) System. [USQ Project]

Analysis of Engineered Cementitious Composite Bond Strength for Grouting Reinforcement to Concrete Members

McEvoy, Chris (2017) Analysis of Engineered Cementitious Composite Bond Strength for Grouting Reinforcement to Concrete Members. [USQ Project]

Analysis of Flow Characteristics Within USQ's Icing Wind Tunnel

Crosby, James (2021) Analysis of Flow Characteristics Within USQ's Icing Wind Tunnel. [USQ Project]

Analysis of Inflow and Infiltration in a Low-Pressure Sewer System

Alves, Billy Michael (2022) Analysis of Inflow and Infiltration in a Low-Pressure Sewer System. [USQ Project]

Analysis of Influencing Factors of Construction Project Complexity from Different Stakeholders Perspectives

Rowles, Mitchell (2019) Analysis of Influencing Factors of Construction Project Complexity from Different Stakeholders Perspectives. [USQ Project]

Analysis of Kinetic Energy Recovery System Retrofit in conjunction with an Internal Combustion Engine Vehicles

Peters, Ken Kehinde (2017) Analysis of Kinetic Energy Recovery System Retrofit in conjunction with an Internal Combustion Engine Vehicles. [USQ Project]

Analysis of Mobile Laser Scanning (MLS) Ground Control Methods and Achievable Accuracies

Whittington, Mitchell (2019) Analysis of Mobile Laser Scanning (MLS) Ground Control Methods and Achievable Accuracies. [USQ Project]

Analysis of Traffic Control Systems for better coordination of Traffic Signals

Hagan, Mark (2018) Analysis of Traffic Control Systems for better coordination of Traffic Signals. [USQ Project]

Analysis of Traffic Flow through Roundabouts for Improving Performance

McLean, Aaron (2018) Analysis of Traffic Flow through Roundabouts for Improving Performance. [USQ Project]

Analysis of Traffic Speed Deflectometer (TSD) data on State Highways in Southland, New Zealand

Ford, Albie (2022) Analysis of Traffic Speed Deflectometer (TSD) data on State Highways in Southland, New Zealand. [USQ Project]

Analysis of a High Performance Hydraulic System by Numerical Methods

Norley, Jake (2017) Analysis of a High Performance Hydraulic System by Numerical Methods. [USQ Project]

Analysis of a Thermal Oxidiser Systems’ Behaviour using Numerical Methods

Whittle, William (2018) Analysis of a Thermal Oxidiser Systems’ Behaviour using Numerical Methods. [USQ Project]

Analysis of a no-till toolbar for a two wheeled tractor

Fraser, Mark John (2008) Analysis of a no-till toolbar for a two wheeled tractor. [USQ Project]

Analysis of a sheet metal bucket elevator head

Janke, Scott (2005) Analysis of a sheet metal bucket elevator head. [USQ Project]

Analysis of bridge failure due to Cyclone Marcia in Central Queensland using fault tree method

Pathiranage, Thilini (2015) Analysis of bridge failure due to Cyclone Marcia in Central Queensland using fault tree method. [USQ Project]

Analysis of bridges subjected to flood loadings based on different design standards

Jordan, Bradley (2015) Analysis of bridges subjected to flood loadings based on different design standards. [USQ Project]

Analysis of catchment G in Oakey's sewer network

Hooper, James Andrew (2006) Analysis of catchment G in Oakey's sewer network. [USQ Project]

Analysis of circular section blade profiles in a simple peripheral drag VAWT: design investigations and performance modelling

Sedgman, Kristan (2016) Analysis of circular section blade profiles in a simple peripheral drag VAWT: design investigations and performance modelling. [USQ Project]

Analysis of culverts during extreme flood events

Stainwall, Haren (2016) Analysis of culverts during extreme flood events. [USQ Project]

Analysis of data to develop models for spray combustion

Clarke, Jason (2010) Analysis of data to develop models for spray combustion. [USQ Project]

Analysis of engine performance using palm oil methyl ester

Cheah, Siew Lee (2004) Analysis of engine performance using palm oil methyl ester. [USQ Project]

Analysis of high-speed rural traffic crashes within the South-West district of Toowoomba regional council

Keleher, Matthew (2011) Analysis of high-speed rural traffic crashes within the South-West district of Toowoomba regional council. [USQ Project]

Analysis of hydraulic transients in pipeline networks

de Leeuw, Gert Johannes Schreuder (2007) Analysis of hydraulic transients in pipeline networks. [USQ Project]

Analysis of improving Railway transition zones in the Queensland Rail network: intervention in super structure components.

Clarke, Michael (2021) Analysis of improving Railway transition zones in the Queensland Rail network: intervention in super structure components. [USQ Project]

Analysis of providing affordable electricity supply for the outer islands in the Maldives

Worrall, Nofoaluma (2006) Analysis of providing affordable electricity supply for the outer islands in the Maldives. [USQ Project]

Analysis of road crashes at roundabouts in Toowoomba

Richardson, Megan (2016) Analysis of road crashes at roundabouts in Toowoomba. [USQ Project]

Analysis of road safety trends at signalised intersections in Toowoomba

Milton, Ross (2016) Analysis of road safety trends at signalised intersections in Toowoomba. [USQ Project]

Analysis of steady state vs dynamic modelling of groundwater mounding in development areas in WA

Rusconi, Luke (2016) Analysis of steady state vs dynamic modelling of groundwater mounding in development areas in WA. [USQ Project]

Analysis of the Accuracy of Emerging Consumer Photogrammetry Techniques

Lamont, Julian (2017) Analysis of the Accuracy of Emerging Consumer Photogrammetry Techniques. [USQ Project]

Analysis of the Suitability of Roundabouts for Heavy Vehicles driving at High Speeds in Queensland

Young, Lauren (2021) Analysis of the Suitability of Roundabouts for Heavy Vehicles driving at High Speeds in Queensland. [USQ Project]

Analysis of the aerodynamic attributes of motor vehicles

Basson, Johan (2013) Analysis of the aerodynamic attributes of motor vehicles. [USQ Project]

Analysis of the behaviour of composite transom decks for railway bridges

Walker, Scott (2015) Analysis of the behaviour of composite transom decks for railway bridges. [USQ Project]

Analysis of the feasibility of a 3D model for use in civil construction (creating a 3D model for the first span of a bridge)

Palmer, Matthew Alan (2010) Analysis of the feasibility of a 3D model for use in civil construction (creating a 3D model for the first span of a bridge). [USQ Project]

Analysis of the potential for 100% renewable energy supply to Groote Eylandt

Patel, Jayesh (2016) Analysis of the potential for 100% renewable energy supply to Groote Eylandt. [USQ Project]

Analysis of the recycling method for aluminum soda cans

He, Mingqian Belinda (2006) Analysis of the recycling method for aluminum soda cans. [USQ Project]

Analysis of wall formwork in the Australian multi-storey construction industry

Carson, Bradley (2016) Analysis of wall formwork in the Australian multi-storey construction industry. [USQ Project]

Analysis on the behaviour of FRP reinforced concrete railway sleepers

Baker, Trent (2016) Analysis on the behaviour of FRP reinforced concrete railway sleepers. [USQ Project]

Applicability of no-fines concrete as a road pavement

Harber, Paul James (2005) Applicability of no-fines concrete as a road pavement. [USQ Project]

Application of Automated Road Fault Detection for Improved Asset Maintenance Planning

Brisolin, Jacob (2021) Application of Automated Road Fault Detection for Improved Asset Maintenance Planning. [USQ Project]

Application of MODIS and Google earth data to assess the health of the Mitchell grasslands through web based GIS

Robertson, Thomas (2016) Application of MODIS and Google earth data to assess the health of the Mitchell grasslands through web based GIS. [USQ Project]

Application of an urban runoff model using surface specific parameters

Davis, Kieren Peter (2009) Application of an urban runoff model using surface specific parameters. [USQ Project]

Application of geographical information system in underground coal mine to assist operational management

Carter, Andrew William (2006) Application of geographical information system in underground coal mine to assist operational management. [USQ Project]

Applications of Photogrammetric UAVs in Surveying Area: a comparison on topography survey, using UAV method and Conventional surveying method

Ma, Xin (2018) Applications of Photogrammetric UAVs in Surveying Area: a comparison on topography survey, using UAV method and Conventional surveying method. [USQ Project]

Applications of geospatial information technology for fire risk assessment and management in NSW

Wilson, Maree (2005) Applications of geospatial information technology for fire risk assessment and management in NSW. [USQ Project]

Applied Neural Network Modelling of Mobile Plant Equipment for use in Predictive Maintenance

Kimber, Robert Allen (2018) Applied Neural Network Modelling of Mobile Plant Equipment for use in Predictive Maintenance. [USQ Project]

Apply Advanced Process Control to Fine Screening Circuit in Large Mineral Processing Plant

Kapor, Alex (2021) Apply Advanced Process Control to Fine Screening Circuit in Large Mineral Processing Plant. [USQ Project]

Applying Systems Engineering Approaches to the Management of Electrical Engineering Projects

Nooriafshar, Darius (2019) Applying Systems Engineering Approaches to the Management of Electrical Engineering Projects. [USQ Project]

Applying Urban Stormwater Modelling to Aquaculture Prawn Farm Effluent in Queensland

Flores, Manuel (2020) Applying Urban Stormwater Modelling to Aquaculture Prawn Farm Effluent in Queensland. [USQ Project]

Aquaplaning assessment and mitigation in flat terrains

Dudman, Benjamin (2014) Aquaplaning assessment and mitigation in flat terrains. [USQ Project]

Aquaplaning: an investigation of surface flow calculation

Sheridan, Liam (2014) Aquaplaning: an investigation of surface flow calculation. [USQ Project]

Arc flash protection of a low voltage motor control centre

Dugdale, Paul Nicholas (2014) Arc flash protection of a low voltage motor control centre. [USQ Project]

Arduino modbus simulator

Beccarelli, Ryan (2016) Arduino modbus simulator. [USQ Project]

Assess the Viability of Aerial Baiting for Dingoes in South West Queensland Using GIS Based Weighted Linear Combination Modelling

Harris, Matthew (2017) Assess the Viability of Aerial Baiting for Dingoes in South West Queensland Using GIS Based Weighted Linear Combination Modelling. [USQ Project]

Assessing RTK GPS for a suburban survey practice

Jacobs, Peter Gregory (2005) Assessing RTK GPS for a suburban survey practice. [USQ Project]

Assessing spatial mismatch patterns in the Gold Coast

Zador, Tari (2016) Assessing spatial mismatch patterns in the Gold Coast. [USQ Project]

Assessing the impacts of Multi-Combination Vehicles on Motorways

Harris, Jesse (2017) Assessing the impacts of Multi-Combination Vehicles on Motorways. [USQ Project]

Assessing the true cost of design variations – a designer’s perspective

Liddell, Benjamin Steven (2014) Assessing the true cost of design variations – a designer’s perspective. [USQ Project]

Assessment of Automatic Target Recognition Against Manual Aiming in Conventional Establishment of Survey Control

Lazarevic, Aleksandar (2019) Assessment of Automatic Target Recognition Against Manual Aiming in Conventional Establishment of Survey Control. [USQ Project]

Assessment of appropriate pressure vessel flange bolt tension by finite element modelling

Taylor, Brett C. (2004) Assessment of appropriate pressure vessel flange bolt tension by finite element modelling. [USQ Project]

Assessment of crop health in relation to competition from weeds: using balloon-borne images and pectrometer data

Darr, Shawn Geoffrey (2004) Assessment of crop health in relation to competition from weeds: using balloon-borne images and pectrometer data. [USQ Project]

Assessment of factors influencing water reuse opportunities in Western Australia

Babin, Robyn E. (2005) Assessment of factors influencing water reuse opportunities in Western Australia. [USQ Project]

Assessment of habitat factors and development of a species distribution model for the long nosed potoroo (Potorous tridactylus tridactylus) in SEQ

Trent, Stephen Wade (2015) Assessment of habitat factors and development of a species distribution model for the long nosed potoroo (Potorous tridactylus tridactylus) in SEQ. [USQ Project]

Assessment of the FARO 3D focus laser scanner for forest inventory

Stanley, Thomas (2013) Assessment of the FARO 3D focus laser scanner for forest inventory. [USQ Project]

Assessment of the feasibility of a terrestrial scanner in underground and surface mining at BHPB Cannington mine

Tozer, Paul (2005) Assessment of the feasibility of a terrestrial scanner in underground and surface mining at BHPB Cannington mine. [USQ Project]

Asset Management Modelling

Karunaharan, Janahan (2017) Asset Management Modelling. [USQ Project]

Asset Management Planning for New Zealand Local Roads

Thomson, Brendon (2020) Asset Management Planning for New Zealand Local Roads. [USQ Project]

Asset condition monitoring of Gympie regional council’s road network

Watson, Liam Douglas (2016) Asset condition monitoring of Gympie regional council’s road network. [USQ Project]

Asset management for Tamworth Regional Council’s sewer network

Coe, Daniel (2010) Asset management for Tamworth Regional Council’s sewer network. [USQ Project]

Asset management framework for NSW local government

Butler, Michael (2015) Asset management framework for NSW local government. [USQ Project]

Assisted standing and walking mode for Robug IV eight legged robot

Luckemeyer, Nils (2005) Assisted standing and walking mode for Robug IV eight legged robot. [USQ Project]

Atterberg limits and their relationship to longitudinal cracking in granular pavements

Stanton, Dale John (2010) Atterberg limits and their relationship to longitudinal cracking in granular pavements. [USQ Project]

Australian Carbon Credit Unit Calculator for Concrete Recycling Facility Use

Hill, Hamish (2022) Australian Carbon Credit Unit Calculator for Concrete Recycling Facility Use. [USQ Project]

Automated Identification of Insect Pests in Traps

Rousseau, Pierre (2020) Automated Identification of Insect Pests in Traps. [USQ Project]

Automated shark detection using computer vision

Byles, K. (2016) Automated shark detection using computer vision. [USQ Project]

Automated soil compaction machine for the preparation of Califorian bearing ratio and proctor specimens

Walker, Cameron (2010) Automated soil compaction machine for the preparation of Califorian bearing ratio and proctor specimens. [USQ Project]

Automatic Circuit Recloser (ACR) communications using P25 RMU (Radio Modem Unit)

Hoang, Hung (2016) Automatic Circuit Recloser (ACR) communications using P25 RMU (Radio Modem Unit). [USQ Project]

Automatic roller shell groover

Hugo, Michael (2006) Automatic roller shell groover. [USQ Project]

Automatic splint to prevent self-harm in autistic and brain injured people

Richardson, Mark (2015) Automatic splint to prevent self-harm in autistic and brain injured people. [USQ Project]

Automating Processes for Cross-checking Plans and Invert Levels for Laying Drainage Mains on Grade

Sands, Jeremy (2018) Automating Processes for Cross-checking Plans and Invert Levels for Laying Drainage Mains on Grade. [USQ Project]

Automation & Optimisation of Soil Hardness Testing Device

Kohn, Hayden (2017) Automation & Optimisation of Soil Hardness Testing Device. [USQ Project]

Automation of a load-haul-dump (LHD) unit

Partridge, Toni Leigh (2006) Automation of a load-haul-dump (LHD) unit. [USQ Project]

Automation of the rollingstock twist test

Holzheimer, Carson Keith (2007) Automation of the rollingstock twist test. [USQ Project]

Autonomous Solar Panels Cleaning System

Aqeil, Mohammad Tahir (2017) Autonomous Solar Panels Cleaning System. [USQ Project]

Autonomous navigation of a partially unknown environment

Pont, Jason (2019) Autonomous navigation of a partially unknown environment. [USQ Project]

Autonomous unmanned aerial surveillance vehicle - autonomous control and flight dynamics

Littleton, Craig Andrew (2005) Autonomous unmanned aerial surveillance vehicle - autonomous control and flight dynamics. [USQ Project]

Axial Flux Permanent Magnet coreless machine

Kaliyev, Vladislav (2015) Axial Flux Permanent Magnet coreless machine. [USQ Project]

Axisymmetric scramjet inlet operation with varying cowl positions

Kerr, Mitchell (2013) Axisymmetric scramjet inlet operation with varying cowl positions. [USQ Project]

BIM standardisation and its effect on project delivery in the Australian civil design and construction industry

Thrower, Ryan (2021) BIM standardisation and its effect on project delivery in the Australian civil design and construction industry. [USQ Project]

Backup Relay for 66kV Hub Substation Protection in the High Voltage Distribution Network

Chandigere, Tarisai (2018) Backup Relay for 66kV Hub Substation Protection in the High Voltage Distribution Network. [USQ Project]

Balancing a two wheeled robot

Mokonopi, Kealeboga (2006) Balancing a two wheeled robot. [USQ Project]

Balancing wheeled robot

Ho, Khoon Chy Randal (2005) Balancing wheeled robot. [USQ Project]

Bathymetric survey of flooded open cast mine workings

Surtees, Mark Stephen James (2009) Bathymetric survey of flooded open cast mine workings. [USQ Project]

Battery SMART charge controller/combined co-gen grid connected inverter design and simulation

Smith, C. Morgan (2016) Battery SMART charge controller/combined co-gen grid connected inverter design and simulation. [USQ Project]

Behavior of concrete when using RAP (Reclaimed Asphalt Pavement) as a coarse aggregate material

Wiya, Robert (2016) Behavior of concrete when using RAP (Reclaimed Asphalt Pavement) as a coarse aggregate material. [USQ Project]

Behaviour of GFRP Reinforced Concrete Railway Sleepers: Finite Element and Fibre Model Analyses

Baker, Angel Lee (2018) Behaviour of GFRP Reinforced Concrete Railway Sleepers: Finite Element and Fibre Model Analyses. [USQ Project]

Behaviour of GFRP Reinforced Concrete Slab on Ground

Rayner, Andrew (2022) Behaviour of GFRP Reinforced Concrete Slab on Ground. [USQ Project]

Behaviour of GFRP-Reinforced Precast Concrete Decks Under Uniform Loading

Heap, Harvey (2021) Behaviour of GFRP-Reinforced Precast Concrete Decks Under Uniform Loading. [USQ Project]

Behaviour of concrete columns with different levels of steel corrosion and repaired with a composite Jacket

Reibelt, Tyla (2017) Behaviour of concrete columns with different levels of steel corrosion and repaired with a composite Jacket. [USQ Project]

Behaviour of concrete with oil contamination and reinforced with fibres

King, Job (2016) Behaviour of concrete with oil contamination and reinforced with fibres. [USQ Project]

Behaviour of fibre composite walkways and grating

Nicol, Lachlan Keith (2014) Behaviour of fibre composite walkways and grating. [USQ Project]

Behaviour of gang-nail plated timber joints in tension perpendicular to the grain

Klinge, Craig Desmond (2012) Behaviour of gang-nail plated timber joints in tension perpendicular to the grain. [USQ Project]

Behaviour of innovative fibre composite sandwich panels for structural applications

Plain, Matthew (2009) Behaviour of innovative fibre composite sandwich panels for structural applications. [USQ Project]

Behaviour of laminated fibre composite sandwich girders

Pickford, Christopher Ian (2009) Behaviour of laminated fibre composite sandwich girders. [USQ Project]

Behaviour of polymer concrete for infilling fibre composite tubes

O'Keeffe, Andrew (2011) Behaviour of polymer concrete for infilling fibre composite tubes. [USQ Project]

Benefit of partnering in the Hong Kong construction industry

Mak, Chi Keung (2005) Benefit of partnering in the Hong Kong construction industry. [USQ Project]

Benefits and Challenges of Applying Travelling Wave Technology to Sub-transmission Networks

Wyper, Rye (2022) Benefits and Challenges of Applying Travelling Wave Technology to Sub-transmission Networks. [USQ Project]

Best percentage by weight of micro-spheres as fillers in phenolic resins, with fracture toughness as a benchmark

Davey, Robert James (2006) Best percentage by weight of micro-spheres as fillers in phenolic resins, with fracture toughness as a benchmark. [USQ Project]

Best percentage weight of microspheres as fillers in resin using three-point bending test

Gurney, Richard Noel (2006) Best percentage weight of microspheres as fillers in resin using three-point bending test. [USQ Project]

Best practice management of industrial process control alarm floods

Guy, Ross (2016) Best practice management of industrial process control alarm floods. [USQ Project]

Bike tour plan for Toowoomba region

Jesshope, Ashlee Elizabeth (2008) Bike tour plan for Toowoomba region. [USQ Project]

Biogas generation from an anaerobic pond 'abattoir'

Di Bella, Robert Michael (2010) Biogas generation from an anaerobic pond 'abattoir'. [USQ Project]

Biometric analysis for remote examination system

Hockey, Josh (2011) Biometric analysis for remote examination system. [USQ Project]

Bioretention basin best practice design guidelines

Boskovic, Selina (2008) Bioretention basin best practice design guidelines. [USQ Project]

Bridge approach guardrail prioritisation

Harvey, Warren John (2007) Bridge approach guardrail prioritisation. [USQ Project]

Bridge load assessment using machine learning and weigh-in-motion data

Keenan, Mike (2022) Bridge load assessment using machine learning and weigh-in-motion data. [USQ Project]

Brisbane City Council strategic planning: delivery of sustainable transport

Savage, Andrew (2013) Brisbane City Council strategic planning: delivery of sustainable transport. [USQ Project]

Broadband satellite internet service testing

Leong, Ik Sung (2011) Broadband satellite internet service testing. [USQ Project]

Bucking Units - A More Effective Approach

Gould, Jackson (2021) Bucking Units - A More Effective Approach. [USQ Project]

Building Information Modelling (BIM) and its adoption and effectiveness as a tool in the management of constructions projects in Australia

Nowak, Adrian (2020) Building Information Modelling (BIM) and its adoption and effectiveness as a tool in the management of constructions projects in Australia. [USQ Project]

Building Information Modelling: an explorative study

Patterson, Melanie (2015) Building Information Modelling: an explorative study. [USQ Project]

Building a two wheeled balancing robot

Miller, P. (2008) Building a two wheeled balancing robot. [USQ Project]

Burdekin Falls Dam: investigation of the structural integrity of the outlet works radial gate and fixed wheel gate under emergency closure situations

Gravatt, Manu Richard (2005) Burdekin Falls Dam: investigation of the structural integrity of the outlet works radial gate and fixed wheel gate under emergency closure situations. [USQ Project]

CBD Revitalisation - The Relationship Between Laneway Activation and Sense of Place

Hughes, Brittany (2018) CBD Revitalisation - The Relationship Between Laneway Activation and Sense of Place. [USQ Project]

CFD Analysis of a Primary Nozzle Vortex Generator on Steam Ejector Performance

Cooper, Brodie (2022) CFD Analysis of a Primary Nozzle Vortex Generator on Steam Ejector Performance. [USQ Project]

CFD modelling of a pump intake

Truasheim, Barak (2011) CFD modelling of a pump intake. [USQ Project]

CSG water as a medium to grow marine microalgae for biofuel production

Harrington, Daniel (2011) CSG water as a medium to grow marine microalgae for biofuel production. [USQ Project]

Calculation and comparison of the noise and latency of RTK observations using radio link and NTRIP

Penman, Brian (2011) Calculation and comparison of the noise and latency of RTK observations using radio link and NTRIP. [USQ Project]

Callide C Power Station's generator protection system 'ride through capabilities' for various external faults

Mowat, David (2010) Callide C Power Station's generator protection system 'ride through capabilities' for various external faults. [USQ Project]

Camera-based plant sensing system for estimating crop maturity

McMahon, Sean (2018) Camera-based plant sensing system for estimating crop maturity. [USQ Project]

Capacitive Voltage Transformer Monitoring and Failure Mode Analysis

Viero, Morgan (2019) Capacitive Voltage Transformer Monitoring and Failure Mode Analysis. [USQ Project]

Carbon nanotubes (CNT) as potentially a more effective material for photovoltaic (PV) converters

Gardner, Craig (2008) Carbon nanotubes (CNT) as potentially a more effective material for photovoltaic (PV) converters. [USQ Project]

Carbon offsetting through soil carbon sequestration for the coal mining industry: an application of a soil carbon modelling

Handley, Robert (2012) Carbon offsetting through soil carbon sequestration for the coal mining industry: an application of a soil carbon modelling. [USQ Project]

Cardiac Biometric Authentication Using Channel State Information

Armanasco, Matthew (2022) Cardiac Biometric Authentication Using Channel State Information. [USQ Project]

Case Study: Bring back 'the Gap'

Vaughan, Patricia (2020) Case Study: Bring back 'the Gap'. [USQ Project]

Castor oil biodiesel for diesel engine

Almutairi, Fahad M. H. M. H. (2018) Castor oil biodiesel for diesel engine. [USQ Project]

Cathodic protection of reinforced concrete bridges in the marine environment as an asset management tool

Brailsford, Steven (2013) Cathodic protection of reinforced concrete bridges in the marine environment as an asset management tool. [USQ Project]

Causes of Delays and Disputes in the Saudi Arabian Construction Industry Compared with the Degree of Delays and Disputes in the UK Construction Industry

Abougamil, Reda Abdelshafy Abouzied (2020) Causes of Delays and Disputes in the Saudi Arabian Construction Industry Compared with the Degree of Delays and Disputes in the UK Construction Industry. [USQ Project]

Centreline tools upgrade

Thompson, Robert William (2008) Centreline tools upgrade. [USQ Project]

Challenges in Project Management of Infrastructure Projects in Fiji

Singh, Hardeep (2018) Challenges in Project Management of Infrastructure Projects in Fiji. [USQ Project]

Characteristics of Oil Contaminated Fine Aggregates in Concrete, Reinforced with Helix Micro-Rebar

Campbell, Thomas (2018) Characteristics of Oil Contaminated Fine Aggregates in Concrete, Reinforced with Helix Micro-Rebar. [USQ Project]

Chassis design for SAE racer

O'Neil, Anthony M. (2005) Chassis design for SAE racer. [USQ Project]

Chassis development for the formula SAE racer

Armstead, Jared Kenneth (2006) Chassis development for the formula SAE racer. [USQ Project]

Chemical Stabilisation Alternatives for Marginal Materials Found Within the Cobar Region

Pierini, Adrienne (2017) Chemical Stabilisation Alternatives for Marginal Materials Found Within the Cobar Region. [USQ Project]

Chemical resistance of geopolymer concrete against H2SO4 & NaOH

Tomkins, Brock William (2011) Chemical resistance of geopolymer concrete against H2SO4 & NaOH. [USQ Project]

Chemically Bonded Excavator Bucket Redesign

Wright, Craig (2019) Chemically Bonded Excavator Bucket Redesign. [USQ Project]

Choice of Vehicle Type for the USQ Pool Car Fleet

Butaish, Mohammed Naji (2017) Choice of Vehicle Type for the USQ Pool Car Fleet. [USQ Project]

Circuit breaker simulated operation & behaviour under faulted power system conditions

Wentworth, B. (2016) Circuit breaker simulated operation & behaviour under faulted power system conditions. [USQ Project]

Circular geopolymer concrete columns with composite rebars

Robertson, Matthew (2015) Circular geopolymer concrete columns with composite rebars. [USQ Project]

Clear zones in urban environments

Gallagher, Tony (2007) Clear zones in urban environments. [USQ Project]

Climate Projection of Extreme Sea Level Events Along the Queensland Coast

Lawrence, Rachael (2017) Climate Projection of Extreme Sea Level Events Along the Queensland Coast. [USQ Project]

Cloud detection system for the Mt Kent observatory

Gwynne, Aeolyn (2005) Cloud detection system for the Mt Kent observatory. [USQ Project]

Co-firing of rice husk for electricity generation in Malaysia

Lee, Ven Han (2004) Co-firing of rice husk for electricity generation in Malaysia. [USQ Project]

Cognitive Radio for Improved NBN Access in Regional Areas

Hardless, Benedict (2021) Cognitive Radio for Improved NBN Access in Regional Areas. [USQ Project]

Combination Harvest and Bale Machinery’s Impact on Cotton Productivity in High Clay Cotton Fields of Northern NSW

Henderson, Adam (2022) Combination Harvest and Bale Machinery’s Impact on Cotton Productivity in High Clay Cotton Fields of Northern NSW. [USQ Project]

Commissioning and Testing of Protection Relays for Distribution Systems

Khan, Imran Asghar (2017) Commissioning and Testing of Protection Relays for Distribution Systems. [USQ Project]

Communications for smart grid substation monitoring using WIMAX protocol

Anumula, Sreekanth (2014) Communications for smart grid substation monitoring using WIMAX protocol. [USQ Project]

Compaction density of partially saturated soils

Hollingshead, Fraser (2022) Compaction density of partially saturated soils. [USQ Project]

Comparative Evaluation of the In-Plane Shear Behaviour of GFRP Composite Wall Systems With and Without Window Openings

Xeros, Saxon R. (2021) Comparative Evaluation of the In-Plane Shear Behaviour of GFRP Composite Wall Systems With and Without Window Openings. [USQ Project]

Comparative evaluation of the axial behaviour of circular and square hollow concrete columns reinforced with GFRP bars

Heslin, Terry (2018) Comparative evaluation of the axial behaviour of circular and square hollow concrete columns reinforced with GFRP bars. [USQ Project]

Comparative properties of epoxy/sawdust composites with palm oil cured by microwave and thermal treatment

Donald, Michael Craig (2010) Comparative properties of epoxy/sawdust composites with palm oil cured by microwave and thermal treatment. [USQ Project]

Comparative study of engineering leadership of senior engineers in Malaysia & Australia within the construction industry

H'ng, Po Lyn (2007) Comparative study of engineering leadership of senior engineers in Malaysia & Australia within the construction industry. [USQ Project]

Comparative study of modular construction methodologies within residential and commercial applications

French, Corey R. M. (2022) Comparative study of modular construction methodologies within residential and commercial applications. [USQ Project]

Comparative study on precast concrete and cast in-situ reinforced concrete panels for building construction in Queensland

Singla, Prince (2018) Comparative study on precast concrete and cast in-situ reinforced concrete panels for building construction in Queensland. [USQ Project]

Comparing different heating methods for determination of moisture content in soils

Cormick, Adam (2015) Comparing different heating methods for determination of moisture content in soils. [USQ Project]

Comparison between robotic total station reflector-less measurement and terrestrial laser scanning for building modelling

Copley, Matthew Kevin (2019) Comparison between robotic total station reflector-less measurement and terrestrial laser scanning for building modelling. [USQ Project]

Comparison between terrestrial close range photogrammetry and terrestrial laser scanning

Broome, Lachlan (2016) Comparison between terrestrial close range photogrammetry and terrestrial laser scanning. [USQ Project]

Comparison of Engine Performance, Emissions and Nozzle Spray Pattern of Different Biofuels

Aldhefiri, Nader A. S. J. Kh (2020) Comparison of Engine Performance, Emissions and Nozzle Spray Pattern of Different Biofuels. [USQ Project]

Comparison of PV maximum power point

Kirby, Christopher (2015) Comparison of PV maximum power point. [USQ Project]

Comparison of SLAM algorithms and neural networks for autonomous navigation in simulated environments

McConnell, Brayden (2020) Comparison of SLAM algorithms and neural networks for autonomous navigation in simulated environments. [USQ Project]

Comparison of TLS to total station accuracy for tree parameter measurement in biomass estimation

Krautz, Nathan (2019) Comparison of TLS to total station accuracy for tree parameter measurement in biomass estimation. [USQ Project]

Comparison of Vertical Positional Uncertainties between AUSGeoid09 and AUSGeoid2020 in South East Queensland

Beavis, Callum (2019) Comparison of Vertical Positional Uncertainties between AUSGeoid09 and AUSGeoid2020 in South East Queensland. [USQ Project]

Comparison of a traditional and a distributed storage water supply network for an isolated system

Horan, Darryl (2013) Comparison of a traditional and a distributed storage water supply network for an isolated system. [USQ Project]

Comparison of direct rainfall and lumped-conceptual rainfall runoff routing methods in tropical North Queensland – a case study of Low Drain, Mount Low, Townsville

Johnson, Peter (2013) Comparison of direct rainfall and lumped-conceptual rainfall runoff routing methods in tropical North Queensland – a case study of Low Drain, Mount Low, Townsville. [USQ Project]

Comparison of injury criteria for human head impacts

Treverrow, Daniel (2006) Comparison of injury criteria for human head impacts. [USQ Project]

Comparison of land vs floating evaporation pans to measure evaporation from dairy farm effluent ponds in the Waikato Region, New Zealand

Wass, Jack (2019) Comparison of land vs floating evaporation pans to measure evaporation from dairy farm effluent ponds in the Waikato Region, New Zealand. [USQ Project]

Comparison of life cycle energy consumption of alternative irrigation systems

Jacobs, Sunny (2006) Comparison of life cycle energy consumption of alternative irrigation systems. [USQ Project]

Comparison of moisture density relationship tests in civil engineering materials

Garrard, Brian John (2005) Comparison of moisture density relationship tests in civil engineering materials. [USQ Project]

Comparison of robotic total stations for scanning of volumes or structures

Jones, Jeffrey Francis (2009) Comparison of robotic total stations for scanning of volumes or structures. [USQ Project]

Comparison of the Practical Application of ARR1987 and ARR2016 for Urban Stormwater Catchments in Bundaberg

Fulton, David (2018) Comparison of the Practical Application of ARR1987 and ARR2016 for Urban Stormwater Catchments in Bundaberg. [USQ Project]

Composites from natural renewable resources in civil engineering: Epoxidized vegetable oil with epoxy resin, fly ash and sawdust fillers(mechanical, physical and structural properties)

Mayen, David Ayuen (2009) Composites from natural renewable resources in civil engineering: Epoxidized vegetable oil with epoxy resin, fly ash and sawdust fillers(mechanical, physical and structural properties). [USQ Project]

Comprehensive design charts for the footing on slope problem

Lyle, Nathan Ross (2009) Comprehensive design charts for the footing on slope problem. [USQ Project]

Compressed natural gas as an alternative fuel in diesel engines

Wong, Wei Loon (2005) Compressed natural gas as an alternative fuel in diesel engines. [USQ Project]

Compressive Behaviour of Short Engineered Cementitious Composite Columns Containing Recycled Polyethylene Terephthalate Aggregate

Gough, Tom (2022) Compressive Behaviour of Short Engineered Cementitious Composite Columns Containing Recycled Polyethylene Terephthalate Aggregate. [USQ Project]

Compressive behaviour of reinforced concrete columns with a prefabricated fibre reinforced jacket

Porter, Jacob (2017) Compressive behaviour of reinforced concrete columns with a prefabricated fibre reinforced jacket. [USQ Project]

Computational fluid dynamics (CFD) investigation of the thermal efficiency of micro climate conditioning of a typical workstation

Napper, Bryce (2006) Computational fluid dynamics (CFD) investigation of the thermal efficiency of micro climate conditioning of a typical workstation. [USQ Project]

Computational fluid dynamics (CFD): investigation for improving pigs' housing design

Chan, Teck Wai Alan (2005) Computational fluid dynamics (CFD): investigation for improving pigs' housing design. [USQ Project]

Computational fluid mechanics investigation of ventilation aboard a livestock vessel

Outschoorn, Jeremy Paul (2005) Computational fluid mechanics investigation of ventilation aboard a livestock vessel. [USQ Project]

Computer Model for Sensor-Less Daylight Harvesting

Montes, Juan (2019) Computer Model for Sensor-Less Daylight Harvesting. [USQ Project]

Concept design of cargo aircraft on-board loader

Baartz, Rory (2018) Concept design of cargo aircraft on-board loader. [USQ Project]

Conceptual Design of a Digital Meter for Power, Gas and Water Utilities

Hutchison, Alana (2018) Conceptual Design of a Digital Meter for Power, Gas and Water Utilities. [USQ Project]

Conceptual Design of a Total Wrist Arthroplasty

Johnstone, Paul (2017) Conceptual Design of a Total Wrist Arthroplasty. [USQ Project]

Conceptual design of a sustainable energy-waste solution for the residential sector

Gould, Nicholas (2009) Conceptual design of a sustainable energy-waste solution for the residential sector. [USQ Project]

Conceptual design of the non-assisted wheelchair, for improved functionality and ergonomics for public spaces

Cassim, Ahamed Asraz Aslam (2019) Conceptual design of the non-assisted wheelchair, for improved functionality and ergonomics for public spaces. [USQ Project]

Condition Monitoring for Predictive Maintenance Purposes

Fisher, Matthew (2019) Condition Monitoring for Predictive Maintenance Purposes. [USQ Project]

Condition Monitoring using a Low Power Wide Area Network based on LoRaWAN

Ball, Jonathon (2019) Condition Monitoring using a Low Power Wide Area Network based on LoRaWAN. [USQ Project]

Condition monitoring of rotating machinery - vibration analysis

Little, Richard A (2015) Condition monitoring of rotating machinery - vibration analysis. [USQ Project]

Conductivity of wall materials based on natural fiber

Alsinan, Abdulaziz (2015) Conductivity of wall materials based on natural fiber. [USQ Project]

Confirmation program of safety inspection of lift components (CPSI)

Wai-Ming, Yeung (2008) Confirmation program of safety inspection of lift components (CPSI). [USQ Project]

Conflict of Interest: The Dual-Role Superintendent / Lead Designer in Construct Only Contracts

Swift, Alexander Robert John (2019) Conflict of Interest: The Dual-Role Superintendent / Lead Designer in Construct Only Contracts. [USQ Project]

Conjugate heat transfer analysis evaluation of a water cooled component for use in an electric arc furnace

Rogers, S. (2013) Conjugate heat transfer analysis evaluation of a water cooled component for use in an electric arc furnace. [USQ Project]

Construction technology for high rise buildings in Hong Kong

Lau, Chi Hing (2006) Construction technology for high rise buildings in Hong Kong. [USQ Project]

Continuously Variable Ratio Rocker Arms

Schnebli, Benjamin (2020) Continuously Variable Ratio Rocker Arms. [USQ Project]

Contribution of Facilities Management Services to Green Building Rating Score

Calcutt, Ryan (2018) Contribution of Facilities Management Services to Green Building Rating Score. [USQ Project]

Control and instrumentation for the USQ Formula SAE-A race car

Moody, Bradley John (2005) Control and instrumentation for the USQ Formula SAE-A race car. [USQ Project]

Control of Underground Mining Coal Dust Using Wetting Agents

Hawkins, Samuel Richard (2017) Control of Underground Mining Coal Dust Using Wetting Agents. [USQ Project]

Control of accumulator in a continuous processing line

Crawford-Ross, Michael Richard (2008) Control of accumulator in a continuous processing line. [USQ Project]

Control of early thermal cracking of raft foundation by using slagcrete portland blast-furnace cement (PBFC)

Kong, Mun Kai (2005) Control of early thermal cracking of raft foundation by using slagcrete portland blast-furnace cement (PBFC). [USQ Project]

Controller Area Network to Modbus network bridge to interface gas detection units with Building Management Systems

Quinton, Matthew (2015) Controller Area Network to Modbus network bridge to interface gas detection units with Building Management Systems. [USQ Project]

Conversion of Cadastral Survey Information into LandXML Files using Machine Learning

De La Rosa, Oscar Garrido (2019) Conversion of Cadastral Survey Information into LandXML Files using Machine Learning. [USQ Project]

Cooling of high temperature bore water using thermoelectric generated power

Finnerty, Sean (2018) Cooling of high temperature bore water using thermoelectric generated power. [USQ Project]

Coordinated Control of UAV Swarm Using Multi Agent Control Scheme [Part II]

Almarri, Abdulaziz (2018) Coordinated Control of UAV Swarm Using Multi Agent Control Scheme [Part II]. [USQ Project]

Corrosion in the boiler tubes of the Tuas South Incineration Plant, Singapore

Ali, Noorahmad Bin (2005) Corrosion in the boiler tubes of the Tuas South Incineration Plant, Singapore. [USQ Project]

Cost Effective Polyethylene Terephthalate (PET) Object Orientation Detection System

Jeanes, Gareth (2018) Cost Effective Polyethylene Terephthalate (PET) Object Orientation Detection System. [USQ Project]

Cost effective galvanising in remote areas

McInally, Stuart Anthony (2013) Cost effective galvanising in remote areas. [USQ Project]

Cost effective pavement reconstruction or rehabilitation profile(s) in Townsville

Single, John H. (2014) Cost effective pavement reconstruction or rehabilitation profile(s) in Townsville. [USQ Project]

Cost effectiveness of street lighting

Weis, Paul Raymond (2007) Cost effectiveness of street lighting. [USQ Project]

Cost effectiveness of suburban street lighting

Fowler, Jason (2006) Cost effectiveness of suburban street lighting. [USQ Project]

Luke, Ricky (2006) Cost effectiveness of suburban street lighting. [USQ Project]

Cost-effective 3D modelling

Walker, Bryan Patrick (2007) Cost-effective 3D modelling. [USQ Project]

Creating a performance management system for contractors to assess subcontractors

Linnan, Nicholas (2015) Creating a performance management system for contractors to assess subcontractors. [USQ Project]

Creating a simplified model of the Alkali-Silica Reaction in concrete by utilising finite element modelling techniques

Murdoch, Robert (2015) Creating a simplified model of the Alkali-Silica Reaction in concrete by utilising finite element modelling techniques. [USQ Project]

Cricketing Head Injury Analysis and Conceptual Prevention Design

Hawkins, Matthew (2017) Cricketing Head Injury Analysis and Conceptual Prevention Design. [USQ Project]

Critical Factors Affecting Construction Productivity in Fiji

Kumar, Navneet Vishal (2017) Critical Factors Affecting Construction Productivity in Fiji. [USQ Project]

Critical Factors Affecting Sustainability in Australian Civil Construction Industry: An Investigation into Sustainability Culture

Cawdell-Smith, Jack H. (2020) Critical Factors Affecting Sustainability in Australian Civil Construction Industry: An Investigation into Sustainability Culture. [USQ Project]

Critical analysis of RCM in an Australian ANSP context

Spurry, Nicholas (2015) Critical analysis of RCM in an Australian ANSP context. [USQ Project]

Critical review of techniques for rigid spoolpiece metrology observation and reduction

Falken, Jason (2005) Critical review of techniques for rigid spoolpiece metrology observation and reduction. [USQ Project]

Crusher Dust as Man Sand Replacement of Natural Sand

Prasad, Nirbhay (2019) Crusher Dust as Man Sand Replacement of Natural Sand. [USQ Project]

Cryogenic Temperature Measurement for LNG Loading

Orme, Thomas (2018) Cryogenic Temperature Measurement for LNG Loading. [USQ Project]

Current and future capacity of the Wirraglen Scout Reserve Wetlands to improve urban stormwater quality at Highfields

Millikan, Toby (2006) Current and future capacity of the Wirraglen Scout Reserve Wetlands to improve urban stormwater quality at Highfields. [USQ Project]

Current controller for inverter bridge designed for grid-connected photovoltaic system

Miletic, Alista (2005) Current controller for inverter bridge designed for grid-connected photovoltaic system. [USQ Project]

DEA control interface, power system analysis, synchronisation and load management controls - design, construction and commissioning

Drew, Aaron Matthew (2009) DEA control interface, power system analysis, synchronisation and load management controls - design, construction and commissioning. [USQ Project]

DEM generation and hydrologic modelling using LiDAR data

Kilpatrick, Glen R (2015) DEM generation and hydrologic modelling using LiDAR data. [USQ Project]

DSP based lock-in amplifier

Skillington, Robert George (2013) DSP based lock-in amplifier. [USQ Project]

DTM Accuracy Comparison Between Onboard RTK GNSS UAV versus Low Cost Quadcopter UAV at Different Geomorphological Sites: A Malaysian Approach

Shu, Ji Linn (2018) DTM Accuracy Comparison Between Onboard RTK GNSS UAV versus Low Cost Quadcopter UAV at Different Geomorphological Sites: A Malaysian Approach. [USQ Project]

Dam deformation surveys with modern technology

Atkinson, Jack Allan (2014) Dam deformation surveys with modern technology. [USQ Project]

Dam water extraction analysis for Toowoomba under increasing demand

Pfeiffer, Viktoria (2020) Dam water extraction analysis for Toowoomba under increasing demand. [USQ Project]

Darwin residential end use pilot study

Seccull, Christopher (2011) Darwin residential end use pilot study. [USQ Project]

Data mining using Matlab

Woolf, Rodney J. (2005) Data mining using Matlab. [USQ Project]

Decision support system for assessing the benefits of incorporating swabbing facilities into water pipelines

Fahey, Lawrence John (2010) Decision support system for assessing the benefits of incorporating swabbing facilities into water pipelines. [USQ Project]

Defining non-tidal riparian boundaries

Lawless, Daniel Patrick (2006) Defining non-tidal riparian boundaries. [USQ Project]

Defining the human security understanding and expectations of the Queensland Branch of the United Firefighters' Union in the context of Australia's burgeoning Asian free-trade ambitions

Wilson, Hugh B. (2005) Defining the human security understanding and expectations of the Queensland Branch of the United Firefighters' Union in the context of Australia's burgeoning Asian free-trade ambitions. [USQ Project]

Demand Management Storage Project (DMSP) – an application of grid scale battery energy storage systems

Jiang, Jennifer (2015) Demand Management Storage Project (DMSP) – an application of grid scale battery energy storage systems. [USQ Project]

Deriving a high resolution DEM from ALOS PRISM data

Campbell, Andrew Charles (2009) Deriving a high resolution DEM from ALOS PRISM data. [USQ Project]

Deriving land use and land cover maps from 2.5m SPOT 5 imagery

Long, Geoffrey Michael (2008) Deriving land use and land cover maps from 2.5m SPOT 5 imagery. [USQ Project]

Deriving transformation parameters for existing survey co-ordinate systems in the Australian Capital Territory

Steger, Jason P. (2008) Deriving transformation parameters for existing survey co-ordinate systems in the Australian Capital Territory. [USQ Project]

Design Analysis of Guy Wires of Communication Towers: Industry Based Project Proposed by Raytheon Australia

Fritz, Patrick (2022) Design Analysis of Guy Wires of Communication Towers: Industry Based Project Proposed by Raytheon Australia. [USQ Project]

Design a prototype solar dryer for drying sea cucumber

Vaipulu, Seini 'Ela Uatekini (2009) Design a prototype solar dryer for drying sea cucumber. [USQ Project]

Design analysis of the bearing component of the hip joint prosthesis to improve distribution of forces and frictional wear.

Saika, K. (2016) Design analysis of the bearing component of the hip joint prosthesis to improve distribution of forces and frictional wear. [USQ Project]

Design and Development of a Fault Identifying Residual Current Device

Cowles, Drew (2020) Design and Development of a Fault Identifying Residual Current Device. [USQ Project]

Design and Evaluation of a Recirculating Aquaponic System

Whittering, Matthew (2020) Design and Evaluation of a Recirculating Aquaponic System. [USQ Project]

Design and Feasibility Study of Hydro Generators at Various Stages of Mains Water Supply

Warry, Nicholas (2021) Design and Feasibility Study of Hydro Generators at Various Stages of Mains Water Supply. [USQ Project]

Design and Manufacture of Scaled FSAE Chassis Using Generative Design and Topology Techniques

Drummond, Gordon Alexander (2022) Design and Manufacture of Scaled FSAE Chassis Using Generative Design and Topology Techniques. [USQ Project]

Design and Manufacture of a Mechanical Fatigue Testing Machine

Reimers, Anthony Steven (2010) Design and Manufacture of a Mechanical Fatigue Testing Machine. [USQ Project]

Design and Refinement of a Trailer Mounted Crane

Oon, Benjamin (2018) Design and Refinement of a Trailer Mounted Crane. [USQ Project]

Design and construction of a solar collector for teaching purposes

Grassick, Bruce (2006) Design and construction of a solar collector for teaching purposes. [USQ Project]

Design and develop virtual reality games utilising the 'anti‐gravity' arm support for stroke rehabilitation therapy

Fitzhenry, Ryan (2009) Design and develop virtual reality games utilising the 'anti‐gravity' arm support for stroke rehabilitation therapy. [USQ Project]

Design and development of a conveyor system for semiconductor industry

Lim, Doou Gie (2005) Design and development of a conveyor system for semiconductor industry. [USQ Project]

Design and development of a fibre optic microphone

Ikin, James (2013) Design and development of a fibre optic microphone. [USQ Project]

Design and development of a fibre-optic microphone

Kennedy, Isaac (2014) Design and development of a fibre-optic microphone. [USQ Project]

Design and development of a prototype, small plot research harvesting system

Schultz, Justin (2005) Design and development of a prototype, small plot research harvesting system. [USQ Project]

Design and development of a stair specific assistive aid

McNalty, Luke (2018) Design and development of a stair specific assistive aid. [USQ Project]

Design and documentation of Bairnsdale regional landfill - Cell 3 Johnston’s Road, Bairnsdale

Howarth, Rowan (2009) Design and documentation of Bairnsdale regional landfill - Cell 3 Johnston’s Road, Bairnsdale. [USQ Project]

Design and implementation of a microprocessor-controlled BMX start gate

Pijpers, Louis Kennedy (2008) Design and implementation of a microprocessor-controlled BMX start gate. [USQ Project]

Design and implementation of a network address translator

Beasley, K.-J. (2004) Design and implementation of a network address translator. [USQ Project]

Design and implementation of a remotely accesible inrush current testing package for power (distribution)transformers

Springall, Glenn (2008) Design and implementation of a remotely accesible inrush current testing package for power (distribution)transformers. [USQ Project]

Design and implementation of web-based keystroke analytics for user verification

Stephenson, Ryan (2016) Design and implementation of web-based keystroke analytics for user verification. [USQ Project]

Design and implentation of axial-flux permanent magnet machine for use in wind turbine applications

Weedon, Brent (2019) Design and implentation of axial-flux permanent magnet machine for use in wind turbine applications. [USQ Project]

Design and retrofit a compressed gas powered engine to a motor scooter

Walsh, Dan (2011) Design and retrofit a compressed gas powered engine to a motor scooter. [USQ Project]

Design and review of Millmerran coal handling plant

Kleynhans, Claudius Justus (2007) Design and review of Millmerran coal handling plant. [USQ Project]

Design and trial of an alternative option for suburban sewerage pump stations

Weston, Bill Thomas (2007) Design and trial of an alternative option for suburban sewerage pump stations. [USQ Project]

Design flood estimation based on GRADEX

Thomson, Philip (2017) Design flood estimation based on GRADEX. [USQ Project]

Design methodology evaluation: an investigation into the 'right' data for situational awareness of RTS-based tele-robotic systems in limited network environments

Border, Fraser (2016) Design methodology evaluation: an investigation into the 'right' data for situational awareness of RTS-based tele-robotic systems in limited network environments. [USQ Project]

Design of Multifunctional Cycle Frame

Kamdar, Obaid Ishrat (2018) Design of Multifunctional Cycle Frame. [USQ Project]

Design of a Brushless DC drive for unmanned aerial vehicles

Alharbi, Faisal (2019) Design of a Brushless DC drive for unmanned aerial vehicles. [USQ Project]

Design of a Human Powered Lift for Improved Safety when Working at Heights

Berry, Claire (2017) Design of a Human Powered Lift for Improved Safety when Working at Heights. [USQ Project]

Design of a Rig for Automated tissue discrimination in beef striploin during trimming operations

Cooney, Benjamin Owen (2020) Design of a Rig for Automated tissue discrimination in beef striploin during trimming operations. [USQ Project]

Design of a Small Wind Turbine for a Rural Pumping Application

Turner, Roland James (2010) Design of a Small Wind Turbine for a Rural Pumping Application. [USQ Project]

Design of a Small-Scale Pyrolysis Machine

Allen, Gregory (2022) Design of a Small-Scale Pyrolysis Machine. [USQ Project]

Design of a Smart Parking System for a Regional University Car Park

Smith, Michael (2018) Design of a Smart Parking System for a Regional University Car Park. [USQ Project]

Design of a frame/structure for a large wastewater treatment pond

Lewers, Glyn Alan (2010) Design of a frame/structure for a large wastewater treatment pond. [USQ Project]

Design of a high-shear geopolymer concrete mixer

Brown, Steven (2011) Design of a high-shear geopolymer concrete mixer. [USQ Project]

Design of a microclimate ventilation system

Yok Meng, Tan (2007) Design of a microclimate ventilation system. [USQ Project]

Design of a portable bushfire attenuation fence

Fell, Bradley (2016) Design of a portable bushfire attenuation fence. [USQ Project]

Design of a rear suspension configuration for a live axle race car to achieve optimum handling characteristics

Parkin, Damion Ian Harcourt (2007) Design of a rear suspension configuration for a live axle race car to achieve optimum handling characteristics. [USQ Project]

Design of a small wind turbine

Strong, Simon James (2008) Design of a small wind turbine. [USQ Project]

Design of a small wind turbine for a rural community in Australia

Perry, Ramon (2010) Design of a small wind turbine for a rural community in Australia. [USQ Project]

Design of a small wind turbine for electric power generation(1-5kW)

Kirsch, Joshua (2009) Design of a small wind turbine for electric power generation(1-5kW). [USQ Project]

Design of a truss bridge for low cost using structural topology optimisation

Sutcliffe, Wayne (2016) Design of a truss bridge for low cost using structural topology optimisation. [USQ Project]

Design of a wireless acquisition system for a digital stethoscope

Miller, Justin (2010) Design of a wireless acquisition system for a digital stethoscope. [USQ Project]

Design of aeration ploughing tool for poultry litter within shed to reduce odour generation

Hicks, Kevin Charles (2007) Design of aeration ploughing tool for poultry litter within shed to reduce odour generation. [USQ Project]

Design of an Ultra-Compact and Lightweight Wheelchair to Carry onto Passenger Planes

Heath, Michael (2021) Design of an Ultra-Compact and Lightweight Wheelchair to Carry onto Passenger Planes. [USQ Project]

Design of an industrial vehicle mounted filtration system for sewer cleaning

Mackay, Roydon (2018) Design of an industrial vehicle mounted filtration system for sewer cleaning. [USQ Project]

Design of an optical access engine and pneumatic head clamp

Martin, Gabriel (2016) Design of an optical access engine and pneumatic head clamp. [USQ Project]

Design of electro-hydraulic controlled poppet valves

Stewart, Robert (2007) Design of electro-hydraulic controlled poppet valves. [USQ Project]

Design of high accuracy wireless tilt sensor system for measuring rail sleeper movement in remote areas

Leslie, Andrew (2017) Design of high accuracy wireless tilt sensor system for measuring rail sleeper movement in remote areas. [USQ Project]

Design of high modulus asphalt overlay for concrete pavements

Lister, James (2016) Design of high modulus asphalt overlay for concrete pavements. [USQ Project]

Design of low-density high performing lattices

Shrestha, Ashesh (2022) Design of low-density high performing lattices. [USQ Project]

Design of remote laboratory experiments for integration into MEC2402 – stress analysis

Cox, Scott (2013) Design of remote laboratory experiments for integration into MEC2402 – stress analysis. [USQ Project]

Design of steel structures under fire

Gounder, Sangeevam (2005) Design of steel structures under fire. [USQ Project]

Design of structural glass fitting for seismic condition

Heng, Hern (2004) Design of structural glass fitting for seismic condition. [USQ Project]

Design optimisation of drag struts for seismic and wind loading in multi-storied structures

Reynolds, Brayden (2021) Design optimisation of drag struts for seismic and wind loading in multi-storied structures. [USQ Project]

Design review and analysis of Collinsville power station coal handling plant

Inderbitzin, Martin David (2006) Design review and analysis of Collinsville power station coal handling plant. [USQ Project]

Design, construction and operation of the floating roof tank

Kuan, Siew Yeng (2009) Design, construction and operation of the floating roof tank. [USQ Project]

Design, construction and performance of buildings foundations on soft clays in the Brisbane region

Daly, James (2010) Design, construction and performance of buildings foundations on soft clays in the Brisbane region. [USQ Project]

Detecting and Mapping Crop Stress using Sentinel Remote Sensing Imagery

Curtis, Timothy Davidson (2018) Detecting and Mapping Crop Stress using Sentinel Remote Sensing Imagery. [USQ Project]

Detection and analysis of disruption or discontinuities to Continuously Operating Reference Stations (CORS)

Egan, Joshua (2019) Detection and analysis of disruption or discontinuities to Continuously Operating Reference Stations (CORS). [USQ Project]

Detection of High Impedance Earth Faults Utilising Metering Assets

Bevis, Justin (2017) Detection of High Impedance Earth Faults Utilising Metering Assets. [USQ Project]

Deterioration of timber bridges using a Fault Tree Analysis

Wilson, Matthew (2016) Deterioration of timber bridges using a Fault Tree Analysis. [USQ Project]

Determination of a strategic planning approach for maintenance management of a major road network

Smith, Scott David (2012) Determination of a strategic planning approach for maintenance management of a major road network. [USQ Project]

Determination of insitu flexible moduli of modified pavement materials

Gordon, Craig (2005) Determination of insitu flexible moduli of modified pavement materials. [USQ Project]

Determination of mean high water mark within New South Wales

Clerke, Adam (2004) Determination of mean high water mark within New South Wales. [USQ Project]

Determination of property boundaries in NSW where monument movement has occurred

Howard, Damian John (2008) Determination of property boundaries in NSW where monument movement has occurred. [USQ Project]

Determining the Effectiveness of Vortex Generators with regards to Automotive Applications

Greenbank, Luke (2019) Determining the Effectiveness of Vortex Generators with regards to Automotive Applications. [USQ Project]

Develop a computer-based system to assess and exercise the arm movement of stroke patients

Assiriyage, Buddhi Nuwan Lanka (2009) Develop a computer-based system to assess and exercise the arm movement of stroke patients. [USQ Project]

Develop a framework for residential construction cost estimating in the Australian market

Dixon, Andrew Peter (2021) Develop a framework for residential construction cost estimating in the Australian market. [USQ Project]

Develop a policy to address the risk of rear-end crashes on high-speed rural road

Sondhi, Ankit (2017) Develop a policy to address the risk of rear-end crashes on high-speed rural road. [USQ Project]

Develop a system to monitor, analyse and report health data captured during exercise

Law, Boon Lee (2005) Develop a system to monitor, analyse and report health data captured during exercise. [USQ Project]

Develop process bus architecture for integrating sampled value IEDs

Napier, Luke W. P. (2014) Develop process bus architecture for integrating sampled value IEDs. [USQ Project]

Developing Road Asset Management Systems Utilising Spatial Technologies

Hicks, Ryan (2010) Developing Road Asset Management Systems Utilising Spatial Technologies. [USQ Project]

Developing a Benchmark for the Energy Efficiency of Residential Modular Housing Designs

Walker, Jessica (2021) Developing a Benchmark for the Energy Efficiency of Residential Modular Housing Designs. [USQ Project]

Developing a Maintenance Framework for Culverts

Stanton, Michael (2018) Developing a Maintenance Framework for Culverts. [USQ Project]

Developing a home-based functional application for an EEG-based brain computer interface

Alexis, Jeremie (2011) Developing a home-based functional application for an EEG-based brain computer interface. [USQ Project]

Developing a methodology using multi spectral remote sensing data for mapping vegetation change - a key variable in soil erosion mapping

Stimela, David Master (2005) Developing a methodology using multi spectral remote sensing data for mapping vegetation change - a key variable in soil erosion mapping. [USQ Project]

Developing a model for sustainable IT infrastructure in a rural setting in Northern India

Mohajer, Arman (2019) Developing a model for sustainable IT infrastructure in a rural setting in Northern India. [USQ Project]

Developing a model for the utilisation of auxiliary through lanes at signalised intersections

Browne, Nicholas Raymond (2019) Developing a model for the utilisation of auxiliary through lanes at signalised intersections. [USQ Project]

Developing a model to predict water main failures

Alanne, Glen (2008) Developing a model to predict water main failures. [USQ Project]

Developing a monitoring and control system for irrigation pumping units

Whittred, Daniel (2006) Developing a monitoring and control system for irrigation pumping units. [USQ Project]

Developing a numerical model for the design of sheet pile walls

Brits, Chane (2014) Developing a numerical model for the design of sheet pile walls. [USQ Project]

Developing a software interface between Dräger Winaccess API and influxDB Time series database

Blessing, Benn (2021) Developing a software interface between Dräger Winaccess API and influxDB Time series database. [USQ Project]

Developing an Asset Prioritization System for Hinchinbrook Shire Council’s Water and Sewerage Assets

Grazioli, Haydn (2020) Developing an Asset Prioritization System for Hinchinbrook Shire Council’s Water and Sewerage Assets. [USQ Project]

Developing an activity-based user interface for remote experimentation for science education in schools

Burtenshaw, Ryan (2015) Developing an activity-based user interface for remote experimentation for science education in schools. [USQ Project]

Developing physical model for bearing capacity and flow net applications

Jiankulprasert, Manop (2006) Developing physical model for bearing capacity and flow net applications. [USQ Project]

Development Of an Adaptive Control Mechanism to Enable Automated Irrigation on Gantry Robots

Ahlers, Corey (2022) Development Of an Adaptive Control Mechanism to Enable Automated Irrigation on Gantry Robots. [USQ Project]

Development and Performance Assessment of an Animal Monitoring System

Dutton, Simon (2017) Development and Performance Assessment of an Animal Monitoring System. [USQ Project]

Development and characterisation of an anechoic chamber

Woods, Andrew (2006) Development and characterisation of an anechoic chamber. [USQ Project]

Development and evaluation of a field mobility data capture system for condition assessment of assets

Nielson, Fiona Jane (2012) Development and evaluation of a field mobility data capture system for condition assessment of assets. [USQ Project]

Development and execution of asset criticality framework: a study of water and wastewater infrastructure at Toowoomba Regional Council

Olsen, Campbell (2015) Development and execution of asset criticality framework: a study of water and wastewater infrastructure at Toowoomba Regional Council. [USQ Project]

Development and testing of a portable GNSS network solution using the magellan propark3

Taylor, Scott (2008) Development and testing of a portable GNSS network solution using the magellan propark3. [USQ Project]

Development of Comparative Test Protocols for the Assessment of Autonomous Tractor Performance

Torrance, Logan (2020) Development of Comparative Test Protocols for the Assessment of Autonomous Tractor Performance. [USQ Project]

Development of Crash Modification Factors Using Selected Remedial Measures at Signalised Cross Intersections in Toowoomba

Somasundaraswaran, Aruthra (2017) Development of Crash Modification Factors Using Selected Remedial Measures at Signalised Cross Intersections in Toowoomba. [USQ Project]

Development of Low CO2 Durable Concrete Using Geopolymer and Related Chemically-Activated Cements

Knight, Richard L. (2017) Development of Low CO2 Durable Concrete Using Geopolymer and Related Chemically-Activated Cements. [USQ Project]

Development of Precast Concrete Boat Ramp Planks Reinforced with GFRP Bars

Cooper, Dean (2018) Development of Precast Concrete Boat Ramp Planks Reinforced with GFRP Bars. [USQ Project]

Development of Smart Sewer Pipeline Fault Detection Method using CCTV Inspection Data and Deep Learning

Sharpe, Kyal (2022) Development of Smart Sewer Pipeline Fault Detection Method using CCTV Inspection Data and Deep Learning. [USQ Project]

Development of a Raspberry Pi based, SDI-12 sensor environmental data logger

Coppock, James (2015) Development of a Raspberry Pi based, SDI-12 sensor environmental data logger. [USQ Project]

Development of a bridge asset management plan for Southern Downs Regional Council

Walter, Nathan Johan (2010) Development of a bridge asset management plan for Southern Downs Regional Council. [USQ Project]

Development of a coal wagon monitoring and control system

Roberts-Apps, Adam (2013) Development of a coal wagon monitoring and control system. [USQ Project]

Development of a computer simulation for scouring around bridge piers

Nankervis, Gary A. (2016) Development of a computer simulation for scouring around bridge piers. [USQ Project]

Development of a driver training simulator for use by stroke patients

O'Shannassy, Geoffrey Mark (2009) Development of a driver training simulator for use by stroke patients. [USQ Project]

Development of a drivetrain system for a formula SAE-A race car

Harber, Matthew (2005) Development of a drivetrain system for a formula SAE-A race car. [USQ Project]

Development of a high voltage DLA test apparatus

Backman, Shane A. (2009) Development of a high voltage DLA test apparatus. [USQ Project]

Development of a laser pointer mouse

Gibbons, Anthony (2010) Development of a laser pointer mouse. [USQ Project]

Development of a low cost GPS guidance system for use in agriculture

Hayllor, Nicholas (2006) Development of a low cost GPS guidance system for use in agriculture. [USQ Project]

Development of a low cost modular IEC61850 simulation system using touchscreen Raspberry Pi

Hutchinson, Evan John (2017) Development of a low cost modular IEC61850 simulation system using touchscreen Raspberry Pi. [USQ Project]

Development of a low cost, remotely accessible condition monitoring system for a power transformer

Nolan, Shane (2017) Development of a low cost, remotely accessible condition monitoring system for a power transformer. [USQ Project]

Development of a mechanical testing system to investigate road deformation

Domrow, Ryan (2005) Development of a mechanical testing system to investigate road deformation. [USQ Project]

Development of a mobile vehicle classification system

Otto, Colin W. (2006) Development of a mobile vehicle classification system. [USQ Project]

Development of a noisy vehicle detection system

Curtis, Benjamin Phillip (2006) Development of a noisy vehicle detection system. [USQ Project]

Development of a portable high-wall lighting system

McKie, Scott (2007) Development of a portable high-wall lighting system. [USQ Project]

Development of a pump efficiency monitor for use in cotton irrigation

Szabo, Phillip (2013) Development of a pump efficiency monitor for use in cotton irrigation. [USQ Project]

Development of a remote laboratory system for external university students

Birkbeck, A. (2007) Development of a remote laboratory system for external university students. [USQ Project]

Development of a road safety plan for Scenic Rim Regional Council

McKenzie, Seren (2014) Development of a road safety plan for Scenic Rim Regional Council. [USQ Project]

Development of a sustainable footpath material using recycled road profile, natural soils and PolyCom stabilising aid

Jackson, Scott (2016) Development of a sustainable footpath material using recycled road profile, natural soils and PolyCom stabilising aid. [USQ Project]

Development of a tool for estimating net emissions of greenhouse gases at farm and sub-catchment level

Sekhesa, Calvin Cally (2006) Development of a tool for estimating net emissions of greenhouse gases at farm and sub-catchment level. [USQ Project]

Development of a tournament management system

Thomas, Benjamin Brett (2010) Development of a tournament management system. [USQ Project]

Development of advanced SWER models for the Ergon Energy network

Nobbs, Rebecca (2012) Development of advanced SWER models for the Ergon Energy network. [USQ Project]

Development of advanced turbulent combustion models

Pichlis, Matt V. (2014) Development of advanced turbulent combustion models. [USQ Project]

Development of an Asphalt Pavement Quality System

Power, Jay (2018) Development of an Asphalt Pavement Quality System. [USQ Project]

Development of an Asset Prioritisation Framework for Gympie Regional Council’s Water and Sewerage Assets

Wood, Timothy (2019) Development of an Asset Prioritisation Framework for Gympie Regional Council’s Water and Sewerage Assets. [USQ Project]

Development of an Improved Concrete Defect Object Detection Method for Edge AI Inference Technology

Tomac, Beau (2022) Development of an Improved Concrete Defect Object Detection Method for Edge AI Inference Technology. [USQ Project]

Development of an Innovative Flooring System for Residential and Light Industrial Buildings

Reid, Amber Hope (2021) Development of an Innovative Flooring System for Residential and Light Industrial Buildings. [USQ Project]

Development of an artificial neural network (ANN) for predicting tribological properties of kenaf fibre reinforced epoxy composites (KFRE)

Griinke, Tyler John (2013) Development of an artificial neural network (ANN) for predicting tribological properties of kenaf fibre reinforced epoxy composites (KFRE). [USQ Project]

Development of an asset maintenance program for Darwin City Council

Douglas, Nadine Sarah (2009) Development of an asset maintenance program for Darwin City Council. [USQ Project]

Development of an asset management strategy for the city of Mandurah WA

Gunton, Michael J. (2006) Development of an asset management strategy for the city of Mandurah WA. [USQ Project]

Development of an electronically controlled thruster

Jesshope, Douglas James (2012) Development of an electronically controlled thruster. [USQ Project]

Development of an unmanned aerial vehicle for use during disaster situations

Wilson, Bede (2010) Development of an unmanned aerial vehicle for use during disaster situations. [USQ Project]

Development of ductile and ultra-high performance engineered cementitious composite (ECC) with lightweight microsphere additive

Hesse, Gareth Grant (2014) Development of ductile and ultra-high performance engineered cementitious composite (ECC) with lightweight microsphere additive. [USQ Project]

Development of infiltration factors for the estimation of urban separate wastewater flow in the Gippsland water catchment

Elvy, Michelle Catherine (2004) Development of infiltration factors for the estimation of urban separate wastewater flow in the Gippsland water catchment. [USQ Project]

Development of methods to monitor continuously operating reference station antenna stability

Camplin, Tony (2009) Development of methods to monitor continuously operating reference station antenna stability. [USQ Project]

Development of quality assurance procedures for cadastral surveying using GPS technology

Worrall, Andrew (2007) Development of quality assurance procedures for cadastral surveying using GPS technology. [USQ Project]

Development of stormwater asset management plan for local council

Priest, Andrew James (2016) Development of stormwater asset management plan for local council. [USQ Project]

Development of the drivetrain including brakes and wheels for the Formula SAE-A vehicle

Little, Jeremy (2004) Development of the drivetrain including brakes and wheels for the Formula SAE-A vehicle. [USQ Project]

Development stages of a road management strategy suitable to the Burdekin shire

Lazzarini, Sarah-Jane (2016) Development stages of a road management strategy suitable to the Burdekin shire. [USQ Project]

Dielectric, thermal and mechanical properties of sawdust reinforced epoxy composites post-cured in microwaves

Tai, Ping (2010) Dielectric, thermal and mechanical properties of sawdust reinforced epoxy composites post-cured in microwaves. [USQ Project]

Differential Interferometric Synthetic - Aperture Radar (DInSAR) for disused mine subsidence monitoring and detection

Benn, Joshua (2018) Differential Interferometric Synthetic - Aperture Radar (DInSAR) for disused mine subsidence monitoring and detection. [USQ Project]

Digital fabrication with collaborative robotics

Middenway, Jayden (2022) Digital fabrication with collaborative robotics. [USQ Project]

Digitally Fabricated Reduction Drive for Low-Cost Robotics Applications

Gooneratne, Shaun (2021) Digitally Fabricated Reduction Drive for Low-Cost Robotics Applications. [USQ Project]

Direct Volume Computation Using UAV Point Cloud Data & A Known DTM

Gibbs, Alexander (2018) Direct Volume Computation Using UAV Point Cloud Data & A Known DTM. [USQ Project]

Directional microphone array for security applications

Cobb, Benjamin Jon (2006) Directional microphone array for security applications. [USQ Project]

Disposable stormwater sampling device for water quality hazard detection

Triaca, Bryan F (2015) Disposable stormwater sampling device for water quality hazard detection. [USQ Project]

Diversion of stormwater first flush: an alternative method of managing pollution to urban waterways

Tunnah, Patrick (2015) Diversion of stormwater first flush: an alternative method of managing pollution to urban waterways. [USQ Project]

Domestic lawn mower blade noise and influence of machine geometry

Martin, Nathanael John (2013) Domestic lawn mower blade noise and influence of machine geometry. [USQ Project]

Drag Force Analysis of Vehicle Roof Accessories

Broad, Jacob (2019) Drag Force Analysis of Vehicle Roof Accessories. [USQ Project]

Drag reduction and wake mitigation in wind turbines using riblet microstructures

McEvoy, Daniel J. (2020) Drag reduction and wake mitigation in wind turbines using riblet microstructures. [USQ Project]

Dragline maintenance engineering

Jones, Bruce Thomas (2007) Dragline maintenance engineering. [USQ Project]

Driver fatigue issues on State Highway 1 south of Whangarei - within region 1 of New Zealand

Govender, Gansen (2006) Driver fatigue issues on State Highway 1 south of Whangarei - within region 1 of New Zealand. [USQ Project]

Driving problems encountered in the UAE by newly arrived expatriates and tourists

Martin, Joseph A. (2010) Driving problems encountered in the UAE by newly arrived expatriates and tourists. [USQ Project]

Drone Swarm Simulation for Tracking High Capability Malicious Drone

Carter, Joshua (2021) Drone Swarm Simulation for Tracking High Capability Malicious Drone. [USQ Project]

Dumper derailment investigation and development of custom check rail

Dobson, Lindsay (2016) Dumper derailment investigation and development of custom check rail. [USQ Project]

Durability of hybrid concrete-FRP bridge decks

Prasser, Mark (2005) Durability of hybrid concrete-FRP bridge decks. [USQ Project]

Dynamic characterisation of cellular cores and sandwich beams

O'Leary, Haydn (2012) Dynamic characterisation of cellular cores and sandwich beams. [USQ Project]

Dynamic conductor ratings: annealing properties of homogenous conductors across varying climatic conditions

Murphy, Ryan (2015) Dynamic conductor ratings: annealing properties of homogenous conductors across varying climatic conditions. [USQ Project]

Dynamic response testing method of damage detection in fibre composite structures

Kerr, James (2015) Dynamic response testing method of damage detection in fibre composite structures. [USQ Project]

Dynamic tracking of a race car

King, Joshua (2006) Dynamic tracking of a race car. [USQ Project]

E-tutorials for electrical engineering courses using Dreamweaver

Mustafa, Muhammad Zaki Bin (2006) E-tutorials for electrical engineering courses using Dreamweaver. [USQ Project]

Early Detection and Prevention of Catastrophic Failures of Industrial Engines

Dashchinskiy, Mikhail (2017) Early Detection and Prevention of Catastrophic Failures of Industrial Engines. [USQ Project]

Earthing Systems and Earth Fault Protection in Power System Distribution Network

Narayan, Sanjay (2019) Earthing Systems and Earth Fault Protection in Power System Distribution Network. [USQ Project]

Echo cancellation in VoIP using digital adaptive filters

Kmita, Shane (2011) Echo cancellation in VoIP using digital adaptive filters. [USQ Project]

Economics of photovoltaic water pumping system in Sultanate of Oman

Al-Busaidi, Ibrahim A. (2005) Economics of photovoltaic water pumping system in Sultanate of Oman. [USQ Project]

Educational robot design

Bishop, Matthew Darrell (2007) Educational robot design. [USQ Project]

Effect of Concrete Compressive Strength on the Behaviour of GFRP Reinforced Hollow Concrete Columns

Oosthuizen, Alexandra L. (2018) Effect of Concrete Compressive Strength on the Behaviour of GFRP Reinforced Hollow Concrete Columns. [USQ Project]

Effect of Thermal Boundary Layer Below Water Surfaces on Evaporation

King, Alexander (2020) Effect of Thermal Boundary Layer Below Water Surfaces on Evaporation. [USQ Project]

Effect of admixtures on the use of short fibres in structural concrete to enhance mechanical properties.

Cheong, Fong Chin (2004) Effect of admixtures on the use of short fibres in structural concrete to enhance mechanical properties. [USQ Project]

Effect of distributed photovoltaic embedded generation on the electricity distribution network

Hourigan, Karen (2016) Effect of distributed photovoltaic embedded generation on the electricity distribution network. [USQ Project]

Effect of environmental surroundings on accuracy and precision of total station measurements

Ford, Joseph (2015) Effect of environmental surroundings on accuracy and precision of total station measurements. [USQ Project]

Effect of epoxy repairing on girders shear strengthened with external post tensioning

Alam, Murshedul (2004) Effect of epoxy repairing on girders shear strengthened with external post tensioning. [USQ Project]

Effect of existing cracks in shear strengthening of concrete girders with external post tensioning

Luther, Steven (2005) Effect of existing cracks in shear strengthening of concrete girders with external post tensioning. [USQ Project]

Effect of existing cracks in shear strengthening of concrete girders with external post-tensioning

Whittaker, Todd (2005) Effect of existing cracks in shear strengthening of concrete girders with external post-tensioning. [USQ Project]

Effect of fibre content on compressive and flexural properties of coconut fibre reinforced epoxy composites

Alwazzan, Essa (2018) Effect of fibre content on compressive and flexural properties of coconut fibre reinforced epoxy composites. [USQ Project]

Effect of intersection angle on a time-gap based intersection sight distance model

Cole, David Michael (2018) Effect of intersection angle on a time-gap based intersection sight distance model. [USQ Project]

Effect of irrigation management on nitrate movement under a lettuce crop

Althaus, Kimberley (2009) Effect of irrigation management on nitrate movement under a lettuce crop. [USQ Project]

Effect of time interval variations on RTK derived distances

Bein, Vincent (2015) Effect of time interval variations on RTK derived distances. [USQ Project]

Effect of time interval variations on network RTK in a high multipath environment

McDonnell, James (2016) Effect of time interval variations on network RTK in a high multipath environment. [USQ Project]

Effect of variations in load profile on power transformer cyclic ratings

Atkinson, Andrew Peter (2014) Effect of variations in load profile on power transformer cyclic ratings. [USQ Project]

Effective Corporate Social Responsibility for Australian SMEs (Small to Medium-Sized Enterprises) in the Building & Construction Industry

King, Mitchell (2020) Effective Corporate Social Responsibility for Australian SMEs (Small to Medium-Sized Enterprises) in the Building & Construction Industry. [USQ Project]

Effective Road Pavement Reconstruction in Fraser Coast Region QLD

Chapman-Vagg, Kaz (2020) Effective Road Pavement Reconstruction in Fraser Coast Region QLD. [USQ Project]

Effective road pavement design for expansive soils in Ipswich

Caunce, Catherine May (2010) Effective road pavement design for expansive soils in Ipswich. [USQ Project]

Effective road pavement rehabilitation design for local government roads within the Sunshine Coast region

Sanders, Thomas (2014) Effective road pavement rehabilitation design for local government roads within the Sunshine Coast region. [USQ Project]

Effective techniques for reducing the effects of skilled labour shortages in the Australian construction sector

McLaughlin, Ayrton (2022) Effective techniques for reducing the effects of skilled labour shortages in the Australian construction sector. [USQ Project]

Effectiveness of Bitumen Emulsion as a Stabilisation Agent in Recycled Sealed Rural Roads

Baker, Kurt (2017) Effectiveness of Bitumen Emulsion as a Stabilisation Agent in Recycled Sealed Rural Roads. [USQ Project]

Effectiveness of Variable Speed Limit Control Devices in Queensland

Everett, Lucas (2017) Effectiveness of Variable Speed Limit Control Devices in Queensland. [USQ Project]

Effectiveness of earth mat when jointing high voltage underground cables (33 kV and above)

Siddans, Ryan (2021) Effectiveness of earth mat when jointing high voltage underground cables (33 kV and above). [USQ Project]

Effectiveness of lime stabilisation on reactive soils for main roads

Wilson, Paul (2011) Effectiveness of lime stabilisation on reactive soils for main roads. [USQ Project]

Effectiveness of real time kinematic global navigation satellite system suveying (RTK GNSS)

Hetherington, Chris (2008) Effectiveness of real time kinematic global navigation satellite system suveying (RTK GNSS). [USQ Project]

Effectiveness of the Wide Centreline Treatment on two-way rural roads

Cuckson, Christopher (2016) Effectiveness of the Wide Centreline Treatment on two-way rural roads. [USQ Project]

Effects and controls of lateral refraction in underground coal mines

Mohr, Logan (2007) Effects and controls of lateral refraction in underground coal mines. [USQ Project]

Effects of Chemically Treated Recycled Water on the Setting Process and Overall Behaviour of Concrete Beams

Lilley, Andrew (2018) Effects of Chemically Treated Recycled Water on the Setting Process and Overall Behaviour of Concrete Beams. [USQ Project]

Effects of Climate Change and Land Use on Rainfall and Management of Flooding in an Urban Coastal Catchment

Way, Erin (2019) Effects of Climate Change and Land Use on Rainfall and Management of Flooding in an Urban Coastal Catchment. [USQ Project]

Effects of elevated temperature and simulated environmental conditions on the properties of epoxy based polymer resin

Timms, Ashlii (2015) Effects of elevated temperature and simulated environmental conditions on the properties of epoxy based polymer resin. [USQ Project]

Effects of fibres and curing temperature on geopolymer concrete

Reed, Mark Edward (2012) Effects of fibres and curing temperature on geopolymer concrete. [USQ Project]

Effects of joining systems and sheathing on the in-plane shear behaviour of modular composite wall systems

Priebbenow, Aidan (2021) Effects of joining systems and sheathing on the in-plane shear behaviour of modular composite wall systems. [USQ Project]

Effects of on-board HHO and water injection in a diesel generator

Cameron, Rick (2012) Effects of on-board HHO and water injection in a diesel generator. [USQ Project]

Effects of on-site detention systems on urban drainage catchments

Cuell, Jonathan (2016) Effects of on-site detention systems on urban drainage catchments. [USQ Project]

Effects of proposed bioretention system on existing waterbird habitat

Kohn, Nicholas (2013) Effects of proposed bioretention system on existing waterbird habitat. [USQ Project]

Effects of sewage effluent on soil constraints in the Tamworth Region of New South Wales

Cameron, Adrian (2020) Effects of sewage effluent on soil constraints in the Tamworth Region of New South Wales. [USQ Project]

Effects of transformer inrush current

Patel, Kunal J. (2013) Effects of transformer inrush current. [USQ Project]

Effects of varying ground water levels on laterally loaded bored piles

Evans, Michael (2018) Effects of varying ground water levels on laterally loaded bored piles. [USQ Project]

Effluent Water Reuse for Townsville

Govan, Joel Blake (2017) Effluent Water Reuse for Townsville. [USQ Project]

Electrical Control Systems and Invertor Development for a 10kW Wind Turbine

Paton, Bradley (2020) Electrical Control Systems and Invertor Development for a 10kW Wind Turbine. [USQ Project]

Electrical training package for mining area C

McKay, Michael (2007) Electrical training package for mining area C. [USQ Project]

Electro muscle stimulus system for wasted muscle rehabilitation

Dobson, David (2013) Electro muscle stimulus system for wasted muscle rehabilitation. [USQ Project]

Electro-thermal modelling of large PV array degradation for thermography and peak power conditioning monitoring

Adcock, Glen (2016) Electro-thermal modelling of large PV array degradation for thermography and peak power conditioning monitoring. [USQ Project]

Electromagnetic linear actuator - design, manufacture and control

Grimm, Justin John (2009) Electromagnetic linear actuator - design, manufacture and control. [USQ Project]

Electron Tube performance monitoring via remote means

Murray, Adam (2018) Electron Tube performance monitoring via remote means. [USQ Project]

Electronic GateMate

Morris, Steven (2017) Electronic GateMate. [USQ Project]

Electronic systems for the USQ formula SAE racer

Molloy, Reuben (2005) Electronic systems for the USQ formula SAE racer. [USQ Project]

Electronics and the environment - Singapore perspective

Teo, Kian Peng (2005) Electronics and the environment - Singapore perspective. [USQ Project]

Elevated highways – a solution to Brisbane’s traffic congestion?

Delahunty, Bruce (2011) Elevated highways – a solution to Brisbane’s traffic congestion? [USQ Project]

Embedded IP for small devices

Brown, Simon Neil (2005) Embedded IP for small devices. [USQ Project]

Embedded control system for biogas digesters

Sullivan, T. (2007) Embedded control system for biogas digesters. [USQ Project]

Enabling voice calls via a wireless broadband router

Jones, Adam (2009) Enabling voice calls via a wireless broadband router. [USQ Project]

Encapsulated Phase Change Material for Temperature Control and Verification of Solar Disinfection Treatment

Selezneva, Natalie (2018) Encapsulated Phase Change Material for Temperature Control and Verification of Solar Disinfection Treatment. [USQ Project]

Energy & carbon audit of the Scenic Rim Regional Council

Gauld, Jason Andrew (2016) Energy & carbon audit of the Scenic Rim Regional Council. [USQ Project]

Energy Efficiency Through Home Automation

Roulstone, Scott (2018) Energy Efficiency Through Home Automation. [USQ Project]

Energy Management & Automated Analytics

Santarossa, Matthew (2015) Energy Management & Automated Analytics. [USQ Project]

Energy Performance Analysis of a Six Green Star Building

Angove, Trent (2020) Energy Performance Analysis of a Six Green Star Building. [USQ Project]

Energy Return on Investment (EROI) of an Australian Wind Farm

Haywood, Chad (2020) Energy Return on Investment (EROI) of an Australian Wind Farm. [USQ Project]

Energy efficiency improvement in coal fired power plant through operational optimisation

Lang, Jason (2015) Energy efficiency improvement in coal fired power plant through operational optimisation. [USQ Project]

Engine optimisation and performance characteristics for a formula SAE race car

Plank, Melinda (2005) Engine optimisation and performance characteristics for a formula SAE race car. [USQ Project]

Engineering correlations for the characterisation of reactive soil behaviour for use in road design

Reynolds, Peter William (2013) Engineering correlations for the characterisation of reactive soil behaviour for use in road design. [USQ Project]

Engineering design of a disposable water bottle for an Australian market

Lovett, Jy (2013) Engineering design of a disposable water bottle for an Australian market. [USQ Project]

Environmentally friendly natural fibre composites with Qld. based vegetable oils

Manthey, Nathan William (2009) Environmentally friendly natural fibre composites with Qld. based vegetable oils. [USQ Project]

Environmentally friendly natural waste materials for use in civil structures

Bailey, Thomas Sullivan (2010) Environmentally friendly natural waste materials for use in civil structures. [USQ Project]

Epoxidised resins from natural renewable resources

Cooney, Tyson (2009) Epoxidised resins from natural renewable resources. [USQ Project]

Error resilient H.264 coded video transmission over wireless channels

Wise, Timothy Glen (2009) Error resilient H.264 coded video transmission over wireless channels. [USQ Project]

Error resilient JPEG2000 transmission over wireless fading channels

Clemence, Andrew John (2008) Error resilient JPEG2000 transmission over wireless fading channels. [USQ Project]

Establishing a mix design procedure for Geopolymer concrete

Wilson, Aaron P (2015) Establishing a mix design procedure for Geopolymer concrete. [USQ Project]

Establishment of a priority infrastructure plan for the major road network in Laidley Shire

Bartlett, Jeremy Adam (2006) Establishment of a priority infrastructure plan for the major road network in Laidley Shire. [USQ Project]

Estimating rippability of Brisbane Tuff using quantitative and qualitative characteristics and a modified approach to an existing rippability rating method

Schuh, Stephen Andrew (2007) Estimating rippability of Brisbane Tuff using quantitative and qualitative characteristics and a modified approach to an existing rippability rating method. [USQ Project]

Estimating the Input Voltage and Current of Transformers from Output Side Measurements

Clark, Peter (2018) Estimating the Input Voltage and Current of Transformers from Output Side Measurements. [USQ Project]

Estimating the State of Charge of the Nickel Iron Battery

Parry, Ian Bruce (2017) Estimating the State of Charge of the Nickel Iron Battery. [USQ Project]

Estimation of Peak Design Discharges within the Mackay Region

Brigg, Hayden (2017) Estimation of Peak Design Discharges within the Mackay Region. [USQ Project]

Estimation of peak flow in Queensland using Quantile Regression Technique and ARR 2019

Walker, Samuel (2019) Estimation of peak flow in Queensland using Quantile Regression Technique and ARR 2019. [USQ Project]

Evaluating comparative performance of various shaped bridge piers: experimental investigation of sediment transport and scouring

Gibson, David Eric (2010) Evaluating comparative performance of various shaped bridge piers: experimental investigation of sediment transport and scouring. [USQ Project]

Evaluating the differences and accuracies between GNSS applications using PPP

Ismail, Wafeek (2015) Evaluating the differences and accuracies between GNSS applications using PPP. [USQ Project]

Evaluating the effectiveness of Intelligent Transport Systems at reducing speeds through roadwork sites in Australia

Davey, Wade (2015) Evaluating the effectiveness of Intelligent Transport Systems at reducing speeds through roadwork sites in Australia. [USQ Project]

Evaluating the impact of new technology on construction project performance, methodologies and productivity: An insight into the forthcoming era of change projected for the construction industry

Thimios, Jace (2018) Evaluating the impact of new technology on construction project performance, methodologies and productivity: An insight into the forthcoming era of change projected for the construction industry. [USQ Project]

Evaluating the potential to impose partial root zone drying (PRD) on clay soils in commercial cotton production systems

McKeering, Loretta M. (2004) Evaluating the potential to impose partial root zone drying (PRD) on clay soils in commercial cotton production systems. [USQ Project]

Evaluation Of A Self-Built, Low-Cost, RTK UAV System To Produce Digital Elevation Models

Byrne, Mitchell John (2019) Evaluation Of A Self-Built, Low-Cost, RTK UAV System To Produce Digital Elevation Models. [USQ Project]

Evaluation impact strength on particulate reinforced (25% and 33%) vinyl ester composite cured under microwave conditions

Ang, Soh Fong (2004) Evaluation impact strength on particulate reinforced (25% and 33%) vinyl ester composite cured under microwave conditions. [USQ Project]

Evaluation of Ashtech ProMark2 survey system

Shaw, Neil Geoffrey (2006) Evaluation of Ashtech ProMark2 survey system. [USQ Project]

Evaluation of DTM Accuracy Based on Different Flying Heights of UAV on a Uniform Surface

Wickramasinghe, Manod (2017) Evaluation of DTM Accuracy Based on Different Flying Heights of UAV on a Uniform Surface. [USQ Project]

Evaluation of EverFE software for designing Australian concrete pavements

Tobler, Jake P (2015) Evaluation of EverFE software for designing Australian concrete pavements. [USQ Project]

Evaluation of Issues Affecting Stabilised Granular Pavements

Perkins, Shaun (2022) Evaluation of Issues Affecting Stabilised Granular Pavements. [USQ Project]

Evaluation of Issues in Using Advanced and Sustainable Engineering Materials

Tan, Jacob (2019) Evaluation of Issues in Using Advanced and Sustainable Engineering Materials. [USQ Project]

Evaluation of Signalisation as a Treatment for Roundabouts

Towers, Haley (2021) Evaluation of Signalisation as a Treatment for Roundabouts. [USQ Project]

Evaluation of Trimble Active Targets with an obstructed line of sight

Marriott, Phillip (2017) Evaluation of Trimble Active Targets with an obstructed line of sight. [USQ Project]

Evaluation of UAV vs Conventional Surveying methods in locating Waste Material at a Landfill site

O'Callaghan, Jack Maurice (2018) Evaluation of UAV vs Conventional Surveying methods in locating Waste Material at a Landfill site. [USQ Project]

Evaluation of Unmanned Aerial Vehicle (UAV) Data Accuracy for the Surveying Profession

Tingle, Leigh Robert James (2017) Evaluation of Unmanned Aerial Vehicle (UAV) Data Accuracy for the Surveying Profession. [USQ Project]

Evaluation of VRS-RTK GPS latency in a dynamic environment

Inglis, Rientz (2006) Evaluation of VRS-RTK GPS latency in a dynamic environment. [USQ Project]

Evaluation of commercial EMF software

McGuinness, Sean J. (2006) Evaluation of commercial EMF software. [USQ Project]

Evaluation of control for the adjustment of the digital cadastral data base (DCDB)

Fenwick, Wayne (2005) Evaluation of control for the adjustment of the digital cadastral data base (DCDB). [USQ Project]

Evaluation of engineering solutions to protect Cairns from coastal inundation due to storm surge and sea level rise

O'Donoghue, Grant (2022) Evaluation of engineering solutions to protect Cairns from coastal inundation due to storm surge and sea level rise. [USQ Project]

Evaluation of funding justification of low volume roads in North Queensland

Mackenzie, Christopher Frank (2004) Evaluation of funding justification of low volume roads in North Queensland. [USQ Project]

Evaluation of geocomposite reinforced pavement for suitability in Queensland roads

Schneekloth, Jenelle (2022) Evaluation of geocomposite reinforced pavement for suitability in Queensland roads. [USQ Project]

Evaluation of issues for small and medium-sized enterprises in the use of advanced and green engineering materials

Wright, Christopher John Brockway (2014) Evaluation of issues for small and medium-sized enterprises in the use of advanced and green engineering materials. [USQ Project]

Evaluation of photogrammetric measurements obtained using imaging rovers and imaging theodoli

Evans, Jesse Troy (2015) Evaluation of photogrammetric measurements obtained using imaging rovers and imaging theodoli. [USQ Project]

Evaluation of precise point positioning services

O'Sullivan, Daniel (2014) Evaluation of precise point positioning services. [USQ Project]

Evaluation of remotely piloted aircraft in surveying applications

Metcalfe, Patrick James (2013) Evaluation of remotely piloted aircraft in surveying applications. [USQ Project]

Evaluation of roads safety processes currently used in Queensland

Sebby, Melcuam (2013) Evaluation of roads safety processes currently used in Queensland. [USQ Project]

Evaluation of signalised intersections in NSW with right turn filters

Farrugia, Daniel (2015) Evaluation of signalised intersections in NSW with right turn filters. [USQ Project]

Evaluation of strength characteristics of recycled bituminous pavement materials

Asghar, Muhammad Athar Aqeel (2015) Evaluation of strength characteristics of recycled bituminous pavement materials. [USQ Project]

Evaluation of the Effect of Vegetation Sky Obstructions and Multipath on AUSPOS and Trimble CenterPoint RTX Post-Processing

Lester, Trenton (2018) Evaluation of the Effect of Vegetation Sky Obstructions and Multipath on AUSPOS and Trimble CenterPoint RTX Post-Processing. [USQ Project]

Evaluation of the Emergency Vehicle Priority System on the Sunshine Coast

Truasheim, Nathanael (2017) Evaluation of the Emergency Vehicle Priority System on the Sunshine Coast. [USQ Project]

Evaluation of the Irrigation Hydraulics Assessor (IHA) as a Pipeline Behaviour Estimation Tool

Ginakis, Philip (2018) Evaluation of the Irrigation Hydraulics Assessor (IHA) as a Pipeline Behaviour Estimation Tool. [USQ Project]

Evaluation of the Performance of Recycled Concrete Aggregate in Fresh Concrete for Manufacturing Fence Posts

Hollingworth, Leigh (2021) Evaluation of the Performance of Recycled Concrete Aggregate in Fresh Concrete for Manufacturing Fence Posts. [USQ Project]

Evaluation of the Queensland streets concept in residential streets in Logan City

Tucker, Neil John (2006) Evaluation of the Queensland streets concept in residential streets in Logan City. [USQ Project]

Evaluation of the Suitability of Fibre Composites for Road Bridges

Jadan, Dima (2021) Evaluation of the Suitability of Fibre Composites for Road Bridges. [USQ Project]

Evaluation of the capacity of signalised two lane roundabouts

Taylor, Jarrod Lee (2012) Evaluation of the capacity of signalised two lane roundabouts. [USQ Project]

Evaluation of the operational characteristics of heavy vehicles at signalised intersections in Queensland

Zeller, Karl (2011) Evaluation of the operational characteristics of heavy vehicles at signalised intersections in Queensland. [USQ Project]

Evaluation of the performance of different global satellite navigation systems (GNSS) for Australian GNSS users

Hautsalo, Kari (2013) Evaluation of the performance of different global satellite navigation systems (GNSS) for Australian GNSS users. [USQ Project]

Evaluation of the performance of web-based GNSS post processing systems

Cleaver, Benjamin L. (2013) Evaluation of the performance of web-based GNSS post processing systems. [USQ Project]

Evaluation of the strength characteristics of recycled bituminous pavement materials

Neumann, Philip (2013) Evaluation of the strength characteristics of recycled bituminous pavement materials. [USQ Project]

Evaluation of the use of safety barriers on roundabouts

James, Jake (2016) Evaluation of the use of safety barriers on roundabouts. [USQ Project]

Evaluation of wet scrubber systems

Yap, Lee Jiuan (2005) Evaluation of wet scrubber systems. [USQ Project]

Evolution of stadiums: a study in the design and construction of ancient and modern stadia

Jenaway, Brett (2013) Evolution of stadiums: a study in the design and construction of ancient and modern stadia. [USQ Project]

Evolutionary structural optimization for multi component structural systems

Chuah, Yew Pin (2005) Evolutionary structural optimization for multi component structural systems. [USQ Project]

Examining the Hansen Global Forest Change (2000 - 2014) dataset within an Australian local government area

Miller, James (2016) Examining the Hansen Global Forest Change (2000 - 2014) dataset within an Australian local government area. [USQ Project]

Examining the Re-entry of a Tumbling Object During Freefall

Hartmann, Gregory (2021) Examining the Re-entry of a Tumbling Object During Freefall. [USQ Project]

Exoskeleton Arm Control system: Design, Construct and Evaluate

Mitchell-Donnelly, Jonathan (2018) Exoskeleton Arm Control system: Design, Construct and Evaluate. [USQ Project]

Experimental Analysis of the Performance and Emissions of Waste Cooking Oil Biodiesel with ABE Additive as an Alternative to Mineral Diesel

Lawler, Mitchell (2017) Experimental Analysis of the Performance and Emissions of Waste Cooking Oil Biodiesel with ABE Additive as an Alternative to Mineral Diesel. [USQ Project]

Experimental investigation into the uplift capacity of ground anchors in sand

Kennedy, Jotham Ariel (2010) Experimental investigation into the uplift capacity of ground anchors in sand. [USQ Project]

Experimental investigation on the alkali silica reaction effect on concrete strength degradation

Rosas, Angela Beatriz Rodriques (2014) Experimental investigation on the alkali silica reaction effect on concrete strength degradation. [USQ Project]

Experimental study of the mechanical properties of particulate reinforced composite

Lee, Kuang Sheng (2006) Experimental study of the mechanical properties of particulate reinforced composite. [USQ Project]

Exploration of evaporation mitigation measurement techniques

Maskall, Jonathon (2015) Exploration of evaporation mitigation measurement techniques. [USQ Project]

Exploring the application of closed form solutions in geotechnical problems

Eaton, Timothy (2013) Exploring the application of closed form solutions in geotechnical problems. [USQ Project]

Extracting spatial information from aerial video imagery for monitoring riparian areas

Boitshoko, Daniel (2007) Extracting spatial information from aerial video imagery for monitoring riparian areas. [USQ Project]

Extraction of ECGs for twin pregnancies

Jarvinen, Jarkko (2016) Extraction of ECGs for twin pregnancies. [USQ Project]

Eye of the swarm: real-time analysis of factors affecting dynamic UAV pursuit of a moving target

Arnold, C. (2020) Eye of the swarm: real-time analysis of factors affecting dynamic UAV pursuit of a moving target. [USQ Project]

FEA analysis of tractor axle modification

Sambamo, Richard (2014) FEA analysis of tractor axle modification. [USQ Project]

Fabric Filter Shaker Drive Crank Assembly Operation Analysis

Martin, John (2017) Fabric Filter Shaker Drive Crank Assembly Operation Analysis. [USQ Project]

Fabrication and design of a Stirling Engine powered by hydrogen

Sheehan, Michael (2022) Fabrication and design of a Stirling Engine powered by hydrogen. [USQ Project]

Factors in the selection of contractors for engineering works

Clarke, Lauren Elizabeth (2007) Factors in the selection of contractors for engineering works. [USQ Project]

Failure analysis of total hip replacement and the feasibility of fibre composites as an alternative material

Sadanala, Swapan (2015) Failure analysis of total hip replacement and the feasibility of fibre composites as an alternative material. [USQ Project]

Fast-response piezoresistive pressure transducers for thermofluids experiments

Hockings, Peter (2004) Fast-response piezoresistive pressure transducers for thermofluids experiments. [USQ Project]

Fatal crashes at T-junctions within New South Wales

Blades, Tyson (2017) Fatal crashes at T-junctions within New South Wales. [USQ Project]

Fatigue Analysis of Tower Crane Grillage Wall Bracket Connection

Lincoln, Mitchell (2018) Fatigue Analysis of Tower Crane Grillage Wall Bracket Connection. [USQ Project]

Fault Analysis of Vision System on Autonomous Blast Hole Drills

Veivers, Shannon (2018) Fault Analysis of Vision System on Autonomous Blast Hole Drills. [USQ Project]

Feasibility Analysis of a Novel Method for Bovine Carcase Fat Thickness Estimation

Mueller, Karl (2018) Feasibility Analysis of a Novel Method for Bovine Carcase Fat Thickness Estimation. [USQ Project]

Feasibility Assessment of Using Water Storage Sources to Improve the Efficiency of Air-Conditioning Systems

Osgood, Michael (2020) Feasibility Assessment of Using Water Storage Sources to Improve the Efficiency of Air-Conditioning Systems. [USQ Project]

Feasibility Study to Upgrade DOL Driven Pumps to Variable Speed Drives

Chambers, Aaron (2021) Feasibility Study to Upgrade DOL Driven Pumps to Variable Speed Drives. [USQ Project]

Feasibility assessment of low cost stereo computer vision in clay target shooting coaching

Anderson, Oliver Josh (2015) Feasibility assessment of low cost stereo computer vision in clay target shooting coaching. [USQ Project]

Feasibility of Developing a Licensing Scheme for Fijian Contractors and Sub-Contractors

Sami, Sanil V. (2018) Feasibility of Developing a Licensing Scheme for Fijian Contractors and Sub-Contractors. [USQ Project]

Feasibility of Fibre-Reinforced Polymer (FRP) Composites for Engine Pushrods

Cain, Joshua (2021) Feasibility of Fibre-Reinforced Polymer (FRP) Composites for Engine Pushrods. [USQ Project]

Feasibility of Remote Earth Monitoring for SWER Systems

Ferrari, Amy (2019) Feasibility of Remote Earth Monitoring for SWER Systems. [USQ Project]

Feasibility of improved traffic flow on Cohoe Street, Toowoomba by intersection improvements

Pearson, Kelly (2015) Feasibility of improved traffic flow on Cohoe Street, Toowoomba by intersection improvements. [USQ Project]

Feasibility of improving cycle infrastructure in Fortitude Valley Brisbane

Blundstone, Geoffrey (2019) Feasibility of improving cycle infrastructure in Fortitude Valley Brisbane. [USQ Project]

Feasibility of polymer coated femoral stems and pre-cooling for improved triboperformance and stress distribution

Walsh, Justin (2020) Feasibility of polymer coated femoral stems and pre-cooling for improved triboperformance and stress distribution. [USQ Project]

Feasibility of using Thermoelectric Generators to Improve Fuel Efficiency in Existing In-service Vehicles

O'Keeffe, Myles E. (2022) Feasibility of using Thermoelectric Generators to Improve Fuel Efficiency in Existing In-service Vehicles. [USQ Project]

Feasibility on Vertical Column Gravity Separation of Class O Fluids

Brian, Ashley (2021) Feasibility on Vertical Column Gravity Separation of Class O Fluids. [USQ Project]

Feasibility study: into the design, effectiveness & limitations of installing raingardens within an inner urban environment

Vincec, Paul Michael (2008) Feasibility study: into the design, effectiveness & limitations of installing raingardens within an inner urban environment. [USQ Project]

Field deployable shower unit by dual membrane filtration

Tinning, Eugene (2006) Field deployable shower unit by dual membrane filtration. [USQ Project]

Finite element analysis of a composite bridge deck

Klein, Lindsay Edward (2006) Finite element analysis of a composite bridge deck. [USQ Project]

Finite element analysis of a hybrid natural fibre sandwich wall panel loaded with in-plane shear

Collier, Shane Michael (2015) Finite element analysis of a hybrid natural fibre sandwich wall panel loaded with in-plane shear. [USQ Project]

Finite element analysis of fillet welded joint

Mohammed, Rafiqul Islam (2015) Finite element analysis of fillet welded joint. [USQ Project]

Finite element modelling of a sustainable hybrid natural fibre sandwich panel under bending

Farahbakhsh, Iman (2016) Finite element modelling of a sustainable hybrid natural fibre sandwich panel under bending. [USQ Project]

Finite element simulation of a Sustainable Hybrid Sandwich Panel under bending using Strand7

Maguire, Brett (2017) Finite element simulation of a Sustainable Hybrid Sandwich Panel under bending using Strand7. [USQ Project]

Finite volume solution of the unsteady free surface flow equations

Gould, Adam Mark (2010) Finite volume solution of the unsteady free surface flow equations. [USQ Project]

Flexural Behaviour of Precast Concrete Slabs Reinforced with Hollow Composite Systems

Xeros, Alastair G. (2017) Flexural Behaviour of Precast Concrete Slabs Reinforced with Hollow Composite Systems. [USQ Project]

Flexural Investigation and Design of Stressed-Skin Panels With an Autoclaved Aerated Concrete (AAC) Core

Matthews, Brendan Shane (2019) Flexural Investigation and Design of Stressed-Skin Panels With an Autoclaved Aerated Concrete (AAC) Core. [USQ Project]

Flexural behaviour of Graphene-reinforced concrete beams

Maruping, Pako Omogolo (2019) Flexural behaviour of Graphene-reinforced concrete beams. [USQ Project]

Flexural behaviour of sandwich panels under elevated temperature

Surendar, Swetha (2014) Flexural behaviour of sandwich panels under elevated temperature. [USQ Project]

Flexural properties of sisal fibre/epoxy Composites

Alqahtani, Rafi Ali (2014) Flexural properties of sisal fibre/epoxy Composites. [USQ Project]

Flexural strength SLG-reinforced phenolic composites cured in microwaves

Sawchuk, Mike (2008) Flexural strength SLG-reinforced phenolic composites cured in microwaves. [USQ Project]

Flexural strength of three types of glass powder reinforced vinyl ester composites

Huq, Rezwanul (2009) Flexural strength of three types of glass powder reinforced vinyl ester composites. [USQ Project]

FoES Formula SAE-A space frame chassis design

Baker, Christopher Scott (2004) FoES Formula SAE-A space frame chassis design. [USQ Project]

Foam bitumen stabilisation in north west NSW

Wilton, Joshua (2014) Foam bitumen stabilisation in north west NSW. [USQ Project]

Forensic investigation of pavement failures

Smith, Richard Boyd (2004) Forensic investigation of pavement failures. [USQ Project]

Forest road decommissioning: modelling the effect on hydrological connectivity

Eastaugh, Christopher S. (2006) Forest road decommissioning: modelling the effect on hydrological connectivity. [USQ Project]

Formula SAE: design overview and project management

Armstrong, John (2004) Formula SAE: design overview and project management. [USQ Project]

Fractal video compression

Kamali, Khalid (2005) Fractal video compression. [USQ Project]

Fracture Toughness of Hybrid Hierarchical Honeycombs

Whiting, Ella (2021) Fracture Toughness of Hybrid Hierarchical Honeycombs. [USQ Project]

Fracture analysis of vinyl ester composites cured under microwave conditions

Chan, Wooi Lieh (2006) Fracture analysis of vinyl ester composites cured under microwave conditions. [USQ Project]

Fracture analysis of vinyl ester composites under microwave condition

Lee, Kwan Shing (2005) Fracture analysis of vinyl ester composites under microwave condition. [USQ Project]

Fracture analysis of vinyl ester composites under microwave condition

Tsang, Shing Hin (2004) Fracture analysis of vinyl ester composites under microwave condition. [USQ Project]

Fracture behaviour of fibre/polymer composites based on synthetic and natural fibres

Altamar, Rashed (2014) Fracture behaviour of fibre/polymer composites based on synthetic and natural fibres. [USQ Project]

Fracture toughness of glass powder reinforced vinyl ester resin

Korowa, Geoffrey (2009) Fracture toughness of glass powder reinforced vinyl ester resin. [USQ Project]

Fracture toughness of glass powder reinforced vinyl ester resin post cured in a conventional oven using flexural test

Mautoga, Marau (2011) Fracture toughness of glass powder reinforced vinyl ester resin post cured in a conventional oven using flexural test. [USQ Project]

Fracture toughness of phenolic resins composite by using saw dust as filler of percentage by weight

Yavu, Isei Ledua (2008) Fracture toughness of phenolic resins composite by using saw dust as filler of percentage by weight. [USQ Project]

Freight transport following an extreme rainfall event

Tierney, Daniel Robert (2006) Freight transport following an extreme rainfall event. [USQ Project]

Frequency synthesizer requirements for future cellular radio systems (06-026)

Woo, Mun Kit (2006) Frequency synthesizer requirements for future cellular radio systems (06-026). [USQ Project]

Functional design report: Corry’s road sewerage augmentation

McLinden, Joshua (2016) Functional design report: Corry’s road sewerage augmentation. [USQ Project]

Functional observer for glucose regulation

Mendis, Marina Shanil (2008) Functional observer for glucose regulation. [USQ Project]

Future Trend of Retaining Walls in South East Queensland

Stewart, Simon Hugh (2017) Future Trend of Retaining Walls in South East Queensland. [USQ Project]

Future management of survey infrastructure within NSW

Kocoski, Micheal (2017) Future management of survey infrastructure within NSW. [USQ Project]

Future public transport options for Toowoomba for the next twenty years

Freeman, Belinda (2016) Future public transport options for Toowoomba for the next twenty years. [USQ Project]

Fuzzy Solar Hot Water Heater Controller

Ogilvie-O'Neil, David (2017) Fuzzy Solar Hot Water Heater Controller. [USQ Project]

GIS based cadastral planning

Masters, Jason Scott (2004) GIS based cadastral planning. [USQ Project]

GIS for house hunters: a case study in Toowoomba

Jin, Tao (2005) GIS for house hunters: a case study in Toowoomba. [USQ Project]

GSM Based Automatic Digital Metering for Power and Gas Utilities

AL Majdali, Musaed M. SH. M. SH. (2017) GSM Based Automatic Digital Metering for Power and Gas Utilities. [USQ Project]

Geodesic dome structural analysis and design

Peng, Zhuohao (2016) Geodesic dome structural analysis and design. [USQ Project]

Geometry Refinement of Venturi Flow Meters to Reduce Energy Losses in Water and Air Applications

Wells, Keith (2022) Geometry Refinement of Venturi Flow Meters to Reduce Energy Losses in Water and Air Applications. [USQ Project]

Geotechnical stability analysis using student versions of FLAC, PLAXIS and SLOPE/W

Serra, Michael Peter (2013) Geotechnical stability analysis using student versions of FLAC, PLAXIS and SLOPE/W. [USQ Project]

Gladstone Power Station demineralised water plant asset strategy development

Philips, Cameron Charles MacGregor (2010) Gladstone Power Station demineralised water plant asset strategy development. [USQ Project]

Global navigation satellite systems for geodetic network surveys

Curran, Liam Patrick (2008) Global navigation satellite systems for geodetic network surveys. [USQ Project]

Great artesian basin (GAB) water cooling systems for municipal supplies

Guse, Hayden Alexander (2014) Great artesian basin (GAB) water cooling systems for municipal supplies. [USQ Project]

Green IT - dynamic network topologies

Costantini, Daniel (2015) Green IT - dynamic network topologies. [USQ Project]

Greywater reuse in urban areas

Wiltshire, Mark (2005) Greywater reuse in urban areas. [USQ Project]

Grid-Connected Solar Photovoltaic System

NG, Benjamin Woon Soon (2010) Grid-Connected Solar Photovoltaic System. [USQ Project]

Griffin Road drainage diversion – feasibility study

Burton, Bruce (2009) Griffin Road drainage diversion – feasibility study. [USQ Project]

Grinding mill conceptual design developments

Commons-Fidge, Ian G. (2010) Grinding mill conceptual design developments. [USQ Project]

Groundwater recharge prediction for broad scale irrigation modelling: a case study in the M.I.A-main canal irrigated areas

Makireddi, Surya (2014) Groundwater recharge prediction for broad scale irrigation modelling: a case study in the M.I.A-main canal irrigated areas. [USQ Project]

Groundwater recharge prediction for broadscale irrigation modelling: a case study in MIA-Main Canal irrigated areas

Makireddi, Surya (2014) Groundwater recharge prediction for broadscale irrigation modelling: a case study in MIA-Main Canal irrigated areas. [USQ Project]

Guardian Angel: Reactive Wearables and Clothing

Phillips, James (2018) Guardian Angel: Reactive Wearables and Clothing. [USQ Project]

Guidelines for Condition Monitoring of Vacuum Circuit Breakers at Distribution Voltages

Wyper, Mitchell Wayne Robert (2017) Guidelines for Condition Monitoring of Vacuum Circuit Breakers at Distribution Voltages. [USQ Project]

Guidelines for the use of electronic survey field notes and CAD computation files as legal records

McCosker, Daniel Patrick (2006) Guidelines for the use of electronic survey field notes and CAD computation files as legal records. [USQ Project]

Harmony Analysis in A'Capella Singing

Oliver, Jarred (2019) Harmony Analysis in A'Capella Singing. [USQ Project]

Heat Exchanger Performance and Optimisation

Clarke, Terrence (2021) Heat Exchanger Performance and Optimisation. [USQ Project]

Heat transfer measurements of a re-entry capsule using fast response thermocouples

Roache, Brody (2004) Heat transfer measurements of a re-entry capsule using fast response thermocouples. [USQ Project]

Helicopter Vibration Monitoring During Patient Transport

Canning, Justin (2017) Helicopter Vibration Monitoring During Patient Transport. [USQ Project]

Herbicides wash off from cane trash by rainfall

Dang, Aaditi (2012) Herbicides wash off from cane trash by rainfall. [USQ Project]

High impedance earth fault modelling

Coggan, Robert Walter (2010) High impedance earth fault modelling. [USQ Project]

High speed rail in Australia: a case study for a Sydney- Wollongong link

Newman, Matthew (2014) High speed rail in Australia: a case study for a Sydney- Wollongong link. [USQ Project]

High voltage earthing system testing - an investigation into the effects of test lead coupling on test results

Brandis, Cameron (2009) High voltage earthing system testing - an investigation into the effects of test lead coupling on test results. [USQ Project]

High volume drone collision avoidance with cooperative formation flying

Tomkinson, Christopher (2020) High volume drone collision avoidance with cooperative formation flying. [USQ Project]

High-strength structural concrete with recycled aggregates

Ngo, Nelson, Shing Chai (2004) High-strength structural concrete with recycled aggregates. [USQ Project]

Historical identification and mapping

Pena, Mario de la (2005) Historical identification and mapping. [USQ Project]

Hoist system for small boat stacker

Lear, Foster Robert (2008) Hoist system for small boat stacker. [USQ Project]

Home Based Solar and Battery Optimisation

Becker, Peter (2019) Home Based Solar and Battery Optimisation. [USQ Project]

Home based solar power generation, storage and localised grids

Shephard, Steven (2016) Home based solar power generation, storage and localised grids. [USQ Project]

Home based solar power generation, storage, and localised energy grids

Hook, Warren (2018) Home based solar power generation, storage, and localised energy grids. [USQ Project]

Hot Graphite Models in Axisymmetric Configurations for Re-entry Simulation in Wind Tunnels

Snuderl, Leon (2017) Hot Graphite Models in Axisymmetric Configurations for Re-entry Simulation in Wind Tunnels. [USQ Project]

Housing affordability in Roma: can progress be made within the regulatory and policy framework?

Wilson, Wayne (2011) Housing affordability in Roma: can progress be made within the regulatory and policy framework? [USQ Project]

How Building Information Modelling software (BIM) is being used in the Architectural and Engineering (AE) industry and how the use of this software is impacted by the AE industries own understanding of BIM - A South East Queensland (SEQ) Perspective

van Neuren, Craig S. (2020) How Building Information Modelling software (BIM) is being used in the Architectural and Engineering (AE) industry and how the use of this software is impacted by the AE industries own understanding of BIM - A South East Queensland (SEQ) Perspective. [USQ Project]

How effective is microalgae treatment of different wastewaters for simultaneous nutrient removal and lipid production for bio-fuel?

Pufelski, Nadine (2010) How effective is microalgae treatment of different wastewaters for simultaneous nutrient removal and lipid production for bio-fuel? [USQ Project]

How engineers become CEOs - implications for education and training

Coaker, Warren (2007) How engineers become CEOs - implications for education and training. [USQ Project]

How might an underground working environment effect laser scan data when assessing Joint Roughness Coefficient, and is it feasible to use a mobile platform?

Braddon, Megan (2019) How might an underground working environment effect laser scan data when assessing Joint Roughness Coefficient, and is it feasible to use a mobile platform? [USQ Project]

How to establish map projections to facilitate the use of GPS on ground-based surveys

Pickford, Jeffrey (2008) How to establish map projections to facilitate the use of GPS on ground-based surveys. [USQ Project]

How to mitigate the effects of scour on bridge piers through the use of combined countermeasures

Raleigh, Andrew (2015) How to mitigate the effects of scour on bridge piers through the use of combined countermeasures. [USQ Project]

Human Comfort - CFD Modelling to Provide Energy Efficient Air-Conditioning in a Modern Office

Higgs, Callan (2017) Human Comfort - CFD Modelling to Provide Energy Efficient Air-Conditioning in a Modern Office. [USQ Project]

Human electromagnetic radiation exposure

Paech, Simon (2008) Human electromagnetic radiation exposure. [USQ Project]

Human interface device (HID) keyboard application for android

Houweling, F. (2013) Human interface device (HID) keyboard application for android. [USQ Project]

Hybrid wind solar power study for remote rail communications sites

Potts, Jayde (2018) Hybrid wind solar power study for remote rail communications sites. [USQ Project]

Hydraulic Investigation into the Practical Applicability of the ISLEX Smart Siphon

Leggat, Nicholas Aiden (2017) Hydraulic Investigation into the Practical Applicability of the ISLEX Smart Siphon. [USQ Project]

Hydraulic conductivity response of soils to synthetic laundry greywater

Sankowsky, Brendan (2009) Hydraulic conductivity response of soils to synthetic laundry greywater. [USQ Project]

Hydraulic modelling of the water distribution system of Tavua-Vatukoula, Fiji

Senokonoko, Kemueli Bainivalu (2014) Hydraulic modelling of the water distribution system of Tavua-Vatukoula, Fiji. [USQ Project]

Hydraulic properties of Toowoomba soils for laundry water reuse

Sivongxay, Amphone (2005) Hydraulic properties of Toowoomba soils for laundry water reuse. [USQ Project]

Hydroelectric generators for third world countries

Burton-Ree, Nicholas (2013) Hydroelectric generators for third world countries. [USQ Project]

Hydrologic Catchment Modelling to Supplement Potable Water Supply in Central Western NSW

Bell, Wayne (2021) Hydrologic Catchment Modelling to Supplement Potable Water Supply in Central Western NSW. [USQ Project]

Hyper-spectral imaging for airborne meteorite detection

Moorhouse, David (2014) Hyper-spectral imaging for airborne meteorite detection. [USQ Project]

Hypersonic Nozzle Characterisation Using CFD

Webb, Alister (2020) Hypersonic Nozzle Characterisation Using CFD. [USQ Project]

Hypersonic rocket manoeuvre in the TUSQ facility

Fowler, Michael John (2014) Hypersonic rocket manoeuvre in the TUSQ facility. [USQ Project]

IV infusion pump training emulator

Osbourne, Daniel B. (2012) IV infusion pump training emulator. [USQ Project]

Identification mapping and evaluation of timber bridges in the Wide Bay District

Barney, Debra Kaye (2004) Identification mapping and evaluation of timber bridges in the Wide Bay District. [USQ Project]

Identification of Infiltration within Albury Sewerage Infrastructure

Buckle, James (2017) Identification of Infiltration within Albury Sewerage Infrastructure. [USQ Project]

Identification of Kangaroos using Machine Vision

Sehmish-Lahey, Laura (2018) Identification of Kangaroos using Machine Vision. [USQ Project]

Identification of cement manufacturing raw materials using machine vision

Notley, Lindsay (2016) Identification of cement manufacturing raw materials using machine vision. [USQ Project]

Identification of the effectiveness of various commercial COVID -19 Masks using ANSYS software

Jawad, Poonam (2021) Identification of the effectiveness of various commercial COVID -19 Masks using ANSYS software. [USQ Project]

Identification of the spectral signature of noxious weed St. John’s wort and development of a tracking methodology via remote sensing

Collins, Matthew (2016) Identification of the spectral signature of noxious weed St. John’s wort and development of a tracking methodology via remote sensing. [USQ Project]

Identifying Abnormalities in Indoor Environments using Obstacle Detection Programming

Jennings, Nicholas (2021) Identifying Abnormalities in Indoor Environments using Obstacle Detection Programming. [USQ Project]

Identifying Rights, Obligations and Restrictions on Freehold Land in Queensland

Hoskins, Paul Francis (2018) Identifying Rights, Obligations and Restrictions on Freehold Land in Queensland. [USQ Project]

Identifying and implementing best practice models for management of unsealed road networks in NSW Local Government to achieve sustainability

Rath, Jaymes (2022) Identifying and implementing best practice models for management of unsealed road networks in NSW Local Government to achieve sustainability. [USQ Project]

Identifying best practice pavement design for an unsealed road network to achieve sustainability improvements

Smith, Benjamin James (2016) Identifying best practice pavement design for an unsealed road network to achieve sustainability improvements. [USQ Project]

Identifying the Types and Causes of Construction Defects in Multi-Unit Dwellings

Denman, Michael (2022) Identifying the Types and Causes of Construction Defects in Multi-Unit Dwellings. [USQ Project]

Impact of Harmonics from 12-pulse Converter-Fed DC Drives

Nyakureba, Mike (2018) Impact of Harmonics from 12-pulse Converter-Fed DC Drives. [USQ Project]

Impact of Large-Scale Solar Energy Penetration on the Electricity Network With a View of Replacing Synchronous Generators

Mpofu, Mkululi (2019) Impact of Large-Scale Solar Energy Penetration on the Electricity Network With a View of Replacing Synchronous Generators. [USQ Project]

Impact of demand-side management on substations

Gray, David Thomas Chalmer (2004) Impact of demand-side management on substations. [USQ Project]

Impact of tailings subsidence on rehabilitated landform erosional stability

Houghton, Richard (2009) Impact of tailings subsidence on rehabilitated landform erosional stability. [USQ Project]

Impact response of flat and perforated plate

Janusaitis, Stephen (2006) Impact response of flat and perforated plate. [USQ Project]

Impacts of Implementing High Efficiency Sediment Basins for Land Development Sediment Control within the Canberra Region

Beff, Susan (2018) Impacts of Implementing High Efficiency Sediment Basins for Land Development Sediment Control within the Canberra Region. [USQ Project]

Impedance Spectroscopy Meter for Batteries Meter Development and Testing on Ni-Fe Batteries

Hampson, Kevin (2017) Impedance Spectroscopy Meter for Batteries Meter Development and Testing on Ni-Fe Batteries. [USQ Project]

Impediments to identifying freehold land rights in N.S.W.

Temple, Christopher Jed (2007) Impediments to identifying freehold land rights in N.S.W. [USQ Project]

Implementation of JPEG-2000 standard for the next generation image compression

Loh, Chew Ping (2004) Implementation of JPEG-2000 standard for the next generation image compression. [USQ Project]

Implementation of a condition monitoring program for high voltage (HV) assets for the Santos GLNG Project

Lanigan, Christopher John (2013) Implementation of a condition monitoring program for high voltage (HV) assets for the Santos GLNG Project. [USQ Project]

Implementation of electronic measurement and recording of strata title field notes

Morris, Mike (2011) Implementation of electronic measurement and recording of strata title field notes. [USQ Project]

Implementation of negative phase sequence protection in the high voltage distribution network

Taylor, Scott (2016) Implementation of negative phase sequence protection in the high voltage distribution network. [USQ Project]

Implementing Industry Best Practice Alarm Management

Snelgar, Daniel (2015) Implementing Industry Best Practice Alarm Management. [USQ Project]

Implementing a Combined Structural Design and Detailing Workflow to Improve Project Outcomes

Bien, Robert (2018) Implementing a Combined Structural Design and Detailing Workflow to Improve Project Outcomes. [USQ Project]

Implications for engineers aspiring to become top-senior managers

Chow, Kai Wen (2007) Implications for engineers aspiring to become top-senior managers. [USQ Project]

Improve waste recycling potential through the conversion of normal household waste into biogas

Cooper, Mark Dennis (2010) Improve waste recycling potential through the conversion of normal household waste into biogas. [USQ Project]

Improved Mixing Closure for Multiple Mapping Conditioning Turbulent Combustion Model

Bontch-Osmolovskaia, Daria (2018) Improved Mixing Closure for Multiple Mapping Conditioning Turbulent Combustion Model. [USQ Project]

Improved cooling system for USQ's small scale icing wind tunnel

Wall, Rhyan (2015) Improved cooling system for USQ's small scale icing wind tunnel. [USQ Project]

Improved theory for the design of high-speed roundabouts to suit heavy vehicles

Tomarchio, Mark Daniel (2019) Improved theory for the design of high-speed roundabouts to suit heavy vehicles. [USQ Project]

Improved transfer chute design using DEM software to predict material flow behaviour

Mason, Alex (2016) Improved transfer chute design using DEM software to predict material flow behaviour. [USQ Project]

Improvement and performance of pavement gravels used by Toowoomba Regional Council for unsealed roads

Hanson, Scott (2010) Improvement and performance of pavement gravels used by Toowoomba Regional Council for unsealed roads. [USQ Project]

Improvement of hydrocarbon dew point determination via gas chromatography

Grygorcewicz, Jon-Paul Frederick (2010) Improvement of hydrocarbon dew point determination via gas chromatography. [USQ Project]

Improvement of production of double disc planters

Reeson, Andrew (2016) Improvement of production of double disc planters. [USQ Project]

Improvements to the calibration of Electronic Distance Measurement Equipment (EDME)

Pescod, Rhys (2015) Improvements to the calibration of Electronic Distance Measurement Equipment (EDME). [USQ Project]

Improving Queensland speed zoning practices

Williams, Alexander (2016) Improving Queensland speed zoning practices. [USQ Project]

Improving accuracy of rainwater tank hydrologic yield estimation across Queensland

Taylor, Benjamin Allan (2009) Improving accuracy of rainwater tank hydrologic yield estimation across Queensland. [USQ Project]

Improving biodiesel combustion using commercial diesel treatment additive

Alwazzan, Ali (2018) Improving biodiesel combustion using commercial diesel treatment additive. [USQ Project]

Improving caravan design by modelling of airflow

Briskey, Kyle Gary (2013) Improving caravan design by modelling of airflow. [USQ Project]

Improving caravan design by modelling of crosswind

De Leon, Adrian (2016) Improving caravan design by modelling of crosswind. [USQ Project]

Improving design standards for passing lanes on rural highways in Queensland

Mear, Benjamin (2016) Improving design standards for passing lanes on rural highways in Queensland. [USQ Project]

Improving electricity network utilisation with distributed energy storage systems

Sunzu, Tony Bonaventure (2014) Improving electricity network utilisation with distributed energy storage systems. [USQ Project]

Improving infiltration modelling for crusting soils

Leckie, Cameron (2019) Improving infiltration modelling for crusting soils. [USQ Project]

Improving information management & project proposal automation at Data#3

Stevenson, Cameron Laurence (2008) Improving information management & project proposal automation at Data#3. [USQ Project]

Improving project delivery: through the application of project management techniques

Molloy, Aron (2016) Improving project delivery: through the application of project management techniques. [USQ Project]

Improving surfing conditions in conjunction with coastal erosion protection

Crawford, Peter Alexander (2013) Improving surfing conditions in conjunction with coastal erosion protection. [USQ Project]

Improving the aerodynamic force measurement system for the USQ gun tunnel

Davidson, Timothy (2004) Improving the aerodynamic force measurement system for the USQ gun tunnel. [USQ Project]

Improving the performance of an industrial cold room

Looi Zi Qing, Sean (2007) Improving the performance of an industrial cold room. [USQ Project]

Improving the performance of the Nanango wastewater treatment plant

Turnbull, Jon (2011) Improving the performance of the Nanango wastewater treatment plant. [USQ Project]

Improving the transition of a successful tender from estimating to project management phases

Richardson, Joseph (2016) Improving the transition of a successful tender from estimating to project management phases. [USQ Project]

In situ testing of hot water system sacrificial anodes

Bowkett, Norman (2017) In situ testing of hot water system sacrificial anodes. [USQ Project]

In-vehicle display system

Costa, Michael (2005) In-vehicle display system. [USQ Project]

Independent Evaluation of the Leica GS18 T Tilt-Compensated GNSS RTK Rover

Smouha, Jonathan (2019) Independent Evaluation of the Leica GS18 T Tilt-Compensated GNSS RTK Rover. [USQ Project]

Induced draft (ID) fan lubrication system design review and proposed modification upgrade at Callide C Power Station

Baker, Stuart (2010) Induced draft (ID) fan lubrication system design review and proposed modification upgrade at Callide C Power Station. [USQ Project]

Industrial Automation Human-Machine Interface Design for Disabled Workers

Gibbs, Adam (2018) Industrial Automation Human-Machine Interface Design for Disabled Workers. [USQ Project]

Industrial wireless network mapping

Lumsden, Glenn (2015) Industrial wireless network mapping. [USQ Project]

Infant transport incubator cold performance

Vadalma, Anthony (2014) Infant transport incubator cold performance. [USQ Project]

Infill Development Impact on the Capacity of Regional Drainage Networks

Whitby, Mathew (2019) Infill Development Impact on the Capacity of Regional Drainage Networks. [USQ Project]

Inflow/infiltration strategic management project

Wady, Ivan (2014) Inflow/infiltration strategic management project. [USQ Project]

Influence of Water-Grout Ratio and Curing Time on Pull-Out Load of Rock Bolt Systems

Williams, Sally (2020) Influence of Water-Grout Ratio and Curing Time on Pull-Out Load of Rock Bolt Systems. [USQ Project]

Influence of ageing process on the adhesive wear behaviour of kenaf fibre reinforced epoxy composites

Alshammari, Fahad M. M. S. N. S. (2017) Influence of ageing process on the adhesive wear behaviour of kenaf fibre reinforced epoxy composites. [USQ Project]

Influence of fibre length on mechanical properties of natural and synthetic fibres reinforced epoxy composites

Albasheer, Yaqoup (2017) Influence of fibre length on mechanical properties of natural and synthetic fibres reinforced epoxy composites. [USQ Project]

Influence of physical road characteristics on road crashes

Jensen, Jason W. (2004) Influence of physical road characteristics on road crashes. [USQ Project]

Initial design of a high-performance and cost-effective mountain bike

Case, Jiel (2011) Initial design of a high-performance and cost-effective mountain bike. [USQ Project]

Inspection of power transmission lines using UAVs

Ellis, N. (2013) Inspection of power transmission lines using UAVs. [USQ Project]

Inspiring high precision dam water depth measurement with novel 'bubbler’ designs

Donohue, Rachael Michelle (2008) Inspiring high precision dam water depth measurement with novel 'bubbler’ designs. [USQ Project]

Instrumentation to track the southern elephant seal

Deith, Peter (2005) Instrumentation to track the southern elephant seal. [USQ Project]

Insulated container testing & rating system development

Vever, Thierry-Jacques Patrick (2015) Insulated container testing & rating system development. [USQ Project]

Integrating scheduling with quality to minimise defects in construction

Tippett-Whiteman, Austin (2016) Integrating scheduling with quality to minimise defects in construction. [USQ Project]

Integration effectiveness between engineering teams on complex defence programs

Walker, Sam (2016) Integration effectiveness between engineering teams on complex defence programs. [USQ Project]

Integration of Trimble V10 Imaging Rover on terrestrial survey

Dlodlo, Nkomozombango (2018) Integration of Trimble V10 Imaging Rover on terrestrial survey. [USQ Project]

Integration of Trimble V10 imaging rover with R10 GNSS receiver for data collection under dense tree canopies

Thompson, Zaine (2016) Integration of Trimble V10 imaging rover with R10 GNSS receiver for data collection under dense tree canopies. [USQ Project]

Integration of a Light Rail Transit with Autonomous (driverless) Vehicles

Chigondo, Brian (2017) Integration of a Light Rail Transit with Autonomous (driverless) Vehicles. [USQ Project]

Intelligent building automation system

Ler, Eng Loo (2006) Intelligent building automation system. [USQ Project]

Interaction of recycled concrete and geogrid reinforcement material 14m high reinforced earth wall

Gibson, Duane Nikalia (2008) Interaction of recycled concrete and geogrid reinforcement material 14m high reinforced earth wall. [USQ Project]

Interactive map associated with tourism

Newman, Anthony (2007) Interactive map associated with tourism. [USQ Project]

Interactive web-based signal processing tutor

Toh, Pei Ling (2004) Interactive web-based signal processing tutor. [USQ Project]

Internal model control (IMC) of a fruit drying system

Geddes, Scott A. (2006) Internal model control (IMC) of a fruit drying system. [USQ Project]

Intrusion and anomaly detection in computer networks using signal processing approaches

Jordan, Timothy J. (2010) Intrusion and anomaly detection in computer networks using signal processing approaches. [USQ Project]

Investigate the best percentage by weight of glass powder, as fillers in phenolic resins by using tensile tests

Wu, Chao di (2009) Investigate the best percentage by weight of glass powder, as fillers in phenolic resins by using tensile tests. [USQ Project]

Investigate the best percentage by weight of glass powder, as fillers in phenolic resins using tensile tests

Cecil, Travis (2008) Investigate the best percentage by weight of glass powder, as fillers in phenolic resins using tensile tests. [USQ Project]

Investigate the effect of harmonics on high voltage regulators

Charan, Vikash Sikendra (2018) Investigate the effect of harmonics on high voltage regulators. [USQ Project]

Investigate the use of thermal protection for underground cables in Ergon Engery's electricity network

Gianoulis, Cosmas (2006) Investigate the use of thermal protection for underground cables in Ergon Engery's electricity network. [USQ Project]

Investigates the effect of surface shear on pavements near road intersection

Kemp, Ryan (2011) Investigates the effect of surface shear on pavements near road intersection. [USQ Project]

Investigating Scour Behaviour Around Culverts Using a Validated Numerical Model

Sheriff, Bradley (2018) Investigating Scour Behaviour Around Culverts Using a Validated Numerical Model. [USQ Project]

Investigating Urban Stormwater Collection for Potable use; a Feasibility Study for Gloucester, NSW

Kellner, Nicholas (2021) Investigating Urban Stormwater Collection for Potable use; a Feasibility Study for Gloucester, NSW. [USQ Project]

Investigating Wave Rotor Performance Characteristics and Design for Air Pumping Applications

Channer, Liam (2019) Investigating Wave Rotor Performance Characteristics and Design for Air Pumping Applications. [USQ Project]

Investigating design and construction issues for precast concrete bridge over Bookookoorara creek

Rosnell, Alexander (2016) Investigating design and construction issues for precast concrete bridge over Bookookoorara creek. [USQ Project]

Investigating mechanisms for effluent pond sealing: the effect of suspended organic particulate on soil hydraulic conductivity

Warren, Bradley (2012) Investigating mechanisms for effluent pond sealing: the effect of suspended organic particulate on soil hydraulic conductivity. [USQ Project]

Investigating productivity of double slope solar still with sponge cubes

Tabwere, Rimeta (2019) Investigating productivity of double slope solar still with sponge cubes. [USQ Project]

Investigating the Beneficial Effects of Alternate Fines in Concrete

Carson, Matthew Glenn (2020) Investigating the Beneficial Effects of Alternate Fines in Concrete. [USQ Project]

Investigating the Transient Sonochemical Efficiency of a Magnetostrictive Transducer under Resonant Conditions

Barnes, Michael (2018) Investigating the Transient Sonochemical Efficiency of a Magnetostrictive Transducer under Resonant Conditions. [USQ Project]

Investigating the accuracy of terrestrial laser scanning within a rail environment

Agoritsas, Stavroula (2015) Investigating the accuracy of terrestrial laser scanning within a rail environment. [USQ Project]

Investigating the cause of Requests for Information (RFIs) in Civil Construction Projects

Black, Jared (2017) Investigating the cause of Requests for Information (RFIs) in Civil Construction Projects. [USQ Project]

Investigating the economic viability and methods of harvesting and storing Leucaena

Seiler, Emile (2006) Investigating the economic viability and methods of harvesting and storing Leucaena. [USQ Project]

Investigating the impact of the Request For Information process in construction

Dinsmore, Robert Colin (2013) Investigating the impact of the Request For Information process in construction. [USQ Project]

Investigating the life cycle costs of road culverts in difference asset management schemes

Lu, Peter (2019) Investigating the life cycle costs of road culverts in difference asset management schemes. [USQ Project]

Investigating the maintenance costs and condition states of deteriorated small road structures

Hadonou, Patient (2018) Investigating the maintenance costs and condition states of deteriorated small road structures. [USQ Project]

Investigating what effect two face measurement has on Reflectorless EDM with respect to angle of incidence and determining the critical incident angle

Martin, Brent (2019) Investigating what effect two face measurement has on Reflectorless EDM with respect to angle of incidence and determining the critical incident angle. [USQ Project]

Investigation in failure analysis and materials selection in total hip replacement prosthesis

Nguyen, Liem (2014) Investigation in failure analysis and materials selection in total hip replacement prosthesis. [USQ Project]

Investigation into ICSM’s guideline for conventional traverse surveys

Haskard, Rhys (2017) Investigation into ICSM’s guideline for conventional traverse surveys. [USQ Project]

Investigation into a fleet bearing monitoring system

Craig, Aston J. (2011) Investigation into a fleet bearing monitoring system. [USQ Project]

Investigation into implement status awareness for autonomous tractors

Green, Sam (2022) Investigation into implement status awareness for autonomous tractors. [USQ Project]

Investigation into reliability of AUSPOS coordinate data (specifically height)

Koschel, Michael (2009) Investigation into reliability of AUSPOS coordinate data (specifically height). [USQ Project]

Investigation into relocatable home design and construction

Fenn, Scott P. (2011) Investigation into relocatable home design and construction. [USQ Project]

Investigation into sub five minute time of concentration in urban drainage design

Blyth, Mitchell (2014) Investigation into sub five minute time of concentration in urban drainage design. [USQ Project]

Investigation into the Effect of Bonding Methods for 3D Printed Titanium in Scarf Ribbon Repairs with a Composite Parent

Wall, Nicholas (2020) Investigation into the Effect of Bonding Methods for 3D Printed Titanium in Scarf Ribbon Repairs with a Composite Parent. [USQ Project]

Investigation into the Influence of Double Bagging Processes on Co-cured Scarf Repairs

Mitchell, Riley Malcolm (2019) Investigation into the Influence of Double Bagging Processes on Co-cured Scarf Repairs. [USQ Project]

Investigation into the biochemical methane potential of abattoir wastewater

Bauer, Amelia (2011) Investigation into the biochemical methane potential of abattoir wastewater. [USQ Project]

Investigation into the causes and possible remedies for the registered surveyor shortage in regional Queensland

Day, Anthony (2009) Investigation into the causes and possible remedies for the registered surveyor shortage in regional Queensland. [USQ Project]

Investigation into the delamination of composite laminates on aircraft rudders due to fluid ingress and icing

Pike, Samuel (2015) Investigation into the delamination of composite laminates on aircraft rudders due to fluid ingress and icing. [USQ Project]

Investigation into the economic feasibility of grid-tied photovoltaic panel and storage systems

Graham, Sharon (2015) Investigation into the economic feasibility of grid-tied photovoltaic panel and storage systems. [USQ Project]

Investigation into the effect of materials and angle of incidence on reflectorless measurements

Becker, Keegan (2018) Investigation into the effect of materials and angle of incidence on reflectorless measurements. [USQ Project]

Investigation into the effect of partial cement replacement with waste ceramic powder on the brick-mortar bond

Visser, Tyson (2020) Investigation into the effect of partial cement replacement with waste ceramic powder on the brick-mortar bond. [USQ Project]

Investigation into the effectiveness of reflectorless technologies on structural surveillance monitoring

Hosking, Alan (2009) Investigation into the effectiveness of reflectorless technologies on structural surveillance monitoring. [USQ Project]

Investigation into the effects of microwave drying soil

McDonnell, Jessica (2017) Investigation into the effects of microwave drying soil. [USQ Project]

Investigation into the effects of stormwater attenuation within the lower third of a catchment on downstream waterways

Karaka, Jayden Manawa (2019) Investigation into the effects of stormwater attenuation within the lower third of a catchment on downstream waterways. [USQ Project]

Investigation into the flexural characteristics of cold formed steel filled with rubberised concrete

Heath, Brendon (2016) Investigation into the flexural characteristics of cold formed steel filled with rubberised concrete. [USQ Project]

Investigation into the impacts on 11kV feeder operation as a result of the increasing use of amorphous core transformers

Duffy, Michael Anthony (2012) Investigation into the impacts on 11kV feeder operation as a result of the increasing use of amorphous core transformers. [USQ Project]

Investigation into the limitation of measuring to 360 Degree prisms using automatic target recognition technology

McDonald, Matthew (2011) Investigation into the limitation of measuring to 360 Degree prisms using automatic target recognition technology. [USQ Project]

Investigation into the non-invasive monitoring of blood glucose levels in people with diabetes

Gillies, Ross Donald (2005) Investigation into the non-invasive monitoring of blood glucose levels in people with diabetes. [USQ Project]

Investigation into the performance of first flush systems for diesel engine based pollution on roof runoff

Hardy, Glen (2008) Investigation into the performance of first flush systems for diesel engine based pollution on roof runoff. [USQ Project]

Investigation into the placement and connection of permanent survey marks for cadastral surveys

Pinkham, Daniel (2004) Investigation into the placement and connection of permanent survey marks for cadastral surveys. [USQ Project]

Investigation into traffic controller health and safety at road works in Queensland

Dann, William (2013) Investigation into traffic controller health and safety at road works in Queensland. [USQ Project]

Investigation of Modern Wireless Communication Technologies to facilitate Distribution System SCADA as part of the Intelligent Grid in South-East Queensland

Leslie, Michael James (2018) Investigation of Modern Wireless Communication Technologies to facilitate Distribution System SCADA as part of the Intelligent Grid in South-East Queensland. [USQ Project]

Investigation of Potential Benefits of BIM to Provide Efficiencies in the AEC Industry

Eager, Drew (2021) Investigation of Potential Benefits of BIM to Provide Efficiencies in the AEC Industry. [USQ Project]

Investigation of TCP performance over wireless internet

Peh, Wee Liang (2004) Investigation of TCP performance over wireless internet. [USQ Project]

Investigation of Time of Concentration within a ballast track environment for efficient Storm Water Drainage

Lariviere, Bernard (2019) Investigation of Time of Concentration within a ballast track environment for efficient Storm Water Drainage. [USQ Project]

Investigation of Toowoomba intersection crashes

Sharp, Clayton Anthony (2006) Investigation of Toowoomba intersection crashes. [USQ Project]

Investigation of a new generation degradable implant material

Gustafson, Adrian Mark (2007) Investigation of a new generation degradable implant material. [USQ Project]

Investigation of a variable ride height suspension for an automobile

Walton, Joshua Graeme (2008) Investigation of a variable ride height suspension for an automobile. [USQ Project]

Investigation of construction practices and test procedures for road pavements on expansive subgrades

Walters, Kieren A. (2008) Investigation of construction practices and test procedures for road pavements on expansive subgrades. [USQ Project]

Investigation of cost and performance characteristic of photovoltaic panels

Bruce, Thomas (2011) Investigation of cost and performance characteristic of photovoltaic panels. [USQ Project]

Investigation of cyclist safety within the Brisbane Bicycle Hire Scheme

Green, Nathan Andrew (2013) Investigation of cyclist safety within the Brisbane Bicycle Hire Scheme. [USQ Project]

Investigation of dam wall deformation surveys

Lynch, Joshua David (2016) Investigation of dam wall deformation surveys. [USQ Project]

Investigation of digital audio manipulation methods

Trevorrow, B. (2013) Investigation of digital audio manipulation methods. [USQ Project]

Investigation of domestic water end use

Mead, Nicola (2008) Investigation of domestic water end use. [USQ Project]

Investigation of driver fatigue problems on the Oakey-Cooyar road

Li, David (2004) Investigation of driver fatigue problems on the Oakey-Cooyar road. [USQ Project]

Investigation of energy storage media to improve network voltage regulation

Camilleri, Heath A. (2014) Investigation of energy storage media to improve network voltage regulation. [USQ Project]

Investigation of factors influencing maximum biogas production of abattoir wastewater

Wicks, Jaymee (2013) Investigation of factors influencing maximum biogas production of abattoir wastewater. [USQ Project]

Investigation of high impact capacity composite material for civil infrastructure

Malvern, Jerome Liam (2010) Investigation of high impact capacity composite material for civil infrastructure. [USQ Project]

Investigation of life cycle management of electromagnetic flow meters

Shears, Steven Edward (2009) Investigation of life cycle management of electromagnetic flow meters. [USQ Project]

Investigation of low voltage regulation opportunities on the distribution network

Rosendale, Shaun (2016) Investigation of low voltage regulation opportunities on the distribution network. [USQ Project]

Investigation of methane production by anaerobic co-digestion of food waste, fats, oil & grease, and thickened waste activated sludge using Automatic Methane Potential Test System

Bahri, Nikita (2017) Investigation of methane production by anaerobic co-digestion of food waste, fats, oil & grease, and thickened waste activated sludge using Automatic Methane Potential Test System. [USQ Project]

Investigation of millimetre FMCW radar for improved situational awareness for fire fighting vehicles

Barrett, Matthew (2020) Investigation of millimetre FMCW radar for improved situational awareness for fire fighting vehicles. [USQ Project]

Investigation of next generation IEEE 802.11n wireless local area networks (WLAN)

Chan, Zee Hong (2009) Investigation of next generation IEEE 802.11n wireless local area networks (WLAN). [USQ Project]

Investigation of pavement design for low volume rural roads

Zanetti, Ashley (2010) Investigation of pavement design for low volume rural roads. [USQ Project]

Investigation of relationships between skid resistant deficient pavement and aggregate by GIS and statistical analysis

Clague, Stephen John (2005) Investigation of relationships between skid resistant deficient pavement and aggregate by GIS and statistical analysis. [USQ Project]

Investigation of road wearing surface systems for glue laminated softwood timber bridge decks

Cherry, Rebecca (2016) Investigation of road wearing surface systems for glue laminated softwood timber bridge decks. [USQ Project]

Investigation of scour mitigation methods for critical road structures

Chou Pei-Chen, Peggy (2016) Investigation of scour mitigation methods for critical road structures. [USQ Project]

Investigation of seepage in water supply distribution channels in St George, Queensland

Fairley, Melissa (2015) Investigation of seepage in water supply distribution channels in St George, Queensland. [USQ Project]

Investigation of shunt vehicle derailments

Langes, Chris (2013) Investigation of shunt vehicle derailments. [USQ Project]

Investigation of solar thermal energy alternatives and their applications to water heating and air cooling in the meat processing industry

Muller, Zach Anthony (2010) Investigation of solar thermal energy alternatives and their applications to water heating and air cooling in the meat processing industry. [USQ Project]

Investigation of tenable carbon monoxide and visibility level for a fired room

Ng, Hai Ching (2005) Investigation of tenable carbon monoxide and visibility level for a fired room. [USQ Project]

Investigation of the Methods of Testing Lead-Acid Battery Health by means of Discharge and Impedance Testing

Priebbenow, Paul (2010) Investigation of the Methods of Testing Lead-Acid Battery Health by means of Discharge and Impedance Testing. [USQ Project]

Investigation of the Riegl terrestial scanners - uses and limitations

Ling, Damian James (2009) Investigation of the Riegl terrestial scanners - uses and limitations. [USQ Project]

Investigation of the bearing capacity of shallow footings located near slopes

Watson, Joshua Francis (2008) Investigation of the bearing capacity of shallow footings located near slopes. [USQ Project]

Investigation of the best percentage by weight of glass powder as fillers, in phenolic resins using flexural tests

Zong, Xuejin (2008) Investigation of the best percentage by weight of glass powder as fillers, in phenolic resins using flexural tests. [USQ Project]

Investigation of the best percentage, by weight, of glass powder as filler in phenolic resin using three point bending test

Nixon, Robert Jeffrey (2008) Investigation of the best percentage, by weight, of glass powder as filler in phenolic resin using three point bending test. [USQ Project]

Investigation of the effect of Naturally Occurring Asbestos (NOA) on Civil Engineering Projects

Hignett, Logan John (2017) Investigation of the effect of Naturally Occurring Asbestos (NOA) on Civil Engineering Projects. [USQ Project]

Investigation of the effect of positive and negative crossfalls on road safety at roundabouts

Stanton, Vernon (2014) Investigation of the effect of positive and negative crossfalls on road safety at roundabouts. [USQ Project]

Investigation of the flexural strengthening of concrete beams using external prestressing

Davis, Shawn Wayne (2005) Investigation of the flexural strengthening of concrete beams using external prestressing. [USQ Project]

Investigation of the quality management system at Lockyer Valley Regional Council

Bichel, Mitchell Neil (2009) Investigation of the quality management system at Lockyer Valley Regional Council. [USQ Project]

Investigation of the quality of water treated by magnetic fields

McMahon, Craig Andrew (2009) Investigation of the quality of water treated by magnetic fields. [USQ Project]

Investigation of the quantity of error caused by vegetation coverage with UAV

Rudd, Nathan (2018) Investigation of the quantity of error caused by vegetation coverage with UAV. [USQ Project]

Investigation of the relationship between experimental bridge piers and erosion within a flow

Saunders, Michael Joseph (2009) Investigation of the relationship between experimental bridge piers and erosion within a flow. [USQ Project]

Investigation of the relationship between speed and separation width for head-on crashes in New South Wales

Epselis, Jonathan (2015) Investigation of the relationship between speed and separation width for head-on crashes in New South Wales. [USQ Project]

Investigation of the structural failure of plywood noise barriers

Davydov, Alexey (2011) Investigation of the structural failure of plywood noise barriers. [USQ Project]

Investigation of the suitability of finger jointed structural timber for use in nail plated roof trusses

Dakin, Anthony (2011) Investigation of the suitability of finger jointed structural timber for use in nail plated roof trusses. [USQ Project]

Investigation on Mechanical and Durability Properties of Recycled Concrete

Brady, Milasari (2020) Investigation on Mechanical and Durability Properties of Recycled Concrete. [USQ Project]

Investigation on reuse potential of laundry water for household garden irrigation in Toowoomba

Le, Minh N. (2005) Investigation on reuse potential of laundry water for household garden irrigation in Toowoomba. [USQ Project]

Investigation on the adequacy of disinfection in Toowoomba's water supply network

Huston, Thomas Clifford (2008) Investigation on the adequacy of disinfection in Toowoomba's water supply network. [USQ Project]

Investigation on the fatigue behaviour of pultruded fibre composites

Taylor, Alan Owen (2009) Investigation on the fatigue behaviour of pultruded fibre composites. [USQ Project]

Investigation on the management and maintenance of engineering assets of the biomedical industry

Devi, Ashtika (2017) Investigation on the management and maintenance of engineering assets of the biomedical industry. [USQ Project]

Investigation on the properties of concrete with Expanded Polystyrene

Singh, Anshdeep (2021) Investigation on the properties of concrete with Expanded Polystyrene. [USQ Project]

Investigation on utilising real time kinematic (RTK) global navigation satellite systems (GNSS) for electronic distance measurement (EDM) baseline calibration and traceability of measurement.

Bissett, Michael James (2008) Investigation on utilising real time kinematic (RTK) global navigation satellite systems (GNSS) for electronic distance measurement (EDM) baseline calibration and traceability of measurement. [USQ Project]

Investigations into Cambooya’s water supply pressure with respect to local contributing bores

Norman, Grant (2014) Investigations into Cambooya’s water supply pressure with respect to local contributing bores. [USQ Project]

Investigations into the effect of contaminants on permeable concrete effectiveness during its life cycle

Eaton, John (2015) Investigations into the effect of contaminants on permeable concrete effectiveness during its life cycle. [USQ Project]

Involvement of older drivers at crashes at unsignalised and signalised intersections

Porter, Hannah Elizabeth (2009) Involvement of older drivers at crashes at unsignalised and signalised intersections. [USQ Project]

Ipswich City Council development assessment: streamlining the process

Smith, Travis (2009) Ipswich City Council development assessment: streamlining the process. [USQ Project]

Ipswich City Council water supply infrastructure capacity high water usage and water meter accuracy

Martin, Christopher (2007) Ipswich City Council water supply infrastructure capacity high water usage and water meter accuracy. [USQ Project]

Irrigation performance and water use efficiency of turf production

Muller, Ben (2007) Irrigation performance and water use efficiency of turf production. [USQ Project]

Isolated grid solar-battery support for SWER

Timings, Philip (2015) Isolated grid solar-battery support for SWER. [USQ Project]

Issues with wireless 802.11 networks

Gray, Benjamin (2006) Issues with wireless 802.11 networks. [USQ Project]

Iterative decoding for error resilient wireless data transmission

Khan, Tawfiqul Hasan (2006) Iterative decoding for error resilient wireless data transmission. [USQ Project]

Key infrastructure review (Newcastle, NSW) vulnerability to a Tsunami

Couch, Greg (2015) Key infrastructure review (Newcastle, NSW) vulnerability to a Tsunami. [USQ Project]

Kinetic energy recovery in motor vehicles using compressed gas

Kruger, Rick William (2014) Kinetic energy recovery in motor vehicles using compressed gas. [USQ Project]

Land Preservation for Future TransportInfrastructure in Metropolitan Queensland

Li, J. (2020) Land Preservation for Future TransportInfrastructure in Metropolitan Queensland. [USQ Project]

Land Subsidence Detection and Monitoring Using InSAR in Australia

Cormick, Jacob (2019) Land Subsidence Detection and Monitoring Using InSAR in Australia. [USQ Project]

Laser Scanning, Reflectorless and Image Point Creation in the Built Environment

Allen, David (2017) Laser Scanning, Reflectorless and Image Point Creation in the Built Environment. [USQ Project]

Laser scanning for forest structure analysis

Coburn, Adam John (2014) Laser scanning for forest structure analysis. [USQ Project]

Coburn, Adam John (2014) Laser scanning for forest structure analysis. [USQ Project]

Latent Heat Storage in Solar Water Heating Systems

Elphick, James (2017) Latent Heat Storage in Solar Water Heating Systems. [USQ Project]

Lateral earth pressure problems involved with cantilever retaining structures and stability of those structures

Clayton, Scott (2014) Lateral earth pressure problems involved with cantilever retaining structures and stability of those structures. [USQ Project]

Launceston’s Combined Sewerage System – investigation and strategy development

Jessup, Cameron (2015) Launceston’s Combined Sewerage System – investigation and strategy development. [USQ Project]

Leadership and the development of Local Government Engineering Managers

Davis, Wesley (2018) Leadership and the development of Local Government Engineering Managers. [USQ Project]

Lessons Learnt from Bridge Reconstructions Post Successive Disaster Events in the Eurobodalla LGA

Sale, Maggie (2022) Lessons Learnt from Bridge Reconstructions Post Successive Disaster Events in the Eurobodalla LGA. [USQ Project]

LiDAR data for DEM generation and flood plain mapping

Burke, Maxwell James (2013) LiDAR data for DEM generation and flood plain mapping. [USQ Project]

LiDAR data for DEM generation and flood plain mapping

Topp, Michael James (2014) LiDAR data for DEM generation and flood plain mapping. [USQ Project]

Life cycle assessment (LCA) of liquefied natural gas (LNG) and its environmental impact as a low carbon energy source

Barnett, Paul Jonathan (2010) Life cycle assessment (LCA) of liquefied natural gas (LNG) and its environmental impact as a low carbon energy source. [USQ Project]

Life cycle assessment in electronics

Supurmaniam, Adrian (2004) Life cycle assessment in electronics. [USQ Project]

Life cycle assessment in semiconductor foundry

Ahmad, Abdul Hamid (2007) Life cycle assessment in semiconductor foundry. [USQ Project]

Life cycle assessment of CSR autoclaves lightweight concrete production in Malaysia

Wei, Lay Kian (2007) Life cycle assessment of CSR autoclaves lightweight concrete production in Malaysia. [USQ Project]

Life cycle assessment of a SAW filter

Mohan, Deepu (2006) Life cycle assessment of a SAW filter. [USQ Project]

Life cycle assessment of a mobile phone

Tan, Kevin Chin Ning (2005) Life cycle assessment of a mobile phone. [USQ Project]

Life cycle assessment of a personal computer

Hikwama, Baipaki Pakson (2005) Life cycle assessment of a personal computer. [USQ Project]

Life cycle assessment of cement in Malaysia

Ong, Chin How (2007) Life cycle assessment of cement in Malaysia. [USQ Project]

Life cycle assessment of the production of raw milk

Orphant, Simon (2004) Life cycle assessment of the production of raw milk. [USQ Project]

Life cycle assessment of ultra pure water plant in semiconductor industry

Supandy, Mohammed (2009) Life cycle assessment of ultra pure water plant in semiconductor industry. [USQ Project]

Life cycle maintenance of low volume roads in the Alice Springs region

Underhill, Richard (2004) Life cycle maintenance of low volume roads in the Alice Springs region. [USQ Project]

Lifecycle costs and maintenance of gross pollutant traps for rural local government areas

Gibbons, Benjamin (2017) Lifecycle costs and maintenance of gross pollutant traps for rural local government areas. [USQ Project]

Lifting mechanism of wheelchair

Teo, Chin Teng (2005) Lifting mechanism of wheelchair. [USQ Project]

Light Fidelity (Li-Fi) prototype with Raspberry Pi

Fergusson, Paul (2016) Light Fidelity (Li-Fi) prototype with Raspberry Pi. [USQ Project]

Linear Bending Behaviour of Functionally Graded Polymer Composite Beams Reinforced with Graphene Nanoplatelets

Coman, Aaron (2018) Linear Bending Behaviour of Functionally Graded Polymer Composite Beams Reinforced with Graphene Nanoplatelets. [USQ Project]

Literature review of advanced research and innovation in the mining industry

Booshand, Peter John (2007) Literature review of advanced research and innovation in the mining industry. [USQ Project]

Little streets in small cities: the role of laneway activation in regional Queensland CBD revitalisation

Dillon, Megan (2013) Little streets in small cities: the role of laneway activation in regional Queensland CBD revitalisation. [USQ Project]

Local and post-local buckling of steel tubes in thin-walled circular concrete-filed steel tubular columns

Walker, Craig Louis (2006) Local and post-local buckling of steel tubes in thin-walled circular concrete-filed steel tubular columns. [USQ Project]

Local government greenhouse gas abatement reporting

Graham, Kim (2011) Local government greenhouse gas abatement reporting. [USQ Project]

Localised geoid modelling using GPS and precise levelling data

Munro, Frazer (2009) Localised geoid modelling using GPS and precise levelling data. [USQ Project]

Locomotive cooling system strategy optimisation

Windebank, Mark (2014) Locomotive cooling system strategy optimisation. [USQ Project]

Long-term Flexural Performance of Epoxy-coated GFRP Composite Laminates

Pamogas, Nathan (2018) Long-term Flexural Performance of Epoxy-coated GFRP Composite Laminates. [USQ Project]

Lot Infiltration Trenches Impacts on Water Quality

Train, Aidan (2019) Lot Infiltration Trenches Impacts on Water Quality. [USQ Project]

Low Load Frequency Support Capability - Collie Power Station

Cornish, Alan Christian (2020) Low Load Frequency Support Capability - Collie Power Station. [USQ Project]

Low Velocity Projectile Impact Testing of the Thunderbolt Shield

Maunder, Brayden (2020) Low Velocity Projectile Impact Testing of the Thunderbolt Shield. [USQ Project]

Low cost passive radar through software defined radio

Ryan, M. J. (2016) Low cost passive radar through software defined radio. [USQ Project]

Low-Cost Slip Angle Sensor for Use in Analysing Vehicle Handling Characteristics

Evans, Travis (2017) Low-Cost Slip Angle Sensor for Use in Analysing Vehicle Handling Characteristics. [USQ Project]

Low-cost Firmness Based Avocado Ripeness Tester

Mathews, Jared (2019) Low-cost Firmness Based Avocado Ripeness Tester. [USQ Project]

Low-cost compact Modbus TCP based device configuration/interrogation tool

Picking, Ethan (2020) Low-cost compact Modbus TCP based device configuration/interrogation tool. [USQ Project]

Low-cost data logger for electrical respiration sensor

Guthrie, James Stuart (2021) Low-cost data logger for electrical respiration sensor. [USQ Project]

Low-cost eye tracker

Bradford, Thomas J. (2014) Low-cost eye tracker. [USQ Project]

Low-investment EMI pre-compliance for COTS technology insertion into submarine combat systems

Colagiuri, Luciano (2019) Low-investment EMI pre-compliance for COTS technology insertion into submarine combat systems. [USQ Project]

Lunar Resources: Geosensing for Autonomous Exploration

Francis, B. (2022) Lunar Resources: Geosensing for Autonomous Exploration. [USQ Project]

MATLAB based energy market simulator

Flynn, Christopher James (2012) MATLAB based energy market simulator. [USQ Project]

MUSIC model accuracy in predicting stormwater quality

Fletcher, Wade Daniel (2013) MUSIC model accuracy in predicting stormwater quality. [USQ Project]

Machine Vision for Locomotive Control

Wallin, Anthony (2021) Machine Vision for Locomotive Control. [USQ Project]

Machine data collection and analysis for system fault rectification

Johnston, Mitchell (2020) Machine data collection and analysis for system fault rectification. [USQ Project]

Machine vision and data acquisition for the optimisation of black soldier fly breeding

Kent, Mathew (2018) Machine vision and data acquisition for the optimisation of black soldier fly breeding. [USQ Project]

Machine vision and sensing with an Android

Field, Shaun (2015) Machine vision and sensing with an Android. [USQ Project]

Machine vision based traffic monitoring with real time tracking

Menetrier, Paul L. (2008) Machine vision based traffic monitoring with real time tracking. [USQ Project]

Machine vision detection of crop diseases

Stern, Nathan (2014) Machine vision detection of crop diseases. [USQ Project]

Make Garfield (6 axis robot arm) Smart through the design and implementation of voice recognition and control

Tonkin, Kyle (2013) Make Garfield (6 axis robot arm) Smart through the design and implementation of voice recognition and control. [USQ Project]

Management of Compost Amendments to Sustainable Sugarcane Under Marginal Quality Irrigation

Redmond, Thomas W. (2017) Management of Compost Amendments to Sustainable Sugarcane Under Marginal Quality Irrigation. [USQ Project]

Management of Unsealed Roads within the Narrabri Shire Council Local Government Area

Cain, Michael (2017) Management of Unsealed Roads within the Narrabri Shire Council Local Government Area. [USQ Project]

Management of low traffic volume roads unsealed road classification system

Hartwig, Andrew (2013) Management of low traffic volume roads unsealed road classification system. [USQ Project]

Management of physical assets at Purga Quarry

Crowe, Daniel Leigh (2007) Management of physical assets at Purga Quarry. [USQ Project]

Management of physical assets – advanced asset management planning

Magarry, Anthony John (2010) Management of physical assets – advanced asset management planning. [USQ Project]

Management of road reconstruction and repair following a flooding disaster

Olm, David William Charles (2011) Management of road reconstruction and repair following a flooding disaster. [USQ Project]

Management of unsealed roads in drought conditions

Dinham, Aaron (2019) Management of unsealed roads in drought conditions. [USQ Project]

Managing field moisture to reduce the soil compaction risk at cotton harvest

Roberton, Stirling (2015) Managing field moisture to reduce the soil compaction risk at cotton harvest. [USQ Project]

Managing product development process for time market

Leong, Suet-Leong (2006) Managing product development process for time market. [USQ Project]

Managing the repair of transport infrastructure after a natural disaster

Fitzgerald, Danial (2011) Managing the repair of transport infrastructure after a natural disaster. [USQ Project]

Mansell power lifter actuator failure analysis

Bailey, Donald (2016) Mansell power lifter actuator failure analysis. [USQ Project]

Mansell power lifter control circuitry redesign

Keys, Callum Kirby (2014) Mansell power lifter control circuitry redesign. [USQ Project]

Mapping and Spatial Analysis of Land Cover Dynamics of Threatened Grassland Ecosystems in the Condamine River Catchment

Alcorn, Matthew (2017) Mapping and Spatial Analysis of Land Cover Dynamics of Threatened Grassland Ecosystems in the Condamine River Catchment. [USQ Project]

Mapping changes in landscape-scale patterns of vegetation in coal seam gas development areas

Grigg, Andrew (2014) Mapping changes in landscape-scale patterns of vegetation in coal seam gas development areas. [USQ Project]

Mapping cycling pathways and route selection using GIS and GPS

Huntley, Matthew Mark (2010) Mapping cycling pathways and route selection using GIS and GPS. [USQ Project]

Mapping greens at City Golf Course

Reynolds, Wade (2006) Mapping greens at City Golf Course. [USQ Project]

Mapping of an old mine site for heritage purposes

Gibson, John Martin (2004) Mapping of an old mine site for heritage purposes. [USQ Project]

Mapping rollercoaster forces using acceleration and GNSS data

Montgomery, Zachary (2020) Mapping rollercoaster forces using acceleration and GNSS data. [USQ Project]

Mapping the distribution of general practitioners and their billing pattern in the Toowoomba District

Almenhali, Salem (2004) Mapping the distribution of general practitioners and their billing pattern in the Toowoomba District. [USQ Project]

Market segmentation for improved efficiency of Ipswich water supply system

Taylor, Oliver John (2009) Market segmentation for improved efficiency of Ipswich water supply system. [USQ Project]

Mathematical modelling of the nickel iron battery

Dethan, Jacob Febryadi Nithanel (2016) Mathematical modelling of the nickel iron battery. [USQ Project]

Measurement of fracture toughness, mechanical and electrical loss tangents of calcium carbonate reinforced vinyl ester composites

Eddine, Mustapha Jamal (2009) Measurement of fracture toughness, mechanical and electrical loss tangents of calcium carbonate reinforced vinyl ester composites. [USQ Project]

Measurement of waste in concrete construction using lean construction methodologies

Watson, George Kenneth (2014) Measurement of waste in concrete construction using lean construction methodologies. [USQ Project]

Measuring Changes in Sea Level Around Antarctica

Hobbs, Amy (2019) Measuring Changes in Sea Level Around Antarctica. [USQ Project]

Measuring and monitoring of grain silos using laser scanning and total stations

Kelman, Oliver (2008) Measuring and monitoring of grain silos using laser scanning and total stations. [USQ Project]

Measuring moisture content of biofilter media using capacitance

Lee, Boon Chong (2006) Measuring moisture content of biofilter media using capacitance. [USQ Project]

Measuring tree DBH & height by using terrestrial laser scanner for forest management

Kong, Weibin (2017) Measuring tree DBH & height by using terrestrial laser scanner for forest management. [USQ Project]

Measuring with Bees II: in home power and water monitoring

Tan, Yian Yian (2011) Measuring with Bees II: in home power and water monitoring. [USQ Project]

Mechanical Battery Designed for Domestic Solar Power Storage

Trangmar, Alex (2017) Mechanical Battery Designed for Domestic Solar Power Storage. [USQ Project]

Mechanical Behaviour of Wagners Composite Fibre Bridge Decking under Point Load Testing

Weise, Matt Ryan (2018) Mechanical Behaviour of Wagners Composite Fibre Bridge Decking under Point Load Testing. [USQ Project]

Mechanical and tribological performance of epoxy composites based on waste ceramic powder

Alfadhly, Saad (2017) Mechanical and tribological performance of epoxy composites based on waste ceramic powder. [USQ Project]

Mechanical behaviour of polymeric composition based on available natural fibres in Australia

Mandava, Jagan (2011) Mechanical behaviour of polymeric composition based on available natural fibres in Australia. [USQ Project]

Mechanical behaviours of grout for strata reinforcement

Alkandari, Hamed (2017) Mechanical behaviours of grout for strata reinforcement. [USQ Project]

Mechanical behaviours of grout mixed with fly ash for strata reinforcement

Ebrahim, Zainab Alsayed (2018) Mechanical behaviours of grout mixed with fly ash for strata reinforcement. [USQ Project]

Medication Robot (Path Finding)

Saleh, Ali (2017) Medication Robot (Path Finding). [USQ Project]

Methodology To Obtain Homogeneous Temperature Distribution Across A Revers Flow Offset Barbecue

Tait, Matthew (2019) Methodology To Obtain Homogeneous Temperature Distribution Across A Revers Flow Offset Barbecue. [USQ Project]

Methods of feeding out white cottonseed to livestock

Wooldridge, Damien Christopher (2014) Methods of feeding out white cottonseed to livestock. [USQ Project]

Micrographs of the fracture of vinyl ester composites cured by microwaves

Lee, Richard Anthony (2005) Micrographs of the fracture of vinyl ester composites cured by microwaves. [USQ Project]

Millmerran Power Station ROM coal blockage removal system

El Komy, Ahmed (2007) Millmerran Power Station ROM coal blockage removal system. [USQ Project]

Mine Subsidence Survey by UAV and Photogrammetry

Seymour, Jeremy (2017) Mine Subsidence Survey by UAV and Photogrammetry. [USQ Project]

MiniROV

Robe, Matthew (2014) MiniROV. [USQ Project]

Mobile manoeuvring robot

Free, Matthew (2006) Mobile manoeuvring robot. [USQ Project]

Mobile robot guidance and navigation

Airs, Leslie (2005) Mobile robot guidance and navigation. [USQ Project]

Modal testing of existing supermarket floor systems and predictive finite element modelling for better design

Hatch, Daniel Roy (2014) Modal testing of existing supermarket floor systems and predictive finite element modelling for better design. [USQ Project]

Model an inverter system with demand response capability aligned with the framework detailed in AS 4755.1:2017 using DIgSILENT PowerFactory modelling software

Ram, Asis (2018) Model an inverter system with demand response capability aligned with the framework detailed in AS 4755.1:2017 using DIgSILENT PowerFactory modelling software. [USQ Project]

Model and analysis of a broken conductor (source isolated) earth fault on radial 11kV distribution feeders

Geary, A. (2013) Model and analysis of a broken conductor (source isolated) earth fault on radial 11kV distribution feeders. [USQ Project]

Modelling Digital Cadastral Boundary for Building Subdivisions in Victoria

Lu, David (2018) Modelling Digital Cadastral Boundary for Building Subdivisions in Victoria. [USQ Project]

Modelling Tamworth regional council stormwater network

Harrison, Rodney James (2005) Modelling Tamworth regional council stormwater network. [USQ Project]

Modelling alternate approaches for calculating friction head loss in water distribution pipelines

Campbell, Alexander (2017) Modelling alternate approaches for calculating friction head loss in water distribution pipelines. [USQ Project]

Modelling and analysis of multi-junction photovoltaic cells using MATLAB/Simulink for the improvement of conversion efficiency

Laurent, Anthony (2016) Modelling and analysis of multi-junction photovoltaic cells using MATLAB/Simulink for the improvement of conversion efficiency. [USQ Project]

Modelling load balance type static var compensator control system response

Dawson, Kim Maree (2005) Modelling load balance type static var compensator control system response. [USQ Project]

Modelling of a Portable Air Conditioner

Carrie, Logan (2017) Modelling of a Portable Air Conditioner. [USQ Project]

Modelling supply channel seepage and analysing the effectiveness mitigation options

Taylor, David (2016) Modelling supply channel seepage and analysing the effectiveness mitigation options. [USQ Project]

Modelling the behaviour of floodways subjected to flood loadings

Cummings, Shane (2015) Modelling the behaviour of floodways subjected to flood loadings. [USQ Project]

Modelling water allocation increases using climate predictions

Verrall, Daniel Graham (2016) Modelling water allocation increases using climate predictions. [USQ Project]

Modernisation of an existing irrigation area

Dann, Jeffrey Michael (2009) Modernisation of an existing irrigation area. [USQ Project]

Modular robot communication interface

Stark, Kevin (2006) Modular robot communication interface. [USQ Project]

Monitoring Elderly Falls in the Home Using Computer Vision

Smith, Jabin (2021) Monitoring Elderly Falls in the Home Using Computer Vision. [USQ Project]

Monitoring and removal of natural organic matter (NOM) from Toowoomba water sources

McIntyre, Jamie (2015) Monitoring and removal of natural organic matter (NOM) from Toowoomba water sources. [USQ Project]

Monitoring of remote stock watering points by still images using UHF

Groves, Lachlan (2014) Monitoring of remote stock watering points by still images using UHF. [USQ Project]

Monitoring survey of heritage listed fencing using terrestrial laser scanners and CloudCompare software

Strange, Enoch Matthew (2019) Monitoring survey of heritage listed fencing using terrestrial laser scanners and CloudCompare software. [USQ Project]

Monitoring the Progress of Mine Site Vegetation Rehabilitation Using Satellite Imagery

Kingston, Mitchell (2017) Monitoring the Progress of Mine Site Vegetation Rehabilitation Using Satellite Imagery. [USQ Project]

Motorcycle safety in Malaysia

Tan, Kok Wei (2004) Motorcycle safety in Malaysia. [USQ Project]

Multi-Stations, Trimble SX10 laser scanning applications, capabilities and relevant accuracies

Godwin, Joshua (2017) Multi-Stations, Trimble SX10 laser scanning applications, capabilities and relevant accuracies. [USQ Project]

Multicore algorithms for image alignment

Ward, Tristan (2011) Multicore algorithms for image alignment. [USQ Project]

Multimedia database search techniques

Khan, Nizam (2005) Multimedia database search techniques. [USQ Project]

NSW Control Network: User Errors vs Network Errors Using CORSNet New South Wales

Nichol, Matthew (2017) NSW Control Network: User Errors vs Network Errors Using CORSNet New South Wales. [USQ Project]

Natural Language Processing to support Nurse-to-Patient allocation in acute care

Price, Daniel (2021) Natural Language Processing to support Nurse-to-Patient allocation in acute care. [USQ Project]

Natural disaster risk management in South Asia a dissertation

Hancock, Nashua Thomas (2014) Natural disaster risk management in South Asia a dissertation. [USQ Project]

Natural gas burner for copper smelter converter

Stansbie, Clayton Harley (2004) Natural gas burner for copper smelter converter. [USQ Project]

Near infrared photogrammetric technique on structure beam monitoring

Pratt, Daniel (2011) Near infrared photogrammetric technique on structure beam monitoring. [USQ Project]

Network Management of Low Volume Local Roads in NSW

Franzen, Thomas (2018) Network Management of Low Volume Local Roads in NSW. [USQ Project]